Voltage Regulators - Linear, Low Drop Out (LDO) Regulators | Power Management (PMIC) | Electronic Components Distributor DigiKey

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package
AZ1117IH-3.3TRG1 IC REG LINEAR 3.3V 1A SOT-223-3 Diodes Incorporated	177,337 In Stock	1 : $0.91000 Cut Tape (CT) 4,000 : $0.17700 Tape & Reel (TR)	AZ1117I	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.3V @ 800mA	1A	6 mA	-	70dB (120Hz)	-	Thermal Shutdown	-40°C ~ 125°C (TJ)	Surface Mount	TO-261-4, TO-261AA	SOT-223-3
LM1117IMPX-3.3/NOPB IC REG LIN 3.3V 800MA SOT-223-4 Texas Instruments	12,188 In Stock	1 : $1.58000 Cut Tape (CT) 2,000 : $0.76320 Tape & Reel (TR)	LM1117-3.3	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.2V @ 800mA	800mA	5 mA	10 mA	75dB (120Hz)	-	Over Current, Over Temperature	-40°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223-4
NCP1117ST33T3G IC REG LINEAR 3.3V 1A SOT-223 onsemi	27,000 In Stock	1 : $1.83000 Cut Tape (CT) 4,000 : $0.40889 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	20V	3.3V	-	1.2V @ 800mA	1A	10 mA	-	64dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-261-4, TO-261AA	SOT-223
LD1117ADT33TR IC REG LINEAR 3.3V 1A DPAK STMicroelectronics	18,960 In Stock	1 : $0.89000 Cut Tape (CT) 2,500 : $0.40337 Tape & Reel (TR)	-	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Positive	Fixed	1	15V	3.3V	-	1.3V @ 1A	1A	10 mA	-	75dB (120Hz)	-	Over Current, Over Temperature	0°C ~ 125°C	Surface Mount	TO-252-3, DPAK (2 Leads + Tab), SC-63	DPAK

Showing

of 4

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.