Full Half-Bridge (H Bridge) Drivers

Results: 3

Filters

Stacked

Scrolling

Showing

of 3

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Applications	Interface	Load Type	Technology	Rds On (Typ)	Current - Output / Channel	Current - Peak Output	Voltage - Supply	Voltage - Load	Operating Temperature	Features	Fault Protection	Mounting Type	Package / Case	Supplier Device Package

CSD95372BQ5M IC HALF BRIDGE DRIVER 60A 12LSON Texas Instruments	4,556 In Stock	1 : $7.60000 Cut Tape (CT) 2,500 : $3.83636 Tape & Reel (TR)	NexFET™	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Half Bridge	Synchronous Buck Converters	PWM	Inductive	Power MOSFET	-	60A	90A	4.5V ~ 5.5V	4.5V ~ 16V	-55°C ~ 150°C (TJ)	Bootstrap Circuit, Status Flag	Current Limiting, Over Temperature, Shoot-Through, Short Circuit, UVLO	Surface Mount	12-PowerLFDFN	12-LSON-CLIP (5x6)
CSD95372AQ5M IC HALF BRIDGE DRIVER 60A 12LSON Texas Instruments	12,335 In Stock	1 : $4.30000 Cut Tape (CT) 2,500 : $2.70002 Tape & Reel (TR)	NexFET™	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Half Bridge	Synchronous Buck Converters	PWM	Inductive	Power MOSFET	-	60A	90A	4.5V ~ 5.5V	4.5V ~ 16V	-55°C ~ 150°C (TJ)	Bootstrap Circuit, Status Flag	Over Temperature, Shoot-Through, UVLO	Surface Mount	12-PowerLFDFN	12-LSON-CLIP (5x6)
CSD95495QVM IC HALF BRIDGE DRIVER 50A 18VSON Texas Instruments	1,413 In Stock	1 : $6.80000 Cut Tape (CT) 2,500 : $3.00930 Tape & Reel (TR)	NexFET™	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Half Bridge (3)	Synchronous Buck Converters	PWM	Inductive, Capacitive	Power MOSFET	-	50A	75A	4.5V ~ 5.5V	4.5V ~ 16V	-40°C ~ 125°C (TJ)	Bootstrap Circuit	Shoot-Through	Surface Mount	18-PowerTFDFN	18-VSON (5x4)

Showing

of 3

Full Half-Bridge (H Bridge) Drivers

Devices in the bridge driver PMIC (Power Management Integrated Circuit) family incorporate two or more power transistors along with circuitry required to operate them as switches under the control of an external device. The transistors are typically configured internally in series-connected pairs known as half-bridges, such that the junction between any given pair can be connected to either of two power supply rails. They are commonly used to translate low-level signals provided by a control device such as a microcontroller into the higher power signals required to operate an actuator such as a stepper or brushless motor.