Service Robot and Drone Connector Solutions

Robotics

Hirose offers a wide selection of interconnects for use in various robotics applications, including industrial, service, assistive robots, and drones. Industrial factory automation applications include handling, welding, assembly, dispensing, and other functions. Service robots are commonly used for cleaning and other household chores, serving food and drinks to people, in scientific laboratories, and to perform tasks in harsh environments such as space or extremely cold areas. Assistive robotics help the disabled to perform tasks or movements such as walking or using a limb, and they can also act as a service robot. Remote controlled drones can be used to transport small items through the air and for aerial surveillance and photography. Hirose's connectors for robotics include board-to-board, wire-to-board, coaxial, FPC/FFC, in-line and interface connectors.

Service Robots

Cleaning Robotics

Drones

We offer a wide variety of Board-to-Board connectors such as floating, space-saving, and ribbon cable connectors.

FX30B Series - 3.81 mm Pitch
	Contact pitch: 3.81 mm (7.62 mm for skipped pin type) Current capacity: 13 - 17 Amps per pin Mating alignment error: ±0.3 mm Connection type: coplanar, right angle, parallel (20 - 30 mm) Number of positions: 2, 3, 4, 5 Superior contact reliability is achieved by employing an independent four-point contact spring structure
Floating Design

HIF3 Series - 2.54 mm Pitch
	Contact pitch: 2.54 mm Current capacity: 1 Amp per pin Dual Contacts Connection type: coplanar, right angle, parallel (12 - 17 mm) Number of positions: 6 - 64

FX2 Series - 1.27 mm Pitch
	Contact pitch: 1.27 mm Current capacity: 0.5 Amps per pin Connection type: coplanar, right angle, parallel (12 - 16 mm) Number of positions: 20 - 120

FX18 Series - 0.8 mm Pitch
	Contact pitch: 0.8 mm Current capacity: 0.5 Amps per pin Power/Signal Hybrid: 3 Amps per pin Connection type: coplanar, right angle, parallel (10 - 45 mm) High-speed transmission up to 10 Gbps Effective mating length of signal contact: 2.0 mm Ground contact to enhance grounding Large mating guide for easy mating Number of positions: 40, 60, 80, 100, 120, 140
High-speed Transmission 10 Gbps

FX20 Series - 0.5 mm Pitch
	Contact pitch: 0.5 mm Floating range; X direction: ± 0.6 to 0.8 mm, Y direction: ± 0.6 mm Current capacity: 0.5 Amps per pin Connection type: right angle, parallel (15 - 30 mm) Dual contacts Self aligning and self-guiding Number of positions: 20, 40, 60, 80, 100 120 and 140
Floating Design

FX23 Series - 0.5 mm Pitch
	Contact pitch: 0.5 mm Current capacity: 0.5 Amps per pin Connection type: right angle, parallel (15 - 30 mm) Power/Signal Hybrid: 3 Amps/pin ±0.6 mm max floating in the X and Y directions Number of positions: 20, 40, 60, 80, 100, 120
Floating Design \| High-speed Transmission 10 Gbps

DF12 Series - 0.5 mm Pitch
	Contact pitch: 0.5 mm Current capacity: 0.3 Amps per pin Number of positions: 10 - 80 Parallel mating (3 - 5 mm)

DF37 Series - 0.4 mm Pitch
	Contact pitch: 0.4 mm Current capacity: 0.3 Amps per pin Effective mating length of signal contact: 0.25 mm Ground contact enhances grounding Large mating guide for easy mating Number of positions: 40, 60, 80, 100, 120, 140 Dual contacts Parallel mating (1 - 1.5 mm)

DF40 Series - 0.4 mm Pitch

Contact pitch: 0.4 mm
Current capacity: 0.3 Amps per pin
Number of positions:10 - 100
Depth: 3.38 mm
Self aligning and self-guiding
Parallel mating (1.5 - 4 mm)

Despite the connectors' small size and low profile the contacts provide strong contact forces and long contact wipe (0.45 mm), guaranteeing reliable electrical and mechanical performance.

BM20 Series - 0.4 mm Pitch
	Contact pitch: 0.4 mm Current capacity: 0.3 Amps per pin Number of positions: 10, 20, 24, 30, 34, 40 and 50 Depth: 2.3 mm Self aligning and self-guiding Dual contacts Parallel mating (0.6 - 0.8 mm)

Our RF connectors are designed for use in a variety of applications and markets.

U.FL Series
	2.0 mm/2.5 mm maximum mated height Frequency: DC to 6 GHz VSWR: 1.4 max Plug: right angled Receptacle: SMT

W.FL Series
	1.55 mm maximum mated height Frequency: DC to 6 GHz VSWR: 1.4 max Plug: right angled Receptacle: SMT

W.FL2 Series
	1.3 mm maximum mated height Frequency: DC to 6 GHz VSWR: 1.4 max Plug: right angled Receptacle: SMT

X.FL Series
	Max 1.0 mm mated height Φ0.81 mm cable type VSWR: 1.3 max (-3GHz), 1.4 max (-6GHz) Φ1.13 mm cable type VSWR: 1.3 max (-3GHz), 1.4 max (-6GHz), 1.7 max (-12GHz) User Friendly: clicks in when fully mated

Hirose's diverse FPC connectors offer a variety of features such as space-saving low profile, with a pitch range from 0.3 mm to 0.5 mm.

FH28 Series - 0.5 mm Pitch
	Contact pitch: 0.5 mm Number of positions: 10 - 80 Height: 2.54 mm Locking feature: front flip (ZIF) Contact surface: bottom Contact finish: gold FPC/FFC thickness: 0.3 mm Optional FPC/FFC ear tab

FH52 Series - 0.5 mm Pitch

Contact pitch: 0.5 mm
Number of positions: 6 - 68
Height: 2 mm
Locking feature: front flip (ZIF)
Contact surface: bottom
Contact finish: gold
FPC/FFC thickness: 0.3 mm
Optional FPC/FFC ear tab

View FH52 Connector Insertion Video

FH33 Series - 0.5 mm Pitch
	Contact pitch: 0.5 mm Number of positions: 4 - 65 Height: 1.2 mm Locking feature: front flip (ZIF) Contact surface: bottom Contact finish: gold FPC/FFC thickness: 0.3 mm

FH34SRJ Series - 0.5 mm Pitch
	Contact pitch: 0.5 mm Number of positions: 4 - 50 Height: 1 mm Locking feature: back flip (ZIF) Contact surface: top and bottom Contact finish: gold FPC/FFC thickness: 0.3 mm

FH19 Series - 0.5 mm Pitch
	Contact pitch: 0.5 mm Number of positions: 4 - 50 Height: 0.9 mm Locking feature: front flip (ZIF) Contact surface: bottom Contact finish: gold FPC/FFC thickness: 0.2 or 0.3 mm Optional FPC/FFC ear tab (7, 10, 16 pin)

FH26 Series - 0.3 mm Pitch
	Contact pitch: 0.3 mm Number of positions: 13 - 71 Height: 1 mm Locking feature: front flip (ZIF) Contact surface: bottom Contact finish: gold FPC/FFC thickness: 0.2 ±0.03 mm

FH35C Series - 0.3 mm Pitch
	Contact pitch: 0.3 mm Number of positions: 9 - 61 Height: 0.9 mm Locking feature: back flip (ZIF) Contact surface: top and bottom Contact finish: gold FPC/FFC thickness: 0.2 mm

With a wide variety of Wire-to-Board connectors, we offer features such as high-power, robustness, and low profile.

DF60 Series - 10.16 mm Pitch
	Contact pitch: 10.16 mm Number of positions: 1 - 6 Current capacity: 25 to 45 Amps per pin; depends on configuration and wire size Multi-point contacts Polarization Key Center Lock Wire size: 8 - 12 AWG (crimp) Vertical, right angle, in-line UL and TÜV certified

DF22 Series - 7.92 mm Pitch
	Contact pitch: 7.92 mm Number of positions: 1 - 5 Current capacity: 13 to 30 Amps per pin; depends on configuration and wire size Multi-point contacts Polarization Key Center Lock Potting Wire size: 10 - 16 AWG (crimp) Vertical, right angle, in-line UL,C-UL,TÜV

DF63 Series - 3.96 mm Pitch
	Contact pitch: 3.96 mm Number of positions: 1 - 6 Current capacity: 9 to 15 Amps per pin; depends on configuration and wire size Multi-point contacts Polarization Key Center Lock Potting Wire size: 16 - 18 AWG (crimp) Vertical, right angle, in-line UL,C-UL certified, TÜV Pending

DF33C Series - 3.3 mm Pitch
	Contact pitch: 3.3 mm Number of positions: 2 - 12 Current capacity: 4 to 5 Amps per pin; depends on configuration and wire size Polarization Key Center Lock Potting Wire size: 20 - 22 AWG (crimp) Vertical connection UL and C-UL pending

DF1B Series - 2.5 mm Pitch
	Contact pitch: 2.5 mm Number of positions: 2 - 40 Current capacity: 0.5 to 3 Amps per pin; depends on configuration and wire size Potting Wire size: 20 - 30 AWG (crimp) Vertical, right angle, in-line UL, CSA

DF11 Series - 2.0 mm Pitch
	Contact pitch: 2.0 mm Number of positions: 4 - 32 Current capacity: 0.5 to 2 Amps per pin; depends on configuration and wire size Wire size: 22 - 30 AWG (crimp) 26 AWG (IDC) Vertical, right angle, in-line UL, CSA

DF65 Series - 1.7 mm Pitch
	Contact pitch: 1.7 mm Number of positions: 3, 4, 5, 6, and 7 Current capacity: 0.5 to 2 Amps per pin; depends on configuration and wire size Wire size: 24 - 28 AWG (crimp) Vertical mating, right angle connection UL pending

DF57H Series - 1.2 mm Pitch

Contact pitch: 1.2 mm
Number of positions: 2 - 6
Current capacity: 0.5 to 2.5 Amps per pin; depends on configuration and wire size
Multi-point contacts
Wire size: 26 - 34 AWG (crimp)
Right angle mating
UL, CSA

View DF57 Swing Lock Connector Video

DF50 Series - 1 mm Pitch
	Contact pitch: 1 mm Number of positions: 2 - 50 Current capacity: 1 Amp per pin Wire size: 28 - 32 AWG (crimp) Center lock Vertical, right angle mating

DF80 Series - 0.5 mm Pitch
	Contact pitch: 0.5 mm Height: 1.72 mm Number of positions: 30, 40, 45 and 50 Current capacity: 0.1 to 0.5 Amps per pin depends on wire type and size Wire size: 40 - 46 AWG coaxial cable, 32 - 36 AWG discrete cable Right angle mating

DF36 Series - 0.4 mm Pitch
	Contact pitch: 0.4 mm Height: 1.5 mm Number of positions: 15 - 50 Current capacity: 0.20 to 0.25 Amps per pin; depends on wire size Wire size: 42 - 46 AWG coaxial cable, max. 0.33 mm diameter discrete cable Right angle mating

DF81 Series - 0.4 mm Pitch
	Contact pitch: 0.4 mm Height: 0.9 mm Number of positions: 30 - 50 Current capacity: 0.15 to 0.8 Amps per pin; depends on wire type and size Wire size: 36 - 46 AWG coaxial cable, 34 - 36 AWG discrete cable Right angle mating

Our In-line connectors include features such as water proof/water resistant, high-power, and the ability to wire inside narrow conduit.

HR10A Series
	Number of positions: 4 - 20 Current capacity: 2 Amps per pin Outer diameter: 11.5 to 19.0 mm; depends on position # Wire size: 26 - 30 AWG (crimp), solder pot 0.5 mm (solder) Fastening type: push-pull

HR25A Series
	Number of positions: 4 - 20 Current capacity: 1 Amp per pin Outer diameter: 11.8 to 13.8 mm; depends on position # Wire size: 30 AWG (crimp), solder pot 0.5 mm (solder) Fastening type: push-pull

HR30 Series
	Number of positions: 3 - 12 Current capacity: 2 to 5 Amps per pin depends on pos # Outer diameter: 12.6 to 15.5 mm; depends on position # Wire size: 26 - 30 AWG (crimp), solder pot 0.6 - 1.1 mm depends on position # (solder) Fastening type: Push-pull Waterproof (IP68)

DF60 Series - 10.16 mm Pitch
	Contact pitch: 10.16 mm Number of positions: 1 - 6 Current capacity: 25 to 45 Amps per pin; depends on configuration and wire size Polarization key Multi-point contacts Center lock Wire size: 8 - 12 AWG (crimp) Vertical, right-angle, in-line mating UL, C-UL, TÜV

DF62 Series
	Grid pattern: 2.2 x 2 mm Number of positions: 3, 4, 5, 6, 7, 13 and 24 Current capacity: 1 to 4 Amps per pin; depends on configuration and wire size Wire size: 22 - 26 AWG (crimp) Fastening type: center lock

DF62W Series
	Grid pattern: 2.2 x 2.2 mm Number of positions: 2 - 9 Current capacity: 1 to 3 Amps per pin; depends on configuration and wire size Wire size: 22 - 26 AWG (crimp) Fastening type: center lock Waterproof

DF63 Series - 3.96 mm Pitch
	Contact pitch: 3.96 mm Variations: 1 to 6 positions in straight, right angle, and in-line 15 Amps with #16 AWG Applicable cable: #16 and 18 AWG High reliability with multi-contact point Secure mating and clear tactile click Accepts resin sealing up to 5 mm height UL and TÜV certified

Interface connectors include I/O and micro USB connectors with high speed transmission and high reliability.

DH Series - 1 mm Pitch
	Contact pitch: 1 mm Small, Robust, and High Speed Transmission Number of positions: 17 - 51 Fastening type: screw or side lock Termination: solder or IDC

GT17H Series - 2 mm Pitch
	Contact pitch: 2 mm Number of positions: 4 - 26 Fastening type: center lock or side lock ideal for selected automotive applications High speed transmission: 1 Gbps Receptacle: right angle, vertical Plug(crimp): straight, right angle, quarter angle

ZX Series - USB 2.0 micro
	Receptacle: Top-mount micro-B, bottom-mount micro-B, middle-mount micro-B, top-mount micro-AB, bottom-mount micro-AB, middle-mount micro-AB Plug: type A, type B (solder or PCB mount) Cradle (PCB mount): vertical micro-B plug, right angle micro-B plug, vertical micro-B receptacle

ZX62W Series - USB 2.0 micro
	Overmolded Type for Splash Resistance Receptacle: top-mount micro-B, bottom-mount micro-B, middle-mount micro-B

ZX360 Series - USB 3.0 micro
	Receptacle: top-mount micro-B Plug: micro-B (PCB mount type)

Hirose Electric Co., Ltd. Part Search

Filter Results By: In Stock Lead-Free RoHS Compliant

Part Search Listing by Category
RoHS & Lead (Pb)-Free
RoHS Certificate of Compliance
Manufacturer's Link

Application Solutions

Service Robot and Drone Connector Solutions

Service Robots

Cleaning Robotics

Drones

Assistive Robotics

FX30B Series - 3.81 mm Pitch

HIF3 Series - 2.54 mm Pitch

FX2 Series - 1.27 mm Pitch

FX18 Series - 0.8 mm Pitch

FX20 Series - 0.5 mm Pitch

FX23 Series - 0.5 mm Pitch

DF12 Series - 0.5 mm Pitch

DF37 Series - 0.4 mm Pitch

DF40 Series - 0.4 mm Pitch

BM20 Series - 0.4 mm Pitch

U.FL Series

W.FL Series

W.FL2 Series

X.FL Series

FH28 Series - 0.5 mm Pitch

FH52 Series - 0.5 mm Pitch

FH33 Series - 0.5 mm Pitch

FH34SRJ Series - 0.5 mm Pitch

FH19 Series - 0.5 mm Pitch

FH26 Series - 0.3 mm Pitch

FH35C Series - 0.3 mm Pitch

DF60 Series - 10.16 mm Pitch

DF22 Series - 7.92 mm Pitch

DF63 Series - 3.96 mm Pitch

DF33C Series - 3.3 mm Pitch

DF1B Series - 2.5 mm Pitch

DF11 Series - 2.0 mm Pitch

DF65 Series - 1.7 mm Pitch

DF57H Series - 1.2 mm Pitch

DF50 Series - 1 mm Pitch

DF80 Series - 0.5 mm Pitch

DF36 Series - 0.4 mm Pitch

DF81 Series - 0.4 mm Pitch

HR10A Series

HR25A Series

HR30 Series

DF60 Series - 10.16 mm Pitch

DF62 Series

DF62W Series

DF63 Series - 3.96 mm Pitch

DH Series - 1 mm Pitch

GT17H Series - 2 mm Pitch

ZX Series - USB 2.0 micro

ZX62W Series - USB 2.0 micro

ZX360 Series - USB 3.0 micro

Hirose Electric Co., Ltd. Part Search

Application Solutions

INFORMATION

HELP

CONTACT US

FOLLOW US