XLamp XP-E-HEW Datasheet by Cree Inc.

View All Related Products | Download PDF Datasheet
PRODUCT FAMILY DATA SHEET
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and
XLamp® are registered trademarks of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR
logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS34 REV 8F
Cree® XLamp® XP-E High-Efficiency White LEDs
PRODUCT DESCRIPTION
XLamp® XP-E High-Efficiency White
(HEW) LEDs upgrade the XLamp XP-E LED
to leading performance levels for diffuse
lighting applications. The XP-E HEW is
designed to enable faster adoption of LED
light in cost-sensitive, consumer lighting
products. Compared to the standard
XLamp XP-E LED, the XP-E HEW can
reduce LED count by 50% and still deliver
the same system performance.
Cree XLamp LEDs bring high performance
and quality of light to a wide range
of lighting applications, including
color-changing, portable and personal,
outdoor, indoor-directional, transportation,
stage and studio, commercial and
emergency-vehicle lighting.
FEATURES
Light output and efficacy similar to
XLamp XP-G LED
Maximum drive current: 1000mA
Low thermal resistance: 6°C/W
Maximum junction temperature:
150°C
Wide viewing angle: 120°
Reflow solderable - JEDEC
J-STD-020C compatible
Electrically neutral thermal path
RoHS and REACh compliant
UL® recognized component
(E349212)
TABLE OF CONTENTS
Characteristics ...................................... 2
Flux Characteristics .............................. 3
Relative Spectral Power Distribution ... 5
Relative Flux vs. Junction
Temperature .......................................... 6
Electrical Characteristics ...................... 6
Relative Flux vs. Current ....................... 7
Relative Chromaticity vs. Current ......... 7
Relative Chromaticity vs. Temperature 8
Typical Spatial Distribution ................... 8
Thermal Design ..................................... 9
Performance Groups - Luminous Flux . 9
Performance Groups - Chromaticity .. 10
Performance Groups - Forward
Voltage ................................................. 12
Crees Standard Chromaticity
Regions Plotted on the 1931 CIE
Curve .................................................... 13
Crees Standard Cool White Kits
Plotted on ANSI Standard
Chromaticity Regions ......................... 14
Crees Standard Warm and Neutral
White Kits Plotted on ANSI Standard
Chromaticity Regions ......................... 15
Crees Standard Chromaticity Kits ..... 16
Bin and Order Code Formats .............. 16
Reflow Soldering Characteristics ....... 17
Notes ................................................... 18
Mechanical Dimensions ..................... 20
Tape and Reel ...................................... 21
Packaging ............................................ 22
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
2
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point - white °C/W 6
Viewing angle (FWHM) - white degrees 120
Temperature coefficient of voltage - white mV/°C -3
ESD classification (HBM per Mil-Std-883D) Class 2
DC forward current - white mA 1000
Reverse voltage V5
Forward voltage (@ 350mA) - white V3.0 3.5
Forward voltage (@ 700mA) - white V3.15
Forward voltage (@ 1000mA) - white V3.25
LED junction temperature °C 150
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
3
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
FLUX CHARACTERISTICS (TJ = 25°C)
The following tables provide order codes for XLamp XP-E HEW LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 16). For definitions of the chromaticity kits, please see the Crees Standard
Chromaticity Kits section (page 16).
Chromaticity
Minimum
Luminous Flux
(lm) @ 350mA
Order Codes
Kit CCT Code Flux (lm) 68 CRI Typical
51 6200 K
R5 139 XPEHEW-L1-0000-00H51
R4 130 XPEHEW-L1-0000-00G51
R3 122 XPEHEW-L1-0000-00F51
53 6000 K
R5 139 XPEHEW-L1-0000-00H53
R4 130 XPEHEW-L1-0000-00G53
R3 122 XPEHEW-L1-0000-00F53
50 6200 K R3 122 XPEHEW-L1-0000-00F50
Chromaticity Minimum Luminous
Flux (lm) @ 350mA Order Codes
Kit CCT Code Flux (lm) 70 CRI Typical 75 CRI Typical 80 CRI Minimum
E3 5000 K
R4 130 XPEHEW-01-0000-00GE3
R3 122 XPEHEW-01-0000-00FE3 XPEHEW-L1-0000-00FE3
R2 114 XPEHEW-01-0000-00EE3 XPEHEW-L1-0000-00EE3
Q5 107 XPEHEW-L1-0000-00DE3
F4 4750 K
R4 130 XPEHEW-01-0000-00GF4
R3 122 XPEHEW-01-0000-00FF4 XPEHEW-L1-0000-00FF4
R2 114 XPEHEW-01-0000-00EF4 XPEHEW-L1-0000-00EF4
Q5 107 XPEHEW-L1-0000-00DF4
E4 4500 K
R4 130 XPEHEW-01-0000-00GE4
R3 122 XPEHEW-01-0000-00FE4 XPEHEW-L1-0000-00FE4
R2 114 XPEHEW-01-0000-00EE4 XPEHEW-L1-0000-00EE4
Q5 107 XPEHEW-L1-0000-00DE4
F5 4250 K
R4 130 XPEHEW-01-0000-00GF5
R3 122 XPEHEW-01-0000-00FF5 XPEHEW-L1-0000-00FF5
R2 114 XPEHEW-01-0000-00EF5 XPEHEW-L1-0000-00EF5
Q5 107 XPEHEW-L1-0000-00DF5
E5 4000 K
R4 130 XPEHEW-01-0000-00GE5
R3 122 XPEHEW-01-0000-00FE5 XPEHEW-L1-0000-00FE5
R2 114 XPEHEW-01-0000-00EE5 XPEHEW-L1-0000-00EE5 XPEHEW-H1-0000-00EE5
Q5 107 XPEHEW-L1-0000-00DE5 XPEHEW-H1-0000-00DE5
3
Notes:
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 18).
Cree XLamp XP-E HEW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins
higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin
restrictions specified by the order code.
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
4
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
Chromaticity
Minimum
Luminous
Flux (lm) @
350mA
Order Codes
Kit CCT Code Flux
(lm) 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
F6 3750 K
R2 114 XPEHEW-01-0000-00EF6 XPEHEW-L1-0000-00EF6 XPEHEW-H1-0000-00EF6
Q5 107 XPEHEW-01-0000-00DF6 XPEHEW-L1-0000-00DF6 XPEHEW-H1-0000-00DF6
Q4 100 XPEHEW-L1-0000-00CF6 XPEHEW-H1-0000-00CF6
E6 3500 K
R2 114 XPEHEW-01-0000-00EE6 XPEHEW-L1-0000-00EE6
Q5 107 XPEHEW-01-0000-00DE6 XPEHEW-L1-0000-00DE6 XPEHEW-H1-0000-00DE6
Q4 100 XPEHEW-L1-0000-00CE6 XPEHEW-H1-0000-00CE6
F7 3250 K
R2 114 XPEHEW-01-0000-00EF7
Q5 107 XPEHEW-01-0000-00DF7 XPEHEW-L1-0000-00DF7 XPEHEW-H1-0000-00DF7
Q4 100 XPEHEW-01-0000-00CF7 XPEHEW-L1-0000-00CF7 XPEHEW-H1-0000-00CF7
Q3 93.9 XPEHEW-L1-0000-00BF7 XPEHEW-H1-0000-00BF7
P3 73.9
E7 3000 K
R2 114 XPEHEW-01-0000-00EE7
Q5 107 XPEHEW-01-0000-00DE7 XPEHEW-L1-0000-00DE7
Q4 100 XPEHEW-01-0000-00CE7 XPEHEW-L1-0000-00CE7 XPEHEW-H1-0000-00CE7
Q3 93.9 XPEHEW-L1-0000-00BE7 XPEHEW-H1-0000-00BE7 XPEHEW-P1-0000-00BE7
Q2 87.4 XPEHEW-P1-0000-00AE7 XPEHEW-U1-0000-00AE7
P4 80.6 XPEHEW-P1-0000-009E7 XPEHEW-U1-0000-009E7
F8 2850 K
Q5 107 XPEHEW-01-0000-00DF8
Q4 100 XPEHEW-01-0000-00CF8 XPEHEW-L1-0000-00CF8 XPEHEW-H1-0000-00CF8
Q3 93.9 XPEHEW-L1-0000-00BF8 XPEHEW-H1-0000-00BF8
Q2 87.4 XPEHEW-L1-0000-00AF8 XPEHEW-H1-0000-00AF8 XPEHEW-P1-0000-00AF8 XPEHEW-U1-0000-00AF8
P4 80.6 XPEHEW-P1-0000-009F8 XPEHEW-U1-0000-009F8
P3 73.9 XPEHEW-P1-0000-008F8 XPEHEW-U1-0000-008F8
E8 2700 K
Q5 107 XPEHEW-01-0000-00DE8
Q4 100 XPEHEW-01-0000-00CE8 XPEHEW-L1-0000-00CE8
Q3 93.9 XPEHEW-L1-0000-00BE8 XPEHEW-H1-0000-00BE8
Q2 87.4 XPEHEW-L1-0000-00AE8 XPEHEW-H1-0000-00AE8 XPEHEW-P1-0000-00AE8
P4 80.6 XPEHEW-P1-0000-009E8 XPEHEW-U1-0000-009E8
P3 73.9 XPEHEW-P1-0000-008E8 XPEHEW-U1-0000-008E8
FLUX CHARACTERISTICS (TJ=25°C) - CONTINUED
Notes:
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 18).
Cree XLamp XP-E HEW LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins
higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin
restrictions specified by the order code.
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
5
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
RELATIVE SPECTRAL POWER DISTRIBUTION
Relative Spectral Power
roboto-the only graph here that is
0
20
40
60
80
100
380 430 480 530 580 630 680 730 780
Relative Radiant Power (%)
Wavelength (nm)
Cool White
Neutral White
Warm & 80 CRI White
0
20
40
60
80
100
380 430 480 530 580 630 680 730 780
Relative Radiant Power (%)
Wavelength (nm)
Outdoor White
85 & 90 CRI White
5
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
6
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 350mA)
ELECTRICAL CHARACTERISTICS (TJ = 25°C)
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Electrical Characteristics (Tj = 25ºC)
0
100
200
300
400
500
600
700
800
900
1000
2.00 2.25 2.50 2.75 3.00 3.25
3.50
Forward Current (mA)
Forward Voltage (V)
6
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
7
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
RELATIVE FLUX VS. CURRENT (TJ = 25°C)
RELATIVE CHROMATICITY VS. CURRENT - WARM WHITE
Relative Intensity vs. Current (Tj = 25ºC)
0%
50%
100%
150%
200%
250%
0100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux
Forward Current (mA)
Warm White
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
100200 300400 500600700800900 1000
Current (mA)
CCx
CCy
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
25 50 75 100 125 150
Tsp (°C)
CCx
CCy
7
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
8
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
RELATIVE CHROMATICITY VS. TEMPERATURE -WARM WHITE
TYPICAL SPATIAL DISTRIBUTION
Warm White
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
100200 300400 500600700800900 1000
Current (mA)
CCx
CCy
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
25 50 75 100 125 150
Tsp (°C)
CCx
CCy
Typical Spatial Radiation Pattern
0
20
40
60
80
100
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity (%)
Angle (º)
8
Ambient Temperaiure (°C)
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
9
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optomize lamp life
and optical characteristics.
PERFORMANCE GROUPS - LUMINOUS FLUX
XLamp XP-E HEW LEDs are tested for luminous flux and placed into one of the following luminous-flux groups:
Group Code Minimum Luminous Flux
(lm) @ 350mA
Maximum Luminous Flux
(lm) @ 350mA
P3 73.9 80.6
P4 80.6 87.4
Q2 87.4 93.9
Q3 93.9 100
Q4 100 107
Q5 107 114
R2 114 122
R3 122 130
R4 130 139
R5 139 148
S2 148 156
S3 156 164
S4 164 172
Thermal Design
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
10
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
PERFORMANCE GROUPS - CHROMATICITY
White XLamp LEDs are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the following
pages.
Region xy Region xy Region xy Region xy
0A
0.2950 0.2970
0B
0.2920 0.3060
0C
0.2984 0.3133
0D
0.2984 0.3133
0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.3048 0.3207
0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3068 0.3113
0.3009 0.3042 0.2984 0.3133 0.3048 0.3207 0.3009 0.3042
0R
0.2980 0.2880
0S
0.2895 0.3135
0T
0.2962 0.3220
0U
0.3037 0.2937
0.2950 0.2970 0.2870 0.3210 0.2937 0.3312 0.3009 0.3042
0.3009 0.3042 0.2937 0.3312 0.3005 0.3415 0.3068 0.3113
0.3037 0.2937 0.2962 0.3220 0.3028 0.3304 0.3093 0.2993
1A
0.3048 0.3207
1B
0.3028 0.3304
1C
0.3115 0.3391
1D
0.3130 0.3290
0.3130 0.3290 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373
0.3144 0.3186 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261
0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186
1R
0.3068 0.3113
1S
0.3005 0.3415
1T
0.3099 0.3509
1U
0.3144 0.3186
0.3144 0.3186 0.3099 0.3509 0.3196 0.3602 0.3221 0.3261
0.3161 0.3059 0.3115 0.3391 0.3205 0.3481 0.3231 0.3120
0.3093 0.2993 0.3028 0.3304 0.3115 0.3391 0.3161 0.3059
2A
0.3215 0.3350
2B
0.3207 0.3462
2C
0.3290 0.3538
2D
0.3290 0.3417
0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490
0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369
0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300
2R
0.3222 0.3243
2S
0.3196 0.3602
2T
0.3290 0.3690
2U
0.3290 0.3300
0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369
0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245
0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180
3A
0.3371 0.3490
3B
0.3376 0.3616
3C
0.3463 0.3687
3D
0.3451 0.3554
0.3451 0.3554 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620
0.3440 0.3427 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487
0.3366 0.3369 0.3371 0.3490 0.3451 0.3554 0.3440 0.3427
3R
0.3366 0.3369
3S
0.3381 0.3762
0.3440 0.3428 0.3480 0.3840
0.3429 0.3307 0.3463 0.3687
0.3361 0.3245 0.3376 0.3616
4A
0.3530 0.3597
4B
0.3548 0.3736
4C
0.3641 0.3804
4D
0.3615 0.3659
0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722
0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578
0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
11
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
Region xy Region xy Region xy Region xy
5A1
0.3670 0.3578
5A2
0.3686 0.3649
5A3
0.3744 0.3685
5A4
0.3726 0.3612
0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3744 0.3685
0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3804 0.3721
0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646
5B1
0.3702 0.3722
5B2
0.3719 0.3797
5B3
0.3782 0.3837
5B4
0.3763 0.3760
0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837
0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877
0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798
5C1
0.3825 0.3798
5C2
0.3847 0.3877
5C3
0.3912 0.3917
5C4
0.3887 0.3836
0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917
0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958
0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875
5D1
0.3783 0.3646
5D2
0.3804 0.3721
5D3
0.3863 0.3758
5D4
0.3840 0.3681
0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758
0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794
0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716
6A1
0.3889 0.3690
6A2
0.3915 0.3768
6A3
0.3981 0.3800
6A4
0.3953 0.3720
0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800
0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832
0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751
6B1
0.3941 0.3848
6B2
0.3968 0.3930
6B3
0.4040 0.3966
6B4
0.4010 0.3882
0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966
0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001
0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916
6C1
0.4080 0.3916
6C2
0.4113 0.4001
6C3
0.4186 0.4037
6C4
0.4150 0.3950
0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037
0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073
0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984
6D1
0.4017 0.3751
6D2
0.4048 0.3832
6D3
0.4116 0.3865
6D4
0.4082 0.3782
0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865
0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898
0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814
7A1
0.4147 0.3814
7A2
0.4183 0.3898
7A3
0.4242 0.3919
7A4
0.4203 0.3833
0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919
0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939
0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853
7B1
0.4221 0.3984
7B2
0.4259 0.4073
7B3
0.4322 0.4096
7B4
0.4281 0.4006
0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096
0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119
0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028
PERFORMANCE GROUPS - CHROMATICITY (CONTINUED)
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
12
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
Region xy Region xy Region xy Region xy
7C1
0.4342 0.4028
7C2
0.4385 0.4119
7C3
0.4449 0.4141
7C4
0.4403 0.4049
0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141
0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164
0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071
7D1
0.4259 0.3853
7D2
0.4300 0.3939
7D3
0.4359 0.3960
7D4
0.4316 0.3873
0.4300 0.3939 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960
0.4359 0.3960 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981
0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893
8A1
0.4373 0.3893
8A2
0.4418 0.3981
8A3
0.4475 0.3994
8A4
0.4428 0.3906
0.4418 0.3981 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994
0.4475 0.3994 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008
0.4428 0.3906 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919
8B1
0.4465 0.4071
8B2
0.4513 0.4164
8B3
0.4573 0.4178
8B4
0.4523 0.4085
0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178
0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193
0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099
8C1
0.4582 0.4099
8C2
0.4634 0.4193
8C3
0.4695 0.4207
8C4
0.4641 0.4112
0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207
0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221
0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126
8D1
0.4483 0.3919
8D2
0.4532 0.4008
8D3
0.4589 0.4021
8D4
0.4538 0.3931
0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021
0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034
0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944
PERFORMANCE GROUPS - FORWARD VOLTAGE
XLamp XP-E HEW LEDs are tested for forward voltage and sorted into one of the forward voltage bins defined below.
Forward Voltage
Group
Minimum Forward Voltage
(V) @ 350mA
Maximum Forward Voltage
(V) @ 350mA
B1.75 2.0
C2.0 2.25
D2.25 2.5
E2.5 2.75
F2.75 3.0
G3.0 3.25
H3.25 3.5
J 3.5 3.75
PERFORMANCE GROUPS - CHROMATICITY (CONTINUED)
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
13
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE
ANSI Cool White
ANSI Neutral White and ANSI Warm White
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D46A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4
7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D48A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D28D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
14
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
CREE’S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
51
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
53
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
50
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
15
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
E3
E4
E5
E6
E8
E7
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
F4
F6
F7
F5
F8
fig BD-MLW- SSS _l: >NNNNN ED 5350
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
16
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
CREE’S STANDARD CHROMATICITY KITS
The following table provides the chromaticity bins associated with chromaticity kits.
Color CCT Kit Chromaticity Bins
Cool
White
6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
Neutral
White
5000 K E3 3A, 3B, 3C, 3D
4750 K F4 3C, 3D, 4A, 4B
4500 K E4 4A, 4B, 4C, 4D
4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
Warm
White
3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
BIN AND ORDER CODE FORMATS
XP-E HEW bin codes and order codes are configured in the following manner:
Order Code Bin Code
SSSCCC-BD-HHHH-NNNNN
Internal code
Color
HEW = High-Efficiency White
Series
XPE = XP-E
Color specification
01 = Outdoor White
L1 = Standard CRI
H1 = 80 CRI minimum
P1 = 85 CRI minimum
U1 = 90 CRI minimum
Kit Number
SSSCCC-BD-WWW-FF-G-AA
Series
XPE = XP-E
Color specification
01 = Outdoor White
L1 = Standard CRI
H1 = 80 CRI minimum
P1 = 85 CRI minimum
U1 = 90 CRI minimum
Luminous or radiant flux group
Internal code
Voltage performance group
Chromaticity bin or
dominant-wavelength group
Color
HEW = High-Efficiency White
order code & bin code headings
& formats are in a table
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
17
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
17
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XP-E HEW LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a
general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder
paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp)1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax)170 °C
Preheat: Time (tsmin to tsmax)65-150 seconds
Time Maintained Above: Temperature (TL)217 °C
Time Maintained Above: Time (tL)45-90 seconds
Peak/Classification Temperature (Tp) 235 - 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds
Ramp-Down Rate 1 - 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
IPC/JEDEC J-STD-020C
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
18
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
18
NOTES
Measurements
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
Pre-Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Crees pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Cree currently recommends a maximum drive current of 700mA for XLamp XP-E High-Efficiency White LEDs in designs seeking the
ENERGY STAR® 35,000-hour lifetime rating* (≥ 94.1% luminous flux @ 6000hours) or 1000-mA driver current in designs seeking the
ENERGY STAR* 25,000-hour lifetime rating (≥91.8% luminous flux @ 6000hours).
Please read the Long-Term Lumen Maintenance application note for more details on Crees lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
* These lifetime ratings are based on the current ENERGY STAR Product Specification for Luminaires (Light Fixtures) V1.0 (February 16,
2011) and ENERGY STAR Program Requirements for Integral LED Lamps V1.4 (May 13, 2011) lumen maintenance criteria.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XP-E HEW LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life
in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
19
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
NOTES - CONTINUED
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
20
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
20
MECHANICAL DIMENSIONS (TA = 25°C)
Thermal vias, if present, are not shown on these drawings.
All measurements are ±.13 mm unless otherwise indicated.
Side View
Top View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.50
2.30
3.30
3.45
3.45
2.5
2.08
.83
.65
3.30
1.30
.50
3.30
2.30
.50 .64
1.01
3.30
.75
.25
3.30
3.30
.50
1.30
.50
3.30
REF.
3.30
REF.
1/124.000
D
2610-00014
OUTLINE DRAWING XP HEW
--
--
----
----
11/29/10D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY ALTERNATIVE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.50
2.30
3.30
3.45
3.45
2.5
2.08
.83
.65
3.30
1.30
.50
3.30
2.30
.50 .64
1.01
3.30
.75
.25
3.30
3.30
.50
1.30
.50
3.30
REF.
3.30
REF.
1/124.000
D
2610-00014
OUTLINE DRAWING XP HEW
--
--
----
----
11/29/10D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY ALTERNATIVE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.50
2.30
3.30
3.45
3.45
2.5
2.08
.83
.65
3.30
1.30
.50
3.30
2.30
.50 .64
1.01
3.30
.75
.25
3.30
3.30
.50
1.30
.50
3.30
REF.
3.30
REF.
1/124.000
D
2610-00014
OUTLINE DRAWING XP HEW
--
--
----
----
11/29/10D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY ALTERNATIVE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.50
2.30
3.30
3.45
3.45
2.5
2.08
.83
.65
3.30
1.30
.50
3.30
2.30
.50 .64
1.01
3.30
.75
.25
3.30
3.30
.50
1.30
.50
3.30
REF.
3.30
REF.
1/124.000
D
2610-00014
OUTLINE DRAWING XP HEW
--
--
----
----
11/29/10D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY ALTERNATIVE
Alternate Bottom View
Bottom View
Recommended PCB Solder Pad Recommended Stencil Pattern
(Hatched Area is Open)
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.50
2.30
3.30
3.45
3.45
2.5
2.08
.83
.65
3.30
1.30
.50
3.30
2.30
.50 .64
1.01
3.30
.75
.25
3.30
3.30
.50
1.30
.50
3.30
REF.
3.30
REF.
1/124.000
D
2610-00014
OUTLINE DRAWING XP HEW
--
--
----
----
11/29/10D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY ALTERNATIVE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.50
2.30
3.30
3.45
3.45
2.5
2.08
.83
.65
3.30
1.30
.50
3.30
2.30
.50 .64
1.01
3.30
.75
.25
3.30
3.30
.50
1.30
.50
3.30
REF.
3.30
REF.
1/124.000
D
2610-00014
OUTLINE DRAWING XP HEW
--
--
----
----
11/29/10D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY ALTERNATIVE
mgau gm 175 « / / , User Feed Direction START / / Emmmvm ooooooo‘, pooooooooo‘l pooooooooooooooooq moose EEEEEE El k Trailer 4 / , Loaded Packets (1 ,000 Lamps) p Leader 400mm (min) of mply pockels wilh al leasl 100mm sealed by Iape mpty pockets min.) 4» +
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
21
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
21
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
Except as noted, all dimensions in mm.
Loaded Pockets
(1,000 Lamps)
Leader
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
START
END
Cathode Side
Anode Side
(denoted by + and circle)
160.0
A
A
B
2.5
±.1
SECTION A-A
SCALE 2 : 1
1.5
±.1
8.0
±.1
4.0
±.1
1.75
±.10
12.0 .0
+
.3
DETAIL B
SCALE 2 : 1
13
mm
7"
Cover Tape
Pocket Tape
User Feed Direction
User Feed Direction
Y
Y
XX
REF 0.59
W
F(III)
P1
D1
1.5 MIN.
Bo
Ao
R0.2
TYPICAL
REF 4.375
Ko
Other material available.(IV)
(III)
(II)
(I)
hole to centerline of pocket.
Measured from centerline of sprocket
holes is ± 0.20.
Cumulative tolerance of 10 sprocket
to centerline of pocket.
Measured from centerline of sprocket hole
SECTION Y-Y
SECTION X-X
2.0 ±0.05 (I)
P2
1.55 ±0.05
Do
4.0 ±0.1 (II)
Po
1.75 ±0.1
E1
0.30 ±0.05
T
REF R 2.24
2.40Ko +0.0/-0.1
3.70
1
W
F
P
+/- 0.05
+/- 0.1
+0.3/-0.1
5.50
8.00
12.00
Ao 3.70 +/- 0.1
Bo +/- 0.1
Y
Y
XX
REF 0.59
W
F(III)
P1
D1
1.5 MIN.
Bo
Ao
R0.2
TYPICAL
REF 4.375
Ko
Other material available.(IV)
(III)
(II)
(I)
hole to centerline of pocket.
Measured from centerline of sprocket
holes is ± 0.20.
Cumulative tolerance of 10 sprocket
to centerline of pocket.
Measured from centerline of sprocket hole
SECTION Y-Y
SECTION X-X
2.0 ±0.05 (I)
P2
1.55 ±0.05
Do
4.0 ±0.1 (II)
Po
1.75 ±0.1
E1
0.30 ±0.05
T
REF R 2.24
2.40Ko +0.0/-0.1
3.70
1
W
F
P
+/- 0.05
+/- 0.1
+0.3/-0.1
5.50
8.00
12.00
Ao 3.70 +/- 0.1
Bo +/- 0.1
Y
Y
XX
REF 0.59
W
F(III)
P1
D1
1.5 MIN.
Bo
Ao
R0.2
TYPICAL
REF 4.375
Ko
Other material available.(IV)
(III)
(II)
(I)
hole to centerline of pocket.
Measured from centerline of sprocket
holes is ± 0.20.
Cumulative tolerance of 10 sprocket
to centerline of pocket.
Measured from centerline of sprocket hole
SECTION Y-Y
SECTION X-X
2.0 ±0.05 (I)
P2
1.55 ±0.05
Do
4.0 ±0.1 (II)
Po
1.75 ±0.1
E1
0.30 ±0.05
T
REF R 2.24
2.40Ko +0.0/-0.1
3.70
1
W
F
P
+/- 0.05
+/- 0.1
+0.3/-0.1
5.50
8.00
12.00
Ao 3.70 +/- 0.1
Bo +/- 0.1
CATHODE SIDE
ANODE SIDE
Copyright © 2010-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. ENERGY
STAR® is a registered trademark of the U.S. Environmental Protection Agency. UL® and the UR logo are registered trademarks of UL LLC.
22
XLAMP® XP-E HIGH-EFFICIENCY WHITE LED
PACKAGING
22
Patent Label
(on bottom of box)
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
CREE Bin Code
& Barcode Label
Vacuum-Sealed
Moisture Barrier Bag
Label with Customer
P/N, Qty, Lot #, PO #
Label with Cree Bin
Code, Qty, Lot #
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #

Products related to this Datasheet

LED XLAMP WARM WHITE 3000K 2SMD
LED XLAMP WARM WHITE 2700K 2SMD
LED XLAMP WARM WHITE 3000K 2SMD
LED XLAMP WARM WHITE 2700K 2SMD
LED XLAMP WARM WHITE 3000K 2SMD
LED XLAMP WARM WHITE 2700K 2SMD
LED XLAMP WARM WHITE 2700K 2SMD
LED XLAMP WARM WHITE 2700K 2SMD
LED XLAMP WARM WHITE 3000K 2SMD
LED XLAMP WARM WHITE 3000K 2SMD
LED XLAMP WARM WHITE 2700K 2SMD
LED XLAMP WARM WHITE 3000K 2SMD
LED XLAMP WARM WHITE 3000K 2SMD
LED XLAMP WARM WHITE 2700K 2SMD
LED XLAMP WARM WHITE 3250K 2SMD
LED XLAMP WARM WHITE 2850K 2SMD
LED XLAMP WARM WHITE 3500K 2SMD
LED XLAMP WARM WHITE 3000K 2SMD
LED XLAMP WARM WHITE 2700K 2SMD
LED XLAMP WARM WHITE 3750K 2SMD
LED XLAMP WARM WHITE 3250K 2SMD
LED XLAMP WARM WHITE 2850K 2SMD
LED XLAMP COOL WHITE 5000K 2SMD
LED XLAMP NEUTRAL WHT 4500K 2SMD
LED XLAMP NEUTRAL WHT 4300K 2SMD
LED XLAMP NEUTRAL WHT 4750K 2SMD
LED XLAMP NEUTRAL WHT 4500K 2SMD
LED XLAMP COOL WHITE 5000K 2SMD
LED XLAMP NEUTRAL WHT 4500K 2SMD
LED XLAMP NEUTRAL WHT 4000K 2SMD