ReferenceDesignLibrary

UM232H-B: USB to UART, SPI, I2C, 245 FIFO, FT1248

Summary

The UM232H-B is a development module for FTDI’s FT232H Hi-speed to serial/parallel interface converter. This single channel IC can be configured to transfer data over the following interfaces: UART, 245 FIFO, FT1248, I2C, SPI, and GPIO.

For detailed information on the FT232H, refer to the FT232H datasheet.

This hardware is a breakout board that converts high-speed USB2.0 to a serial/parallel interface and connects the signals to a receptacle. No USB connector is used, instead this module plugs directly into the USB host connector and the pads of the PCB make electrical contact with the host USB connector.

All signals on this module operate at +3.3 V voltage levels, however all I/Os are 5 V tolerant.

Specifications

Manufacturer FTDI, Future Technology Devices International Ltd
Category Wired Communication
Sub-Category Interface Solutions
Eval Board Part Number 768-1159-ND
Eval Board Supplier FTDI, Future Technology Devices International Ltd
Eval Board Normally In Stock
Purpose USB to FIFO
USB to I2C
USB to Serial/parallel break-out
USB to SPI
USB to UART
Component Count + Extras 32 + 3
Data Rate 480 Mbps (USB 2.0 High Speed)
Features I²C Interface
Serial I/O
SPI Interface
UART Interface
USB Interface
Design Author FTDI
Main I.C. Base Part FT232H

Share This Design

Eval Board

Order a fully assembled board:

Quantity Available: 271

Quantity:

Media