Lacing Tape Datasheet by Techflex

View All Related Products | Download PDF Datasheet
vééééé4§Q46$ . A Braided Sleeving Products h f @TECHFLEX
TERMINATIONS
& BUNDLING
Technical Data Sheet
Type I
Polyamide (Nylon)
Lacing Tape
-67ºF to 250ºF
(-55ºC to 121ºC)
Type II
Polyester (Dacron)
Lacing Tape
-99ºF to 350ºF
(-73ºC to 177ºC)
Type III
TFE-Fluorocarbon (Teflon)
Lacing Tape
-99ºF to 450ºF
(-73ºC to 232ºC)
Type IV
Fiberglass (Glass)
Lacing Tape
-67ºF to 800ºF
(-55ºC to 427ºC)
TypeV
Meta Aramid (Nomex)
Lacing Tape
-67ºF to 500ºF
(-55ºC to 260ºC)
MIL-T-43435
Scissors
Cut Cleanly
www.techflex.com
Cable Lacing - Inexpensive Method of Wire Dressing
While cable ties are the most common method of wire dressing, there is an alter-
nate method known as cable lacing. This method has been used on aircraft, ships,
and military equipment for many years.
Lacing Tape meets Military Specification MIL-T-43435 and is made of braided
Nylon, Polyester, TFE-Fluorocarbon, Fiberglass or Flexo NX.
The basic concept of lacing is to use a flat cord to tie the cable bundle together.
While lacing may be somewhat of a lost art - its easy to learn, and you will be lac-
ing your bundling projects in no time.
Why lacing tape? Lasts longer than cable ties. Cable ties turn brittle
and degrade over time due to environmental exposure
and loss of plasticizers. A roll of lacing tape can manage
any size cable bundle, from a couple of 22AWG wires to
a fistful of heavy power cables.
Cable ties leave a sharp edge where the tail was cut off
that can snag or get hung up. Some applications such as
aerospace and aviation may specify laced harnesses as
a design requirement. Lacing tape is ideal for lashing wires
or cables to ladder bars, conduit and other wire
management solutions.
Unlike cable ties, the insulation on wires bundled with lacing
tape has less chance of cold flowing and shorting. No sharp
edges to cut installers hands when reaching into a tightly
packed wiring cavity. Lacing tape is available in a wide range
of materials, sizes and finishes to accommodate any
engineering requirement.
MIL Finishes:
Finish A = No Finish
Finish B = Wax
Finish C = Synthetic Elastomer (Rubber) Finish
Finish D = TFE-Fluorocarbon Finish
Finish G = Liquid Nylon®
Cable lacing - easy to learn, quite inexpensive,
looks more attractive, and is a superior method
of bundling wires in your boat.
Colors Available:
Natural (NT), Red (RD),
Brown (BR), Black (BK).
www.techflex.com
800.323.5140 • 973.300.9242 • fax: 973.300.9409
104 Demarest Road • Sparta, NJ 07871
Part
#Mil Spec Material Mil Spec
Size Break
Strength
Width Thickness Bulk
Spool Available
Colors
Min Max Min Max
LT1-S1-FA-** A-A-52080
MIL-T-43435 TYPE I Nylon 1 135lbs .180” .220” .013” .019” 750’ NT & BK
LT1-S2-FA-** A-A-52080
MIL-T-43435 TYPE I Nylon 2 80lbs .099” .121” .012” .018” 750’ NT & BK
LT1-S3-FA-** A-A-52080
MIL-T-43435 TYPE I Nylon 3 50lbs .077” .094” .011” .017” 1,500’ NT & BK
LT1-S4-FA-** A-A-52080
MIL-T-43435 TYPE I Nylon 4 25lbs .054” .066” .009” .015” 1,500’ NT & BK
LT1-S5-FA-** A-A-52080
MIL-T-43435 TYPE I Nylon 5 15lbs .045” .055” .006” .014” 1,500’ NT & BK
LT1-S1-FB-** A-A-52080
MIL-T-43435 TYPE I Nylon 1 135lbs .180” .220” .013” .019” 750' NT & BK
LT1-S2-FB-** A-A-52080
MIL-T-43435 TYPE I Nylon 2 80lbs .099” .121” .012” .018” 750' NT & BK
LT1-S3-FB-** A-A-52080
MIL-T-43435 TYPE I Nylon 3 50lbs .077” .094” .011” .017” 1,500’ NT & BK
LT1-S4-FB-** A-A-52080
MIL-T-43435 TYPE I Nylon 4 25lbs .054” .066” .009” .015” 1,500’ NT & BK
LT1-S5-FB-** A-A-52080
MIL-T-43435 TYPE I Nylon 5 15lbs .045” .055” .006” .014” 1,500’ NT & BK
LT1-S1-FC-** A-A-52080
MIL-T-43435 TYPE I Nylon 1 135lbs .180” .220” .013” .019” 750’ NT & BK
LT1-S2-FC-** A-A-52080
MIL-T-43435 TYPE I Nylon 2 80lbs .099” .121” .012” .018” 750’ NT & BK
LT1-S3-FC-** A-A-52080
MIL-T-43435 TYPE I Nylon 3 50lbs .077” .094” .011” .017” 1,500’ NT & BK
LT1-S4-FC-** A-A-52080
MIL-T-43435 TYPE I Nylon 4 25lbs .054” .066” .009” .015” 1,500’ NT & BK
LT1-S5-FC-** A-A-52080
MIL-T-43435 TYPE I Nylon 5 15lbs .045” .055” .006” .014” 1,500’ NT & BK
LT2-S1-FA-** A-A-52081
MIL-T-43435 TYPE II Polyester 1 135lbs .180” .220” .013” .019” 750’ NT & BK
LT2-S2-FA-** A-A-52081
MIL-T-43435 TYPE II Polyester 2 80lbs .099” .121” .012” .018” 750’ NT & BK
LT2-S3-FA-** A-A-52081
MIL-T-43435 TYPE II Polyester 3 50lbs .077” .094” .011” .017” 1,500’ NT & BK
LT2-S4-FA-** A-A-52081
MIL-T-43435 TYPE II Polyester 4 25lbs .054” .066” .009” .015” 1,500’ NT & BK
LT2-S5-FA-** A-A-52081
MIL-T-43435 TYPE II Polyester 5 15lbs .045” .055” .006” .014” 1,500’ NT & BK
LT2-S1-FB-** A-A-52081
MIL-T-43435 TYPE II Polyester 1 135lbs .180” .220” .013” .019” 750' NT, RD, & BK
LT2-S2-FB-** A-A-52081
MIL-T-43435 TYPE II Polyester 2 80lbs .099” .121” .012” .018” 750' NT, RD, & BK
LT2-S3-FB-** A-A-52081
MIL-T-43435 TYPE II Polyester 3 50lbs .077” .094” .011” .017” 1,500' NT, RD, & BK
LT2-S4-FB-** A-A-52081
MIL-T-43435 TYPE II Polyester 4 25lbs .054” .066” .009” .015” 1,500' NT, RD, & BK
LT2-S5-FB-** A-A-52081
MIL-T-43435 TYPE II Polyester 5 15lbs .045” .055” .006” .014” 1,500' NT, RD, & BK
LT2-S1-FC-** A-A-52081
MIL-T-43435 TYPE II Polyester 1 135lbs .180” .220” .013” .019” 750’ NT, RD, & BK
LT2-S2-FC-** A-A-52081
MIL-T-43435 TYPE II Polyester 2 80lbs .099” .121” .012” .018” 750’ NT, RD, & BK
LT2-S3-FC-** A-A-52081
MIL-T-43435 TYPE II Polyester 3 50lbs .077” .094” .011” .017” 1,500’ NT, RD, & BK
LT2-S4-FC-** A-A-52081
MIL-T-43435 TYPE II Polyester 4 25lbs .054” .066” .009” .015” 1,500’ NT, RD, & BK
LT2-S5-FC-** A-A-52081
MIL-T-43435 TYPE II Polyester 5 15lbs .045” .055” .006” .014” 1,500’ NT, RD, & BK
LT4-S1-FD-NT A-A-52083
MIL-T-43435 TYPE IV Fiberglass 1 200lbs .203” .248” .013” .019” 750’ Natural (NT)
LT4-S2-FD-NT A-A-52083
MIL-T-43435 TYPE IV Fiberglass 2 100lbs .099” .121” .013” .019” 750’ Natural (NT)
LT4-S3-FD-NT A-A-52083
MIL-T-43435 TYPE IV Fiberglass 3 75lbs .077” .094” .013” .019” 1,500’ Natural (NT)
LT4-S4-FD-NT A-A-52083
MIL-T-43435 TYPE IV Fiberglass 4 50lbs .054” .066” .013” .019” 1,500’ Natural (NT)
No Finish
Synthetic Rubber
No Finish
Synthetic Rubber
FINISH AFINISH C
FINISH AFINISH C FINISH B
Wax Finish
Wax Finish
FINISH B
TERMINATIONS
& BUNDLING
Technical Data Sheet
TFE
FINISH D
Mil Spec Break "lime” Bulk Available A-A-SZDEA
LT5-S1-FA-NT A-A-52084
MIL-T-43435 TYPE V Flexo NX 51 85lbs .180” .220” .013” .019” 750’ Natural (NT)
LT5-S2-FA-NT A-A-52084
MIL-T-43435 TYPE V Flexo NX 2 50lbs .099” .121” .011” .017” 750’ Natural (NT)
LT5-S3-FA-NT A-A-52084
MIL-T-43435 TYPE V Flexo NX 3 35lbs .068” .083” .009” .015” 1,500’ Natural (NT)
LT5-S4-FA-NT A-A-52084
MIL-T-43435 TYPE V Flexo NX 4 25lbs .050” .061” .007” .013” 1,500’ Natural (NT)
LT5-S1-FC-NT A-A-52084
MIL-T-43435 TYPE V Flexo NX 1 85lbs .180” .220” .013” .019” 750’ Natural (NT)
LT5-S2-FC-NT A-A-52084
MIL-T-43435 TYPE V Flexo NX 2 50lbs .099” .121” .011” .017” 750’ Natural (NT)
LT5-S3-FC-NT A-A-52084
MIL-T-43435 TYPE V Flexo NX 3 35lbs .068” .083” .009” .017” 1,500’ Natural (NT)
LT5-S4-FC-NT A-A-52084
MIL-T-43435 TYPE V Flexo NX 4 25lbs .050” .061” .007” .013” 1,500’ Natural (NT)
LT5-S1-FG-NT A-A-52084
MIL-T-43435 TYPE V Flexo NX 1 85lbs .180” .220” .013” .019” 750’ Natural (NT)
LT5-S2-FG-NT A-A-52084
MIL-T-43435 TYPE V Flexo NX 2 50lbs .099” .121” .011” .017” 750’ Natural (NT)
LT5-S3-FG-NT A-A-52084
MIL-T-43435 TYPE V Flexo NX 3 35lbs 068” .083” .009” .017” 1,500’ Natural (NT)
LT5-S4-FG-NT A-A-52084
MIL-T-43435 TYPE V Flexo NX 4 25lbs .050” .061” .007” .013” 1,500’ Natural (NT)
No Finish
FINISH A
LT3-S2-FA-BR A-A-52082
MIL-T-43435 TYPE III TFE-Flurocarbon 2 30lbs .108” .132” .009” .014” 750’ Brown (BR)
LT3-S4-FA-BR A-A-52082
MIL-T-43435 TYPE III TFE-Flurocarbon 4 15lbs .059” .072” .009” .014” 1,500’ Brown (BR)
Part
#Mil Spec Material Mil Spec
Size Break
Strength
Width Thickness Bulk
Spool Available
Colors
Min Max Min Max
No Finish
Synthetic Rubber
FINISH AFINISH C
© 2019 Techflex - Any unauthorized reproduction, in whole or part, in any medium whatsoever, without the express written permission of Techflex is strictly forbidden.
Techflex product names and logos are registered trademarks of Techflex, unless otherwise attributed. The contents and illustrations contained herein are believed to be reliable.
Techflex makes no warranties as to their accuracy or completeness and disclaims any liability in connection with their use. Techflex’s only obligations are those in standard terms of
sale for these products and Techflex will not be liable for any consequential or other damages arising due to misuse of these products or typographical errors or omissions.
Users should make their own evaluation to determine the suitability of these products for their unique and specific applications. 12-31
TERMINATIONS
& BUNDLING
Technical Data Sheet
Liquid Nylon®
FINISH G

Products related to this Datasheet

LACING TAPE BLACK 135LBS 750'
Available Quantity: 0
Unit Price: 70.63
LACING TAPE NATURAL 135LBS 750'
Available Quantity: 0
Unit Price: 63.14
LACING TAPE BLACK 80LBS 750'
Available Quantity: 0
Unit Price: 41.18
LACING TAPE NATURAL 80LBS 750'
Available Quantity: 0
Unit Price: 47.35
LACING TAPE BLACK 50LBS 1500'
Available Quantity: 0
Unit Price: 56.84
LACING TAPE NATURAL 50LBS 1500'
Available Quantity: 0
Unit Price: 47.82
LACING TAPE BLACK 25LBS 1500'
Available Quantity: 0
Unit Price: 49.41
LACING TAPE NATURAL 25LBS 1500'
Available Quantity: 0
Unit Price: 41.18
LACING TAPE BLACK 15LBS 1500'
Available Quantity: 0
Unit Price: 44.6
LACING TAPE NATURAL 15LBS 1500'
Available Quantity: 0
Unit Price: 36.04
LACING TAPE BLACK 135LBS 750'
Available Quantity: 0
Unit Price: 74.41
LACING TAPE NATURAL 135LBS 750'
Available Quantity: 0
Unit Price: 65.87
LACING TAPE BLACK 80LBS 750'
Available Quantity: 0
Unit Price: 48.73
LACING TAPE NATURAL 80LBS 750'
Available Quantity: 0
Unit Price: 40.9
LACING TAPE BLACK 50LBS 1500'
Available Quantity: 0
Unit Price: 54.9
LACING TAPE NATURAL 50LBS 1500'
Available Quantity: 0
Unit Price: 45.98
LACING TAPE BLACK 25LBS 1500'
Available Quantity: 0
Unit Price: 50.79
LACING TAPE NATURAL 25LBS 1500'
Available Quantity: 0
Unit Price: 41.85
LACING TAPE BLACK 15LBS 1500'
Available Quantity: 0
Unit Price: 48.73
LACING TAPE NATURAL 15LBS 1500'
Available Quantity: 0
Unit Price: 41.18