Design contains obsolete parts

STEVAL-ISB045V1: 2.5W Wireless Charger Transmitter Evaluation Kit

Summary

The STEVAL-ISB045V1 evaluation kit includes the STEVAL-ISB045V1T wireless battery charger transmitter evaluation board based on the STWBC-WA digital controller, the firmware and the STEVAL-WBCDNGV1 USB-to-UART dongle needed to use the STSW-STWBCGUI.

The STEVAL-ISB045V1 firmware offers you the flexibility of modifying LEDs or GPIO behavior and customizing I²C and UART signals.

Tools for the STEVAL-ISB045V1 evaluation kit are available on www.st.com and allow you to access run time information such as regulation error, frequency or protocol status.

Key Features"

STWBC-WA digital controller
2.5 W output power
Resistive and capacitive modulation
Foreign object detection (FOD)
Active presence detector
Turn-key and firmware APIs

Specifications

Manufacturer	STMicroelectronics
Category	Power Management
Sub-Category	Inductive Charging / Wireless Power
Eval Board Part Number	497-18036-ND
Eval Board Supplier	STMicroelectronics
Eval Board	Board not Stocked
Voltage Out	5 V
Current Out	250 mA
Protocol	Inductive, Qi-Compliant
Voltage In	5 V
Current In	1 A
Standard(s)	Qi Compatible
Features	ADC's for Sensor Reading Foreign Object Detection (FOD) GUI / Design Software I²C Interface Memory Available On-Board Royalty-Free Drivers UART Interface USB Interface
Frequency	110 ~ 205 kHz
No-load Input Power @ Conditions	1.6mW @ 5V in
Efficiency @ Conditions	>65%, 5V @ 1.75 ~ 2.5 W
Component Count + Extras	67 + 15
Design Author	STMicroelectronics
Main I.C. Base Part	STWBC-WA
Date Created By Author	2018-05
Date Added To Library	2018-06