Active Components
Panasonic’s Active Components such as Relays, DC Contactors, Switches, Connectors and Semiconductor can meet the needs of any design challenge. The high-quality components help customers keep their design cutting edge while reducing design time. Choose from a broad range of Panasonic Active Components available immediately off the shelf at Digi-Key. Make your product powered by Panasonic today!
- Relays
- DC Contactors
- Switches
- Connectors
- Semiconductors
LZ-N Series General Power Relays 
Panasonic’s LZ-N Relays have the optimized pin-compatibility of the LZ relay. The normally open contact and the change-over contact can switch loads up to 16 A/250 V at ambient temperatures of up to +105°C.
New Product Introduction: LZ-N Series General Power Relays
View Details Learn More
Features
- 16 A switching current, 250 VAC switching voltage
- Contact arrangement: 1 Form A contact or 1 Form C
- Contact material: AgSnO2
- Compact design (W x L x H): 12.5 mm x 28.8 mm x 15.7 mm
- Breakdown voltage between contacts and coil: 5,000 VRMS
- Air and creepage distance between contacts and coil: 10 mm minimum
- Certification according to VDE, UL/C-UL
Applications
- Household electrical appliances
- Office equipment
- Industrial equipment
AQV25_G3 Series PhotoMOS® Relays 
Panasonic's AQV25_G3 Series high capacity PhotoMOS Relays provide significantly increased load current in a compact DIP package along with a continuous load current of up to 3.5 A.
New Product Introduction: AQV25_G3 Series PhotoMOS® Relays
View Details Learn More
Features
- High Capacity Switching
- Continuous Load Current: Max. 3.5 A
- Load Voltage: 60 V and 100 V
- Low On-Resistance and High Sensitivity
- Dual Packaging Options
- RoHS/REACH Compliant
Benefits
- Faster Turn On Time
- Available In Both Tube And Tape/Reel Packaging.
- Low On Resistance (Typ. 33 mΩ, AQV252G3)
- Specifications Allow Use In Place Of Mercury And Mechanical Relays
EV Series 
Panasonic’s EV Series DC Contactors are essentially Relays that combine compact design with cutoff at high DC voltages - something that Panasonic has achieved through contact technology with sealed capsules containing hydrogen gas. They are an eco-friendly design in choice for mobility applications
View Details
Features
- Compact And Lightweight High-Voltage Cutoffs
- Safely Encased
- Highly Reliable Contact
- Dustproof
Applications
- High DC voltage applications
- Electric vehicle
- Hybrid vehicle
- Fuel cell vehicle
- Battery charge and discharge systems
- Construction equipment
EP Series 
Panasonic’s EP Series DC Contactors are high-voltage, high-current control capable offering a high capacity of maximum 1,000 Volt DC cutoff. These DC Contactors are compact and generate little operating sound, even when large currents are cut off.
View Details
Features
- Sealed - hermetically
- High voltage, high current control capable
- Compact and low operating sound
- Arc space unnecessary
- Safety
- High contact reliability
- Mounting direction is not specified
- Wide selection of models available
- Standard compliance
Benefits
- Solar power generation systems
- Cogenerations systems
- Construction machinery
- Welding equipment
- Battery charge and discharge control
- AGV
- Inverter control
- Elevator
ABS Series IP67 Rated Sealed Turquoise Switches 
Panasonic’s ABS Series Sealed Switches are offered with or without lever, roller lever, simulated roller lever, or plunger for any design needs. They are perfect for either high or low volume designs requiring proven Panasonic quality and where water and dust protection are required.
View Details Learn More
Features
- Subminiature size, high sealing performance
- Elastomer double molding technology for steady sealing quality
- Superior operating position precision
Applications
- Automotive detection of door opening and closing
- Vacuum cleaners
- Air purifiers
- Gas cooking ranges
EVP-AT Series Light Touch Switch 
Panasonic’s EVP-AT Series Light Touch Switch features a low profile at 3.4 mm x 1.7 mm, this switch features a dome behind the actuator and is IP67 rated.
New Product Introduction: EVP-AT Series Side-Operational, Edge-Mount Light Touch Switch
View Details Learn More
Features
- Low profile: 3.4 mm x 1.7 mm (excluding the push plate), height 1.6 mm (printed circuit board being as low as 1.105 mm)
- Dome behind actuator
- Laser-welded technology
- Edge-mount design
- IP67 rated
- RoHS and REACH Compliant
Applications
- For portable electronic equipment
- Wearables
- Blood glucose meters
A35UH Board-to-FPC High Current Connectors 
Panasonic's A35UH series connectors allow devices to be designed thinner due to a low-profile mated height of 0.6 mm. The A35UH series also supports a maximum of 5 A that can be supplied to the power terminals to allow for a reduction in the number of power line pins and contributes to space savings.
New Product Introduction: A35UH Series Board-To-FPC High Current Stacking Connectors
View Details Learn More
Features
- Slim, low-profile design: 0.6 mm mated height with 2.2 mm width
- Supports 5 A power terminals
- "Tough Contact" structure provides a slim, low-profile design resistant to various environmental conditions
Applications
- Smart phones
- Wearable devices
- Tablets/PDAs
B02 Series Board-To-FPC Connectors 
The new B02 Series Connectors allow devices to be designed thinner due to their low profile mated height of 0.7mm and their miniature design provides board space savings.
New Product Introduction: B02 Series Board-To-FPC High Current Stacking Connectors
View Details
Features
- Slim, Low Profile Design: 0.7 mm Mated Height
- High Current Rating: 10 A (5.0 A/Pin x 2 Pins)
- High Insertion Force: 40 Newtons
- High Removal Force: 10 Newtons
- Insertion Guides And Click Feel
- Extra 4 Pins For Signal Lines (0.3 A Each)
- RoHS/REACH Compliant
Applications
- Wearable devices
- Portable devices
- Battery accessories
- Consumer devices
NN3100xA Series Single-Chip PSiP 
Panasonic’s NN3100xA Series power supply in package (PSiP). Featuring a small 8.5 mm x 7.5 mm x 4.7mm QFN package, the NN3100xA series is a single-channel, synchronous DC-DC step-down regulator PSiP. As a single-chip solution, this series integrates a controller IC that employs a hysteretic control system, two power MOSFETs, an inductor and capacitors.
View Details Learn More
Features
- High-speed response DC-DC step-down regulator circuit that employs hysteretic control system
- Built-in MOSFETs, inductor, and capacitors
- 10 A maximum output current (NN31000A-BB)
- Input voltage range: PVIN = AVIN = 4.5 V to 28 V
- Output voltage range: 0.6 V to 5.5 V
- RoHS- and REACH-compliant
Applications
- DSP and FPGA point-of-load applications
- Routers
- Computer servers
- Surveillance cameras
FJ3P02100L and FK3P02110L Series Power CSP MOSFETs 
Panasonic’s the FJ3P02100L and FK3P02110L series of power CSP MOSFETs features Power Mount CSP Packaging (PMCP) that is comprised of a unique pad design and drain clip technology. This allows for a 5% improvement in thermal dissipation while simultaneously reducing the size by 80% over the conventional solutions.
View Details Learn More
Features
- Power mount CSP (PMCP) package allows for improved thermal dissipation by 5% while reducing the size by 80% over the conventional solutions
- AEC-Q101 qualified
- Fine trench silicon technology provides 47% lower RDS(on) over the same sized conventional chip, achieving higher power efficiency while reducing power consumption of the system
- Size: FJ3P02100L: 2.0 x 2.0 x 0.33 mm, FK3P02110L: 1.8 x 1.6 x 0.33 mm
- RDS(on): FJ3P02100L: 9.5 mΩ at VGS=4.5 V (typ.), FK3P02110L: 12.5 mΩ at VGS=2.5 V (typ.)
- Halogen free and RoHS qualified, with lead-free solder bumps
Canada