209, 210 Series Datasheet by CTS Electrocomponents

50:? -9 Sense M m l Code Spec positions E Extended height actuator (0 6mm/.024") 2 2 position; M Medium actuator (0.25mm/ cm”) 3 3 position; LP Low profile (Husn) 4 4 position; 5 5 position; 5 5 position; 7 7 ““5““ BLANK Aoto ;ertaole terminal 3 3 position; . D Straight terminai 9 9 position; 10 10 po;ition; 12 12 po;ition; Code Eiank www.ctscorpLom Top tape seal No top tape seal ( Not availabie on extended actuator)

equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.

2018-04-9 Rev. C Page 1 of 3

Series 209/210

Through-Hole DIP Switch

▪ Available with low profile, medium, and extended height

actuators

▪ Series 209 – premium gold plated beryllium copper contacts

▪ Series 210 – economical gold flash beryllium copper contacts

▪ Low profile body

▪ RoHS compliant

▪ Optional top tape seal for board spray washing

Description

These versatile, low profile switches, are available with auto-insertable or hand-insertable terminal styles. The

switches feature a positive detent feature separate from the contactor so it does not deflect during actuation.

The molded body paired with the optional top tape seal provides optimum protection during soldering

processes that includes board spray washing. This versatile switch is an ideal choice for most SPST applications.

Ordering Information

Code

Spec.

Extended height actuator (0.6mm/.024”)

Medium actuator (0.25mm/.010”)

Low profile (Flush)

Code

Spec.

BLANK

Ship at ON position

Ship at OFF position

Notes: Contact CTS for other common features not listed.

Code

No. of switch

positions

2 positions

3 positions

4 positions

5 positions

6 positions

7 positions

8 positions

9 positions

10 positions

12 positions

Code

Top tape seal

Blank

No top tape seal

Top tape seal

( Not available on extended actuator)

Code

Spec.

BLANK

Auto-insertable terminal

Straight terminal

Series

Number of Actuator

Switch Positions

Height

B Bottom Seal

Top Tape Seal

S Shipping Position

Terminal Type

Shipping Position

209/210- XX M S T F D

CS Parameter Conditions 81 Remarks Min Max Unit At end of life 50 insulated terminals adjacent switches switches 50 VDC Actuation Life 1209i Actuation Life 12105) 2,000 cycles switching 100mA @ 20 VDC or .1mA @ 5 VDC(dry circuit) 1,000 cycles switching 100mA @ 20 VDC or .lmA @ 5 VDCIdry circuit) Soldering Maximum wave temperature, 260°C for 5 seconds MSL Level 1 RoHS Lead-Free. Fully compliant to RoHS Directive 2011/65/EU with no contact inconsistencies greater than 1 microsecond no contact inconsistencies greater than 1 microsecond Seal Bottom seal standard, optional top tape seal for board spray washing Marking Special top marking available-consult CTS Packaging: Standard anti-static tube packaging Range Range www.ctscorp.com

equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.

Series 209/210

Through-Hole DIP Switch

2018-04-9 Rev. C Page 2 of 3

Electrical Specifications

Parameter

Conditions & Remarks

Min

Max

Unit

Contact Resistance (209)

Initial

At end of life

milliohms

Contact Resistance (210)

Initial

At end of life

100

500

milliohms

Insulation Resistance

Between

insulated terminals

1000

megohms

Dielectric Strength

500 VAC between

adjacent switches

minute

Switch Capacitance

Between adjacent closed

switches

5.0

Non-switching Rating

100

VDC

Circuit

SPST

positions

Mechanical and Environmental

Actuation Life (209)

2,000 cycles switching 100mA @ 20 VDC or .1mA @ 5 VDC(dry circuit)

Actuation Life (210B)

1,000 cycles switching 100mA @ 20 VDC or .1mA @ 5 VDC(dry circuit)

Soldering

Maximum wave temperature, 260°C for 5 seconds

MSL

Level 1

RoHS

Lead-Free. Fully compliant to RoHS Directive 2011/65/EU

Shock

Per MIL-STD-202F, method 213B, condition A (50G’s)

with no contact inconsistencies greater than 1 microsecond

Vibration

Per MIL-STD-202F, method 204D, condition B (.06” or 15G’s between 10 HZ to 2K HZ) with

no contact inconsistencies greater than 1 microsecond

Seal

Bottom seal standard, optional top tape seal for board spray washing

Marking

Special top marking available-consult CTS

Packaging:

Standard anti-static tube packaging

Storage Temperature

Range

-40°C to +85°C

Operating Temperature

Range

-40°C to +85°C

CS Series 209 / 210 Contact Features 1. Value of Redundant [Blfurcmem Contacts: Redundancy 2- WIpmg comm man dramaticaIly reduces lhe prubabIIIly or Contact lailure, IMPROVING RELIABILITY, 2. Value of Wiplng Contact Action: Clean Contact area, IMPROVING RELIABILITY. 3. Value of Contactor Not Dellecting During Actuation : Constant wntacl pressure eliminates overstressing contacts, IMPROVING RELIABILITY. 3- leacwrdoes "0i 4' Dem“ separate 1. Value of Delent Separate from ““9“ “mm ““3“" "cm comm” Contactor: Separate delent allows optImIzatIon oi nondeﬂectlng conIactor and delent desIgns. IMPROVING 1 . Redundant (beurcated) cross realaI contactcr RELIABILITY, Ii. :3: V m 'A' NO OF N nm "a; L m OVERALL szch i Mﬁ‘ cmwiﬁlz) DIMENSION POSITIONS mm Lu m I ma 555/253 2 DAIECUDE '7 T5 / ans/355 3 W91; W W mama . 2641?!) w r M Ian/555 5. A25 1’ 32” .nts Aura INSERrAELE rEiMINAL ‘5 7” 555 5 Isis/753 7 SERIES Dzsmwumm. 11m 2‘ w 55., 5 2mm 9 v '3‘; no m _ W W 2337M use 10 m In) mes/125:3 I; M A 59 max ............—I 25 m if 3an ‘ ‘5 we , w: J W» . . . . . . . . . . e nzzgnm m f m 254 m 7 “"3 Wu TY: mam: DIMENSION i m www.ctscorp.com

equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.

Series 209/210

Through-Hole DIP Switch

2018-04-9 Rev. C Page 3 of 3

Mechanical Specifications

Series 209 / 210 Contact Features