



ASPI-0418FS-221M-T3 | |
|---|---|
Numéro de produit DigiKey | 535-15222-2-ND - Bande et bobine 535-15222-1-ND - Bande coupée (CT) 535-15222-6-ND - Digi-Reel® |
Fabricant | |
Numéro de produit du fabricant | ASPI-0418FS-221M-T3 |
Description | FIXED IND 220UH 250MA 3.84 OHM |
Délai d'approvisionnement standard du fabricant | 16 semaines |
Référence client | |
Description détaillée | 220 µH Blindé Noyau de bobine, bobiné Inducteur 250 mA 3,84ohms max. Non standard |
Fiche technique | Fiche technique |
Modèles EDA/CAO | ASPI-0418FS-221M-T3 Modèles |
Type | Description | Tout sélectionner |
|---|---|---|
Catégorie | ||
Fabricant | ||
Série | ||
Conditionnement | Bande et bobine Bande coupée (CT) Digi-Reel® | |
Statut du composant | Actif | |
Type | Noyau de bobine, bobiné | |
Matériau - Noyau | ||
Inductance | ||
Tolérance | ±20% | |
Courant nominal (A) | ||
Courant - Saturation (Isat) | 330mA | |
Blindage | Blindé | |
Résistance en courant continu (DCR) | 3,84ohms max. | |
Q à Fréq | - | |
Fréquence - Propre | 4,2MHz | |
Caractéristiques | - | |
Température de fonctionnement | -25°C ~ 120°C | |
Fréquence d'inductance - Test | 100 kHz | |
Fonctionnalités | - | |
Type de montage | Montage en surface | |
Boîtier | Non standard | |
Boîtier fournisseur | - | |
Taille /dimension | 0,157po L x 0,157po l (4,00mm x 4,00mm) | |
Hauteur - Installé (max.) | 0,071po (1,80mm) |
| Quantité | Prix unitaire | Prix total |
|---|---|---|
| 1 | 0,47000 $ | 0,47 $ |
| 10 | 0,38600 $ | 3,86 $ |
| 100 | 0,31720 $ | 31,72 $ |
| 1 000 | 0,26090 $ | 260,90 $ |
| Quantité | Prix unitaire | Prix total |
|---|---|---|
| 3 000 | 0,23767 $ | 713,01 $ |
| 6 000 | 0,22412 $ | 1 344,72 $ |
| 9 000 | 0,21656 $ | 1 949,04 $ |
| 15 000 | 0,20741 $ | 3 111,15 $ |
| 21 000 | 0,20160 $ | 4 233,60 $ |
| 30 000 | 0,19562 $ | 5 868,60 $ |

