Quick Dive Information on the Latest Product Additions and New Components.
The TDK SmartMotion platform is a comprehensive development kit for InvenSense motion sensor devices. The platform is designed around a Microchip SAMG55 MCU.
The ICP-101xx pressure sensor measures pressure differences with an accuracy of ±1 Pa, an accuracy enabling altitude measurement differentials as small as 5 cm.
InvenSense's DK-20948 is a comprehensive development platform for the ICM-20948.
InvenSense's DK-20602 is a comprehensive development platform for ICM-20602, a high performance 6-axis motion sensor that combines a 3-axis gyroscope and a 3-axis accelerometer.
InvenSense's 7-axis ICM-20789 is a high performance integrated 6-axis inertial and barometric pressure sensor in a 4 x 4 x 1.365 mm LGA package.
The development kit comes with necessary software including InvenSense MotionLink, a GUI based development tool and embedded Motion Drivers for ICM-20789
InvenSense's DK-20648 comprehensive development kit combines a 3-axis gyroscope, a 3-axis accelerometer, and a Digital Motion Processor™ (DMP) designed for rapid evaluation and development of ICM-20648-based solutions.
InvenSense's ICS-40730 is an ultra-low noise, bottom port microphone with differential analog output.
Invensense's ICS-52000 is a bottom port microphone with a TDM digital output. This demo board contains 16 ICS-52000 microphones in a 4 x 4 array with 15 mm spacing.
InvenSense's ICS-40720 high performance, low noise microphone targeted for microphone arrays and voice control applications.
InvenSense ICM-20948 is the latest 9-axis which pushes the boundaries of performance providing a low gyroscope rate noise at ±11mdps/√Hz while offering low power and tight sensitivity error.
InvenSense's ICS-52000 bottom-port microphone with digital TDM interface allows up to 16 of the ICS-52000 microphones to connect directly to digital processors.
InvenSense's ICS-40618 is a bottom port microphone with a differential analog output. This microphone can capture a very wide dynamic range with very low power consumption.
InvenSense's ICM-20648 is a 6-axis motion tracking device that is ideal for applications looking to utilize on board DMP to run up to 9-axis sensor fusion algorithms on chip to help offload microcontrollers.
InvenSense's ICS-43434 is a digital I²S output bottom port microphone. The complete ICS-43434 solution consists of a MEMS sensor signal conditioning an analog-to-digital converter decimation and antialiasing filters power management and an industry standard 24-bit I²S interface.
InvenSense's ICM-20602 is a 6-axis motion-tracking device that combines a 3-axis gyroscope and 3-axis accelerometer in a small 3 mm x 3 mm x 0.75 mm (16-pin LGA) package.
InvenSense's ICM-20608 combines a 3-axis gyroscope, and a 3-axis accelerometer in a small 3x3x0.75 mm (16-pin LGA) package.
Today’s wearable sports applications require higher than the common ±2000 dps FSR so that critical data is not lost at the point of impact.
InvenSense's INMP621 features a wide dynamic range microphone with PDM digital output with high sound pressure level, ultra-low-noise, and low power
InvenSense's ICS-40300 is a low-noise, high-SPL MEMS microphone with extended low-frequency response.
Keep an eye on your inbox for news and updates from Digi-Key!
Please enter an email address