CAD | USD
  • Preferred Supplier

3M

Image of 3M's Ribbon Cable

Ribbon Cable Assemblies

3M's ready-to-use harnesses are assembled from .050" pitch flat ribbon cable terminated to industry-standard wire-mount IDC sockets from 3M.

Image of 3M's 7700 Series Controlled Impedance

7700 Series Controlled Impedance Cable

The 3M 7700 series cable offers engineers a viable option that fits between standard ribbon and twin axial cable, but with greatly improved performance.

Image of 3M's EMI/RFI Absorbers

EMI/RFI Absorbers

3M's EMI/RFI absorbers include the AB5000, AB6000, and AB7000 series and are designed to eliminate noise from a few hundred megahertz to multiple gigahertz frequencies.

Tools and Support

Featured Videos

Cubitron II Abrasive Belt line - Engineered for Demanding Industrial Environments
3M™ PSA Electrically Conductive Tape | Digi-Key Daily
Designing a Vibration Isolation Solution (Part 3): Transmissibility
Designing a Vibration Isolation Solution (Part 1): Modulus & Shape Factor
View All

Recent PTMs

10 minutes
ISODAMP™ Material Selection
A guide to selecting the best ISODAMP­™ damping elastomer for the design engineer's application.
10 minutes
Power Clamp System
CC-Link is the high-speed field network which can simultaneously handle both control and information data flows
10 minutes
Round Conductor Flat, Controlled Impedance Cable, 7700 Series
An overview of the 7700 series ribbon cable, highlighting key product features and typical applications.
15 minutes
Thermally Conductive Interface Materials
3M provides thermally conductive tape, pads, grease and adhesives.
10 minutes
Wire-to-Board System, 1.27 mm, 450 Series
A complete end-to-end interconnection system for wire-to-board applications.
5 minutes
Twin Axial Cable Assembly for PCI Express Extended Card Applications
Simplifies wire management, allowing air to flow without obstructions and increases performance and transforms management of connecting cable wiring harnesses.
View All

About 3M

3M offers innovative solutions to the electronics industry and is a leading manufacturer of interconnect solutions for board-to-board, wire-to-board, backplane and input/output (I/O) applications. These include 3M™ Wiremount Insulation Displacement Contact (IDC) Connectors, Mini Delta Ribbon (MDR) I/O System, Mini-Clamp Discrete Wire System, MetPak™ High Speed Hard Metric (HSHM) and the new Ultra Hard Metric (UHM) Backplane Connectors. Using industry leading capabilities in CAD - such as NX™ and SLA modeling - 3M's experienced engineers turn ideas into real world solutions.

3M offers solutions for printed circuit board fabrication, board assembly and test, such as adhesives and tapes, embedded capacitor materials, Textool™ Test and Burn-in Sockets, carrier and cover tapes and trays, flexible circuits, and products for reducing electrostatic discharge. 3M also offers solutions for shielding from EMI/RFI, for thermal management and vibration damping, as well as for packaging and labeling.

Additional Content

3M TOUCH SUCCESS STORIES

ADDITIONAL INFORMATION