AML, MML Selection Guide Datasheet by Honeywell Sensing and Productivity Solutions

View All Related Products | Download PDF Datasheet
Honeywell Sensing and Control AML/MML Selection Guide
B A 2 fl TIT T T T | f $ 13 % all
Honeywell Sensing and Control AML/MML Selection Guide
AML11 Solid state pushbutton switches
AML11 INCANDESCENT OR NON-LIGHTED DISPLAY ORDER GUIDE
Housing
Type
Standard Bezel
AML11B Square non-lighted
AML11C Square 1 lamp ckt.
AML11E Rect. non-lighted
AML11F Rect. 1 lamp ckt.
AML11G Rect. 2 lamp ckts.
Full Guard Bezel
AML11H Square non-lighted
AML11J Square 1 lamp ckt.
AML11K Rect. non-lighted
AML11L Rect. 1 lamp ckt.
AML11M Rect. 2 lamp ckts.
AML11B
Bezel
Color
B
Black
B
Incandescent
Lamp Type
A
No lamp
installed
E
28 V lamp
A
Terminal
Type
2
.110 x .020
(solder or
quick-connect)
3
.025 x .025
(printed, circuit
or push-on)
2
Circuitry
Codes
EA
4.5-24 VDC EA E E
Sinking Momentary Alternate
Discount BE Example: AML11BBA2EA
Schedule Qty.: 25 pieces/listing Square, pushbutton switch housing, non-lighted; black bezel; .110 x .020
Unclass. termination; momentary action; current-sinking output for use with 5-volt supply.
AML12 Solid state pushbutton switches
AML12 LED DISPLAY ORDER GUIDE
Housing
Type
Standard Bezel
AML12C Square 1 LED
Full Guard Bezel
AML12J Square 1 LED
AML12C
Bezel
Color
B
Black
B
LED Color/
Voltage
Red
BV
C5V
Yellow
J5V
M24V
Green
S5V
X24V
B
Terminal Type/
Diode Protection
2
.110 x .020
(solder or
quick-connect)
3
.025 x .025
(printed, circuit
or push-on)
8
.110 x .020
with diode
protection
2
Circuitry
Codes
EA
4.5 - 24 EA EE
VDC Momentary Alternate
Sinking
Discount BE Example: AML12CBB2EA
Schedule Qty.: 25 pieces/listing Square, pushbutton switch housing; black bezel; red LED; .110 x .020
Unclass. termination; current-sinking output for use with 5-volt supply; momentary action.
CP-1 Honeywell Sensing and Control Availability of options is subject to change without notice
—4N —IW 4‘0! —4N
Honeywell Sensing and Control AML/MML Selection Guide
AML21 Electronic control pushbutton switches
AML21 INCANDESCENT OR NON-LIGHTED DISPLAY ORDER GUIDE
Housing
Type
Standard Bezel
AML21B Square non-lighted
AML21C Square 1 lamp ckt.
AML21E Rect. non-lighted
AML21F Rect. 1 lamp ckt.
AML21G Rect. 2 lamp ckts.
Full Guard Bezel
AML21H Square non-lighted
AML21J Square 1 lamp ckt.
AML21K Rect. non-lighted
AML21L Rect. 1 lamp ckt.
AML21M Rect. 2 lamp ckts.
AML21B
Bezel
Color
B
Black
B
Incandescent
Lamp Type
A
No lamp
installed
B
6 V lamp
C
14 V lamp
E
28 V lamp
A
Terminal
Type
2
.110 x .020
(solder or
quick-connect)
3
.025 x .025
(printed ckt.
or push-on)
2
Circuitry Codes
(Each pole has double-throw)
AA
Discount BE Example: AML21BBA2AA
Schedule Qty.: 25 pieces/listing Square, pushbutton switch housing, non-lighted; black bezel; .110 x .020
Unclass. termination; 1-pole, double throw; silver contacts.
Mom. Action.
AA 1-pole
AC 2-pole
CC 4-pole
Alt. Action
AB 1-pole
AD 2-pole
CD 4-pole
Mom. Action
BA 1-pole
BC 2-pole
DC 4-pole
Alt. Action
BB 1-pole
BD 2-pole
DD 4-pole
Mom. Action
EA 1-pole
EC 2-pole
Silver
Contacts
Gold
Contacts
Gold-plated
Silver
Contacts
AML22 Electronic control pushbutton switches
AML22 LED DISPLAY ORDER GUIDE
Housing
Type
Standard Bezel
AML22C Square 1 LED
AML22H Square 1 high
profile LED (for use
with AML-52A
buttons)
Full Guard Bezel
AML22J Square 1 LED
AML22C
Bezel
Color
B
Black
B
LED Color/
Voltage
Red
BV
C5V
D10V
E15V
F24V
Yellow
HV
J5V
K10V
L15V
M24V
Green
RV
S5V
T10V
W15V
X24V
B
Terminal
Type
2
.110 x .020
(solder or
quick-connect)
3
.025 x .025
(printed ckt.
or push-on)
8
.110 x .020
with diode
protection
2
Circuitry Codes
(Each pole has double-throw)
AA
Discount BE Example: AML222CBB2AA
Schedule Qty.: 25 pieces/listing Square, pushbutton switch housing with one LED, black bezel; red LED (without
Unclass. resistor); .110 x .020 termination; momentary action; 1-pole, double throw; silver
contacts.
Mom. Action.
AA 1-pole
AC 2-pole
Alt. Action
AB 1-pole
AD 2-pole
CD 4-pole
Mom. Action
BA 1-pole
BC 2-pole
Alt. Action
BB 1-pole
BD 2-pole
DD 4-pole
Silver
Contacts
Gold
Contacts
Availability of options is subject to change without notice Honeywell • Sensing and Control CP- 2
CIRCUITRY 0PERA'I1NG ACTION —3 i i No an AA BA 01 § 2 I 3 2 T 5 z I 3 2 T s z 7 MN"! “me “3"“ oz Ac no ‘4 \ I W Mom None MEIM 3H2. H32?§2| 32? 327 03 (Nor'r‘llwmnaled .\.—. 0—“. .w—. .v. W. Mam None Mom. v 5 5 a 4 a 5 4 a H swutchesomy) ‘ 5 5 4 5 5 ‘ 3—Posman CA DA ‘ 04 3 z . g—g’: {3—1 g—{g g—g’f Main! Main! Malm .\._. W \_. p... . V as 554 ”:35. 65« $53 Mam Malnl Mom 06 cc CC :11 FT? f3“. 37’? 3—3”? Ma“ Ma” “'0'“- v N—c ._./. p.“ w». . ”7 (Non-Illuminated a s . s s 4 s 5 . c 5 . :11 Mom, Malnl. Malm swflcheson‘y) w... 0—0/- .\._. W. W. 9 a 7 9 a 7 s . 7 s a 1 9 a 7 .x.. W. a... .\._. W. )2 u .o .2 n m .2 u 10 .2 u .0 >2 n I0
Honeywell Sensing and Control AML/MML Selection Guide
AML23 Solid state pushbutton switches
AML23 INCANDESCENT OR NON-LIGHTED DISPLAY ORDER GUIDE
Housing
Type
AML23E
Operator/
Bezel Color
B
Black/Black
B
Incandescent
Lamp Type
A
No lamp
installed
B
6 V lamp
C
14 V lamp
E
28 V lamp
A
Terminal
Type
2
.110 x .020
(solder or
quick-connect)
3
.025 x .025
(printed, ckt.
or push-on)
2
Discount BE Example: AML23EBA2AA01
Schedule Qty.: 25 pieces/listing Rectangular, non-lighted paddle switch housing; black paddle and bezel;
Unclass. .110 x .020 terminals; with one circuit ON and one circuit OFF in each extreme
operator position (maintained).
! for non-illuminated switches only.
AML23E
Rectangular
non-lighted
AML23F
Rectangular
1 lamp ckt. (A)
AML23G
Rectangular
2 lamp ckts.(A & B)
Circuitry
Codes
Silver Contacts
AA 1-pole
AC 2-pole!
CA 2-pole
CC 4-pole!
Gold Contacts
BA 1-pole
Insert code
letters as shown
in Circuitry Chart
AA
Operating
Action
No
charge
Insert Code
numbers from
Operating
Action Chart
01
CP-3 Honeywell Sensing and Control Availability of options is subject to change without notice
AML CIRCUITRY 0PERA'I1NG ACTION —3 i i No an AA BA 01 § 2 I 3 2 T 5 z I 3 2 T s z 7 MN"! “me “3"“ oz Ac no ‘4 \ I W Mom None MEIM 3H2. H32?§2| 32? 327 03 (Nor'r‘llwmnaled .\.—. 0—“. .w—. .v. W. Mam None Mom. v 5 5 a 4 a 5 4 a H swutchesomy) ‘ 5 5 4 5 5 ‘ 3—Posman CA DA ‘ 04 3 z . g—g’: {3—1 g—{g g—g’f Main! Main! Malm .\._. W \_. p... . V as 554 ”:35. 65« $53 Mam Malnl Mom 06 cc CC :11 FT? f3“. 37’? 3—3”? Ma“ Ma” “'0'“- v N—c ._./. p.“ w». . ”7 (Non-Illuminated a s . s s 4 s 5 . c 5 . :11 Mom, Malnl. Malm swflcheson‘y) w... 0—0/- .\._. W. W. 9 a 7 9 a 7 s . 7 s a 1 9 a 7 .x.. W. a... .\._. W. )2 u .o .2 n m .2 u 10 .2 u .0 >2 n I0
Honeywell Sensing and Control AML/MML Selection Guide
AML25 Electronic control paddle switches
AML25 LED DISPLAY ORDER GUIDE
Operator/
Bezel Color
B
Black/Black
B
Terminal Type/
Diode Protection
2
.110 x .020
(solder or
quick-connect)
3
.025 x .025
(printed ckt.
or push-on)
8
.110 x .020
with diode
protection
2
Circuitry
Codes
Silver Contacts
AA
1-pole
CA
2-pole
Gold Contacts
BA
1-pole
DA
2-pole
Insert code letters
as shown in
Circuitry Chart
AA
Discount BE Example: AML25FBB2AA01RX
Schedule Qty.: 25 pieces/listing Rectangular paddle switch; illuminated with one red LED, this device has a black
Unclass. paddle and bezel, and .110 x .020 terminals; with one circuit ON and one circuit OFF
in each extreme operator position (maintained).
Housing
Type
AML25F
Rectangular
1 LED
AML25G
Rectangular
2 LEDs
AML25F
LED
Voltage
B
V
C
5 V
D
10 V
E
15 V
F
24 V
B
Operating
Code
No
charge
Insert
code
numbers
from
Operating
Action
Chart
01
LED Color
(LED A)
R
Red
Y
Yellow
G
Green
X
No LED
R
LED Color
(LED B)
R
Red
Y
Yellow
G
Green
X
No LED
X
Availability of options is subject to change without notice Honeywell • Sensing and Control CP- 4
CIRCUITRY 0PERA11NG ACTION i i No an AA BA 01 § 2 I 3 2 T 5 z I 3 2 T s z 7 MN"! “me “3"“ oz Ac no I . w \ I W Mom None MEIM 3 2 I 3 2 T 3 2 I 3 2 T 3 2 7 I): (NorHIIWImaIed .\.—. 0—“. .w—. .v. W. MaInL None Mom. I 5 5 a 4 a 5 4 5 H sWIIchesonIy) ‘ 5 5 4 5 5 ‘ 3—Posman CA DA ‘ 04 3 z . g—g’: {3—1 g—{g g—g’f MaIm Malnl MaIM .\._. W \_. p... . V as 554 ”:35. 55« $53 Mam MaInI Mom 06 CC ”C 33-: 5'3”? f3“. 37’? 3—3”? Mam“ Mam MW“- v N—c ._./. p.“ .m . ”7 (Non-Illuminated a s . s s I s 5 I c I . :11 Mom, MaInl. Malm swflchesonw) w... 0—0/- .\._. W. W. 9 a 7 9 a 7 s . 7 s a 1 9 a 7 .\_. ._./. a... .\._. W. I: I. .0 I2 ll I0 I: H Io I2 ll I0 I2 II I0
Honeywell Sensing and Control AML/MML Selection Guide
AML24 Electronic control rocker switches
AML24 INCANDESCENT OR NON-LIGHTED DISPLAY ORDER GUIDE
Housing
Type
AML24E
Bezel
Color
B
Black
B
Incandescent
Lamp Type
A
No lamp
installed
B
6 V lamp
C
14 V lamp
E
28 V lamp
A
Terminal
Type
2
.110 x .020
(solder or
quick-connect)
3
.025 x .025
(printed ckt.
or push-on)
2
Discount BE Example: AML24EBA2AA01
Schedule Qty.: 25 pieces/listing Rectangular, non-lighted rocker switch housing; black bezel; 110 x .020 terminals;
Unclass. .with one circuit ON and one circuit OFF in each extreme operator position (maintained).
! for non-illuminated switches only.
AML24E
Rectangular
non-lighted
AML24F
Rectangular
1 lamp ckt. (A)
AML24G
Rectangular
2 lamp ckts.
Circuitry
Codes
Silver Contacts
AA 1-pole
AC 2-pole!
CA 2-pole
CC 4-pole!
Gold Contacts
BA 1-pole
BC 2-pole!
DA 2-pole
DC 4-pole!
Insert Code letters
as shown in
Circuitry Chart
AA
Operating
Action
No
charge
Insert Code
numbers from
Operating
Action Chart
01
CP-5 Honeywell Sensing and Control Availability of options is subject to change without notice
AML B B CIRCUITRY OPERATING ACTION 5mm Gold 2—PosItIon 3—PosItIon Comaas Conlacks ! g a \ :5 2% é , . 2—Pos an M 5‘ .W—I 0—9“. I“ IV. 0—0“. I 01 3 2 I 3 2 l a 2 I 3 2 I s z I MaInI None Maw 02 Ac ac . “,4 v W Mom None MEIM Sal 32?32I 32? 327 03 (Nor'r‘llmlnaled .\.—. 0—“. .w—. .v. W. Mamt None Mom. switchesomy) e s d a 5 4 a 5 4 a 5 4 s 5 4 3—Posnlan CA DA n M a 2 I “'3 2 7 gr , g—f 7 g—f 1 Mew Mew MaIM o‘v—c W. o‘i—c n‘O—C W 05 554 a5«554 ss« 55: Mam MaInI Mom cc DC ._.« \F. ._., ._., as g 3“. 3 2 7 a 2 . , z 7 3 z .' MaIMI MaInI. Mom. . v w». W. .\_. wk. ._.«. o1 ‘Qgfic'fl‘gm‘m 5 5 ' 5 9 ‘ 5 5 ‘ 6 5 ‘ ‘ 5 4 Mom, anI. MEIM Y) 0‘»— ...4 w... p—y. n—w. 9 a 7 9 a 7 s t 7 s a 1 9 a 7 .\_. W. p... .\._. W. I: II .0 I2 ll I0 I: II Io I2 II .0 I2 II I0
Honeywell Sensing and Control AML/MML Selection Guide
AML26 Electronic control rocker switches**
AML26 LED DISPLAY ORDER GUIDE
Bezel
Color
B
Black
B
Terminal Type/
Diode Protection
2
.110 x .020
(solder or
quick-connect)
3
.025 x .025
(printed ckt.
or push-on)
8
.110 x .020
with diode
protection
2
Circuitry
Codes
Silver Contacts
AA
1-pole
CA
2-pole
Gold Contacts
BA
1-pole
DA
2-pole
Insert Code letters
as shown in
Circuitry Chart
AA
Discount BE Example: AML26FBB2AA01RX
Schedule Qty.: 25 pieces/listing Rectangular rocker switch; illuminated with one LED, this device has a black bezel,
Unclass. .110 x .020 terminals; with one circuit ON and one circuit OFF in each extreme
operator position (maintained).
** NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing.
Housing
Type
AML26F
1 LED
AML26G
2 LEDs
AML26F
LED
Voltage
B
V
C
5 V
D
10 V
E
15 V
F
24 V
B
Operating
Action
Insert
code
numbers
from
Operating
Action
Chart
01
LED Color
(LED A)
R
Red
Y
Yellow
G
Green
X
No LED
R
LED Color
(LED B)
R
Red
Y
Yellow
G
Green
X
No LED
X
Availability of options is subject to change without notice Honeywell • Sensing and Control CP- 6
blnaflnns
Honeywell Sensing and Control AML/MML Selection Guide
AML27 Electronic control keylock switches ****
AML27 NON-LIGHTED ORDER GUIDE
Bezel
Color
B
Black
B
Terminal
Type
2
.110 x .020
(solder or
quick-connect)
3
.025 x .025
(printed circuit
or push-on)
2
Circuitry Codes
(each pole has
double throw)
Silver Contacts
AA
1-pole
AC
2-pole
Gold Contacts
BA
1-pole
BC
2-pole
AA
Housing
Type
AML27A
Square
housing
non-lighted
AML27A
Button
Color
K
Black
K
Key
Com-
binations
(Two keys
furnished)
BA BB
BK BC
BL BD
BE BS
BF BW
BA
Operation Action
(key out in center position,
except where noted)
21
CCW Center CW
21
None Maint. Maint.
22*
None Maint. Maint.
23
None Maint. Mom.
24
Maint. Maint. Maint.
25
Mom. Maint. Mom.
26**
Maint. Maint. Maint.
27***
Mom. Maint. Maint.
28***
Maint. Maint. Maint.
29†
Maint. Maint. Maint.
30†
Maint. Maint. Mom.
31††
Maint. Maint. Mom.
* Key out in both positions
** Key out in all three positions
*** Key out in center and CW positions
Key out in center and CCW positions
†† Key out in CCW only
!
Key Key Catalog
Combi- Code Listing
nation
BA 110 30PA101-AML
BB 109 30PA102-AML
BD 107 30PA104-AML
BE 106 30PA105-AML
BS 117 30PA117-AML
BT 118 30PA118-AML
BV 119 30PA119-AML
BW 120 30PA120-AML
Note: These keys fit the 5-bit keylocks
in the Order Guide
Discount BE
Schedule Qty: 25 pieces/listing
Unclass.
REPLACEMENT KEYS
One key per listing
Five piece minimum order quantity for keys
!
Specify different key combinations to acquire different keys, i.e.:
AML27ABK2AA21BB and AML27ABK2AA21BE have different keys.
AML27ABK2AA21BB and AML27ABK3BC25BB have identical interchangeable keys.
28 and 29 operating actions should be used with key combinations BA or BB.
Example: AML27ABK2AA21BA Square housing; black bezel and button; .110 x .020 terminals;
2-pole double-throw; silver contacts; 3-position maintained and key code “BB”.
CP-7 Honeywell Sensing and Control Availability of options is subject to change without notice
**** NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing.
—u> TIT T AML B c 7 AA TIT T T T T
Honeywell Sensing and Control AML/MML Selection Guide
AML31 Power duty pushbutton switches*
AML31 INCANDESCENT OR NON-LIGHTED DISPLAY ORDER GUIDE
Housing
Type
Standard Bezel
AML31E Rect. non-lighted
AML31F Rect. 1 lamp ckt.
Full Guard Bezel
AML31L Rect. 1 lamp ckt.
AML31E
Bezel
Color
B
Black
B
Incandescent
Lamp Type
A
No lamp
installed
B
6 V lamp
C
14 V lamp
E
28 V lamp
A
Terminal
Type
4
.187 x .020
(solder or
quick-connect)
4
Circuitry
Codes
AC
2-pole, single-throw,
normally open, Form X
AD AC
Alt. action Mom. Action
Discount BE Example: AML31EBA4AC
Schedule Qty.: 25 pieces/listing Rectangular pushbutton switch housing, non-lighted; black bezel; .187 x .020
Unclass. terminals; momentary action; 2-pole, single-throw, normally open, Form X
* NOTE: Contact Customer Service for a minimum quantity required to establish or reinstate a catalog listing.
AML32 Power duty pushbutton switches*
AML32 NEON DISPLAY ORDER GUIDE
Housing
Type
Standard Bezel
AML32F Rect. 1 Neon lamp
Full Guard Bezel
AML32L Rect. 1 Neon lamp
AML32F
Bezel
Color
B
Black
B
Neon Lamp
Voltage/Color
Red
B125 VAC
C250 VAC
Clear
K125 VAC
L250 VAC
Green
M125 VAC
P250 VAC
C
Terminal Type
Lamp Circuit
4
.187 x .020
(solder or
quick-connect)
with isolated
lamp circuit
7
.187 x .020
with integral
lamp circuit
7
Circuitry
Codes
AA
2-pole, single-throw,
normally open, Form X
AD AC
Alt. action Mom. Action
Discount BE Example: AML32FBC7AC
Schedule Qty.: 25 pieces/listing Rectangular pushbutton switch housing; black bezel; 250 volt, red neon lamp;
Unclass. .187 x .020 terminals with integral lamp circuit; momentary action; 2-pole, single-
throw, normally open, Form X
* NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing.
Availability of options is subject to change without notice Honeywell • Sensing and Control CP- 8
B A 4 AA 01 T T T T T é<9 %="" %="" t="" f="" a?="" %="">
Honeywell Sensing and Control AML/MML Selection Guide
AML33 Power duty paddle switches*
AML33 INCANDESCENT OR NON-LIGHTED DISPLAY ORDER GUIDE
Housing
Type
AML33E
Operator/
Bezel Color
B
Black/Black
B
Incandescent
Lamp Type
A
No lamp
installed
A
Terminal
Type
4
.187 x .020
(solder or
quick-connect)
4
Discount BE Example:AML33EBA4AA01
Schedule Qty.: 25 pieces/listing Rectangular, non-lighted device; black paddle and bezel; .187 x .020 terminals;
Unclass. 1-pole, Form A Single Throw; with one circuit ON in one extreme position and OFF
in the other.
* NOTE: Contact Customer Service for a minimum quantity required to establish or reinstate a catalog listing.
AML33E
Rectangular
non-lighted
AML33F
Rectangular
1 lamp ckt.
Circuitry
Codes
Silver Contacts
AA
1-pole
(one Form A
single-throw,
normally open)
AC
2-pole
(Two Form A)
AA
Operating
Action
01
Maint. Maint.
ON OFF
01
AML34 Power duty rocker switches*
AML34 INCANDESCENT OR NON-LIGHTED DISPLAY ORDER GUIDE
Housing
Type
AML34E
Bezel
Color
B
Black
B
Incandescent
Lamp Type
A
No lamp
installed
A
Terminal
Type
4
.187 x .020
(solder or
quick-connect)
4
Discount BE Example:AML34EBA4AA01
Schedule Qty.: 25 pieces/listing Rectangular, non-illuminated device; black paddle and bezel; .187 x .020 terminals;
Unclass. 1-pole, Form A single throw; with one circuit ON in one extreme position and OFF in the
other.
* NOTE: Contact Customer Service for a minimum quantity required to establish or reinstate a catalog listing.
AML34E
Rectangular
non-illum.
AML34F
Rectangular
1 lamp ckt.
Circuitry
Codes
Silver Contacts
AA
1-pole
(one Form A
single-throw,
normally open)
AC
2-pole
(Two Form A)
AA
Operating
Action
01
Maint. Maint.
ON OFF
01
CP-9 Honeywell Sensing and Control Availability of options is subject to change without notice
AML B B 4 AA 01 T T T T T T fie) é AML B B 4 AA 01 T T T T T T 361%
Honeywell Sensing and Control AML/MML Selection Guide
AML35 Power duty paddle switches*
AML35 NEON DISPLAY ORDER GUIDE
Housing
Type
AML35F
Operator/
Bezel Color
B
Black/Black
B
Neon Lamp
Voltage
Red
B
125 VAC
B
Terminal Type/
Lamp Circuit
4
.187 x .020
(solder or
quick-connect)
with isolated
lamp circuit
7
.187 x .020
with integral lamp
circuit (available
with 2-pole
devices only)
4
Discount BE Example:AML35FBB4AA01
Schedule Qty.: 25 pieces/listing Rectangular paddle switch housing; black paddle and bezel; 125 VAC neon lamp;
Unclass. .187 x .020 terminals with isolated lamp circuit; 1-pole, Form A single throw; with
circuit ON in one extreme position and OFF in the other (maintained).
* NOTE: Contact Customer Service for a minimum quantity required to establish or reinstate a catalog listing.
AML35F
Rectangular
1 neon lamp
Circuitry
Codes
Silver Contacts
AA
(One Form A
single-throw)
Available only
with isolated lamp
circuit, term.
type 4
AC
2-pole
(Two Form A)
AA
Operating
Action
01
Maint. Maint.
ON OFF
01
AML36 Power duty rocker switches*
AML36 NEON DISPLAY ORDER GUIDE
Housing
Type
AML36F
Bezel
Color
B
Black
B
Neon Lamp
Voltage
Red
B
125 VAC
C
250 VAC
B
Terminal Type/
Lamp Circuit
4
.187 x .020
(solder or
quick-connect)
with isolated lamp
circuit
7
.187 x .020
with integral lamp
circuit (available
with 2-pole
devices only)
4
Discount BE Example:AML36FBB4AA01
Schedule Qty.: 25 pieces/listing Rectangular rocker switch housing; black bezel; 125 VAC neon lamp; .187 x .020
Unclass. terminals with isolated lamp circuit; 1-pole Form A single throw; with circuit ON in one
extreme position and OFF in the other.
* NOTE: Contact Customer Service for a minimum quantity required to establish or reinstate a catalog listing.
AML36F
Rectangular
1 neon lamp
Circuitry
Codes
Silver Contacts
AA
(One Form A
single-throw)
Available only
with isolated
lamp circuit,
term. type 4.
AC
2-pole
(Two FormA)
AA
Operating
Action
01
Maint. Maint.
ON OFF
01
Availability of options is subject to change without notice Honeywell • Sensing and Control CP- 10
—{N —‘W 4‘0 —4N
Honeywell Sensing and Control AML/MML Selection Guide
AML41/42 Lighted indicators*
AML41 INCANDESCENT DISPLAY INDICATORS ORDER GUIDE
Housing Type
AML41C
Bezel
Color
B
Black
B
Incand.
Lamp Type
A
No lamp installed
B
6 V lamp
C
14 V lamp
E
28 V lamp
A
Terminal
Type
2
.110 x .020
(solder or
quick-connect)
3
.025 x .025
(printed circuit
or push-on)
2
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Example:AML41CBA2
Square (pushbutton style)
indicator housing with one lamp
circuit; black bezel; .110 x .020
termination.
* NOTE: Contact Customer
Service for a minimum quantity
required to establish or reinstate
a catalog listing.
Pushbutton Lens
Style Style
AML41C (Use AML51-J,
Square -K, and -L
1 lamp ckt. buttons only)
AML41D AML41J
Square, Rectangular
2 lamp ckts. 1 lamp ckt.
AML41F AML41K
Rectangular Rectangular
1 lamp ckt. 2 lamp ckts.
AML41G AML41L
Rectangular Rectangular
2 lamp ckts. 3 lamp ckts.
AML42 LED DISPLAY INDICATORS ORDER GUIDE
Terminal Type/
Diode Protection
AML42S
Bezel
Color
B
Black
B
LED Color/
Voltage
Red
BV
C5V
E15V
F24V
Yellow
HV*
J5V
L15V
M24V
Green
RV
S5V
W15V
X24V
C
Housing
Type
AML42C
Square
1 LED
AML42S
Rectangular
1 LED
AML42J
Full guard
bezel with 1 LED
AML42K
Full guard
bezel with high
profile LED
2
28
.110 x .020 .110 x .020
(solder or q.c.) with diode
protection
3
.025 x .025
(printed circuit
or push-on)
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Example:AML42SBC2
Compact indicator with black
bezel; 5 volt red LED; .110 x .020
termination.
* NOTE: Contact Customer
Service for a minimum quantity
required to establish or reinstate
a catalog listing.
CP-11 Honeywell Sensing and Control Availability of options is subject to change without notice
fié —‘> —{N
Honeywell Sensing and Control AML/MML Selection Guide
AML45 Solid state LED annunciators*
AML45 ORDER GUIDE
LED
Color
AML45S
Color of
Housing Bezel
W
White
K
Black
W
LED
Voltage
A
2.4 V
C
10 V
D
15 V
F
24 V
*K
15 V High
Intensity
A
Housing
Type
AML45R
2 LEDs
(for use with
full-screen)
AML45S
2 LEDs
(for use with
split-screen)
RY
Side 1 Side 2
RR
Red Red
YY
Yellow Yellow
GG
Green Green
AA
Amber Amber
HH
Red Red
Discount BE Example:AML45SWA2RY
Schedule Qty.: 25 pieces/listing Split-screen type housing with white bezel, 2.4 V LEDs, .110 x .020
Unclass. termination; red LED in side 1 and yellow LED in side 2
*K must have two LEDs – uses A or H LEDs only
SPACERS: 30PA1-AML (package of 10) - unclassified
* NOTE: Contact Customer Service for a minimum quantity required to establish or reinstate a catalog listing.
Terminal
Type
2
.110 x .020
(solder or
quick-connect)
3
0.25 x 0.25
(printed circuit)
8
.110 x .020
with diode
protection
2
AML51 Button Parts
Catalog Listing Description
Full Filter – Square Translucent "
AML51- Z1 Red
-Z2 Yellow
-Z3 Green
-Z5 White
Full Filter – Rectangular Translucent "
AML51- Z6 Red
-Z7 Yellow
-Z8 Green
Split Filter – Rectangular Translucent "
Catalog listing includes two splits
AML51- Z16 Red
-Z20 White
Split Filter – Rectangular Translucent !
Catalog listing includes two splits
AML51- Z42 Red
-Z43 Yellow
-Z44 Green
-Z46 Clear
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Five piece minimum order quantity
" For use with Clear Cap and Dead Front Buttons
! For use with Projected Color Buttons
NOTE: Projected color buttons are the AML51-C10W and AML51-F10W
Availability of options is subject to change without notice Honeywell • Sensing and Control CP- 12
RT RT w?» %w®® w:
Honeywell Sensing and Control AML/MML Selection Guide
AML51/52 Lens/Buttons
AML51 LENS ORDER GUIDE (for incandescent display AML41J, K and L indicators)
Button Type
(Lens style)
AML51J
Display/Legend
Type
Transmitted Color
10 No legend
20 With legend
Transmitted Color
(clear cap & color insert)
11 No legend
21 With legend
Dead Front
(smoky gray cap &
color insert)
30 No legend
40 With legend
Projected color
(white cap & color insert)
50 No legend
60 With legend
10 R
Full color
or 1st 2nd 3rd
color split color split color split
RRR
Red Red Red
YYY
Yellow Yellow Yellow
GGG
Green Green Green
BBB
Blue Blue Blue
WWW
White White White
A** A** A**
Amber Amber Amber
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Five piece minimum order quantity for
buttons
Example: AML51-J10R
Rectangular lens-type button; full color;
transmitted color, no legend; red
** Not available in projected color
Not all color combinations are available for two and three
piece buttons
AML51-J
AML51-K
AML51-L
AML51 Buttons for switches and indicators
AML51 PUSH BUTTON ORDER GUIDE
Full Color or
1st Color Split
R
Display/Legend
Type
Transmitted Color
10 No legend
20 With legend
Transmitted Color
(clear cap & color insert)
11 No legend
21 with legend
Dead Front
(smoky gray cap &
color insert)
30 No legend
40 with legend
Projected color
(white cap & color insert)
50 No legend
60 with legend
10
AML51-C
For switches or indicators:
AML51-C AML51-F AML51-G
AML51-A AML51-H AML51-N
AML51-B AML51-E AML51-M
AML51-R
For indicators only
AML51-D
*Available with transmitted color (10 or 20) only
R
Red
Y
Yellow
G
Green
B
Blue
W
White
K***
Black
L***
Gray
A**
Amber
Button Type
(Pushbutton Type) 2nd
Color Split
R
Red
Y
Yellow
G
Green
B
Blue
W
White
K***
Black
L***
Gray
A**
Amber
** Available with transmitted and dead-front only
*** Black and gray not recommended for lighted display
AML51-N buttons not available with Display/Legend Types 10 and 20
Note: Dimensions include the .060 in bezel
Example: AML51-C10R
Square full color button; with transmitted color, no legend; red
NOTE: AML51 has a $6.00 net each recurring set-up charge per legend. A one-time charge of $70.00 applies to establish a new
graphic legend.
CP-13 Honeywell Sensing and Control Availability of options is subject to change without notice
RT AML5 fili Eur? GT RT
Honeywell Sensing and Control AML/MML Selection Guide
AML52 Buttons
AML52 BUTTON ORDER GUIDE (for LED/Neon display)
Cover Color
AML52-N
Display/Legend
Type (see note)
Transmitted Color
10
No legend
20
with legend
NOTE:
AML52 and AML53 have
$6.00 net each recurring
set-up charge per legend.
A one-time charge of
$70.00 applies to
establish a new graphic
legend.
10
Button
Type
For LED Devices
AML52-A
AML52-C*
For Neon Devices
AML52-N
* Not available for lighted display
R
½ cover or
one side of Other side of
two-piece cover two-piece cover
RR
Red Red
YY
Yellow Yellow
GG
Green Green
BB
Blue Blue
WW
White White
K* K*
Black Black
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Five piece minimum order quantity for buttons
Example:
AML52-N10R
Rectangular full screen; for use on neon power
switch with transmitted color, no legend; red button.
Button
Color
R
Red
Y
Yellow
G
Green
B
Blue
W
White
K
Black
L
Gray
R
AML53 Covers for paddle switches
AML53 PADDLE SWITCH COVER ORDER GUIDE (for incandescent or non-lighted display)
Paddle Switch
Cover Type
AML53-T
Display/Legend
Type
Transmitted Color
10 No legend
20 With legend
Transmitted Color
(clear cap & color insert)
11 No legend
21 with legend
Dead Front
(smoky gray cap &
color insert)
30 No legend
40 with legend
Projected color
(white cap & color insert)
50 No legend
60 with legend
10
AML53-E
½ Cover
AML53-T
Two-piece cover
Use only with T Covers
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Five piece minimum order quantity for
buttons
Example:
AML53-T10RG
Two-piece cover; with transmitted color,
no legend; red and green.
NOTE: AML52 and AML53 have $6.00
net each recurring set-up charge per
legend. A one-time charge of $70.00
applies to establish a new graphic
legend.
* Not for lighted display
** Not available with projected color
Availability of options is subject to change without notice Honeywell • Sensing and Control CP- 14
G
RT @Ogg Y_| RT
Honeywell Sensing and Control AML/MML Selection Guide
Rocker Color
R
Full rocker,
½ rocker, or Other side of
one side of two-piece
two-piece rockers
rockers
RR
Red Red
YY
Yellow Yellow
GG
Green Green
BB
Blue Blue
WW
White White
K* K*
Black Black
L* L*
Gray Gray
A** A**
Amber Amber
AML54 Rocker switch operators
AML54 ROCKER OPERATOR ORDER GUIDE (for incandescent or non-lighted display)
Rocker Operator
Type
AML54-F
Display/Legend
Type
Transmitted Color
10 No legend
20 With legend
Transmitted Color
(clear cap & color insert)
11 No legend
21 with legend
Dead Front
(smoky gray cap &
color insert)
30 No legend
40 with legend
Projected color
(white cap & color insert)
50 No legend
60 with legend
10
AML54-F
Full rocker
AML54-E
½ rocker
AML54-T
Two-piece rocker
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Five piece minimum order quantity for
buttons
Example:
AML54-F10R
Full rocker; with transmitted color, no
legend; red
NOTE: AML54 and AML55 have $6.00
net each recurring set-up charge per
legend. A one-time charge of $70.00
applies to establish a new graphic
legend.
* Not for lighted display
** Not available with projected color
† Not available for use with AML34 power switches
AML55 Covers for paddle switches
AML55 PADDLE SWITCH COVER ORDER GUIDE (for neon display)
AML55-N
Display/Legend
Type (see note)
Transmitted Color
10
No legend
20
with legend
10
Paddle Switch
Cover Type
AML55-N
Full neon cover
with colored lens
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Five piece minimum order quantity for
buttons
AML55-N covers have a colored lenticular
lens window which extends over the neon
lamp.
Example:
AML55-N10RY
Full neon paddle switch cover; with
transmitted color, no legend; red lens and
yellow cover.
Lens
Color
T
Clear
R
Red
R
Cover
Color
R
Red
Y
Yellow
G
Green
B
Blue
W
White
K
Black
L
Gray
Y
CP-15 Honeywell Sensing and Control Availability of options is subject to change without notice
RT YT
Honeywell Sensing and Control AML/MML Selection Guide
Cover Color
R
½ cover
or LED side of Other side of
two-piece two-piece
covers* covers
RR
Red Red
YY
Yellow Yellow
GG
Green Green
BB
Blue Blue
WW
White White
KK
Black Black
LL
Gray Gray
AML55 Covers for paddle switches
AML55 PADDLE SWITCH COVER ORDER GUIDE (for LED display)
Paddle Switch
Cover Type
AML55-T
Display/Legend
Type
Transmitted Color
10 No legend
20 With legend
10
AML55-E
½ cover (for 1 LED)*
AML55-T
Two-piece cover
(for one LED)
AML55-H
Two-piece cover
(for two LEDs)
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Five piece minimum order quantity for
button.
AML55-E, -T, and -H covers have an
open window which allows LEDs to be
flush with the cover surface.
*NOTES:
1 Only one color code letter is necessary
for AML55-E ½ covers
2 To order a ½-cover without the LED
“window,” specify an AML53-E listing.
Example:
AML55-T10YR
Two-piece cover; with LED window in
one side, transmitted color, no legend;
yellow (LED side) and red (non-LED
side).
NOTE: AML55 has a net $6.00 recurring
set-up charge per legend. A one-time
charge of $70.00 applies to establish a
new graphic legend.
YSee notes below
Availability of options is subject to change without notice Honeywell • Sensing and Control CP- 16
YT RT BT RT @ @@ éfi
Honeywell Sensing and Control AML/MML Selection Guide
Rocker Color
B
½ rocker
or LED side of Other side of
two-piece two-piece
rockers rockers
RR
Red Red
YY
Yellow Yellow
GG
Green Green
BB
Blue Blue
WW
White White
KK
Black Black
LL
Gray Gray
AML56 Rocker switch operators
AML56 ORDER GUIDE (for LED display)
Rocker
Operator Type
AML56-T
Display/Legend
Type (see note)
Transmitted Color
10 No legend
20 With legend
10
AML56-E
½ rocker*
(for 1 LED)
AML56-T
Two-piece rocker
(for one LED)
AML56-H
Two-piece rocker
(for two LEDs)
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Five piece minimum order quantity for
button.
Example:
AML56-T10RB
Two-piece rocker; with LED window in
one side, transmitted color, no legend;
red (LED side) and blue (non-LED side).
R
AML56 Rocker switch operators
AML56 ROCKER OPERATOR ORDER GUIDE (for neon display)
AML56-N
Display/Legend
Type
Transmitted Color
10
No legend
20
with legend
10
Rocker
Operator Type
AML56-N
Full rocker
with colored lens
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Five piece minimum order quantity for
buttons
AML56-N covers have a colored lenticular
lens window which extends over the neon
lamp.
Example:
AML56-N10RY
Full rocker; with transmitted color, no
legend; yellow rocker and red lens
NOTE: AML56 has a $6.00 net each
recurring set up charge per legend. A one-
time charge of $70.00 applies to establish a
new graphic legend.
Lens
Color
T
Clear
R
Red
Y
Yellow
R
Rocker
Color
R
Red
Y
Yellow
G
Green
B
Blue
W
White
K
Black
Y
CP-17 Honeywell Sensing and Control Availability of options is subject to change without notice
RT 1T AML5 fi'i AT N0 BRACKETS 5T AT
Honeywell Sensing and Control AML/MML Selection Guide
AML59 Solid state LED annunciators*
AML59 ORDER GUIDE
Cap
Style
AML59-R
Cap
Color
10
No legend
20*
Negative
Film Legend
21*
Positive
Film Legend
KR
Filter color
Full Split Screen
RRR
Red Red Red
YYY
Yellow Yellow Yellow
GGG
Green Green Green
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Five piece minimum order quantity for
buttons
Examples: AML59-RK10R
Full-screen style, black cap, no legend and
red filter
AML59-SK20RY
Split-screen style, black cap, negative film
legend, red and yellow color filters
*AML59 has a $6.00 net each recurring
set-up charge per legend. A one-time
charge of $70.00 applies to establish a
new graphic legend.
AML59-R
Full screen
AML59-S
Split screen
K
Black
Legend
Type*
10
AML61 Mounting Hardware*
AML61 MOUNTING HARDWARE ORDER GUIDE (for standard strip-mount assemblies)
Type
AML61B
Example: AML61EC5A
Five rectangular cans, plain finish (unpainted), long sides abutting; type A mounting
brackets on long sides, located flush with switch or indicator bezel. (Type T bracket brings top of annunciator bezel flush with top of
.160 in./4,1 mm panel).
* NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing
Square cans
AML61B
Plain finish
AML61J
(Black finish)
Rect. cans
AML61E
Plain finish
AML61K
(Black finish)
Mounting Bracket
Orientation
A
Number
of cans
5
Square Hous.
1
2
3
4
5
6
7
8
9
10
11
12
Rect. Hous.
1
2
3
4
5
6
7
8
9
10
11
12
Mounting Bracket
Location
A
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Availability of options is subject to change without notice Honeywell • Sensing and Control CP-18
*To order one rectangular can with mounting brackets on short sides, specify AML61EB1__ or AML61KB1__.
* NOTE: Contact Customer Service for minimum quantity required to establish or reinstate
a catalog listing
Honeywell Sensing and Control AML/MML Selection Guide
AML71/75/76/78/79 Accessories *
AML71 BARRIER ORDER GUIDE
(Barriers shown in order guide are black)
AML75 PANEL SEAL ORDER GUIDE
Barrier Length Type Catalog Listing
Center AML71SCB
End AML71SEB
Center AML71LCB
End AML71LEB
Short
(For use with square devices and
short-side of rectangular devices)
Long
(For use with long side of rectangular
devices)
For use with:
Square 19Rectangular 19
Description high pushbuttons high pushbuttons Rockers
Base & Seal AML75ABC AML75BBC AML75RBC
AML76 SWITCH ORDER GUIDE
Guard Type Catalog Listing
Square AML76C10T01P
Rectangular AML76F10T01P
AML78 PANEL PLUGS
Description Catalog Listing
Square AML78CB
Rectangular AML78FB
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Notes: Not for use with AML61 mounting hardware
Not for use with AML41J, K, or L lens-type indica-
tors; or AML45 annunciators
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Notes: Multiple units should not be mounted in a
single slot, since this would create an unsealed
space between each unit. AML75 seals are not for
use with barriers, full-guard bezels, AML61
mounting hardware, AML45 annunciators, or
AML41J, K or L lens-type indicators.
AML79 CONNECTOR BLOCK
This connector block can be used with square 1 and 2 pole
AML21 and AML22 switches with .110 x .020 terminals
to enable plug-in wiring.
AML79CC
* NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing
DUMMY HOUSING ORDER GUIDE
Description Catalog Listing
Rectangular (pushbutton) AML78F100
Rectangular (lens indicator) AML78J100
* Order AML51 buttons/lenses for use with dummy housings
CP-19 Honeywell Sensing and Control Availability of options is subject to change without notice
Honeywell Sensing and Control AML/MML Selection Guide
AML91/92 Lamps/LEDs**
AML91 LAMP ORDER GUIDE
AML92 LED ORDER Guide
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Ten piece minimum order quantity for lamps and
LEDs.
Lamp Industry Catalog
Type Lamp No. Voltage Listing
86 6.3 AML91LA86
73 14.0 AML91LA73
85 28.0 AML91LA85
Incandescent
T-1-¾
wedge base
LED Color Quad Chip Six Chip
Red AML92ERY AML92ERL
Green AML92EGY AML92EGL
Yellow AML92EYY AML92EYL
White - AML92EWL*
* For use with white or yellow buttons
** NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing
Availability of options is subject to change without notice Honeywell Sensing and Control CP-20
MML 4R —4w _‘> MML —\X —
Honeywell Sensing and Control AML/MML Selection Guide
MML11 Solid state pushbutton switches*
MML11 LED, INCANDESCENT, OR NON-LIGHTED DISPLAY ORDER GUIDE
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Catalog listing codes for switch,
less assembled display options
Example: MML11KK3AAK
Solid state pushbutton housing (black), no
bezel; PWB terminals; momentary action;
5 VDC, current sinking output, black
plunger
Example: MML11KK3AAKRSDR
As above, except furnished with black
bezel; mounting clips (long sides); red
LED, and red lens installed
Housing Type
(Rectangular)
MML11K
Mounting
K
Black bezel, mtg.
clip/long sides
K
Terminals
3
Printed
wiring board
3
MML11K
Black housing
Circuitry/
Action
AA
5 - 24 VDC sinking,
mom. action
AA
MML21 Electronic control pushbutton switches*
MML21 (RECTANGULAR) LED, INCANDESCENT, OR NON-LIGHTED DISPLAY ORDER GUIDE
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Catalog listing codes for switch,
less assembled display options
Example: MML21KK3AAK
Electronic control pushbutton switch;
rectangular housing (black); bezel (black);
mounting clips on long sides, PWB
terminals; 1-pole momentary action, silver
contacts, black plunger
Example: MML21KK3AAKRSDR
As above, except furnished with red LED
and red lens installed
Housing Type
(Rectangular)
MML21K
Mounting
A
No bezel (PWB
mounting)
K
Black bezel, mtg.
clip/long sides
K
Terminals
3
Printed
wiring board
2
Solder
3
MML21K
Black housing
Circuitry/Action
(Each pole is double throw)
Silver Contacts
AA 1-pole, mom. action
AB 1 pole, alt. action
AC 2-poles, mom. action*
AD 2 poles, alt. action
Gold Contacts
BA 1-pole, mom. action
BB 1 pole, alt. action
BC 2-poles, mom. action*
BD 2 poles, alt. action
* Specify AC or BC for use with encoded umbrella
style buttons.
AA
CP-21 Honeywell Sensing and Control Availability of options is subject to change without notice
* NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing
—47< assemb="" %="" —\3="" assemb="" rt3="" _‘0="" no!="">
Honeywell Sensing and Control AML/MML Selection Guide
Plunger
K
Black
K
LED
(Stanley Type)
XX No LED
RS Red*
YS Yellow*
GS Green*
* Permanently installed.
RS
Lens
For LED Display
DR Red
DY Yellow
DG Green
For incandescent or
non-lighted display
LR Red
LY Yellow
LG Green
LW White
LK Black
DR
Legend
20 with legend
A $6.00 recurring set up
charge per legend. A one-time
charge of $70.00 applies to
establish a new graphic
legend.
Leave this space blank,
if legend not desired
Order MML11 display options assembled to switch by adding codes below.
Stnd.Plunger
(w/o lens)
K
Black
W
White
K
LED
(Stanley Type)
XX No LED
RS Red*
YS Yellow*
GS Green*
* Permanently installed.
RS
Lens
XX No lens*
For LED Display
DR Red
DY Yellow
DG Green
For incandescent or
non-lighted display
LR Red
LY Yellow
LG Green
LW White
LK Black
* Enter XX when 1-piece plunger/lens is
specified and legending is required.
DR
Legend
20
with legend
A $6.00 recurring set
up charge per
legend. A one-time
charge of $70.00
applies to establish a
new graphic legend.
Leave this space blank,
if legend not desired
Order MML21 display options assembled to switch by adding codes below.
1-piece Plunger/Lens
Cap Buttons
For LED Display
HRed
LYellow
NGreen
For incandescent or
non-lighted display
RRed
YYellow
GGreen
ZBlack
Availability of options is subject to change without notice Honeywell Sensing and Control CP-22
MML —‘:U —{IJ
Honeywell Sensing and Control AML/MML Selection Guide
MML21 Electronic control pushbutton switches*
MML21 (SQUARE) LED, INCANDESCENT, OR NON-LIGHTED DISPLAY ORDER GUIDE
Discount BE
Schedulet Qty.: 25 pieces/listing
Unclass.
Catalog listing codes for switch,
less assembled display options
Example: MML21HR3AAKXXDR
Electronic control pushbutton switch; square housing (black); bezel (black) and mounting
clips; PWB terminals; 1-pole momentary action, silver contacts; black plunger, with red
lens installed.
Housing Type
(Square)
MML21H
Mounting
A
No bezel
(PWB mounting)
R
Black bezel/
mtg. clip
R
Terminals
3
Printed
wiring board
2
Solder
3
MML21H
Black housing
Circuitry Action
(Each pole is double throw)
Silver Contacts
AA 1-pole, mom. action
AB 1 pole, alt. action
Gold Contacts
BA 1-pole, mom. action
BB 1 pole, alt. action
AA
CP-23 Honeywell Sensing and Control Availability of options is subject to change without notice
* NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing
W —\x assemb L | no! 4’7
Honeywell Sensing and Control AML/MML Selection Guide
Stnd.Plunger
(w/o lens)
K
Black
W
White
K
LED
XX No LED
LEDs are not permanently
installed in square housings
by Honeywell Sensing and
Control.
Use the MML93L recep-
tacle.
XX
Lens
DR
Legend
20
with legend
A $6.00 recurring set
up charge per
legend. A one-time
charge of $70.00
applies to establish a
new graphic legend.
Leave this space blank,
if legend not desired
Order MML21 display options assembled to switch by adding codes below.
1-piece Plunger/Lens
Cap Buttons
For LED Display
HRed
LYellow
NGreen
For incandescent or
non-lighted display
RRed
YYellow
GGreen
ZBlack
XX No lens
For LED Display
DR Red
DY Yellow
DG Green
For incandescent or
non-lighted display
LR Red
LY Yellow
LG Green
LW White
LK Black
Availability of options is subject to change without notice Honeywell Sensing and Control CP- 24
MML —‘> —IIJ _'>
Honeywell Sensing and Control AML/MML Selection Guide
MML24 Electronic control rocker switches**
MML24 LED, INCANDESCENT, OR NON-LIGHTED DISPLAY ORDER GUIDE
Example: MML24KA3AA01HDRXX
Electronic control rocker switch with black housing, printed wiring board terminals; one-pole, silver contacts; 2-position, maintained
action; one-circuit ON in each position; black rocker, red lens for LED display in Side 1 and no lens in Side 2.
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Housing Type
MML24K
Mounting
A
No bezel
(PWB mounting)
K
Black bezel/
mtg. clip/
long sides
A
Terminals
3
Printed
wiring board
2
Solder
3
MML24K
Black housing
Circuitry
AA
AC
BA
BC
AA
* Lighted switches with solder terminals require MML93R
receptacle to install lamps or LEDs.
CP-25 Honeywell Sensing and Control Availability of options is subject to change without notice
** NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing
—€I RX no!
Honeywell Sensing and Control AML/MML Selection Guide
Action
No
Charge
01
Lens
(Side 1)
XX None
LED Incand.
display: display:
DR Red LR Red
DY Yellow LY Yellow
DG Green LG Green
LW White
DRXX
Lens
(Side 2) Legend
20
with legend
A $6.00 recurring set
up charge per
legend. A one-time
charge of $70.00
applies to establish a
new graphic legend.
Leave this space blank,
if legend not desired
Rocker
B
Black rocker
H
Black rocker,
one lens*
F
White rocker,
one lens*
XX None
LED Incand.
display: display:
DR Red LR Red
DY Yellow LY Yellow
DG Green LG Green
LW White
H
* Lighted switches with solder terminals require MML93R receptacle to install
lamps or LEDs.
Availability of option is subject to change without notice Honeywell Sensing and Control CP-26
—Iw —‘:U
Honeywell Sensing and Control AML/MML Selection Guide
MML46 Indicators/flush mount**
MML46 LED OR INCANDESCENT DISPLAY ORDER GUIDE
Housing Type
MML46K
Mounting
Rectangular
A
No bezel
(PWB mounting)
K
Black bezel,
mtg. clip/
long sides
A
Mounting
Square
A
No bezel
(PWB mounting)
R
Black bezel,
mtg. clip/
long sides
MML46K
Rectangular
(1 or 2 LEDs or
incand. lamps)
Black housing
MML46H
Square
(1 LED or
incand. lamp)
Black housing
* LEDs are not permanently
installed in square housings
by Honeywell Sensing and
Control.
Support
Posts
3
PWB
2
Solder**
No charge
0
None
(for snap-in and
strip/matrix mount)
No charge
3
** Rectangular housings only
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Example:MML46KA3
Indicator housing, rectangular (black); no
bezel; support terminals
Example: MML46KA3RSXXDR20 )
As above, except furnished with red LED
and red lens, with legend
MML51 Button lenses/incandescent or non-lighted display**
MML51 ORDER GUIDE
Lens Type
MML51E
Display/Legend
Type
10
No legend
20
With Legend
A $6.00 recurring
set up charge per
legend. A one-time
charge of $70.00
applies to
establish a new
graphic legend.
20
Color
R
Red
Y
Yellow
G
Green
W
White
K
Black (opaque)
Rectangular
MML51E
Switch lens
MML51G*
Indicator lens
* Use MML51E with MML41
rectangular pushbutton style
indicators
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Five piece minimum order quantity for buttons
Example:
MML51E20R
Incandescent or non-lighted display switch lens; red
transmitted color, with legend. Unclassified.
** NOTE: Contact Customer Service for minimum quantity
required to establish or reinstate a catalog listing
R
CP-27 Honeywell Sensing and Control Availability of options is subject to change without notice
** NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing
assemble X B | MML 10
Honeywell Sensing and Control AML/MML Selection Guide
Lens
For LED display
DR Red
DY Yellow
DG Green
DR
Legend
20
with legend
A $6.00 recurring set
up charge per
legend. A one-time
charge of $70.00
applies to establish a
new graphic legend.
Leave this space blank,
if legend not desired
Available in rectangular housings
only
XX No LED
One LED* Two LEDs*
RSXX Red RSRS Red
YSXX Yellow YSYS Yellow
GSXX Green GSGS Green
* Permanently installed
For incandescent or
non-lighted display
LR Red
LY Yellow
LG Green
LW White
LK Black
RSXX
* When ordering incandescent or non-lighted display, LED field must be
XXXX.
Order MML46 display options assembled to indicator by adding codes below.
LED
(Stanley type)
Since square housings accept only
one LED, only a two-character LED
code is necessary.
For example:
MML46HR0XXDY or
MML46HR0RSDY
MML52 Button lenses/LED**
MML52 ORDER GUIDE
Lens Type
MML52G
Display/Legend
Type
Trans. Color
10
No legend
20
With Legend
A $6.00 recurring
set up charge per
legend. A one-time
charge of $70.00
applies to
establish a new
graphic legend.
10
Color/
Illumination
LED Display
R
Red
Y
Yellow
G
Green
C
Clear
Rectangular
MML52E
Switch lens
LED display
MML52G*
Indicator lens
* Use MML52E with MML41
rectangular pushbutton style
indicators
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Five piece minimum order quantity for buttons
Example:
MML52G10Y
LED display indicator lens; yellow transmitted color, no
legend. Unclassified.
** NOTE: Contact Customer Service for minimum quantity
required to establish or reinstate a catalog listing
Y
Availability of option is subject to change without notice Honeywell Sensing and Control CP- 28
20
Honeywell Sensing and Control AML/MML Selection Guide
MML72 Bezels/mounting clips*
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Ten piece minimum order quantity
Example:
MML72EEK
Black switch bezel, mounting clips on long sides.
* NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing
MML92 LEDs***
MML92 ORDER GUIDE
LEDs should be the same color as the lenses they illuminate. They are packed 10 per listing, including stand-off spacers for use when
solder terminating to a printed wiring board.
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Long lead: Anode (+), Short lead: Cathode (-).
* @ 25 mA.
** Also rectangular button lens, when used with MML93J solder terminal receptacle.
*** NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing
Forward LED
LED Use to Catalog LED Characteristics Manufacturers
Type Illuminate Listing Color Typ. @ 20mA Max. Part Numbers
T-1-3/4 Rectangular Stanley:
button lens MML92ERS Red 1.7V 2.0V ESBR5633
MML92EGS Green 2.1V 2.5V ESBG5633
MML92EYS Yellow 2.1V 2.5V ESAY5633
T-1 Square Stanley:
button lens and MML92HGS Green 2.1V 2.5V ESPY3901
MML24 rocker lens**
Hewlett Packard:
MML92HRH Red 2.2V* 3.0V HLMP-1340
MML92HGH Green 2.3V* 3.0V HLMP-1540
CP-29 Honeywell Sensing and Control Availability of options is subject to change without notice
Honeywell Sensing and Control AML/MML Selection Guide
MML93 LED/Incandescent lamp receptacles*
MML93 RECEPTACLE ORDER GUIDE
These receptacles do not include LEDs or lamps.
Discount BE
Schedule Qty.: 25 pieces/listing
Unclass.
Receptacle Type Catalog Listing Mates With Use to Illuminate
Printed Wiring MML93K T-1 3/4 LED Rectangular button lens or umbrella button lens
Board MML93G T-1 LED or bi-pin lamp Square button lens or MML24 rocker lens
Solder Terminal MML93J T-1 LED or bi-pin lamp Rectangular button lens
Solder MML93L T-1 LED or unbased T-1 lamp Square button lens
MML93R T-1 LED or unbased T-1 lamp MML24 rocker lens
* NOTE: Contact Customer Service for minimum quantity required to establish or reinstate a catalog listing
Availability of option is subject to change without notice Honeywell Sensing and Control CP-30

Products related to this Datasheet

SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSHBUTTON HALL EFFECT
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSHBUTTON HALL EFFECT
Available Quantity: 0
Unit Price: 0
SWITCH PUSHBUTTON HALL EFFECT
Available Quantity: 0
Unit Price: 0
SWITCH PUSHBUTTON HALL EFFECT
Available Quantity: 0
Unit Price: 0
SWITCH PUSHBUTTON HALL EFFECT
Available Quantity: 0
Unit Price: 0
SWITCH PUSHBUTTON HALL EFFECT
Available Quantity: 0
Unit Price: 0
SWITCH PUSH HALL EFFECT 0.4V
Available Quantity: 0
Unit Price: 0
SWITCH PUSHBUTTON HALL EFFECT
Available Quantity: 0
Unit Price: 0
SWITCH PUSHBUTTON HALL EFFECT
Available Quantity: 0
Unit Price: 0