GP2Y0A41SK0F Datasheet by DFRobot

View All Related Products | Download PDF Datasheet
SHARP lDescription lAgency approvals/Compliance (2011/55/50) lApplications lFeatures M cc “1‘ am- 5 mm: m d'zngc wrlu ~ Dnm haunt t ufm'm‘nu'm'v by at» c mm m, SHARP n nm-mmmm 72» v um;- um. Drum: mg 31“] 2mm duwccsshom 1:311:25, daubcakamt: and SHARP woruc'taabta helmcucm ccspccxfiutnr arms hc'orc umz m SHARP dcvlcc In the m 5th Nu nmuuxw
Sheet No.: OP
GP2Y0A41SK0F is a distance measuring sensor unit,
composed of an integrated combination of PSD
(position sensitive detector) , IR-LED (infrared
emitting diode) and signal processing circuit.
The variety of the reflectivity of the object, the
environmental temperature and the operating duration
are not influenced easily to the distance detection
because of adopting the triangulation method.
This device outputs the voltage corresponding to the
detection distance. So this sensor can also be used as a
proximity sensor.
1. Distance measuring sensor is united with PSD,
infrared LED and signal processing circuit
2. Short measuring cycle (16.5ms)
3. Distance measuring range : 4 to 30 cm
4. Package size (29.5 × 13.0 × 13.5mm)
5. Analog output type
1. Compliant with RoHS directive (2002/95/EC)
1. Cleaning robot
2. Personal robot
3. Sanitary
Distance Measuring Sensor Unit
Measuring distance : 4 to 30 cm
Analog output type
SHARP (Smmp) 37 Li m am‘iflzr g 29.5 xi9.7:u.1 . “1’4 0/9 5’ e sung (an-.1.) flAAlSK :l —5 Mndli nan» 1: mm». (i in 9. x. v. 1) Van: (200.5:5) Li nideieeior 543 Lens case 2 Sigmlnnml Connedor: o y. ShengianTecnnaiagy <20qu (jctc)="" g="" m="" 12001wwsp-hf="" v”="" note="" 1:="" the="" dimensions="" marked="" x="" are="" described="" the="" dimensions="" ai="" iens="" center="" position.="" note="" 2:="" unspecified="" tolerance="" snali="" be="" 10.3mm.="" male="" 3:="" the="" dimensions="" in="" pareninesis="" are="" shown="" for="" reference.="" e,="" m="" 4"="" “6="" 3‘75="" connector="" pwb="" 7.5="" 415="" ‘55="" .="" .="" e="" in.="" “2="" mac»="" t="" '3="" n="" ,—="" ij="" u="" u="" fir="" connector="" signai="" mateyiais="" lens;="" acrylic="" acid="" resin="" (wsibie="" m="" cube"="" resin)="" case:="" carbonic="" abs="" (conducmve="" msin)="" pcb:="" paper="" pnenoi="" unii:="" mm="" scaie:="" 2/1="" gpzyomi="" skof="" name="" outiine="" dimensions="" 32"”="" cyi="" 3036j02a="" sum="" nu="" ommixw="">
Sheet No.: OP1300
processing circuit
Measuring distance IC
LED drive circuit Output circuit
Oscillation circuit
Voltage regulator
(LED Current : TYP111mA)
SHARP I6 Sum} 7m» éé Ummhlu mupul Fxm umpm X X $3 —> sum Nu omuuxw
Sheet No.: OP1300
Absolute maximum ratings
(Ta=25°C, Vcc=5V)
Parameter Symbol Ratings Unit Remark
Supply voltage Vcc -0.3 to +7 V -
Output terminal voltage
0.3 to Vcc+0.3
Operating temperature
10 to +60
Storage temperature
40 to +70
Operating supply voltage
Symbol Rating Unit Remark
Vcc 4.5 to 5.5 V -
Electro-optical Characteristics
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Measuring distance range (Note 1) 4 - 30 Cm
Output terminal voltage Vo L=30cm (Note 1) 0.25 0.4 0.55 V
Output voltage difference Output change at L change
(30 4cm) (Note 1) 1.95 2.25 2.55 V
Average supply current Icc L=30cm (Note 1) - 12 22 mA
L : Distance to reflective object
(Note 1) Using reflective object : White paper
(Made by Kodak Co., Ltd. gray cards R-27 white face, reflective ratio ; 90%)
Timing Chart
MAX 5.0ms
Unstable output
First output
Second output nth
First measurement Second
Vcc (Power supply)
Distance measuring operating
Vo (Output)
SHARP ] #97 Whitepapar \Renccnancerauosow -<><- --="" gray="" paper="" (reflectance="" ratio="" 13%]="" i="" 32-="" :="" ‘="" ‘="" \="" ‘="" 1="" \="" ‘="" \="" 1="" w="" ‘="" w="" ‘="" ‘="" ‘="" 1="" 3="" l=""> 1 ‘ 25 gr ,_ , 77* , 77 ,7 26 24 / 18 1.4 Analog voltage output M 2 ‘ \ 1,2 DB 0,6 04 Distance to reflective object [cm) Sim Nu ommnxm
Sheet No.: OP1300
Example of output distance characteristics
SHARP 1 + White paper [Reflectance ram 90%} - . x- ‘ - Gmy paper [Reflectance ram 15%) J 3,2 1 J i 2.8 7 2.4 ‘ 5°] 2.2 LE , f7 m 1.5 8cm ‘ H, mm Analog voltage output [V] X 1.2 ‘ z Ham \ 205m 0 a ’ u S 1 1 1 0 ans m mi 02 025 03 035 04 0'45 Inverse number of distance 1/(L+O.42] [l/cm] sum Nu ommnxw
Sheet No.: OP1300
Example of output distance characteristics with the inverse of distance
SHARP ti\'e(2011/65/EU) ti\'e(201 l/éS/EU). , cadmium, hexavalent chromium, polybmminated biphenyls (PBB) and polybmmi ted diphenyl ethers (PBDE) 2) Content ofsix , Ihstanccs specified in Management Methods for Control of Pollution Caused by Electronic [ntormation Products Regulation (Chinese : $35155? r'r‘lri? QéiEfi‘ill‘FTI‘il flit). Hazardous substances Categgry Lead M ereury Cadmium Hexavalent Polybrominated Polybroi-mnated (Pb) (Hg) (Cd) Chromium bmhenyls diphenyl ethers (CY > (PBB) (PBDE) Distance Measuitng / ./ J J / Sensor This table is prepared in accordance with the provisions of SJ/T 11364. / : Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572 >l< :="" indicates="" that="" said="" hazardous="" substance="" contained="" in="" at="" least="" one="" of="" the="" homogeneous="" materials="" used="" for="" this="" part="" is="" above="" the="" limit="" requirement="" ofgb/t="" 26572="" lead="" in="" glass="" ofeleetronie="" components="" (designated="" by="" "="" *="" "="" in="" the="" above="" table)="" are="" exempt="" from="" the="" roiis="" directive="" (2011/65/eu),="" because="" there="" is="" no="" efl'eetive="" way="" to="" eliminate="" or="" substitute="" them="" by="" present="" scientific="" technology.="">
Sheet No.: OP1300
This product shall not contain the following materials.
Also, the following materials shall not be used in the production process for this product.
Materials for ODS : CFCS, Halon, Carbon tetrachloride 1.1.1-Trichloroethane (Methyl chloroform)
Product mass : Approx. 3.6g (TYP)
This product does not contain the chemical materials regulated by RoHS directive.
(Except for the NOT regulated by RoHS directive.)
Compliance with each regulation
1) The RoHS directive(2002/95/EC)
This product complies with the RoHS directive(2002/95/EC) .
Object substances: mercury, lead (except for lead in high melting temperature type solders*1 and glass of
electronic components), cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated
diphenyl ethers (PBDE)
*1 i.e. tin-lead solder alloys containing more than 85% lead
2) Content of six substances specified in Management Methods for Control of Pollution Caused by Electronic
Information Products Regulation (Chinese : ).
Toxic and hazardous substances
diphenyl ethers
Distance Measuring
: indicates that the content of the toxic and hazardous substance in all the homogeneous materials of the part is
below the concentration limit requirement as described in SJ/T 11363-2006 standard .
: indicates that the content of the toxic and hazardous substance in at least one homogeneous material of the
part exceeds the concentration limit requirement as described in SJ/T 11363-2006 standard.
Lead in high melting temperature type solders (i.e. tin-lead solder alloys containing more than 85% lead) and
glass of electronic components are exempt from the RoHS directive
(2002/95/EC), because there is no effective way to eliminate or substitute them by present scientific technology.
SHARP Hing win U] ~®2B\ nPlcasc don’t do washing. Washing may dctcriuratc thc chalactclistics ufoptiwl s sum Nu omuuxw
Sheet No.: OP1300
[Advice for the optics]
Lens of this device shall be kept cleanly. There are cases that dust, water or oil and so on deteriorate the
characteristics of this device. Please consider in actual application.
In case that protection is set in front of the emitter and detector portion, the protection cover which has the most
efficient transmittance at the emitting wavelength range of LED for this product ( =870nm±70nm), shall be
recommended to use. The face and back of protection cover should be mirror polishing. Also, as there are cases
that the characteristics may not be satisfied with according to the distance between the protection cover and this
product or the thickness of the protection cover, please use this product after confirming the operation sufficiently
in actual application.
[Advice for the characteristics]
In case that there is an object near to light exits of the sensor between the sensor and the detected object, please use
this device after confirming sufficiently what the characteristics of this sensor do not change by the object.
When the detector surface receive direct light from the sun, tungsten lamp and so on, there are cases that it can not
measure the distance exactly. Please consider the design that the detector does not receive direct light from such
light source.
Distance between sensor and mirror reflector can not sometimes measure exactly.
In case of changing the mounting angle of this product, it may measure the distance exactly.
In case that reflective object has boundary line clearly, there is cases that distance can not measure exactly.
At that time, if direction of boundary line and the line between emitter center and detector center parallels,
it is possible to decrease deviation of measuring distance.
(Incorrect) (Correct)
In order to decrease measuring error by moving direction of object, we recommend to mount the sensor like
below drawing.
(Incorrect) (Correct)
(Moving direction) (Moving direction)
In order to stabilize power supply line, we recommend to connect a by-pass capacitor of 10 F or more between
Vcc and GND near this product.
[Notes on handling]
ystem and so on.
Please confirm resistance to chemicals under the actual usage since this product has not been designed against for
There are some possibilities that the sensor inside the case package with lens may be exposed to the excessive
mechanical stress. Please be careful not to cause any excessive pressure on the case package with lens and also on the
PCB at the assembly and inserting of the set.
SHARP sum Nu ommnxw
Sheet No.: OP1300
Packing specification
1. Packing numbers
MAX. 100 pieces per tray
MAX 1000 pieces per case
2. Arranges in 10 stages of trays containing products into the packing case.
Put pads on their top and bottom.
Closes the lid of case and seals with kraft tape.
3. Indication items
The contents of the carton indication conforms to EIAJ C-3 and the following items are indicated.
Model No., Internal production control name, Quantity, Packing date, Corporate name, Country of origin
Kraft tape
Packing case
Tray containing products
(10 sheets /case)
(2 sheets/case : top and bottom)
SHARP ‘lum Nu omuuxw
Sheet No.: OP1300
Important Notices
· The circuit application examples in this publication are provided
to explain representative applications of SHARP devices and are
not intended to guarantee any circuit design or license any
intellectual property rights. SHARP takes no responsibility for
any problems related to any intellectual property right of a third
party resulting from the use of SHARP's devices.
· Contact SHARP in order to obtain the latest device specification
sheets before using any SHARP device. SHARP reserves the
right to make changes in the specifications, characteristics, data,
materials, structure, and other contents described herein at any
time without notice in order to improve design or reliability.
Manufacturing locations are also subject to change without
· Observe the following points when using any devices in this
publication. SHARP takes no responsibility for damage caused
by improper use of the devices which does not meet the
conditions and absolute maximum ratings to be used specified in
the relevant specification sheet nor meet the following
(i) The devices in this publication are designed for use in general
electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii) Measures such as fail-safe function and redundant design
should be taken to ensure reliability and safety when SHARP
devices are used for or in connection
with equipment that requires higher reliability such as:
--- Transportation control and safety equipment (i.e.,
aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii) SHARP devices shall not be used for or in connection with
equipment that requires an extremely high level of reliability and
safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g.,
· If the SHARP devices listed in this publication fall within the
scope of strategic products described in the Foreign Exchange
and Foreign Trade Law of Japan, it is necessary to obtain
approval to export such SHARP devices.
· This publication is the proprietary product of SHARP and is
copyrighted, with all rights reserved. Under the copyright laws,
no part of this publication may be reproduced or transmitted in
any form or by any means, electronic or mechanical, for any
purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also
required before any use of this publication may be made by a
third party.
· Contact and consult with a SHARP representative if there are
any questions about the contents of this publication.

Products related to this Datasheet

Available Quantity: 27
Unit Price: 13.76