DFR0308 Datasheet by DFRobot

View All Related Products | Download PDF Datasheet
RDBCIT
DTMFShieldForArduinoSKU:DFR0308
INTRODUCTION
This DTMF Shield is a Dual-tone multi-frequency signaling module decoder for Arduino With
it's audio connector you can decode the crazy funny noises common phones make. If you are not
sure what I'm talking about, imagine a home phone while pressing several of its keys. These
Touch-Tones have a specific frequency or sound that this module can decode. This Shield is a
Audio code system that will allow you to send commands to your Arduino via Audio signal.
Together with GMS / GPRS / GPS shield this module can communicate your Arduino with any
phone land line or Cell phone in the world, within GSM signal range. Which goes as far as your
cellphone.
APPLICATIONS
Its quite convenient to send wireless commands over audio lines, like a phone call. Connected to
our GSM/GPS shield, you could just call your robot and press any button or set of buttons to
enable it.
Connect DFRobot mp3 module to this board to enable audio feedback when pressing keys, or a
welcome message when the phone call is established. Enable GPS geo location mapping, and
DTMF moving functions to have a GSM wireless networking remote controlled robot.
Note: For use with the GSM / GPS / GPRS shield, you will need an audio cable (FIT0113)
SPECIFICATION
Audiosocketforapplication
37x37x9mm1.46x1.46x0.35"
Speakerconnectorforaudiosoundchecking.
Microphoneconnectorforovertheairremotecontrolsystem(note,duetoenvironmental
noise,withoutanyfilteringsystemthismethodisnotrecommended)
SHIPPING LIST
DTMFmodulex1
Powered By DFRobot © 2008-2017

Products related to this Datasheet

DTMF SHIELD
Available Quantity: 0
Unit Price: 23.33