FTSH-1yy-yy-yy-D-yy-yy Drawing Datasheet by Samtec Inc.

View All Related Products | Download PDF Datasheet
No OF FOS x 0500 [T .270] 02 O O] @EEEE O OO fifififififi No OF FOS x .0500 [T 17017 3%? , ,003 [.08] ‘3”; flooflfl Tu T3] Tn 221 0500 [I .270] fiofiofifio’h ED 4 ,LL IXXEXX XX D XXFXX No OF POSITIONS LEAD STVLE W 3U“ SELECTIVE GOLD TN CONTACT AREA, MATTE TTN ON TATL TDD“ SELECTIVE GO MATTE TTN ON TATL 73: 30D‘3ELECTTVE GOLD TN CONTACT AREA, MATTE TTN ON TATL 7H 30v" HEAW GOLD TN CONTACT AREA, 3U“ GOLD ON TATL FM 3U“3ELECTTVE GOLD TN CONTACT AREA, MATTE TIN ON TATL VLM IOU“ SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TATL 73M: 30D“ SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TATL rLTL H31“ SELECTIVE GOLD TN CONTACT AREA, He + 5% TTN LEAD ON TAIL ,050 [I .26] FTSerxrchxxifi OPTIONS VES' ENDS—FIRED: (702 3. 703 LEAD S 9 P03 FER Row MUST USE FTSHV rEL SHROUD LOCK (702 3. 703 LEAD 9 P03 FER Ro USE ONLV W (MUST USE FT HEP GUIDE POST 702 3. 703 LEAD STYLE 9 P03 FER Row MIN (USE ONLY WHEN M EMUSI USE FISHVSO JECTOR SHROUD [SEE FIG 3, SHT 2] SEE NOTE 5} (MUST USE ETSH 50 D) 7R KEYTNGSHROUD roI LEAD STYLE ONLYV SEE F POS 05,08, T0, T3. T5, In USE ONLY WITH ERA TAIL o MUST USE FTSHVXXVCNVXX) TAIL OPTION ERA' RIGHT ANGLE VFC' FLEX CARD [MUST USE FTSHVSOVD [EDT LEAD STYLE ONLV, EOR USE WIT VFE' FLEX CARD ELEVATED [{AUST US [EDT LEAD STYLE ONLv, F0 USE W ROW SPECIFICATION VD: DOUBLE ROW ,zuo[5.os] REF a F M J 6: 4.1 7K OPTION SHOWN @123 49 .T35[3 43] I REF \ I A- L, 2' MAX SWAY (EITHER DIRECTIONI 0T6[0,AT]SQ r-C¥ . <7 2="" max="" sway="" ref="" twp]="" ‘="" (either="" direction)="" 2'="" max="" 5w”="" 7="" n="" n="" n="" n="" n="" n="" a="" a="" a="" a="" w="" m="" ‘="" [either="" direction]="" ©="" h="" contact="" 9033a="" (555="" table="" 3}="" ‘="" a"="" i="" area="" i="" fin="" #2="" i="" lnoieb="" (seetable="" 3!="" i="" f="" ”bi,="" [="" (see="" table="" 2="" t«="" u="" u="" u="" u="" u="" iiilji="" tlcji="" tlcji="" tlcji="" li="" &="" see="" noie="" 2’="" ftsh’sovd="" 099="" [2.51]="" ©="" ref="" c="" c="" _="" _="" c="" n="" n="" n="" n="" n="" m="" m="" m="" m="" m="" t="" f="" 7="" 7="" 7="" 7="" 7="" l="" j="" .oso[i.27]©="" 7="" 7="" 7="" 7="" 7="" 7="" 7="" 7="" 7="" 7="" ©050[t="" .27]="" t="" :="" :="" :="" :="" :="" :="" :="" :="" :="" :="" 7t7="" :7="" fig="" 1="" [see="" table="" 2="" ra="" option="" shown="" 5‘="" see="" noie="" 2’="" w="" yaele="" 1="" :="" 1aele2="" post="" ,.="" ,.="" 1="" height="" a="" options="" '5":="" 010="" table="" 3="" none,="" -ra,="" -ra-k="" as“="" 2="" 290="" tail="" option="" pin="" ”1="" fin="" 82="" .01="" .120="" [39951="" ev,="" es,="" el="" 120="" a="" as="" .m="" “swam="" “man="" -02="" 075="" [1="" 91]="" {j="" 135="" c!="" 43="" -ra="" -k="" t—istsmxx="" t-1515vbb-xx="" ’03="" 065="" [1="" 63="" ec="" 150="" 3="" 8t="" 4:0="" t—isism—xx="" t-istsoe—xx="" 704="" .150="" [3,81]="" fe="" (see="" note)="" 283="" 7="" t9="" 41e="" t—istsos—xx="" t-isisflb—xx="">
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
DO NOT
SCALE FROM
THIS PRINT
.016
SQ
0.41
REF (TYP)
AREA
CONTACT
"A"
(SEE TABLE 1 & NOTE 8)
.099 2.51
REF
2
MAX SWAY
(EITHER DIRECTION)
2
MAX SWAY
(EITHER DIRECTION)
C
FIG 1
FTSH-1XX-XX-XXX-D-RA SHOWN
-ES: END SHROUDS
(-02 & -03 LEAD STYLE ONLY- SEE FIG 2, SHT 2)
(9 POS PER ROW MIN)
(MUST USE FTSH-50-D)
-EL: SHROUD LOCK
(-02 & -03 LEAD STYLE ONLY- SEE FIG 4, SHT 2)
(9 POS PER ROW MIN)
(USE ONLY WHEN MATING WITH CLP)
(MUST USE FTSH-50-D)
-EP: GUIDE POST
(-02 & -03 LEAD STYLE ONLY- SEE FIG 5, SHT 2)
(9 POS PER ROW MIN)
(USE ONLY WHEN MATING WITH CLP)
(MUST USE FTSH-50-D)
-EJ: EJECTOR SHROUD
(SEE FIG 3, SHT 2)
(SEE NOTE 5)
(MUST USE FTSH-50-D)
-K: KEYING SHROUD
(-01 LEAD STYLE ONLY- SEE FIG 1, -K OPTION)
(POS 05, 08, 10, 13, 15, 17, 20, 25 ONLY)
(USE ONLY WITH -RA TAIL OPTION)
(MUST USE FTSH-XX-CN-XX)
FTSH-1XX-XX-XX-D-XX-XX
No OF POSITIONS
-02 THRU -50
(PER ROW)
LEAD STYLE
-01: .120 [3.05]
-02: .075 [1.91]
-03: .065 [1.65] MIN
-04: .150 [3.81]
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,
90 / 10 ± 5% TIN LEAD ON TAIL
OPTIONS
-D: DOUBLE ROW
-RA: RIGHT ANGLE
-FC: FLEX CARD (MUST USE FTSH-50-D)
(-01 LEAD STYLE ONLY, FOR USE WITH FCF)
-FE: FLEX CARD ELEVATED (MUST USE FTSH-50-D)
(-01 LEAD STYLE ONLY, FOR USE WITH FCF)
PLATING SPECIFICATION
TAIL OPTION
.135 3.43
REF
No OF POS x .0500 [1.270] - .003 [.08]
No OF POS x .0500 [1.270] - .0500 [1.270]
.050 1.26
01
02 50
49
C
+.005 [0.13]
- .010 [0.25]
90°
±3°
"B"
(SEE TABLE 2
& SEE NOTE 2)
.050 1.27
.050 1.27
2
MAX SWAY
(EITHER DIRECTION)
C
FTSH-50-D
PIN #2
(SEE TABLE 3)
C
PIN #1
(SEE TABLE 3)
C
-RA OPTION SHOWN
.200
REF
5.08
& SEE NOTE 2)
"B"
(SEE TABLE 2
FTSH-XX-CN-XX
-K OPTION SHOWN
KEYING NOTCH
TO BE LOCATED
THIS SIDE, AWAY
FROM -RA TAILS
C
ROW SPECIFICATION
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 1
.XXX:
.005 [.13]
.XXXX:
.0010 [.025]
MATERIAL:
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
BY:
FTSH-1XX-XX-XX-D-XX-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
08/17/1995
3
1
SHEET SCALE: 5:1
INSULATOR: BLACK LIQUID CRYSTAL POLYMER
TERMINAL: PHOSPHOR BRONZE, ALLOY No. 510
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. TERMINALS TO BE SHEARED TO MEET DIMENSION SPECIFICATION.
3. PARTS MAY BE CUT TO POSITION.
4. MINIMUM PUSHOUT FORCE: .5 LB.
5. EJ OPTION IS NOT AVAILABLE AS OF REVISION AG.
APPLICABLE VIEWS ARE REMAINING FOR REFERENCE TO BUILD
INTERNAL ASP ORDERS ONLY. THIS OPTION WAS FOR EXISTING
BUSINESS ONLY. ANY EXISTING CUSTOMERS WILL HAVE PART
NUMBERS SETUP AS INTERNAL ASP'S.
6. MAX BURR ALLOWANCE: .003" [.08"]
7. MAX CUT FLASH: .010 [.25]
8. MAX HEIGHT VARIATION BETWEEN ROWS: .005 [.13]
REVISION BP
[3.15] m EF 090 [2 2%] J: « HG 4 EL OPTION @ 1E3 OPHON ; FTSHVSOVD ‘ .]EE[4.7B] E E i E E E i E E .139[3.531] REF EBEEEEBEE!!! REF 1 1 1 1 1 [W] 1 1 1 1 (No OF POE x .050[1.27]} +.o.s1[1.55] :.oua[.20] a 24%;:22] /F[SH1ES$ * 131E153] 9 n H 153[4.27] .175[451] REF HHHfifiHHHH ’ :% REF [USE ONLY WHEN MAHNG WITH CLP] [D1FFERENI AS SHOWN, OTHERW1SE SAME AS HG 2) No OF PDS x .osu[1.27 No OF PDS x .osu[1.27 1+ .2s7[.s.53] REF 1+ .1s3[3.39] REF 5 7 .1 as [4.75] REF fl; iii-TSHVEL H H .303 [7 63] ififii iHHHHHHHHHHE H [ L FIG 3 1EJ OP11ON $11 SESSEEESSEEEfiQ [ .222[5..ss] REF NO OF POS x 050[1.271+.223[s 65] :.ous[.20] .7 .ovo[2.29] REF .120 1111‘ (23 Li .440[]].]B] CE} .091 [2.31] REF —f REF TN 11111: [ HHiHHEHHHH NO OF POS x .050[1.27] + s.21[15. 77] :..010[251 No OF POS x .uson .27] + 231[5.571 1005mm] '99): [ 1 k .33o[s.35] a 075 191 § *7 REF REF [3‘05] [fir [F1511 EF fll * H H ififli HHHHHHHHHHHH um: FIG 5 7E? oP11oN \USE FBHVEJEHA SUB ASSEM [2 REQ‘D PER ASSEMBLY . E USES I EHAVOZ] WSHVEJ] .1 as [4.73] REF F =% 1:7 4‘ <7 mu[229]="" re="" .29b[7="" eta:="">
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
.139 3.531
REF
(No OF POS x .050[1.27])
+.061[1.55] ±.008[.20]
.188 4.78
REF
FIG 2
-ES OPTION
AVAILABLE IN LEAD STYLE -02 & -03 ONLY
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
FTSH-50-D
.178 4.51
.245 6.22
REF
.168 4.27
REF
FTSH-ES
.090 2.296
REF
.188 4.78
REF
No OF POS x .050[1.27] + .257[6.53] REF
No OF POS x .050[1.27] + .153[3.89] REF
.125 3.18
REF
No OF POS x .050[1.27] + .223[5.66]
±.008[.20]
FTSH-EL
.188 4.78
REF
.090
REF
2.29
.303 7.68
.222
REF
5.65
.091
REF
2.31
FTSH-50-D
±.010[.25]
No OF POS x .050[1.27] + .621[15.77]
.440 11.18
REF
USE FTSH-EJEHA SUB ASSEMBLY
(2 REQ'D PER ASSEMBLY - EACH
USES 1 EHA-02, 1 FTSH-EJ)
.075 1.91
REF
.330 8.38
REF
±.008[.20]
No OF POS x .050[1.27] + .231[5.87]
.120 3.05
No OF POS x .050[1.27] + .156[3.96] REF
FTSH-EP
.090
REF
2.29
.188 4.78
REF
.298 7.56
FIG 4
-EL OPTION
(USE ONLY WHEN MATING WITH CLP)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2)
FIG 3
-EJ OPTION
(FOR EXISTING CUSTOMERS ONLY)
AVAILABLE IN LEAD STYLE -01 ONLY
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
(SEE NOTE 5 ON SHEET 1)
FIG 5
-EP OPTION
(USE ONLY WHEN MATING WITH CLP)
(DIFFERENT AS SHOWN, OTHERWISE
SAME AS FIG 2)
SHEET OF
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
BY:
FTSH-1XX-XX-XX-D-XX-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
08/17/1995
3
2
SHEET SCALE: 2:1
REVISION BP
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
‘m 1: PACKAGING TU BES I: £ PTVFTSHDOEVRAVEX fl TABLE 4 LEAD STYLE PACKAGING TUBE PLUG —04 (N0 OPTIONS) 412, 703. (NO OPTIONS) —01-FC PTVFI'SHOOSVRA T1124 m-FE {NRA —02—EL, —03—EL oers, roarEs PT-FTSHDUa-RA»EX TP-os oz-EP, -03—EP —01-EJ PT—1-24—06-40 TR-03 OWVRAVK P14240338 T1303 PTVFTSHDOEVRAVEX PT71724706740 mm Emu NOVE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
**
-K
PT-FTSH005-RA
-ES
PT-FTSH008-RA-EX
-EP
PT-FTSH008-RA-EX
-EL
PT-FTSH008-RA-EX
-EJ
PT-1-24-06-40
PT-1-24-03-38
PACKAGING TUBES
-RA
SHEET OF
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
BY:
FTSH-1XX-XX-XX-D-XX-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
08/17/1995
3
3
SHEET SCALE: 2:1
REVISION BP
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322

Products related to this Datasheet

CONN HEADER VERT 12POS 1.27MM
Available Quantity: 171
Unit Price: 3.88
CONN HEADER VERT 36POS 1.27MM
Available Quantity: 125
Unit Price: 8.47
CONN HEADER R/A 26POS 1.27MM
Available Quantity: 100
Unit Price: 11.12
CONN HEADER R/A 8POS 1.27MM
Available Quantity: 90
Unit Price: 3.05
CONN HEADER VERT 26POS 1.27MM
Available Quantity: 58
Unit Price: 8.44
CONN HEADER R/A 30POS 1.27MM
Available Quantity: 43
Unit Price: 9.88
CONN HEADER VERT 34POS 1.27MM
Available Quantity: 9
Unit Price: 11.57
CONN HEADER VERT 20POS 1.27MM
Available Quantity: 6
Unit Price: 9.01
CONN HEADER VERT 16POS 1.27MM
Available Quantity: 0
Unit Price: 5.17
CONN HEADER VERT 30POS 1.27MM
Available Quantity: 0
Unit Price: 10.625
CONN HEADER VERT 40POS 1.27MM
Available Quantity: 0
Unit Price: 11.48462
CONN HEADER R/A 70POS 1.27MM
Available Quantity: 0
Unit Price: 14.97077
CONN HEADER R/A 80POS 1.27MM
Available Quantity: 0
Unit Price: 17.11818
CONN HEADER VERT 46POS 1.27MM
Available Quantity: 0
Unit Price: 10.939
CONN HEADER R/A 8POS 1.27MM
Available Quantity: 0
Unit Price: 3.56
CONN HEADER R/A 8POS 1.27MM
Available Quantity: 0
Unit Price: 3.56
CONN HEADER R/A 8POS 1.27MM
Available Quantity: 0
Unit Price: 3.56
CONN HEADER R/A 52POS 1.27MM
Available Quantity: 0
Unit Price: 13.96
CONN HEADER R/A 52POS 1.27MM
Available Quantity: 0
Unit Price: 0
CONN HEADER R/A 82POS 1.27MM
Available Quantity: 0
Unit Price: 0
CONN HEADER R/A 82POS 1.27MM
Available Quantity: 0
Unit Price: 0
CONN HEADER R/A 82POS 1.27MM
Available Quantity: 0
Unit Price: 0
CONN HEADER R/A 100P 1.27MM
Available Quantity: 0
Unit Price: 0
CONN HEADER R/A 100P 1.27MM
Available Quantity: 0
Unit Price: 0
CONN HEADER R/A 100P 1.27MM
Available Quantity: 0
Unit Price: 0
CONN HEADER R/A 100P 1.27MM
Available Quantity: 0
Unit Price: 0
CONN HEADER R/A 100P 1.27MM
Available Quantity: 0
Unit Price: 0
CONN HEADER R/A 90POS 1.27MM
Available Quantity: 0
Unit Price: 23.77
CONN HEADER R/A 90POS 1.27MM
Available Quantity: 0
Unit Price: 23.77
CONN HEADER R/A 100P 1.27MM
Available Quantity: 0
Unit Price: 23.77