ReferenceDesignLibrary

Refine Search

Eval Board Purpose Component Count + Extras Features Data Rate Design Author
Clear
Clear
Clear
Clear
Clear
Clear
Clear All Selections Apply Filters

Designs (58)

58 Results - Page 1/6 |< < 1 2 3 4 5 > >|

EVAL-CN0160-EB1Z: Isolated USB Port

Manufacturer: Analog Devices Inc.

This application isolates a peripheral device that already supports a USB interface. Because the peripheral is not explicitly defined in this circuit, power to run the secondary side of the isolator has been provided as part of the solution. If the circuit is built onto the PCB of a peripheral design, power could be sourced from the peripheral’s off line supply, a battery, or the USB cable bus po…

View Design

EVAL-ADM2682EEBZ: Isolated RS-422/RS-485 & Power

Manufacturer: Analog Devices Inc.

The ADM2682E/ADM2687E evaluation board can be used for easy evaluation of the ADM2682E and ADM2687E power and signal isolated RS-485 transceivers. Screw terminal blocks provide convenient connections for the power and signal connections.

View Design

TIPD126: Bridge Sensor Conditioner

Manufacturer: Texas Instruments

This bridge sensor conditioner module delivers a well regulated current output to a ground-referenced load. The first stage uses a mixed-signal programmable gain amplifier (PGA) to provide linearization and temperature compensation to a differential bridge sensor voltage. The second stage converts the PGA output voltage into current and transmits the current over a standard 4 mA to 20 mA current …

View Design

TIPD108: PWM Signal Generator

Manufacturer: Texas Instruments

This circuit utilizes a triangle wave generator and comparator to generate a pulse-width-modulated (PWM) waveform with a duty cycle that is inversely proportional to the input voltage. An op amp and comparator generate a triangular waveform which is passed to the inverting input of a second comparator.

View Design

HD3SS6126: USB 3.0 KVM Switch

Manufacturer: Texas Instruments

This user's guide shows a USB 3.0 KVM switch application example of the HD3SS6126 device and provides recommendations for high-speed digital signal PCB design.

View Design

APP 4477: 1-Wire Bidirectional Voltage Translator

Manufacturer: Maxim Integrated

Devices such as FPGAs, microprocessors, the DS2482-100, and DS2480B are examples of 1-Wire master devices. The 1-Wire/iButton® slave devices are manufactured by Maxim and comprise an extensive family of parts that typically operate from 2.8V to 5.25V. The 1-Wire masters and slave devices have traditionally been 5V open-drain logic in the past.

View Design

UMFT234XD-WE: USB 2.0 to UART

Manufacturer: FTDI, Future Technology Devices International Ltd

The UMFT234XD is a breakout board that converts USB2.0 Full-Speed to UART. These modules do not have a USB connector, instead, the modules plug directly into the USB host connector and the pads of the PCB makes electrical contact with the electrical contacts of the USB connector.

View Design

ENC28J60-H: Ethernet Control Interface

Manufacturer: Olimex LTD

ENC28J60-H is world’s smallest Ethernet controller development board with its size of only 30x24 mm. It provides easy connection to any microcontroller with only a few parts via SPI which makes it perfect for adding Ethernet connectivity to embedded applications.

View Design

CYUSB3KIT-003: USB 3.0 Host/Controller

Manufacturer: Cypress Semiconductor Corp

Cypress EZ-USB® FX3™ (FX3) is an ARM-based controller designed to implement USB 3.0 peripherals. USB 3.0 offers the SuperSpeed signaling rate of 5 gigabits per second, which is 10 times greater than the high-speed signaling rate of 480 megabits per second. Because FX3 is USB 3.0 compliant, in addition to operating at the new SuperSpeed data rate, it can also operate at the High-Speed and Full-Spe…

View Design

MAXREFDES64#: 8-Ch Input Micro PLC Card

Manufacturer: Maxim Integrated

Industry 4.0 marks the fourth industrial revolution, characterized by distributed, intelligent control systems. Breaking from a past with large, centralized programmable-logic controllers, Industry 4.0 allows for highly configurable, highly modular factories, which accept an ever increasing number of sensor inputs while operating at a higher output than ever before. The ultra-small PLC, or Micro …

View Design
58 Results - Page 1/6 |< < 1 2 3 4 5 > >|