Datacom

  Base Transceiver
Station
Data Center
Connector Lineup
 

Base Transceiver Station

Hirose’s interconnects offer an array of solutions for your Data Center and Base Transceiver Station requirements. Connectors for Base Transceiver Stations include circular waterproof and circular data transmission, high-speed board-to-board, high-speed shielded FFC series, board-to-board, wire-to-board signal transmission, board-to-board floating, and coaxial connectors. Also included are wire-to-board and interface connectors for power supplies.

For your Data Center needs, Hirose provides high-speed BGA and SMT mezzanine, high-speed SMT board-to-board, and board-to-board power connectors, as well as in-line and board-to-board connectors for routers.

With so many connector types available, you’ll find right product to design for your application. Check out Hirose’s newest products, available for immediate shipment from Digi-Key.

HR41 Series, Circular I/O

HR41 Series
  • Weather-resistant and waterproof connectors
  • Operator-friendly bayonet-locking system
  • Higher lightning surge protection (15 kV)
  • 2,000 hours of sunshine weather test
  • Sequential contact structure for hot swap
  HR41 Series Product Page HR41 Learn More

JR-W Series, Waterproof Heavy Duty

JR-W Series
  • IP67 waterproof protection tested to 1.8mm depth for 48 hours in the mated condition
  • Anti-corrosion resistance with reliable black chrome plating
  • Five polarizing keys for ease of blind mating
  • Wide varieties of pin numbers available
  JR-W Series Product Page

RM-W Series, Waterproof Multi-pin

RM-W Series
  • IP67 waterproof protection tested to 1.8mm depth for 48 hours in the mated condition
  • Pin counts available: 2, 3, 4, 8, 10, 12, 15, 20, 31, 40, 55
  • Right angle plugs permit exiting of the cable over a 360° range in any direction
  RM-W Series Product Page

HR34B Series, Miniature Waterproof

HR34B Series
  • IP67 rated for water and dust protection when fully mated
  • Push-on bayonet lock
  • 3 guide-key makes blind mating possible
  • Right angle plugs allow the cable to exit in 8 directions in 45° increments
  • RoHS compliant
  HR34B Series Product Page HR34B Series Learn More

LF Series, Waterproof Circular I/O IP68

LF Series
  • Number of contacts: 3, 4, 6, 11, 12, 20
  • IP68-compliant waterproof structure with shielding
  • Bayonet lock
  • Rear mount type and pin through-hole receptacles
  • Applicable cable: Size differs by the connector type
  LF Series Product Page LF Series Learn More

FX18 Series, Board-to-Board

FX18 Series Hirose FunctionMax Logo
  • 0.8mm pitch
  • Variations: Coplanar/Vertical/Stacking
  • Power supply contacts rated up to 12 A
  • Effective mating length of signal contact: 2.0mm
  • Ground contact to enhance grounding
  • Large mating guide for easy mating
  • Number of contacts: 40, 60, 80, 100, 120, 140
FX18 Series Product Page FX18 Series Learn More

FX10 Series, Board-to-Board

FX10 Series Hirose FunctionMax Logo
  • 0.5mm pitch
  • Stacking height: 4 – 8mm
  • Current rating: 0.3 A
  • Improved transmission efficiency between boards
  • Effective mating length is 1.1mm for signal contacts
  • Contacts with ground plate 80, 100, 120, 140
  • Contacts without ground plate 96, 120, 144, 168
FX10 Series Product Page FX10 Series Learn More

FX8/FX8C Series, Board-to-Board

FX8/FX8C Series Hirose FunctionMax Logo
  • 0.6mm pitch
  • Stacking height 3mm-16mm available
  • Current rating: 0.4 A
  • Formed contact design provides sufficient deflection for contact reliability
  • Number of contacts: 60, 80, 90, 120, 140
FX8/FX8C Series Product Page FX8/FX8C Series Learn More

FH41 Series, FFC

FH41 Series
  • 0.5mm pitch, high-speed transmission
  • Current rating: 0.5 A
  • Differential impedance 100 Ω ±10 % (1 Gbps+)
  • Firm and clear tactile click to confirm lock completion
  • FFC tabs allow high connection reliability
  • Compatible FFC with FH48
  • Number of positions: 28-68
  • Supports next gen. chip V-by-One® HS8 by THine
  FH41 Series Product Page FH41 Series Learn More

FH48 Series, FFC

FH48 Series
  • 0.5mm pitch, 6.18mm height
  • Current rating: 0.5 A
  • Accepts impedance matched shielded FFC with ground contacts
  • Differential impedance 100 Ω ±10 % (1 Gbps+)
  • LIF structure and FFC tabs allow high connection reliability
  • Pin count: 20-68 positions
  • Supports next gen. chip V-by-One® HS8 by THine
  FH48 Series Product Page FH48 Series Learn More

FX30B Series, Connectors for Power Supply

FX30B Series Hirose FunctionMax Logo
  • Contact pitch: 3.81mm
  • Current capacity: 13-17 A/pin
  • Connection type: Coplanar, Vertical, Parallel
  • Position misalignment absorption movable amount: ±0.3mm
  • This series has superior contact reliability by employing an independent four-point contact spring structure
  • Number of positions:2, 3, 4, 5
FX30B Series Product Page FX30B Series Learn More

DF22 Series, Wire-to-Board

DF22 Series Hirose EnerBee Logo
  • 7.92mm contact pitch
  • Varieties: 1-5 pos. right angle and straight type
  • Current capacity: Max. 30 A with 10 AWG cable
  • 4-point contact structure
  • Different keying types and colored housings (red, white, black)
DF22 Series Product Page DF22 Series Learn More

HR31 Series, Interface Connectors

HR31 Series
  • Complies with device net requirements
  • Contact pitch: 5.08mm
  • Current rating: 12 A (2.5mm²), 10 A (1.5mm²)
  • Plug height is 10.2mm
  • Built-in locking pin secures connector to the board therefore no need for screws
  HR31 Series Product Page

DF60 Series, Wire-to-Board

DF60 Series Hirose EnerBee Logo
  • 10.16mm pitch
  • 45 Amps high current capacity with AWG #8, 1 position
  • Accepts AWG #8-12 cables size with 1-6 position
  • 5-point contact with independent contact springs
  • Connection style varieties: straight, right angle and in-line
  • Keying variations available
  • UL and TÜV certified
DF60 Series Product Page DF60 Series Learn More

DF11 Series, Double-Row Wire-to-Board

DF11 Series
  • Contact pitch: 2mm
  • Number of contacts: 4-32
  • Current rating: 0.5 A-2 A depending on wire size
  • Applicable wire: AWG #22-30
  • RoHS compliant
  DF11 Series Product Page DF11 Series Learn More

DF57H Series, Low Profile Wire-to-Board Swing Lock

DF57H Series
  • 1.2mm pitch, 1.4mm height
  • Pin count: 2-6 positions
  • 0.5-2.5 AMP
  • AWG #28-34 cable applicable
  • 4.35m depth
  • Swing lock connector
  • Insert guide key structure
  • UL certified
  DF57H Series Product Page DF57H Series Learn More

DF59 Series, Wire-to-Board Swing Lock

DF59 Series
  • 2.0mm pitch
  • Pin count: 2-4 positions
  • 3 AMP rated current
  • AWG #22
  • 2.48mm mated height
  • 8.15mm depth
  DF59 Series Product Page DF59 Series Learn More

DF61 Series, Wire-to-Board Swing Lock

DF61 Series
  • 2.2mm pitch
  • Pin count: 2 position
  • 5 AMP maximum rated current
  • AWG #22- 28
  • 2.38mm height
  • 7.35mm depth
  DF61 Series Product Page DF61 Series Learn More

DF24 Series, Vertical Mating Wire-to-Board

DF24 Series
  • Contact pitch: 0.9mm
  • Pin count: 40, 50
  • Current rating: 1 A AWG #28, 0.5 A AWG #30, 0.3 A AWG #32-36
  • Low profile of 3.8mm
  • High contact reliability with two-point socket contact
  • Self-alignment and side-pull protection
  DF24 Series Product Page

GT8E Series, 2mm Pitch Wire-to-Board and Wire-to-Wire

GT8E Series
  • Reliability suitable for harsh environments
  • Audible clicking lock and inertia lock via a mechanical lock mechanism
  • Heat resistance: Usable up to 105°C
  • Positions available: Single row 2, 3, 4, 5, 6, 7, 8, 9, 10 double row 12, 16, 20, 24, 26, 30 positions
  GT8E Series Product Page GT8E Series Learn More

FX20 Series, Board-to-Board

FX20 Series Hirose FunctionMax Logo
  • 0.5mm pitch, stacking height 15-30mm
  • Floating range; X direction: ±0.6-0.8mm, Y direction: ±0.6mm
  • Current capacity: 0.5 A/pin
  • Self-aligning and self-guiding
  • Number of positions: 20, 40, 60, 80, 100, 120, 140
FX20 Series Product Page FX20 Series Learn More

MMCX Series, Miniature Snap-on Coaxial

MMCX Series
  • Snap-on coupling mechanism makes it easy to engage and disengage
  • Low profile accommodates PCMCIA type II cards
  • Designed for ultra-thin cable ø1.48
  • Excellent matched impedance
  • Mates with all industry standard MMCX connectors
  MMCX Series Product Page

U.FL Series, Micro Coaxial

U.FL Series
  • 2.0mm/2.5mm maximum mated height
  • Frequency: DC to 6 GHz
  • VSWR: 1.4 max
  • Plug: right angled
  • Receptacle: SMT
  U.FL Series Product Page U.FL Series Learn More

H.FL Series, Coaxial Connectors

H.FL Series
  • Mated height: 3.0mm
  • User friendly with a tactile lock sensation
  • Impedance: 50 Ohms
  • Applicable cable: ø1.48 (single shielded) or ø1.32 (double shielded) for frequency of DC to 3 GHz (1.3 Max)
  • RoHS compliant
  H.FL Series Product Page

Hirose Electric Co., Part Search

Filter Results By:  

Application Solutions

Hirose Datacom Bottom