ReferenceDesignLibrary

Refine Search

IDE Speed Memory, Flash/RAM Digital I/O Analog Outputs (DACs) Analog Inputs Features Touch Sensing Pins Interrupt Pins Program/Debug Interface Interface I/O Voltage Input Voltage DMA Channels Radio
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear All Selections Apply Filters

Designs (17)

17 Results - Page 1/2 |< < 1 2 > >|

TM4C123GXL - LAUNCHPAD Tiva C

Manufacturer: Texas Instruments

The TM4C123G LaunchPad Evaluation Kit is a low-cost evaluation platform for ARM Cortex-M4F based microcontrollers from Texas Instruments. The design of the TM4C123G LaunchPad highlights the TM4C123GH6PM microcontroller with a USB 2.0 device interface and hibernation module.

View Design

Arduino Nano

Manufacturer: Arduino

The Arduino Nano is a compact board similar to the UNO., but in a much smaller form factor making it perfect for breadboarding or projects where size is important.

View Design

ESP8266 FEATHER HUZZAH

Manufacturer: Adafruit Industries LLC

This is the Assembled Adafruit Feather HUZZAH ESP8266 with headers - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging and ready to go immediately!

View Design

ESP32 FEATHER HUZZAH

Manufacturer: Adafruit Industries LLC

The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer charger, and just about all of the GPIOs brought out so you can use it with any of our Feather Wings.

View Design

Adafruit Feather M0 Adalogger

Manufacturer: Adafruit Industries LLC

This is the Adafruit Feather M0 Adalogger - our take on an 'all-in-one' Cortex M0 datalogger (or data-reader) with built in USB and battery charging. It's an Adafruit Feather M0 with a microSD holder ready to rock!

View Design

ARDUINO MEGA 2560 REV3

Manufacturer: Arduino

The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.

View Design

Teensy 3.5

Manufacturer: SparkFun Electronics

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.5 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: no external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for it!

View Design

Teensy 3.6

Manufacturer: SparkFun Electronics

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.6 comes pre-flashed with a bootloader so you can program it using the onboard USB connection; no external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for it!

View Design

Teensy-LC

Manufacturer: SparkFun Electronics

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy LC (Low Cost) is a 32 bit microcontroller board that provides you with an uncomplicated option for getting started with the Teensy line of products without breaking the bank!

View Design

Teensy++ 2.0

Manufacturer: SparkFun Electronics

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy++ breaks out all of the IO available on the AT90USB1286 to breadboard-friendly 0.1" spaced headers so you can hook up a load of peripherals.

View Design
17 Results - Page 1/2 |< < 1 2 > >|