Cable Guide Datasheet by Digi

View All Related Products | Download PDF Datasheet
DIGI.’
PortServer® TS, Digi Connect®, and
Digi One® Products
Cable Guide
Revision history—90000253
Revision Date Description
G 2013 Initial release.
H February 2019 Updated branding and made editorial enhancements.
J June 2020 Updated cabling information: RJ45 10-pin to DB9F
modem cable and RJ45 10-pin to DB25F modem cable
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2019 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document as is,” without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Send comments
Documentation feedback: To provide feedback on this document, send your comments to
techcomm@digi.com.
Customer support
Digi Technical Support: Digi offers multiple technical support plans and service packages to help our
customers get the most out of their Digi product. For information on Technical Support plans and
pricing, contact us at +1 952.912.3444 or visit us at www.digi.com/support.
PortServer TS, Digi Connect, and Digi One Products Cable Guide 2
Contents
Cabling solutions by Digi product and device
DB9 and DB25 DTE/console/terminal/printer adapters
RJ45 to DB9 cable adapter 10
RJ45 to DB25F cable adapter 11
RJ45 to DB25M console adapter 12
RJ45 to DB25M printer adapter 13
RJ45 to DB25M modem adapter 14
DB9 DTE/console/terminal/printer cables
RJ45 to DB9F terminal emulator cable 16
RJ45 (Altpin on) to DB9F terminal emulator cable 17
RJ45 10-pin to DB9F terminal emulator cable 18
RJ45 (Altpin on) to DB9M terminal/printer cable 19
RJ45 to DB9M terminal/printer cable 20
DB25 DTE/console/terminal/printer cables
RJ45 (Altpin on) to DB25F terminal emulator cable 22
RJ45 10-pin to DB25F terminal emulator cable 23
RJ45 to DB25M terminal/printer cable 24
RJ45 10-pin to DB25M terminal/printer cable 25
Digi-to-Digi Cables
Async RJ45 to RJ45 crossover cable - for cross-connecting Digi asynchronous ports together 27
RJ45 to DB9M modem adapter 28
DB25 and DB9 modem cables
RJ45 (Altpin on) to DB25M modem cable 30
RJ45 (Altpin on) to DB9M modem cable 31
RJ45 10-pin to DB9M modem cable 32
RJ45 10-pin to DB9F modem cable 33
RJ45 10-pin to DB25M modem cable 34
RJ45 10-pin to DB25F modem cable 35
PortServer TS, Digi Connect, and Digi One Products Cable Guide 3
PortServer TS, Digi Connect, and Digi One Products Cable Guide 4
Specialty cables
Cisco console cables 37
Digi RJ45 to RJ45 cable adapters: 8-pin 37
RJ45 (Altpin On) to RJ45 Cisco console adapter 37
Cabling solutions by Digi product and device
Digi Passport and Digi CM products use different pinouts, please refer to the appropriate product
documentation.
RJ-
45
to
Male
or
female
Straight
or
crossover
Applications Cable
or
adapter
Part
number
Pin out Cable
identifier
DB-9 F Crossover Bay Accelar, Nortel and
other DB-9 DTE devices
Cable 76000645
(4')
RJ45 10-
pin to
DB9F
terminal
emulator
cable
61090048
Adapter
(4-pack)
76000697 RJ45 to
DB9
cable
adapter
N/A
PortServer TS, Digi Connect, and Digi One Products Cable Guide 5
Cabling solutions by Digi product and device
PortServer TS, Digi Connect, and Digi One Products Cable Guide 6
RJ-
45
to
Male
or
female
Straight
or
crossover
Applications Cable
or
adapter
Part
number
Pin out Cable
identifier
DB-9 M Crossover The unit provides a
single upstream
(standard B-type
receptacle) and 14
downstream (standard
Atype receptacles) USB
2.0 compliant ports. The
unit will attach to the
upstream device as a
Full-/Highspeed hub. The
downstream ports
support Low-Speed, Full-
Speed and High-Speed
downstream devices.
Each downstream facing
port provides a green
LED status indicator.
Color definitions are as
follows:E devices with
DB-9 female ports
Cable 76000264
(4')
RJ45 10-
pin to
DB9F
terminal
emulator
cable
61080048
Adapter None None N/A
DB-9 F Straight Modems and other DCE
devices with DB-9 male
ports
Cable 76000201
(4')
RJ45 10-
pin to
DB9F
modem
cable
61070024
61070048
Adapter None None N/A
DB-9 M Straight Modems and other DCE
devices with DB-9
female ports
Cable 76000240
(4')
RJ45 10-
pin to
DB9M
modem
cable
61060024
61060048
Adapter
(4-pack)
76000701 RJ45 to
DB9M
modem
adapter
N/A
Cabling solutions by Digi product and device
PortServer TS, Digi Connect, and Digi One Products Cable Guide 7
RJ-
45
to
Male
or
female
Straight
or
crossover
Applications Cable
or
adapter
Part
number
Pin out Cable
identifier
DB-
25
M Crossover Sun Sparc, Sun Ultra,
terminals, printers and
other DTE devices with
DB-25 female ports
Cable 76000238
(4')
RJ45 10-
pin to
DB25F
terminal
emulator
cable
61040048
Adapter
(4-pack)
76000698 RJ45 to
DB25M
console
adapter
N/A
DB-
25
F Crossover Cisco, IBM and other
DTE devices with DB-25
male ports
Cable N/A RJ45 10-
pin to
DB25F
terminal
emulator
cable
61050048
Adapter
(4-pack)
76000699 RJ45 to
DB25F
cable
adapter
N/A
DB-
25
M Straight Modems and other DCE
devices with DB-25
female ports
Cable 76000195
(4')
RJ45 10-
pin to
DB25M
modem
cable
61020024
Adapter
(4-pack)
76000700 RJ45 to
DB25M
modem
adapter
N/A
DB-
25
F Straight Modems and other DCE
devices with DB-25 male
ports
Cable 76000199
(4’)
RJ45 10-
pin to
DB25F
modem
cable
61030024
61030048
Adapter None N/A N/A
Cabling solutions by Digi product and device
PortServer TS, Digi Connect, and Digi One Products Cable Guide 8
RJ-
45
to
Male
or
female
Straight
or
crossover
Applications Cable
or
adapter
Part
number
Pin out Cable
identifier
RJ-
45
M *Special* For use with Cisco and
Sun RJ-45 console ports.
Cable 76000631
(6’)
RJ45
(Altpin
On) to
RJ45
Cisco
console
adapter
63000222-
02
Adapter None None N/A
nAll RJ-45 to DBx cables are 10-pin. Only the RJ-45 to RJ-45 cable is an 8-pin cable.
nAll RJ-45 adapters are 8-pin. When using these adapters with modems or other applications
that require DCD on pin 1, you must turn on altpin.
nIf altpin is turned off, the hardware signal on pin 1 becomes DSR instead of DCD. This
alternative can be used if DCD is not required, and DSR is needed instead.
DB9 and DB25 DTE/console/terminal/printer
adapters
RJ45 to DB9 cable adapter 10
RJ45 to DB25F cable adapter 11
RJ45 to DB25M console adapter 12
RJ45 to DB25M printer adapter 13
RJ45 to DB25M modem adapter 14
PortServer TS, Digi Connect, and Digi One Products Cable Guide 9
From Signal Directinn Signal Yo R145 III-9 1 D0) (— DTR 4 2 RTS —) crs s 3 Gmmd (-) Ground Shell 4 TxD —) Rm 2 5 km (— TxD 3 6 SG (—) SG 5 7 crs (— RTS 7 s nm 'E: Dc) 1 DSR 6 g4?) Cable Mater notbo scale
DB9 and DB25 DTE/console/terminal/printer adapters RJ45 to DB9 cable adapter
PortServer TS, Digi Connect, and Digi One Products Cable Guide 10
RJ45 to DB9 cable adapter
* Arrows indicate which direction the signal is flowing.
This cable can be purchased from Digi:
nDB9F Console Adapter: part #76000697
Notes:
nAll RJ45 cable adapters are 8-pin.
nAltpin should be turned on when using this cable adapter so that DTR will drive DCD (standard
usage).
nIf altpin is turned off, the hardware signal on RJ45 pin 1 becomes DSR instead of DCD. This
alternative can be used if DCD is not required, and DSR is needed instead.
nThis cable adapter utilizes the RTS signal of the serial device for hardware flow control
(RTS/CTS).
From Signal Direction Signal To nu- RJ-45 )5 1 DO) (— DTR 20 2 RTS —) crs 5 3 Ground 4-) Ground Shell 4 TxD —) RxD 3 5 mm (— TxD 2 6 so 6 SG 7 7 crs (— RTS 4 a DTR DSR 6 IE: DCD 8 Flnl nu nuanuwon O L—. Female R145 31in Female DEV-ZS E 3 E 3 Gable Adapter not no sale
DB9 and DB25 DTE/console/terminal/printer adapters RJ45 to DB25F cable adapter
PortServer TS, Digi Connect, and Digi One Products Cable Guide 11
RJ45 to DB25F cable adapter
* Arrows indicate which direction the signal is flowing.
This cable can be purchased from Digi:
nDB25F Console Adapter: part #76000699
Notes:
nAll RJ45 cable adapters are 8-pin.
nAltpin should be turned on when using this cable adapter so that DTR will drive DCD (standard
usage).
nIf altpin is turned off, the hardware signal on RJ45 pin 1 becomes DSR instead of DCD. This
alternative can be used if DCD is not required, and DSR is needed instead.
nThis cable adapter utilizes the RTS signal of the serial device for hardware flow control
(RTS/CTS).
From Slgnd Dlrectlun 5!ng To ”—45 DEE 1 DCD (— DTR 20 2 RTS —> crs 5 3 Ground 9 Gmund Shell 4 TxD —) Rm 3 5 RxD (— TxD 2 6 SG (-) SG 7 7 crs (— RTS 4 a DTR DSR 6 {I pm a Ph 1 Pl! I \ Fame nus 81in Male 0525 E 3 E 3 Gible Adapta’ notm sale
DB9 and DB25 DTE/console/terminal/printer adapters RJ45 to DB25M console adapter
PortServer TS, Digi Connect, and Digi One Products Cable Guide 12
RJ45 to DB25M console adapter
* Arrows indicate which direction the signal is flowing.
This cable can be purchased from Digi:
nDB25MConsole Adapter: part #76000698
Notes:
nAll RJ45 cable adapters are 8-pin.
nAltpin should be turned on when using this cable adapter so that DTR will drive DCD (standard
usage).
nIf altpin is turned off, the hardware signal on RJ45 pin 1 becomes DSR instead of DCD. This
alternative can be used if DCD is not required, and DSR is needed instead.
nThis cable adapter utilizes the RTS signal of the serial device for hardware flow control
(RTS/CTS).
rmm Sign-I Dllecflon signal To nu- RJ-45 25 1 DCD _) RTS 4 2 m —) crs 5 3 Gmmd (-) Ground Shell 4 Tm —) RxD 3 5 M (— TxD 2 6 SG 4-) SG 7 7 crs {— DTR 20 8 DTR DSR 6 'E: DCD s \ renal: RHS s-un Male 05-25 Z 3 E 3 Cable Adana not to scale
DB9 and DB25 DTE/console/terminal/printer adapters RJ45 to DB25M printer adapter
PortServer TS, Digi Connect, and Digi One Products Cable Guide 13
RJ45 to DB25M printer adapter
* Arrows indicate which direction the signal is flowing.
Notes:
nAll RJ45 cable adapters are 8-pin.
nFor use with Printers. This adapter utilizes the DTR signal of the serial device (instead of RTS)
for hardware flow control (RTS/CTS).
nOkidata printers may use SSD (pin 11) instead of DTR (pin 20) on DB25 side of above diagram. If
this is the case, the printer should be set to SSD+.
nAltpin should be turned on when using this cable so that DTR will drive DCD (standard usage).
nIf altpin is turned off, the hardware signal on RJ45 pin 1 becomes DSR instead of DCD. This
alternative can be used if DCD is not required, and DSR is needed instead.
3%ng 35%? Egg? 3%? Eyggyggya
DB9 and DB25 DTE/console/terminal/printer adapters RJ45 to DB25M modem adapter
PortServer TS, Digi Connect, and Digi One Products Cable Guide 14
RJ45 to DB25M modem adapter
* Arrows indicate which direction the signal is flowing.
This cable can be purchased from Digi:
nDB25M Modem Adapter: part #76000700
Notes:
nAll RJ45 cable adapters are 8-pin.
nWhen using this adapter with a modem or other applications that require DCD on pin 1, you
must turn on altpin.
nIf altpin is turned off, the hardware signal on pin 1 becomes DSR instead of DCD.
nThis cable utilizes the CTS signal of the modem for hardware flow control (RTS/CTS).
DB9 DTE/console/terminal/printer cables
RJ45 to DB9F terminal emulator cable 16
RJ45 (Altpin on) to DB9F terminal emulator cable 17
RJ45 10-pin to DB9F terminal emulator cable 18
RJ45 (Altpin on) to DB9M terminal/printer cable 19
RJ45 to DB9M terminal/printer cable 20
PortServer TS, Digi Connect, and Digi One Products Cable Guide 15
5 1 9 S Fermlo Signal Direction Signal From RJ-4S hwmvhfimv ESE fifififihfififi Eng? Connectors no! to sue
DB9 DTE/console/terminal/printer cables RJ45 to DB9F terminal emulator cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 16
RJ45 to DB9F terminal emulator cable
* Arrows indicate which direction the signal is flowing.
Notes:
nAltpin should be turned off when using this cable so that pin 1 becomes DSR instead of DCD.
This alternative can be used if DCD is not required, and DSR is needed instead.
nThis cable utilizes the RTS signal of the PC terminal emulator for hardware flow control
(RTS/CTS).
From M45 [T GND (-p GND Shell [T TxD —) RxD 2 WWTWW IT so (-) SG 5 [T CTS (— RTS 7 WWTWW [T RTS —) CTS 8 IT DTR —) DSR 6 Signal Direction Signal Ta 084) B 1 FRONT g a: RJ-45 B-Pin :: Comet-Jars noun scde
DB9 DTE/console/terminal/printer cables RJ45 (Altpin on) to DB9F terminal emulator cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 17
RJ45 (Altpin on) to DB9F terminal emulator cable
* Arrows indicate which direction the signal is flowing.
Notes:
nAltpin should be turned on when using this cable so that DTR will drive DCD (standard usage).
nIf altpin is turned off, the hardware signal on RJ45 pin 1 becomes DSR instead of DCD. This
alternative can be used if DCD is not required, and DSR is needed instead.
nThis cable utilizes the RTS signal of the PC terminal emulator for hardware flow control
(RTS/CTS).
‘01 FRONT: E RJ-45 1D-Pin :/ Oonnecuws notlo scde
DB9 DTE/console/terminal/printer cables RJ45 10-pin to DB9F terminal emulator cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 18
RJ45 10-pin to DB9F terminal emulator cable
* Arrows indicate which direction the signal is flowing
This cable can be purchased from Digi:
n4' RJ-45 to DB9 Male Crossover: part #76000264
This cable can be purchased from Digi:
n4' RJ-45 to DB9F crossover: part #76000645
Notes:
nAltpin should be turned off when using this cable.
nThis cable utilizes the RTS signal of the PC terminal emulator for hardware flow control
(RTS/CTS).
1 5 5 9 Male DB-Q I L_HM:E Connecbrs no! lo soda E 1 FRONT E RJ 45 8-Pln EH. w E; rrmmmmmmmm Egg: mWWVWWerW To DB-‘J Shell Slgnal rectum gnal
DB9 DTE/console/terminal/printer cables RJ45 (Altpin on) to DB9M terminal/printer cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 19
RJ45 (Altpin on) to DB9M terminal/printer cable
* Arrows indicate which direction the signal is flowing.
Notes:
nAltpin should be turned on when using this cable so that DTR will drive DCD (standard usage).
nIf altpin is turned off, the hardware signal on RJ45 pin 1 becomes DSR instead of DCD. This
alternative can be used if DCD is not required, and DSR is needed instead.
nThis cable utilizes the DTR signal of the terminal/printer for hardware flow control (RTS/CTS).
nEIA-232 cables cannot exceed 2500 pF.
1 5 S 9 Male DB-B B 1 FRONT. g RJ-45 8-Pin To DB—‘J Signul Signal ‘ ' Dlrcclwn WWWWW WWWW 2 From RJ-4S Wlfielfi 3 Connemrs not to some IE —/ 1: HUGE WWW.» @175 firm WWW“, (— —) IT
DB9 DTE/console/terminal/printer cables RJ45 to DB9M terminal/printer cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 20
RJ45 to DB9M terminal/printer cable
* Arrows indicate which direction the signal is flowing.
Notes:
nAltpin should be turned off when using this cable so that pin 1 becomes DSR instead of DCD.
This alternative can be used if DCD is not required, and DSR is needed instead.
nThis cable utilizes the DTR signal of the terminal/printer for hardware flow control (RTS/CTS).
DB25 DTE/console/terminal/printer cables
RJ45 (Altpin on) to DB25F terminal emulator cable 22
RJ45 10-pin to DB25F terminal emulator cable 23
RJ45 to DB25M terminal/printer cable 24
RJ45 10-pin to DB25M terminal/printer cable 25
PortServer TS, Digi Connect, and Digi One Products Cable Guide 21
Fm" Signal Direction Signal To DB-ZS “-45 B I W W T W W aw 0—0 _ ' 25 I4 5 RxD (— m) [T RJ458-Pln FemaleDB—Zs 8 1m 1W!f — EQE’W : 1 W a $ 1 3 GND 0 GND Shell Connectors no! la suie
DB25 DTE/console/terminal/printer cables RJ45 (Altpin on) to DB25F terminal emulator cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 22
RJ45 (Altpin on) to DB25F terminal emulator cable
* Arrows indicate which direction the signal is flowing.
Notes:
nAltpin should be turned on when using this cable so that DTR will drive DCD (standard usage).
nIf Altpin is turned off, the hardware signal on RJ45 pin 1 becomes DSR instead of DCD. This
alternative can be used if DCD is not required, and DSR is needed instead.
From Signal Dinclilm Signal To 113—25 RJ—4S '10 ‘DCD :I— DTR 20 2 DSR a RxD (— 1O 1 FRONT HE RJ-45 10-Fin 5 Femala DB—25 TV a 7 [SC | (—) i G ; 7 I—WITIWI— Wfilflfili Weill) (-) GN'D Shell TxD 2 s TxD —) RxD 3 [Wyi DCD s o HIHHII fl Connectors no! 10 same
DB25 DTE/console/terminal/printer cables RJ45 10-pin to DB25F terminal emulator cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 23
RJ45 10-pin to DB25F terminal emulator cable
* Arrows indicate which direction the signal is flowing.
This cable can be purchased from Digi:
n4' RJ-45 to DB25 Male Crossover: part #76000238
Notes:
nAltpin should be turned off when using this cable.
nThis cable utilizes the RTS signal of the PC terminal emulator for hardware flow control
(RTS/CTS).
Signal Erection Signal To DILZS a 1 FRONY: E O ouoooooooooo 000000000000 0 DSR (— RTS 4 _ [TyfiyTyfiyT ““5”” ” We —) mm 3 6 WWWWW “SE 2/ \RTs \ —) \Crs \ 5 CTS (— DTR 2° Cannecmrs nol lo scde "L
DB25 DTE/console/terminal/printer cables RJ45 to DB25M terminal/printer cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 24
RJ45 to DB25M terminal/printer cable
* Arrows indicate which direction the signal is flowing.
Notes:
nAltpin should be turned on when using this cable so that DTR will drive DCD (standard usage).
nIf altpin is turned off, the hardware signal on RJ45 pin 1 becomes DSR instead of DCD. This
alternative can be used if DCD is not required, and DSR is needed instead.
nThis cable utilizes the DTR signal of the terminal/printer for hardware flow control (RTS/CTS).
nOkidata printers may use SSD (pin 11) instead of DTR (pin 20) on DB25 side of above diagram. If
this is the case, the printer should be set to SSD+.
Mala D525 1O 1 FRONT: E RJ-4510—Fin ' Connecmrs not to soda or WWW|W:_: WWWWWW WEE WWWWWF WW ‘zwrF
DB25 DTE/console/terminal/printer cables RJ45 10-pin to DB25M terminal/printer cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 25
RJ45 10-pin to DB25M terminal/printer cable
* Arrows indicate which direction the signal is flowing.
This cable can also be purchased from Digi (part: RJ-45 10-pin to DB-25 - Part #76000238)
Notes:
nAltpin should be turned off when using this cable.
nThis cable utilizes the DTR signal of the terminal/printer for hardware flow control (RTS/CTS).
nOkidata printers may use SSD (pin 11) instead of DTR (pin 20) on DB25 side of above diagram. If
this is the case, the printer should be set to SSD+.
Digi-to-Digi Cables
Async RJ45 to RJ45 crossover cable - for cross-connecting Digi asynchronous ports together 27
RJ45 to DB9M modem adapter 28
PortServer TS, Digi Connect, and Digi One Products Cable Guide 26
From 8 mg ““5 Signnl Direction Signal “12;“ Digi l DSR {— DTR 5 RxD (— TxD 4 4 TxD —) RxD 5 s DTR —) DSR 1 °° 6 so 4-) so 5 2 RTS —) crs 7 7 CTS {— RTS 2 RJ-45 B-Pin a 1 WE RJ-45 8-Pin canmcbrs not to sue l
Digi-to-Digi Cables Async RJ45 to RJ45 crossover cable - for cross-connecting Digi asynchronous ports together
PortServer TS, Digi Connect, and Digi One Products Cable Guide 27
Async RJ45 to RJ45 crossover cable - for cross-connecting Digi
asynchronous ports together
* Arrows indicate which direction the signal is flowing.
Fran Synl Dilect'nn Signal To an l Pm I \ ”.45 D” L. . n . ‘ _ (— Q e DSR 6 Femde R145 Ma! 03-9 2 RTS —) RTS 7 WI! 3 Ground 4-) Ground Shell l——::|1 4 TxD —) TxD 3 5 RxD (— mo 2 6 SG (9 SG 5 K 7 crs (— crs e [—353 8 DTR _) 01R 4 Cable Adapter nd tn scde
Digi-to-Digi Cables RJ45 to DB9M modem adapter
PortServer TS, Digi Connect, and Digi One Products Cable Guide 28
RJ45 to DB9M modem adapter
* Arrows indicate which direction the signal is flowing.
This cable can be purchased from Digi:
nDB9MModem Adapter: part #76000701
Notes:
nAll RJ45 cable adapters are 8-pin.
nWhen using this adapter with a modem or other applications that require DCD on pin 1, you
must turn on altpin.
nIf altpin is turned off, the hardware signal on pin 1 becomes DSR instead of DCD.
nThis cable utilizes the CTS signal of the modem for hardware flow control (RTS/CTS).
DB25 and DB9 modem cables
RJ45 (Altpin on) to DB25M modem cable 30
RJ45 (Altpin on) to DB9M modem cable 31
RJ45 10-pin to DB9M modem cable 32
RJ45 10-pin to DB9F modem cable 33
RJ45 10-pin to DB25M modem cable 34
RJ45 10-pin to DB25F modem cable 35
PortServer TS, Digi Connect, and Digi One Products Cable Guide 29
Fram M45 filififili WITliIWfi Signal Direclitm Signal Tn DB—ZS ”5 HT 5 a q a % B 1 FRONT E RJ-45 8—Pin Male DB-25 E ¢ E TS T 111:9 3%? w W3 W ND Shell B 1 :/ Oonrlechors nollo suie “ |
DB25 and DB9 modem cables RJ45 (Altpin on) to DB25M modem cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 30
RJ45 (Altpin on) to DB25M modem cable
The table shows the wiring diagram for an EIA-232 RJ45 8-pin connector, with Altpin on, to a DB25
modem cable.
* Arrows indicate which direction the signal is flowing.
Notes:
nAltpin should be turned on when using this cable.
nThis cable utilizes the CTS signal of the modem for hardware flow control (RTS/CTS).
Frum M45 1 DCD (— DCD 1 s RxD (— mm 2 4 TxD —) TxD 3 {T {W I? {W If lirccfinn To DB—9 Signal Signal E 1 FRONT E RJ-45 B-Pin WWWWW jg —/ ‘2 [RTS‘ —) ‘RTS‘ 7 WWWIGN—DW Conneclnrs no! to was
DB25 and DB9 modem cables RJ45 (Altpin on) to DB9M modem cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 31
RJ45 (Altpin on) to DB9M modem cable
The table shows the wiring diagram for an EIA-232 RJ45 8-pin connector, with Altpin on, to a DB9
modem cable.
* Arrows indicate which direction the signal is flowing.
Notes:
nAltpin should be turned on when using this cable.
nThis cable utilizes the CTS signal of the modem for hardware flow control (RTS/CTS).
me Signal Directim Signal To DB-9 [$myflfifi "W Egg [TWITWIT RJ-45 10-Pin Conmcbrs nol lo sue
DB25 and DB9 modem cables RJ45 10-pin to DB9M modem cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 32
RJ45 10-pin to DB9M modem cable
* Arrows indicate which direction the signal is flowing.
This cable can be purchased from Digi:
n4' RJ-45 to DB9 Male straight: part #76000240
Notes:
nAltpin should be turned off when using this cable.
nThis cable utilizes the CTS signal of the modem for hardware flow control (RTS/CTS).
F mm R145 [Tom (— DC!) I [TWITWIT FWWWW [TWITW'T [TWW'TIT WWTWW ITIWITIWIf Was (— CTS s lI—ITITITIT [Tenn (9 GND su Directinn 'I'o DB-9 Sign-l Signal 101 WWW 9 RJ-45 10-Pin 3:] Conmcbn noun Ema
DB25 and DB9 modem cables RJ45 10-pin to DB9F modem cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 33
RJ45 10-pin to DB9F modem cable
* Arrows indicate which direction the signal is flowing.
This cable can be purchased from Digi:
n4' RJ-45 to DB9 Female straight: part #76000201
Notes:
nAltpin should be turned off when using this cable.
nThis cable utilizes the CTS signal of the modem for hardware flow control (RTS/CTS).
Male 03-25 1 RJ-45 10-Pin Oonmcbrs not to me
DB25 and DB9 modem cables RJ45 10-pin to DB25M modem cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 34
RJ45 10-pin to DB25M modem cable
* Arrows indicate which direction the signal is flowing.
This cable can be purchased from Digi:
n4' RJ-45 10-pin to DB25 Male Straight: part #76000195
Notes:
nAltpin should be turned off when using this cable.
nThis cable utilizes the CTS signal of the modem for hardware flow control (RTS/CTS).
Female 03-25 Oonmcbrs not to me
DB25 and DB9 modem cables RJ45 10-pin to DB25F modem cable
PortServer TS, Digi Connect, and Digi One Products Cable Guide 35
RJ45 10-pin to DB25F modem cable
* Arrows indicate which direction the signal is flowing.
This cable can be purchased from Digi:
n4' RJ-45 10-pin to DB25 Male Straight: part #76000199
Notes:
nAltpin should be turned off when using this cable.
nThis cable utilizes the CTS signal of the modem for hardware flow control (RTS/CTS).
Specialty cables
Cisco console cables 37
PortServer TS, Digi Connect, and Digi One Products Cable Guide 36
Tablt l: BIA—131 Altpin ”-45 In RJ—AS From . . . . Tn R145 nus smm Dlmclmn S-unnl Cim 1 DCD (— DTR 2 FRONT 5 1 FRO l’ 3 1 s RxD {— TxD 3 lg! N g RJ-45 B-Pin RJ-45 4 TxD —> MD 6 x UI'R —> DSR 7 s so (-> so 5 ”E l I x— l 2 RTS —> TS s C Cannecmrs nal lo scae 7 CTS (— RTS 1 3 GND <-> GND 4
Specialty cables Cisco console cables
PortServer TS, Digi Connect, and Digi One Products Cable Guide 37
Cisco console cables
Digi RJ45 to RJ45 cable adapters: 8-pin
RJ45 to RJ45 cable adapters can be purchased from Digi. These adapters consist of an 8-pin RJ45 plug
connected to another 8-pin RJ45 plug with a crossover cable. These cables are used to connect the
Digi devices to the serial console port of Cisco and Sun Netra devices. Pinout information and a
graphic is included later in this chapter. See Digi RJ45 to RJ45 cable adapters: 8-pin for pinout and
graphic information.
Part numbers for RJ45 to RJ45 8-pin crossover cable for Cisco & Sun Netra
Cable description Part # Cable identifier
Cable RJ45 to RJ45 8-pin (single pack) 76000631 63000222-02
RJ45 (Altpin On) to RJ45 Cisco console adapter
The wiring diagram for an Altpin RJ-45 8-pin to a Cisco Console RJ-45 8-pin adapter cable is shown in
the following table.
* Arrows indicate which direction the signal is flowing.
This cable can be purchased from Digi:
n6' RJ-45 to RJ-45 for Sun Netra/Cisco: part #76000631
Notes:
Specialty cables Cisco console cables
PortServer TS, Digi Connect, and Digi One Products Cable Guide 38
nWorks for most current Cisco routers.
nBe careful not to swap cable ends. One end will go to DIGI and the other to the router.
nAltpin should be turned on when using this cable.

Products related to this Datasheet

CABLE STRAIGHT 4' RJ-45/DB-9M
Available Quantity: 863
Unit Price: 43
CABLE STRAIGHT 4' RJ-45/DB-25M
Available Quantity: 276
Unit Price: 43
NETWORKING ADAPTER CABLE RJ45 6'
Available Quantity: 258
Unit Price: 29.53
CABLE CROSSOVER 4' RJ-45/DB-9F
Available Quantity: 90
Unit Price: 39.09
CABLE CROSSOVER 4' RJ-45/DB-9M
Available Quantity: 69
Unit Price: 39.09
CABLE STRAIGHT 4' RJ-45/DB-9F
Available Quantity: 60
Unit Price: 39.09
NETWORKING ADAPTER DB9M 4 PK
Available Quantity: 24
Unit Price: 40.54
NETWORKING CONN BOX 8PT DB9M
Available Quantity: 22
Unit Price: 164.5
CABLE CROSSOVER 4' RJ-45/DB-25M
Available Quantity: 16
Unit Price: 39.09
NETWORKING ADAPTER DB9F 1=4PCS
Available Quantity: 15
Unit Price: 53.57
NETWORKING ADAPTER DB25M 4 PK
Available Quantity: 11
Unit Price: 40.54
NETWORKING CONN BOX 4PT DB9M
Available Quantity: 10
Unit Price: 122.36
CABLE STRAIGHT 2' RJ-45/DB-25M
Available Quantity: 0
Unit Price: 0
CABLE STRAIGHT 2' RJ-45/DB-25F
Available Quantity: 0
Unit Price: 0
CABLE STRAIGHT 2' RJ-45/DB-9F
Available Quantity: 0
Unit Price: 0
CABLE STRAIGHT 2' RJ-45/DB-9M
Available Quantity: 0
Unit Price: 0
NETWORKING ADAPTR ETHERLITE 4PCS
Available Quantity: 0
Unit Price: 0
NETWORKING CABLE MODEM RJ45 4'
Available Quantity: 0
Unit Price: 0
NETWORKING CABL RJ45M SUN 6' 8PK
Available Quantity: 0
Unit Price: 0
NETWORKING ADAPTER CABLE 6' 16PK
Available Quantity: 0
Unit Price: 0