ESD131-B1-W0201 Datasheet by Infineon Technologies

RoHS / @9
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
Product description
This Infineon ESD (electrostatic discharge) protection device has a bi-directional and symmetric
I/V characteristic and excellent clamping performance.
Feature list
ESD / transient protection according to:
- IEC61000-4-2 (ESD): ±20 kV (air) / ±20 kV (contact)
- IEC61000-4-4 (EFT): ±2.5 kV / ±50 A (5/50 ns)
- IEC61000-4-5 (Surge): ±3.5 A (8/20 μs)
Bi-directional maximum working voltage: VWM = ±5.5 V
Line capacitance: CL = 0.23 pF at f = 1 MHz
Clamping voltage: Vcl = 13.8 V at ITLP = 16 A with Rdyn = 0.66 Ω
Very low leakage current: IL =1 nA
Small form factor SMD size 0201, low profile (0.58 x 0.28 x 0.15 mm³)
Potential applications
Super high speed interfaces
RF antenna
Product validation
Qualified for industrial applications according to the relevant tests of JEDEC47/20/22.
Device information
T
T
Figure 1 Pin configuration with marking (bottom view)
Table 1 Part information
Product name / Ordering code Package Pin configuration Marking Pieces / Reel
ESD131-B1-W0201 /ESD131B1W0201E6327XTSA1 WLL-2-3 1 line, bi-directional T 15 k
Datasheet Please read the Important Notice and Warnings at the end of this document v2.0
www.infineon.com 2020-09-25
®
Table of contents
Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Feature list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Device information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 Typical characteristic diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 Package information WLL-2-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
Table of contents
Datasheet 2 v2.0
2020-09-25
®
1 Absolute maximum ratings
Table 2 Absolute maximum ratings at TA = 25°C, unless otherwise specified
Parameter Symbol Values Unit Note or test condition
Min. Max.
Working voltage VWM -5.5 +5.5 V
ESD discharge voltage VESD (contact) -20 +20 kV Discharge network:
R = 330 Ω, C = 150 pF 1)
VESD (air) -20 +20
Peak pulse power PPK 24 W Stress pulse:
8/20 μs current waveform 2)
Peak pulse current IPP -3.5 +3.5 A
Operating temperature Top -55 +125 °C
Storage temperature Tstg -65 +150
Attention:Stresses above the maximum values listed here may cause permanent damage to the device.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability. Maximum ratings are absolute ratings. Exceeding only one of these values may cause
irreversible damage to the component.
1Based on IEC61000-4-2.
2Based on IEC61000-4-5.
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
1 Absolute maximum ratings
Datasheet 3 v2.0
2020-09-25
®
2 Electrical characteristics
Note: TA = 25°C, unless otherwise specified. Device is electrically symmetrical.
I
V
or
ITLP
IPP
It
IL
ΔI
ΔV
VWM
Vtr Vcl IL
It
or
ITLP
IPP
VWM Vtr
Vcl
Vh
Vh
Ih
Vbr
Ih
Vbr
I
Rdyn =
ΔV
ΔI
Figure 2 I/V characteristic curve
Table 3 I/V characteristic parameters
Symbol Parameter
IhHolding current
ILLeakage current
IPP Peak pulse current, based on IEC61000-4-5
ItTest current
ITLP TLP current
Rdyn Dynamic resistance
Vbr Breakdown voltage
Vcl Clamping voltage
VhHolding voltage
VtTest voltage
Vtr Trigger voltage
VWM Maximum working voltage
Note: For more detailed explanation of electrical parameters refer to [1]
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
2 Electrical characteristics
Datasheet 4 v2.0
2020-09-25
®
Table 4 DC characteristics
Parameter Symbol Values Unit Note or test condition
Min. Typ. Max.
Breakdown voltage Vbr 6 8 10.5 V It = 1 mA
Holding voltage Vh 1.9 – I = Ih
Holding current Ih– 25 – mA V = Vh
Leakage current IL 1 100 nA VWM = 5.5 V
Table 5 AC characteristics
Parameter Symbol Values Unit Note or test condition
Min. Typ. Max.
Line capacitance CL 0.23 0.35 pF V = 0 V, f = 1 MHz
0.20 – V = 0 V, f = 2.5 GHz
Series inductance LS <0.1 nH Extracted from S-parameters
Table 6 Protection characteristics
Parameter Symbol Values Unit Note or test condition
Min. Typ. Max.
Clamping voltage (TLP) 3) 4) Vcl – 6 – V ITLP = 4 A
8.7 – ITLP = 8 A
13.8 – ITLP = 16 A
24.3 – ITLP = 30 A
Clamping voltage (8/20 µs) 5) 3.3 – IPP = 1 A
5.7 – IPP = 3 A
Dynamic resistance 3) Rdyn 0.66
3TLP parameters: Z0 = 50 Ω, tp = 100 ns, tr = 0.6 ns, averaging window 30-60 ns.
4Refer to application note AN210 [2]
5tp = 8/20 µs. Stress pulse based on IEC61000-4-5.
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
2 Electrical characteristics
Datasheet 5 v2.0
2020-09-25
® < \\="" 0="" \a/v="" 0.5="" u.="" cl="" 0="" 1="" mhz="" 2="" -1="" 0="" v./v="">
3 Typical characteristic diagrams
Note: TA = 25 °C, unless otherwise specified.
10-12
10-11
10-10
10-9
10-8
10-7
10-6
-5 -4 -3 -2 -1 0 1 2 3 4 5
IL / A
Vt / V
Figure 3 Leakage current: IL = f(Vt)
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
-5 -4 -3 -2 -1 0 1 2 3 4 5
CL / pF
Vt / V
1 MHz
Figure 4 Line capacitance: CL = f(Vt), f = 1 MHz
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
3 Typical characteristic diagrams
Datasheet 6 v2.0
2020-09-25
® /
-20
-10
0
10
20
30
40
50
60
70
80
90
100
110
120
-50 0 50 100 150 200 250 300 350 400 450
tp / ns
Vcl / V
Scope: 6 GHz, 20 GS/s
Vcl-30ns = 14 V
Vcl-peak = 118 V
Figure 5 Clamping voltage (ESD): Vcl = f(tp), 8 kV positive pulse based on IEC61000-4-2
-120
-110
-100
-90
-80
-70
-60
-50
-40
-30
-20
-10
0
10
20
-50 0 50 100 150 200 250 300 350 400 450
tp / ns
Vcl / V
Scope: 6 GHz, 20 GS/s
Vcl-30ns = -14 V
Vcl-peak = -118 V
Figure 6 Clamping voltage (ESD): Vcl = f(tp), 8 kV negative pulse based on IEC61000-4-2
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
3 Typical characteristic diagrams
Datasheet 7 v2.0
2020-09-25
®
-20
0
20
40
60
80
100
120
140
-50 0 50 100 150 200 250 300 350 400 450
tp / ns
Vcl / V
Scope: 6 GHz, 20 GS/s
Vcl-30ns = 21 V
Vcl-peak = 147 V
Figure 7 Clamping voltage (ESD): Vcl = f(tp), 15 kV positive pulse based on IEC61000-4-2
-140
-120
-100
-80
-60
-40
-20
0
20
-50 0
Vcl / V
50 100 150 200 250 300 350 400 450
tp / ns
Scope: 6 GHz, 20 GS/s
Vcl-30ns = -22 V
Vcl-peak = -148 V
Figure 8 Clamping voltage (ESD): Vcl = f(tp), 15 kV negative pulse based on IEC61000-4-2
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
3 Typical characteristic diagrams
Datasheet 8 v2.0
2020-09-25
®
-40
-30
-20
-10
0
10
20
30
40
ITLP / A
-30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30
Vcl / V
ESD131-B1-W0201
Rdyn
Rdyn = 0.66
Rdyn = 0.66
Figure 9 Clamping voltage (TLP): ITLP = f(Vcl)
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
3 Typical characteristic diagrams
Datasheet 9 v2.0
2020-09-25
®
-4
-3.5
-3
-2.5
-2
-1.5
-1
-0.5
0
0.5
1
1.5
2
2.5
3
3.5
4
-10 -8 -6 -4 -2 0 2 4 6 8 10
IPP / A
Vcl / V
Figure 10 Clamping voltage (Surge): IPP = f(Vcl), based on IEC61000-4-5
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
3 Typical characteristic diagrams
Datasheet 10 v2.0
2020-09-25
® IL/dB \ f/GHZ
Figure 11 Insertion loss IL = f(f), measured in a 50 Ω system
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
3 Typical characteristic diagrams
Datasheet 11 v2.0
2020-09-25
infineon Bottom View 0.28m 03 1) 0 15:0 01 0.24:0 02 2x | . ‘3 x . - I‘ N I 1 .—_ o Pad locations 0:: a - - . — — — - — — m o m V 0' i ' 2 “The toiai package height includes the pad thickness Ail dimensions are in units mm The drawing is in compliance with ISO 128-30, Projection Method 1 [-E-Q]
4 Package information WLL-2-3
Figure 12 WLL-2-3 package
Note: For package information including footprint, packing and assembly recommendation refer to:
https://www.infineon.com/packages/SG-WLL-2-3/
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
4 Package information WLL-2-3
Datasheet 12 v2.0
2020-09-25
®
5 References
[1] Infineon AG - Understanding ESD protection device characteristics
[2] Infineon AG - Application note AN210: Effective ESD Protection Design at System Level Using VF-TLP
Characterization Methodology
6 Revision history
v0.9 2016-04-21 First release
v1.0 2017-03-22 Electrical characteristics values updated
Added additional typical characteristic diagrams
v2.0 2020-09-25 New datasheet layout and values updated
ESD131-B1-W0201
Bi-directional ESD protection device, 5.5 V, 0.23 pF, 0201
5 References
Datasheet 13 v2.0
2020-09-25
Trademarks
All referenced product or service names and trademarks are the property of their respective owners.
Edition 2020-09-25
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2020 Infineon Technologies AG
All Rights Reserved.
Do you have a question about any
aspect of this document?
Email: erratum@infineon.com
Document reference
IFX-vbq1594814758022
IMPORTANT NOTICE
The information given in this document shall in no
event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”) .
With respect to any examples, hints or any typical
values stated herein and/or any information regarding
the application of the product, Infineon Technologies
hereby disclaims any and all warranties and liabilities
of any kind, including without limitation warranties of
non-infringement of intellectual property rights of any
third party.
In addition, any information given in this document is
subject to customer’s compliance with its obligations
stated in this document and any applicable legal
requirements, norms and standards concerning
customer’s products and any use of the product of
Infineon Technologies in customer’s applications.
The data contained in this document is exclusively
intended for technically trained staff. It is the
responsibility of customer’s technical departments to
evaluate the suitability of the product for the intended
application and the completeness of the product
information given in this document with respect to such
application.
WARNINGS
Due to technical requirements products may contain
dangerous substances. For information on the types
in question please contact your nearest Infineon
Technologies office.
Except as otherwise explicitly approved by Infineon
Technologies in a written document signed by
authorized representatives of Infineon Technologies,
Infineon Technologies’ products may not be used in
any applications where a failure of the product or
any consequences of the use thereof can reasonably
be expected to result in personal injury.