LQW15ANyyyy8ZD Series Spec Datasheet by Murata Electronics

View All Related Products | Download PDF Datasheet
SQecNo.JELF243A79135BrO1 LQW15AN1N3CSZD LQW15AN1N3DSZD LQW15AN1N5CSZD LQW15AN1N5DSZD LQW15AN1N6CSZD LQW15AN1N6DSZD LQW15AN1N7CSZD LQW15AN1N7DSZD LQW15AN2N2BBZD LQW15AN2N2CSZD LQW15AN2N2DSZD LQW15AN2NZGBZD LQW15AN2N3BBZD LQW15AN2N3CSZD LQW15AN2N3DSZD LQW15AN2N3682D LQW15AN2N4BBZD LQW15AN2N4CSZD LQW15AN2N4DSZD LQW15AN2NAGBZD LQW15AN2N5BBZD LQW15AN2N5CSZD LQW15AN2N5DSZD LQW15AN2NSGBZD LQW15AN2N6BBZD LQW15AN2N6CSZD LQW15AN2N6DSZD LQW15AN2NGGBZD LQW15AN2N7BBZD LQW15AN2N7CSZD LQW15AN2N7DSZD LQW15AN2N7GBZD LQW15AN2N8BBZD LQW15AN2N8CSZD LQW15AN2N8DSZD LQW15AN2NSGBZD LQW15AN2N9BBZD LQW15AN2N9CSZD LQW15AN2N9DSZD LQW15AN2NQGBZD
SpecNo.JELF243A-9138B-01 P.1/14
MURATA MFG.CO.,LTD
Reference Only
CHIP COIL (CHIP INDUCTORS) LQW15AN□□□□8ZD
Murata Standard Reference Specification AEC-Q200
1. Scope
This reference specification applies to LQW15AN_8ZD series, Chip coil (Chip Inductors) for automotive Electronics
based on AEC-Q200 except for Power train and Safety.
2. Part Numbering
(ex) LQ W 15 A N 1N3 C 8 Z D
Product ID Structure Dimension Applications Category Inductance Tolerance Features Application Packaging
(L×W) and Z:Automotive D:Taping
Characteristics
3. Rating
Operating Temperature Range –55°C ~ +125°C
Storage Temperature Range. –55°C ~ +125°C
Customer
Part Number
MURATA
Part Number
Inductance Q
(min.)
DC
Resistance
( max.)
Self
Resonant
Frequency
(GHz min.)
Rated
Current
(mA)
ESD
Rank
6:25kV
(nH) Tolerance
LQW15AN1N3C8ZD 1.3
C:±0.2nH
D:±0.5nH 20
0.012
18.0
3150
6
LQW15AN1N3D8ZD
LQW15AN1N5C8ZD 1.5 0.028 2100
LQW15AN1N5D8ZD
LQW15AN1N6C8ZD 1.6 0.045 1450
LQW15AN1N6D8ZD
LQW15AN1N7C8ZD 1.7 0.065 1150
LQW15AN1N7D8ZD
LQW15AN2N2B8ZD
2.2
B:±0.1nH
C:±0.2nH
D:±0.5nH
G:±2%
30
0.022
15.5
2530
LQW15AN2N2C8ZD
LQW15AN2N2D8ZD
LQW15AN2N2G8ZD
LQW15AN2N3B8ZD
2.3
LQW15AN2N3C8ZD
LQW15AN2N3D8ZD
LQW15AN2N3G8ZD
LQW15AN2N4B8ZD
2.4
LQW15AN2N4C8ZD
LQW15AN2N4D8ZD
LQW15AN2N4G8ZD
LQW15AN2N5B8ZD
2.5 0.030 2100
LQW15AN2N5C8ZD
LQW15AN2N5D8ZD
LQW15AN2N5G8ZD
LQW15AN2N6B8ZD
2.6 0.035 14.5 1950
LQW15AN2N6C8ZD
LQW15AN2N6D8ZD
LQW15AN2N6G8ZD
LQW15AN2N7B8ZD
2.7 28
0.047
14.0
1500
LQW15AN2N7C8ZD
LQW15AN2N7D8ZD
LQW15AN2N7G8ZD
LQW15AN2N8B8ZD
2.8 27 13.5
LQW15AN2N8C8ZD
LQW15AN2N8D8ZD
LQW15AN2N8G8ZD
LQW15AN2N9B8ZD
2.9 25 12.5
LQW15AN2N9C8ZD
LQW15AN2N9D8ZD
LQW15AN2N9G8ZD
SQecNo.JELF243A79135BVO1 LQW15AN3NOBBZD LQW15AN3NOCSZD LQW15AN3NODSZD LQW15AN3NOGBZD LQW15AN3N3BBZD LQW15A_N3N3CSZD LQW15AN3N3DSZD LQW15AN3N3682D LQW15A_N3N4B8_ZD LQW15AN3N4CSZD LQW15AN3N4DSZD LQW15AN3NAGBZD LQW15AN3NSBBZD LQW15AN3N5CSZD LQW15AN3N5DSZD LQW15AN3NSGBZD LQW15AN3N6BBZD LQW15AN3N6CSZD LQW15AN3N6DSZD LQW15AN3NGGBZD LQW15AN3N7BBZD LQW15AN3N7CSZD LQW15AN3N7DE§ZD LQW15AN3N7GBZD LQW15AN3N8BBZD LQW15AN3N8CSZD LQW15AN3N8DSZD LQW15AN3NSGBZD LQW15AN3N9BBZD LQW15AN3N9CSZD LQW15AN3N9DSZD LQW15AN3NQGBZD LQW15AN4NOBBZD LQW15AN4NOC82D LQW15AN4NOD82D LQW15AN4NOGBZD LQW15AN4N1BBZD LQW15AN4N1CSZD LQW15AN4N1DE§ZD LQW15AN4N1GBZD LQW15AN4N2BBZD LQW15AN4N2CSZD LQW15AN4N2D82D LQW15AN4NZGBZD LQW15AN4N3BBZD LQW15AN4N3C82D LQW15AN4N3D82D LQW15AN4NaGBZD LQW15AN4N4BBZD LQW15AN4N4CSZD LQW15AN4N4DSZD LQW15AN4NAGBZD LQW15ANANSBBZD LQW15A_N4N5C8_ZD LQW15AN4N5DSZD LQW15AN4NSGBZD
SpecNo.JELF243A-9138B-01 P.2/14
MURATA MFG.CO.,LTD
Reference Only
Customer
Part Number
MURATA
Part Number
Inductance Q
(min.)
DC
Resistance
( max.)
Self
Resonant
Frequency
(GHz min.)
Rated
Current
(mA)
ESD
Rank
6:25kV
(nH) Tolerance
LQW15AN3N0B8ZD
3.0
B:±0.1nH
C:±0.2nH
D:±0.5nH
G:±2%
20 0.063 12.5 1350
6
LQW15AN3N0C8ZD
LQW15AN3N0D8ZD
LQW15AN3N0G8ZD
LQW15AN3N3B8ZD
3.3
30 0.030
14.0 2000
LQW15AN3N3C8ZD
LQW15AN3N3D8ZD
LQW15AN3N3G8ZD
LQW15AN3N4B8ZD
3.4
10.0 1950
LQW15AN3N4C8ZD
LQW15AN3N4D8ZD
LQW15AN3N4G8ZD
LQW15AN3N5B8ZD
3.5
LQW15AN3N5C8ZD
LQW15AN3N5D8ZD
LQW15AN3N5G8ZD
LQW15AN3N6B8ZD
3.6
LQW15AN3N6C8ZD
LQW15AN3N6D8ZD
LQW15AN3N6G8ZD
LQW15AN3N7B8ZD
3.7
35
0.030 10.0 1950
LQW15AN3N7C8ZD
LQW15AN3N7D8ZD
LQW15AN3N7G8ZD
LQW15AN3N8B8ZD
3.8
LQW15AN3N8C8ZD
LQW15AN3N8D8ZD
LQW15AN3N8G8ZD
LQW15AN3N9B8ZD
3.9
LQW15AN3N9C8ZD
LQW15AN3N9D8ZD
LQW15AN3N9G8ZD
LQW15AN4N0B8ZD
4.0
30
LQW15AN4N0C8ZD
LQW15AN4N0D8ZD
LQW15AN4N0G8ZD
LQW15AN4N1B8ZD
4.1
0.044
9.6
1800
LQW15AN4N1C8ZD
LQW15AN4N1D8ZD
LQW15AN4N1G8ZD
LQW15AN4N2B8ZD
4.2
LQW15AN4N2C8ZD
LQW15AN4N2D8ZD
LQW15AN4N2G8ZD
LQW15AN4N3B8ZD
4.3 32
LQW15AN4N3C8ZD
LQW15AN4N3D8ZD
LQW15AN4N3G8ZD
LQW15AN4N4B8ZD
4.4
34
0.052 1600
LQW15AN4N4C8ZD
LQW15AN4N4D8ZD
LQW15AN4N4G8ZD
LQW15AN4N5B8ZD
4.5 0.060 1450
LQW15AN4N5C8ZD
LQW15AN4N5D8ZD
LQW15AN4N5G8ZD
SQecNo.JELF243A79135BrO1 LQW15AN4N6BSZD LQW15AN4N6082D LQW15AN4N6D82D LQW15AN4NGGBZD LQW15AN4N7BBZD LQW15AN4N7082D LQW15AN4N7D82D LQW15AN4N7GBZD LQW15AN4NEBBZD LQW15AN4NBCEZD LQW15AN4N5D82D LQW15AN4NBGBZD LQW15AN4NSBBZD LQW15AN4N9082D |__QW1_5AN4N9_D82D LQW15AN4NQGBZD LQW15AN5NOBSZD LQW15AN5NOCEZD LQW15AN5NOD82D LQW15AN5NOGBZD LQW15AN5N1BBZD LQW15AN5N1CEZD LQW15AN5N1D82D LQW15AN5N1GBZD LQW15AN5NZBBZD LQW15AN5NZCEZD LQW15AN5N2D82D LQW15AN5NzGBZD LQW15AN5NSBBZD LQW15AN5N3082D LQW15AN5N3D82D 'LQW1'5AN5N3'GBZD LQW15AN5N4BSZD LQW15AN5NACEZD LQW15AN5N4D82D LQW15AN5N4GBZD LQW15AN5NSBSZD LQW15AN5NSCEZD LQW15AN5N5D82D LQW15AN5NSGBZD LQW15AN5NGBBZD LQW15AN5N6082D LQW15AN5N6D82D LQW15AN5NGGBZD LQW15AN5N7BBZD LQW15AN5N7082D |__QW1_5AN5N7_D82D LQW15AN5N7GBZD LQW15AN5NEBBZD LQW15AN5NBCEZD LQW15AN5N5D82D LQW15AN5NBGBZD LQW15AN5NSBBZD LQW15AN5N9082D LQW15AN5N9D82D LQW15AN5NQGBZD
SpecNo.JELF243A-9138B-01 P.3/14
MURATA MFG.CO.,LTD
Reference Only
Customer
Part Number
MURATA
Part Number
Inductance Q
(min.)
DC
Resistance
( max.)
Self
Resonant
Frequency
(GHz min.)
Rated
Current
(mA)
ESD
Rank
6:25kV
(nH) Tolerance
LQW15AN4N6B8ZD
4.6
B:±0.1nH
C:±0.2nH
D:±0.5nH
G:±2%
32 0.060 9.6 1450
6
LQW15AN4N6C8ZD
LQW15AN4N6D8ZD
LQW15AN4N6G8ZD
LQW15AN4N7B8ZD
4.7 31
0.071 8.0 1200
LQW15AN4N7C8ZD
LQW15AN4N7D8ZD
LQW15AN4N7G8ZD
LQW15AN4N8B8ZD
4.8 30
LQW15AN4N8C8ZD
LQW15AN4N8D8ZD
LQW15AN4N8G8ZD
LQW15AN4N9B8ZD
4.9 27
LQW15AN4N9C8ZD
LQW15AN4N9D8ZD
LQW15AN4N9G8ZD
LQW15AN5N0B8ZD
5.0 32
0.040
10.0
1770
LQW15AN5N0C8ZD
LQW15AN5N0D8ZD
LQW15AN5N0G8ZD
LQW15AN5N1B8ZD
5.1
35
8.0
LQW15AN5N1C8ZD
LQW15AN5N1D8ZD
LQW15AN5N1G8ZD
LQW15AN5N2B8ZD
5.2
LQW15AN5N2C8ZD
LQW15AN5N2D8ZD
LQW15AN5N2G8ZD
LQW15AN5N3B8ZD
5.3
LQW15AN5N3C8ZD
LQW15AN5N3D8ZD
LQW15AN5N3G8ZD
LQW15AN5N4B8ZD
5.4
LQW15AN5N4C8ZD
LQW15AN5N4D8ZD
LQW15AN5N4G8ZD
LQW15AN5N5B8ZD
5.5
LQW15AN5N5C8ZD
LQW15AN5N5D8ZD
LQW15AN5N5G8ZD
LQW15AN5N6B8ZD
5.6
LQW15AN5N6C8ZD
LQW15AN5N6D8ZD
LQW15AN5N6G8ZD
LQW15AN5N7B8ZD
5.7
30
LQW15AN5N7C8ZD
LQW15AN5N7D8ZD
LQW15AN5N7G8ZD
LQW15AN5N8B8ZD
5.8
LQW15AN5N8C8ZD
LQW15AN5N8D8ZD
LQW15AN5N8G8ZD
LQW15AN5N9B8ZD
5.9
LQW15AN5N9C8ZD
LQW15AN5N9D8ZD
LQW15AN5N9G8ZD
SQecNo.JELF243A79135BVO1 LQW15ANGNOB8ZD LQW15AN6NOCBZD LQW15AN6NODBZD LQW15ANGNOGEZD LQW15ANGN1B8ZD LQW15AN6N1CBZD LQW15AN6N1DBZD LQW15ANGN1GEZD LQW15ANGNZB8ZD LQW15AN6N2CBZD LQW15AN6N2DBZD LQW15ANGNZGEZD LQW15ANGNSGEZD LQW15AN6N3JBZD LQW15ANGNAGEZD LQW15AN6N4JBZD LQW15ANGNSGEZD LQW15AN6N5JBZD LQW15ANGNGGEZD LQW15AN6NGJBZD LQW15ANGNVGEZD LQW15AN6N7JBZD LQW15ANGNSGEZD LQW15AN6N8JBZD LQW15ANGNQGEZD LQW15AN6N9JBZD LQW15AN7NOGEZD LQW15AN7NOJBZD LQW15AN7N1GEZD LQW15AN7N1JBZD LQW15AN7NZGEZD LQW15AN7N2JBZD LQW15AN7NSGEZD LQW15AN7N3JBZD LQW15AN7NAGEZD LQW15AN7N4JBZD LQW15AN7NSGEZD LQW15AN7N5JBZD LQW15AN7NGGEZD LQW15AN7NGJBZD LQW15AN7N‘IGEZD LQW15AN7N7JBZD LQW15AN7NSGEZD LQW15AN7N8JBZD LQW15AN7NQGEZD LQW15AN7N9JBZD LQW15AN8NOGEZD LQW15AN5NOJBZD LQW15AN8N1GEZD LQW15AN5N1JBZD LQW15AN8NZGEZD LQW15AN5N2JBZD LQW15AN8NSGEZD LQW15AN5N3JBZD LQW15AN8NAGEZD LQW15AN5N4JBZD
SpecNo.JELF243A-9138B-01 P.4/14
MURATA MFG.CO.,LTD
Reference Only
Customer
Part Number
MURATA
Part Number
Inductance Q
(min.)
DC
Resistance
( max.)
Self
Resonant
Frequency
(GHz min.)
Rated
Current
(mA)
ESD
Rank
6:25kV
(nH) Tolerance
LQW15AN6N0B8ZD
6.0
B:±0.1nH
C:±0.2nH
D:±0.5nH
G:±2%
32
0.056 8.0
1600
6
LQW15AN6N0C8ZD
LQW15AN6N0D8ZD
LQW15AN6N0G8ZD
LQW15AN6N1B8ZD
6.1
LQW15AN6N1C8ZD
LQW15AN6N1D8ZD
LQW15AN6N1G8ZD
LQW15AN6N2B8ZD
6.2 33
LQW15AN6N2C8ZD
LQW15AN6N2D8ZD
LQW15AN6N2G8ZD
LQW15AN6N3G8ZD 6.3
G:±2%
J:±5%
32 0.057 7.8
LQW15AN6N3J8ZD
LQW15AN6N4G8ZD 6.4 33
0.065
7.0
1380
LQW15AN6N4J8ZD
LQW15AN6N5G8ZD 6.5 32
LQW15AN6N5J8ZD
LQW15AN6N6G8ZD 6.6
30
0.078 1280
LQW15AN6N6J8ZD
LQW15AN6N7G8ZD 6.7
LQW15AN6N7J8ZD
LQW15AN6N8G8ZD 6.8 0.068 1450
LQW15AN6N8J8ZD
LQW15AN6N9G8ZD 6.9 32
0.069
8.5
1420
LQW15AN6N9J8ZD
LQW15AN7N0G8ZD 7.0 33 8.0
LQW15AN7N0J8ZD
LQW15AN7N1G8ZD 7.1
32
7.0
LQW15AN7N1J8ZD
LQW15AN7N2G8ZD 7.2
0.050 1700
LQW15AN7N2J8ZD
LQW15AN7N3G8ZD 7.3
LQW15AN7N3J8ZD
LQW15AN7N4G8ZD 7.4 30
LQW15AN7N4J8ZD
LQW15AN7N5G8ZD 7.5 35
LQW15AN7N5J8ZD
LQW15AN7N6G8ZD 7.6
30
LQW15AN7N6J8ZD
LQW15AN7N7G8ZD 7.7
LQW15AN7N7J8ZD
LQW15AN7N8G8ZD 7.8
LQW15AN7N8J8ZD
LQW15AN7N9G8ZD 7.9
LQW15AN7N9J8ZD
LQW15AN8N0G8ZD 8.0
LQW15AN8N0J8ZD
LQW15AN8N1G8ZD 8.1
32 0.069 6.5 1500
LQW15AN8N1J8ZD
LQW15AN8N2G8ZD 8.2
LQW15AN8N2J8ZD
LQW15AN8N3G8ZD 8.3
LQW15AN8N3J8ZD
LQW15AN8N4G8ZD 8.4
LQW15AN8N4J8ZD
SQecNo.JELF243A79135BVO1 LQW15AN8NSGEZD LQW15AN5N5JBZD LQW15AN8NGGEZD LQW15AN5NGJBZD LQW15AN8NVGEZD LQW15AN5N7JBZD LQW15AN8NSGEZD LQW15AN5N8JBZD LQW15AN8NQGEZD LQW15AN5N9JBZD LQW15AN9NOGEZD LQW15AN9NOJBZD LQW15AN9N1GEZD LQW15AN9N1JBZD LQW15AN9NZGEZD LQW15AN9N2JBZD LQW15AN9NSGEZD LQW15AN9N3JBZD LQW15AN9NAGEZD LQW15AN9N4JBZD LQW15AN9NSGEZD LQW15AN9N5JBZD LQW15AN9NGGEZD LQW15AN9NGJBZD LQW15AN9NVGEZD LQW15AN9N7JBZD LQW15AN9NSGEZD LQW15AN9N8JBZD LQW15AN9NQGEZD LQW15AN9N9JBZD LQW15AN10NGEZD LQW15AN1ONJBZD LQW15AN11NGEZD LQW15AN11NJBZD LQW15AN12NGEZD LQW15AN12NJBZD LQW15AN13NGEZD LQW15AN13NJBZD LQW15AN14NGEZD LQW15AN14NJBZD LQW15AN15NGEZD LQW15AN15NJBZD LQW15AN16NGEZD LQW15AN16NJBZD LQW15AN17NGEZD LQW15AN17NJBZD LQW15AN18NGEZD LQW15AN15NJBZD LQW15AN19NGEZD LQW15AN19NJBZD LQW15AN20NGEZD LQW15ANZONJBZD LQW15AN21NGEZD LQW15AN21NJBZD LQW15AN22NGEZD LQW15ANZZNJBZD
SpecNo.JELF243A-9138B-01 P.5/14
MURATA MFG.CO.,LTD
Reference Only
Customer
Part Number
MURATA
Part Number
Inductance Q
(min.)
DC
Resistance
( max.)
Self
Resonant
Frequency
(GHz min.)
Rated
Current
(mA)
ESD
Rank
6:25kV
(nH) Tolerance
LQW15AN8N5G8ZD 8.5
G:±2%
J:±5%
32 0.069 6.5 1500
6
LQW15AN8N5J8ZD
LQW15AN8N6G8ZD 8.6
31
0.070
6.5
1420
LQW15AN8N6J8ZD
LQW15AN8N7G8ZD 8.7
LQW15AN8N7J8ZD
LQW15AN8N8G8ZD 8.8
LQW15AN8N8J8ZD
LQW15AN8N9G8ZD 8.9
LQW15AN8N9J8ZD
LQW15AN9N0G8ZD 9.0 30
LQW15AN9N0J8ZD
LQW15AN9N1G8ZD 9.1
32
0.080
1400
LQW15AN9N1J8ZD
LQW15AN9N2G8ZD 9.2
0.081 6.0
LQW15AN9N2J8ZD
LQW15AN9N3G8ZD 9.3 34
LQW15AN9N3J8ZD
LQW15AN9N4G8ZD 9.4 33
LQW15AN9N4J8ZD
LQW15AN9N5G8ZD 9.5 32
LQW15AN9N5J8ZD
LQW15AN9N6G8ZD 9.6
33
LQW15AN9N6J8ZD
LQW15AN9N7G8ZD 9.7
LQW15AN9N7J8ZD
LQW15AN9N8G8ZD 9.8 34
LQW15AN9N8J8ZD
LQW15AN9N9G8ZD 9.9 32
LQW15AN9N9J8ZD
LQW15AN10NG8ZD 10 31
LQW15AN10NJ8ZD
LQW15AN11NG8ZD 11 32 0.083 6.2
LQW15AN11NJ8ZD
LQW15AN12NG8ZD 12
30 0.093
5.2
1240
LQW15AN12NJ8ZD
LQW15AN13NG8ZD 13
LQW15AN13NJ8ZD
LQW15AN14NG8ZD 14
31
0.111
1150
LQW15AN14NJ8ZD
LQW15AN15NG8ZD 15 0.114 5.5
LQW15AN15NJ8ZD
LQW15AN16NG8ZD 16
0.126 5.0 1000
LQW15AN16NJ8ZD
LQW15AN17NG8ZD 17
30
LQW15AN17NJ8ZD
LQW15AN18NG8ZD 18 0.130 5.2 1050
LQW15AN18NJ8ZD
LQW15AN19NG8ZD 19 0.156 5.0 920
LQW15AN19NJ8ZD
LQW15AN20NG8ZD 20 0.186
4.5
800
LQW15AN20NJ8ZD
LQW15AN21NG8ZD 21
0.202 780
LQW15AN21NJ8ZD
LQW15AN22NG8ZD 22
LQW15AN22NJ8ZD
SQecNo.JELF243A79135BrO1 LQW15AN23NGEZD LQW15AN23NJBZD LQW15AN24NGEZD LQW15AN24NJBZD LQW15AN25NGEZD LQW15AN25NJBZD LQW15AN26NGEZD LQW15AN26NJBZD LQW15AN27NGEZD LQW15ANZ7NJBZD LQW15AN30NGEZD LQW15AN30NJBZD LQW15AN33NGEZD LQW15AN33NJBZD LQW15AN36NGEZD LQW15AN36NJBZD LQW15AN39NGEZD LQW15AN39NJBZD LQW15AN43NGEZD LQW15AN43NJBZD LQW15AN47NGEZD LQW15AN47NJBZD LQW15AN51NGEZD LQW15AN51NJBZD LQW15AN53NGEZD LQW15AN53NJBZD LQW15AN56NGEZD LQW15AN56NJBZD LQW15AN68NGEZD LQW15AN65NJBZD LQW15AN75NGEZD LQW15AN75NJBZD Deramng ml Rated Current degend on OQeratmg Temgerature
SpecNo.JELF243A-9138B-01 P.6/14
MURATA MFG.CO.,LTD
Reference Only
Customer
Part Number
MURATA
Part Number
Inductance Q
(min.)
DC
Resistance
( max.)
Self
Resonant
Frequency
(GHz min.)
Rated
Current
(mA)
ESD
Rank
6:25kV
(nH) Tolerance
LQW15AN23NG8ZD 23
G:±2%
J:±5%
29 0.201 4.5 760
6
LQW15AN23NJ8ZD
LQW15AN24NG8ZD 24
31
0.212 4.0 770
LQW15AN24NJ8ZD
LQW15AN25NG8ZD 25 0.221
4.1
750
LQW15AN25NJ8ZD
LQW15AN26NG8ZD 26 29 0.282 720
LQW15AN26NJ8ZD
LQW15AN27NG8ZD 27
30
0.288 4.0 680
LQW15AN27NJ8ZD
LQW15AN30NG8ZD 30 0.309 3.8 660
LQW15AN30NJ8ZD
LQW15AN33NG8ZD 33 0.336 3.6 620
LQW15AN33NJ8ZD
LQW15AN36NG8ZD 36 0.431 3.5 540
LQW15AN36NJ8ZD
LQW15AN39NG8ZD 39 28 0.456
3.4
530
LQW15AN39NJ8ZD
LQW15AN43NG8ZD 43 30 0.516 515
LQW15AN43NJ8ZD
LQW15AN47NG8ZD
47
25
0.648 3.2 440
LQW15AN47NJ8ZD
LQW15AN51NG8ZD 51
0.696
2.9
415
LQW15AN51NJ8ZD
LQW15AN53NG8ZD 53
LQW15AN53NJ8ZD
LQW15AN56NG8ZD 56 0.996 340
LQW15AN56NJ8ZD
LQW15AN68NG8ZD 68 1.128 2.5
320
LQW15AN68NJ8ZD
LQW15AN75NG8ZD 75 1.224 2.4
LQW15AN75NJ8ZD
Derating of Rated Current depend on Operating Temperature
4. Testing Conditions
Unless otherwise specified In case of doubt
Temperature Ordinary Temperature / 15°C to 35°C Temperature 20°C±2°C
Humidity Ordinary Humidity / 25%(RH) to 85%(RH) Humidity 60%(RH) to 70%(RH)
Atmospheric Pressure 86kPa to 106 kPa
125
85
100
50
Current derating (%)
0
0
Temperature ()
.
SgecNo.JELF243Aa9138Ba01 <—-> { IUnil mass (Typical value) I 0.00039 \ w 0 Tesl Melhdd uipmenl . KEYSIGHT 4257A or equlvalem quency . 100MHz 250MHz / l.anH~43nH 200MHz / 47nH~75nH ondillun - Tesl signal level /ahoul OdBm Eleclrode spaces / 0.5mm Eleclrical lengm / 10mm ure : KEYSIGHT16197A under lesl as shown in heldw and ednlacl coil inal by adding weighl. Measurlng Memod See lhe ehdnole
SpecNo.JELF243A-9138B-01 P.7/14
MURATA MFG.CO.,LTD
Reference Only
5.
Appearance and Dimensions
Unit mass (Typical value)
0.0008g
(in mm)
6. Electrical Performance
No. Item Specification Test Method
6.1 Inductance Inductance shall meet item 3. Measuring EquipmentKEYSIGHT 4287A or equivalent
Measuring Frequency<Inductance> 100MHz
<Q> 250MHz / 1.3nH43nH
200MHz /
47nH75nH
Measuring ConditionTest signal level
/ about 0dBm
Electrode spaces / 0.5mm
Electrical length
/ 10mm
Measuring Fixture KEYSIGHT 16197A
Position coil under test as shown in below and contact coil
with each terminal by adding weight.
Measuring MethodSee the endnote.
<Electrical Performance
Measuring Method of Inductance/Q>
6.2
Q Q shall meet item 3.
6.3 DC Resistance DC Resistance shall meet item 3. Measuring EquipmentDigital multi meter
6.4 Self Resonant
Frequency
(S.R.F)
S.R.F shall meet item 3. Measuring EquipmentKEYSIGHT 5230A or equivalent
6.5 Rated Current Self temperature rise shall be
limited to 40°C max.
The rated current is applied.
1.0 ± 0.1
0.5 ± 0.1
0.6 ± 0.1
0.1± 0.05
0.2 ± 0.1
1005 Size Guide
SQecNo.JELF243A7913BEVO1 R e fe r e n C e O n y Tab‘e A
SpecNo.JELF243A-9138B-01 P.8/14
MURATA MFG.CO.,LTD
Reference Only
7. Q200 Requirement
7.1. Performance (based on Table 5 for Magnetics(Inductors / Transformer)
AEC-Q200 Rev.D issued June 1. 2010
AEC-Q200 Murata Specification / Deviation
No Stress Test Method
3 High
Temperature
Exposure
1000hours at 125 deg C
Set for 24hours at room
temperature, then measured.
Meet Table A after testing.
Table A
4 Temperature
Cycling
1000cycles
-40 deg C to +125 deg C
Set for 24hours at room
temperature,then
measured.
Meet Table A after testing.
7 Biased Humidity 1000hours at 85 deg C, 85%RH
unpowered.
Meet Table A after testing.
8 Operational Life Apply 125 deg C 1000hours
Set for 24hours at room
temperature, then measured
Meet Table A after testing.
9 External Visual Visual inspection
No abnormalities
10 Physical Dimension Meet ITEM 5
(Style and Dimensions)
No defects
12 Resistance
to Solvents
Per
MIL-STD-202
Method 215
Not Applicable
13 Mechanical Shock Per MIL-STD-202
Method 213
Condition C100g’s (0.98N),
6ms, Half sine, 12.3ft/s
Meet Table A after testing.
14 Vibration 5g's (0.049N) for 20 minutes,
12cycles each of 3 orientations
Test from 10-2000Hz.
Meet Table A after testing.
15 Resistance
to Soldering Heat
No-heating
Solder temperature
260C+/-5 deg C
Immersion time 10s
Pre-heating150C +/-10 deg C, 60s to 90s
Meet Table A after testing.
17 ESD Per AEC-Q200-002 ESD RankRefer to Item 3. Rating.
Meet Table A after testing
18 Solderbility Per J-STD-002 Method bNot Applicable
95% of the terminations is to be soldered.
(Except exposed wire)
19 Electrical
Characterization
MeasuredInductance No defects
20 Flammability Per UL-94 Not Applicable
Appearance No damage
Inductance change
(at 100MHz) Within ±5
SQecNo.JELF243A79135BsO1 Table B DC resistance change within 110% erminal Strength Per AECVQZOOVOOG A lame cf17.7N for 605 No delecls Muraia Devialion Requesi . 5N/605 lion of Packaging arance and Dimensions of paper iape (Bmmwide) 8.2 Specification oi Taping (i) Packing quantity (standard quantity) 10‘000 pcs. / reel (2) Packing Method (in mm) Products shall be packed in the Cavity of the base tape and sealed by Cover tape, (3) Splockel hole The sprocket holes are to the right as the tape is pulled toward the user. (4) Spliced point Base tape and Cover tape has no spliced point. (5) Missing components numoer Missing components number Within 0.1% ol the number per reel or 1 pc,, whichever is greater, and are not continuous. The Specified quantily per reel is kept 8.3 Full Sirenglh 8.4 Peeling off lorce of cover tape Speed of Peeling oil 300mm/mln 165‘ to 130 Peeling oti rorce 0.1N I006N (minimum value is Iypical) 8.5 Dimensions of Leader-Iape,Trailer and Reel There shall be ieadelsiape (cover tape and empty tape) and trailerslape (empty tape) as follows. Cover tape F / Basetape Trailer Leader 20:05 160mm LDEI ‘ 3 I90 min 210 min é Empty tape Cover tape Macao “’01 ’ , i=9 ‘ ‘ $21 ago a Direction or feed 90 7o 7 is 021 A ll MURATA MFG CO,,LTD
SpecNo.JELF243A-9138B-01 P.9/14
MURATA MFG.CO.,LTD
Reference Only
AEC-Q200 Murata Specification / Deviation
No Stress Test Method
21 Board Flex Epoxy-PCB(1.6mm)
Deflection 2mm(min)
Holding time 60s
Meet Table B after testing.
Table B
22 Terminal Strength Per AEC-Q200-006
A force of 17.7N
for 60s
No defects
Murata Deviation Request5N/60s
8. Specification of Packaging
8.1 Appearance and Dimensions of paper tape (8mm-wide)
(in mm)
8.2 Specification of Taping
(1) Packing quantity (standard quantity)
10,000 pcs. / reel
(2) Packing Method
Products shall be packed in the cavity of the base tape and sealed by Cover tape.
(3) Sprocket hole
The sprocket holes are to the right as the tape is pulled toward the user.
(4) Spliced point
Base tape and Cover tape has no spliced point.
(5) Missing components number
Missing components number within 0.1% of the number per reel or 1 pc., whichever is greater, and are not
continuous. The Specified quantity per reel is kept.
8.3 Pull Strength
Cover tape 5N min.
8.4 Peeling off force of cover tape
Speed of Peeling off 300mm/min
Peeling off force 0.1N to 0.6N
(minimum value is typical)
8.5 Dimensions of Leader-tape,Trailer and Reel
There shall be leader-tape (cover tape and empty tape) and trailer-tape (empty tape) as follows.
(in mm)
F
Cover tape
Base tape
165
°
to 180
Empty tape
190 min.
Leader
Trailer
2.0±0.5
φ
13.0±0.2
φ
21.0±0.8
φ
180
φ
60
9.0
13.0±1.4
+1
-
0
+0
-3
Direction of feed
210 min.
160 min.
Cover tape
+1
-0
Label
Appearance No damage
DC resistance change Within ±10
Direction of feed
2.0±0.05 0.80 max
1.75±0.1
Φ1.5± 0
0.1
4.0±0.1
2.0±0.05
3.5±0.05
8.0±0.2
0.75±0.03
1.180±0.03
SQecNo.JELF243A7913BEVO1 R e fe r e n C e O n I y 0000 XXX
SpecNo.JELF243A-9138B-01 P.10/14
MURATA MFG.CO.,LTD
Reference Only
8.6 Marking for reel
Customer part number, MURATA part number, Inspection number (1), RoHS marking (2), Quantity etc ・・・
1) <Expression of Inspection No.> □□ OOOO XXX
(1) (2) (3)
(1) Factory Code
(2) Date First digit Year / Last digit of year
Second digit Month / Jan. to Sep. 1 to 9, Oct. to Dec. O, N, D
Third, Fourth digit Day
(3) Serial No.
2) <Expression of RoHS marking> ROHS – Y ()
(1) (2)
(1) RoHS regulation conformity
(2) MURATA classification number
8.7 Marking for Outside package (corrugated paper box)
Customer name, Purchasing order number, Customer part number, MURATA part number, RoHS Marking (2) ,
Quantity, etc ・・
8.8. Specification of Outer Case
Outer Case Dimensions (mm) Standard Reel Quantity
in Outer Case (Reel)
W D H
186 186 93 5
Above Outer Case size is typical. It depends on a quantity
of an order.
9. Caution
9.1 Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high reliability for
the prevention of defects which might directly cause damage to the third party's life, body or property.
(1) Aircraft equipment (6) Transportation equipment (trains, ships, etc.)
(2) Aerospace equipment (7) Traffic signal equipment
(3) Undersea equipment (8) Disaster prevention / crime prevention equipment
(4) Power plant control equipment (9) Data-processing equipment
(5) Medical equipment (10) Applications of similar complexity and /or reliability
requirements to the applications listed in the above
9.2 Caution (Rating)
Do not exceed maximum rated current of the product. Thermal stress may be transmitted to the product and short /
open circuit of the product or falling off the product may be occurred.
9.3 Fail-safe
Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused
by the abnormal function or the failure of our product.
W
D
Label
H
SQecNo.JELF243A7913BEVO1 R e fe r e n C e O n I y
SpecNo.JELF243A-9138B-01 P.11/14
MURATA MFG.CO.,LTD
Reference Only
10. Notice
Products can only be soldered with reflow.
This product is designed for solder mounting.
Please consult us in advance for applying other mounting method such as conductive adhesive.
10.1 Land pattern designing
Recommended land patterns for reflow soldering are as follows
These have been designed for Electric characteristics and solderability.
Please follow the recommended patterns. Otherwise, their performance which includes electrical performance or
solderability may be affected, or result to "position shift" in soldering process.
a 0.6
b 1.42
c 0.66
(in mm)
10.2 Flux, Solder
Use rosin-based flux.
Includes middle activator equivalent to 0.06(wt)% to 0.1(wt) % Chlorine.
Don’t use highly acidic flux with halide content exceeding 0.2(wt) % (chlorine conversion value).
Don’t use water-soluble flux.
Use Sn-3.0Ag-0.5Cu solder.
Standard thickness of solder paste : 50μm to 100μm.
10.3 Reflow soldering conditions
Pre-heating should be in such a way that the temperature difference between solder and product surface is limited to
150°C max. Cooling into solvent after soldering also should be in such a way that the temperature difference is
limited to 100°C max.
Insufficient pre-heating may cause cracks on the product, resulting in the deterioration of products quality.
Standard soldering profile and the limit soldering profile is as follows.
The excessive limit soldering conditions may cause leaching of the electrode and / or resulting in the deterioration of
product quality.
Reflow soldering profile
Standard Profile Limit Profile
Pre-heating 150°C180°C 90s±30s
Heating above 220°C30s60s above 230°C60s max.
Peak temperature 245°C±3°C 260°C,10s
Cycle of reflow 2 times 2 times
Limit Profile
Standard Profile
90s±30s
230℃
260℃
245±3
220℃
30s~60s
60s max.
180
150
Temp.
(s)
(℃)
Time.
a
b
c
Chip Coil
Solder resist
Land
SQECNOJELF243A7913EBVO1 ) D 0% O ( ) O D O D K E 7 El the PCB‘ Iherefore A > D IS \nva‘ Lengthekb \f (3) Mourning Componenls Near Screw Holes When a componem Is mounled near a screw hole u may be affecled by the board deflecfion lhal occurs dunng Ihe (Ighlenmg 0! me screw, Mount Ihe componenl rn a pcsmon as far away from me screw holes as possrme ©E-> Screw Hole Rec MURATA MFG,CO.,LTD
SpecNo.JELF243A-9138B-01 P.12/14
MURATA MFG.CO.,LTD
Reference Only
10.4 Reworking with soldering iron
The following conditions must be strictly followed when using a soldering iron.
Pre-heating 150°C,1 min
Tip temperature 350°C max.
Soldering iron output 80W max.
Tip diameter φ3mm max.
Soldering time 3 (+1,-0)s
Time 2 times
NoteDo not directly touch the products with the tip of the soldering iron in order to prevent the crack on the products
due to the thermal shock.
10.5 Solder Volume
Solder shall be used not to be exceeded the upper limits as shown below.
Accordingly increasing the solder volume, the mechanical stress to Chip is also increased.
Exceeding solder volume may cause the failure of mechanical or electrical performance.
1/3TtT
Tthickness of product
10.6 Product’s location
The following shall be considered when designing and laying out P.C.B.'s.
(1) P.C.B. shall be designed so that products are not subject to the mechanical stress due to warping the board.
Products direction
Products shall be located in the sideways
direction (Lengthab) to the mechanical
stress.
(2) Components location on P.C.B. separation.
It is effective to implement the following measures, to reduce stress in separating the board.
It is best to implement all of the following three measures; however, implement as many measures
as possible to reduce stress.
Contents of Measures Stress Level
(1) Turn the mounting direction of the component parallel to
the board separation surface. A > D 1
(2) Add slits in the board separation part. A > B
(3) Keep the mounting position of the component away from
the board separation surface. A > C
1 A > D is valid when stress is added vertically to
the perforation as with Hand Separation.
If a Cutting Disc is used, stress will be diagonal to
the PCB, therefore A > D is invalid.
(3) Mounting Components Near Screw Holes
When a component is mounted near a screw hole,
it may be affected by the board deflection that occurs
during the tightening of the screw. Mount the component
in a position as far away from the screw holes as possible.
Recommendable(t)
Upper Limit
T
Recommendable(t)
Upper Limit
T
Poor example
Good example
b
a
Seam
Slit
AD
BC
b
a
Length:a
<
b
Screw Hole
Recommended
SQecNoJELFZASArQflBBrm R e fe r e n C e O n y
SpecNo.JELF243A-9138B-01 P.13/14
MURATA MFG.CO.,LTD
Reference Only
10.7 Cleaning Conditions
Products shall be cleaned on the following conditions.
(1) Cleaning temperature shall be limited to 60°C max.(40°C max for IPA)
(2) Ultrasonic cleaning shall comply with the following conditions with avoiding the resonance phenomenon at
the mounted products and P.C.B.
Power20 W / l max. Frequency28kHz to 40kHz Time5 min max.
(3) Cleaner
1. Alcohol type cleaner
Isopropyl alcohol (IPA)
2. Aqueous agent
PINE ALPHA ST-100S
(4) There shall be no residual flux and residual cleaner after cleaning.
In the case of using aqueous agent, products shall be dried completely after rinse with de-ionized water in
order to remove the cleaner.
(5) Other cleaning Please contact us.
10.8 Resin coating
The inductance value may change due to high cure-stress of resin to be used for coating/molding products.
An open circuit issue may occur by mechanical stress caused by the resin, amount/cured shape of resin, or operating
condition etc. Some resin contains some impurities or chloride possible to generate chlorine by hydrolysis under some
operating condition may cause corrosion of wire of coil, leading to open circuit. So, please pay your careful attention
when you select resin in case of coating/molding the products with the resin.
Prior to use the coating resin, please make sure no reliability issue is observed by evaluating products mounted on your
board.
10.9 Caution for use
Sharp material such as a pair of tweezers or other material such as bristles of cleaning brush , shall not be touched
to the winding portion to prevent the breaking of wire.
Mechanical shock should not be applied to the products mounted on the board to prevent the breaking of the core.
10.10 Notice of product handling at mounting
In some mounting machines,when picking up components support pin pushes up the components from the bottom of base
tape. In this case, please remove the support pin. The support pin may damage the components and break wire.
In rare case ,the laser recognition can not recognize this component. Please contact us when you use laser recognition.
(There is no problem with the permeation and reflection type.)
10.11 Handling of a substrate
After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the
substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to
the substrate.
Excessive mechanical stress may cause cracking in the product.
Bending Twisting
10.12 Storage and Handing Requirements
(1) Storage period
Use the products within 12 months after delivered.
Solderability should be checked if this period is exceeded.
(2) Storage conditions
Products should be stored in the warehouse on the following conditions.
Temperature -10°C to 40°C
Humidity 15% to 85% relative humidity No rapid change on temperature and humidity
Don't keep products in corrosive gases such as sulfur,chlorine gas or acid, or it may cause oxidization of
electrode, resulting in poor solderability.
Products should not be stored on bulk packaging condition to prevent the chipping of the core and the breaking
of winding wire caused by the collision between the products.
Products should be stored on the palette for the prevention of the influence from humidity, dust and so on.
Products should be stored in the warehouse without heat shock, vibration, direct sunlight and so on.
(3) Handling Condition
Care should be taken when transporting or handling product to avoid excessive vibration or mechanical shock.
SQecNo.JELF243A7913BEVO1 R e fe r e n C e O n I y A
SpecNo.JELF243A-9138B-01 P.14/14
MURATA MFG.CO.,LTD
Reference Only
11. Note
(1) Please make sure that your product has been evaluated in view of your specifications with our product being
mounted to your product.
(2) You are requested not to use our product deviating from the reference specifications.
(3) The contents of this reference specification are subject to change without advance notice.
Please approve our product specifications or transact the approval sheet for product specifications before ordering.
(1) Residual elements and stray elements of test fixture can be described by F-parameter shown in following.
(2) The impedance of chip coil Zx and measured value Zm can be described by input/output current/voltage.
Zm= V1 Zx=
V2
I 1 I
2
(3) Thus,the relation between Zx and Zm is following;
Zx= α Zm-β where, α= D / A =1
1-ZmΓ β= B / D =Zsm-(1-Yom Zsm)Zss
Γ= C / A =Yom
Zsm measured impedance of short chip
Zss residual impedance of short chip (0.556nH)
Yom measured admittance when opening the fixture
(4) Lx and Qx shall be calculated with the following equation.
Lx= Im(Zx) , Qx = Im(Zx) Lx Inductance of chip coil
2πf Re(Zx) Qx Q of chip coil
f
Measuring frequency
V1 = A B V2
I 1 C D I 2
AB
CD
Zm Zx
V
12
12
ProductTest fixtureTest Head
II
V
< Electrical Performance:Measuring Method of Inductance/Q >

Products related to this Datasheet

FIXED IND 33NH 620MA 336MOHM SMD
Available Quantity: 32,069
Unit Price: 0.37
FIXED IND 3.3NH 2A 30 MOHM SMD
Available Quantity: 9,950
Unit Price: 0.37
FIXED IND 30NH 660MA 309MOHM SMD
Available Quantity: 9,944
Unit Price: 0.33
FIXED IND 2.8NH 1.5A 47MOHM SMD
Available Quantity: 9,415
Unit Price: 0.34
FIXED IND 2.8NH 1.5A 47MOHM SMD
Available Quantity: 9,407
Unit Price: 0.33
FIXED IND 2.6NH 1.95A 35MOHM SMD
Available Quantity: 38,359
Unit Price: 0.37
FIXED IND 2.8NH 1.5A 47MOHM SMD
Available Quantity: 9,153
Unit Price: 0.37
FIXED IND 3NH 1.35A 63 MOHM SMD
Available Quantity: 9,144
Unit Price: 0.33
FIXED IND 3NH 1.35A 63 MOHM SMD
Available Quantity: 8,575
Unit Price: 0.34
FIXED IND 2.9NH 1.5A 47MOHM SMD
Available Quantity: 8,537
Unit Price: 0.37
FIXED IND 2.7NH 1.5A 47MOHM SMD
Available Quantity: 8,338
Unit Price: 0.33
FIXED IND 3NH 1.35A 63 MOHM SMD
Available Quantity: 8,246
Unit Price: 0.37
FIXED IND 2.6NH 1.95A 35MOHM SMD
Available Quantity: 18,223
Unit Price: 0.37
FIXED IND 39NH 530MA 456MOHM SMD
Available Quantity: 8,065
Unit Price: 0.33
FIXED IND 2.8NH 1.5A 47MOHM SMD
Available Quantity: 7,383
Unit Price: 0.37
FIXED IND 2.6NH 1.95A 35MOHM SMD
Available Quantity: 5,657
Unit Price: 0.34
FIXED IND 2.7NH 1.5A 47MOHM SMD
Available Quantity: 5,471
Unit Price: 0.37
FIXED IND 3.3NH 2A 30 MOHM SMD
Available Quantity: 4,841
Unit Price: 0.34
FIXED IND 30NH 660MA 309MOHM SMD
Available Quantity: 4,803
Unit Price: 0.37
FIXED IND 2.9NH 1.5A 47MOHM SMD
Available Quantity: 4,623
Unit Price: 0.34
FIXED IND 3NH 1.35A 63 MOHM SMD
Available Quantity: 4,096
Unit Price: 0.37
FIXED IND 36NH 540MA 431MOHM SMD
Available Quantity: 3,807
Unit Price: 0.37
FIXED IND 2.7NH 1.5A 47MOHM SMD
Available Quantity: 3,692
Unit Price: 0.34
FIXED IND 2.9NH 1.5A 47MOHM SMD
Available Quantity: 3,148
Unit Price: 0.37
FIXED IND 36NH 540MA 431MOHM SMD
Available Quantity: 2,987
Unit Price: 0.33
FIXED IND 33NH 620MA 336MOHM SMD
Available Quantity: 2,885
Unit Price: 0.33
FIXED IND 39NH 530MA 456MOHM SMD
Available Quantity: 2,362
Unit Price: 0.37
FIXED IND 2.7NH 1.5A 47MOHM SMD
Available Quantity: 2,112
Unit Price: 0.37
FIXED IND 2.6NH 1.95A 35MOHM SMD
Available Quantity: 0
Unit Price: 0
FIXED IND 2.9NH 1.5A 47MOHM SMD
Available Quantity: 0
Unit Price: 0