A3U Series Datasheet by Omron Automation and Safety

View All Related Products | Download PDF Datasheet
omRon H ”I n u E“ \ \ a D D D D D I
1
New Product
Plateau Head Pushbutton Switch
A3U
Easy connector enables less assembly and less wiring
Model Number Structure
Ordering Information
Plateau Head Pushbutton Switches
Degree of Protection : IP40
Flange Color: Black Flange Color: Metallic
Highly reliable Major Omron basic switch, SS model built in.
Possible cross over wiring on circuit construction.
Easy one push to connect the Operation and Switch Units.
22 dia of the push button head size is suitable for operation.
A3U -T - A C- M
(2)(
3)(
4)(
5)(
6)(1)
(3) Color of Pushbutton and Light
Symbol Color Lighted
(Cap type/Color)
Non-Lighted
(Cap type/Color)
W White Transparent Cap/White Non-Transparent Cap/White
SWhite Transparent Cap/White
R Red Transparent Cap/Red Transparent Cap/Red
Y Yellow Transparent Cap/Yellow Transparent Cap/Yellow
G Green Transparent Cap/Green Transparent Cap/Green
U Umber Transparent Cap/White
A Blue Transparent Cap/Blue Transparent Cap/Blue
BBlack Non-Transparent Cap/Black
KBlack Transparent Cap/Black
(2) Flange Color
Symbol Color
BBlack
M Metallic
(5) Contact Configuration
Symbol Type
1 SPDT
2DPDT
(1) Lighted/Non-lighted
Symbol Type
No symbol Non-lighted
LLighted
(4) Voltage Used (LED)
Symbol Operating Voltage
No symbol Non-lighted
15 VDC
212 VDC
324 VDC
(6) Degree of Protection
Symbol Protection
None IP40
5 IP65 (Oil-proof type)
Model Number Legend....For information on combinations, refer to Ordering Information.
Lighting Output LED
Voltage Model @Pushbutton
color symbol
LED
SPDT
5 VDC A3UL-TB@-1A1C-M
W, A
12 VDC A3UL-TB@-2A1C-M
24 VDC A3UL-TB@-3A1C-M
DPDT
5 VDC A3UL-TB@-1A2C-M
12 VDC A3UL-TB@-2A2C-M
24 VDC A3UL-TB@-3A2C-M
SPDT
5 VDC A3UL-TBG-1A1C-M
G12 VDC A3UL-TBG-2A1C-M
24 VDC A3UL-TBG-3A1C-M
5 VDC A3UL-TBU-1A1C-M-S
U12 VDC A3UL-TBU-2A1C-M-S
24 VDC A3UL-TBU-3A1C-M-S
DPDT
5 VDC A3UL-TBG-1A2C-M
G12 VDC A3UL-TBG-2A2C-M
24 VDC A3UL-TBG-3A2C-M
5 VDC A3UL-TBU-1A2C-M-S
U12 VDC A3UL-TBU-2A2C-M-S
24 VDC A3UL-TBU-3A2C-M-S
SPDT
5 VDC A3UL-TB@-1A1C-M
R, Y
12 VDC A3UL-TB@-2A1C-M
24 VDC A3UL-TB@-3A1C-M
DPDT
5 VDC A3UL-TB@-1A2C-M
12 VDC A3UL-TB@-2A2C-M
24 VDC A3UL-TB@-3A2C-M
Non-
lighted
SPDT A3U-TB@-A1C-M
W, S, R, Y,
G, A, B, K
DPDT A3U-TB@-A2C-M
Lighting Output LED
Voltage Model @Pushbutton
color symbol
LED
SPDT
5 VDC A3UL-TM@-1A1C-M
W, A
12 VDC A3UL-TM@-2A1C-M
24 VDC A3UL-TM@-3A1C-M
DPDT
5 VDC A3UL-TM@-1A2C-M
12 VDC A3UL-TM@-2A2C-M
24 VDC A3UL-TM@-3A2C-M
SPDT
5 VDC A3UL-TMG-1A1C-M
G12 VDC A3UL-TMG-2A1C-M
24 VDC A3UL-TMG-3A1C-M
5 VDC A3UL-TMU-1A1C-M-S
U12 VDC A3UL-TMU-2A1C-M-S
24 VDC A3UL-TMU-3A1C-M-S
DPDT
5 VDC A3UL-TMG-1A2C-M
G12 VDC A3UL-TMG-2A2C-M
24 VDC A3UL-TMG-3A2C-M
5 VDC A3UL-TMU-1A2C-M-S
U12 VDC A3UL-TMU-2A2C-M-S
24 VDC A3UL-TMU-3A2C-M-S
SPDT
5 VDC A3UL-TM@-1A1C-M
R, Y
12 VDC A3UL-TM@-2A1C-M
24 VDC A3UL-TM@-3A1C-M
DPDT
5 VDC A3UL-TM@-1A2C-M
12 VDC A3UL-TM@-2A2C-M
24 VDC A3UL-TM@-3A2C-M
Non-
lighted
SPDT A3U-TM@-A1C-M
W, S, R, Y,
G, A, B, K
DPDT A3U-TM@-A2C-M
A3U
2
Degree of Protection : IP65 (Oil-proof Type)
Flange Color: Black Flange Color: Metallic
Accessories and Tools (Sold Separately)
Accessories
Tools
Lighting Output LED
Voltage Model @Pushbutton
color symbol
LED
SPDT
5 VDC A3UL-TB@-1A1C-5M
W, A
12 VDC A3UL-TB@-2A1C-5M
24 VDC A3UL-TB@-3A1C-5M
DPDT
5 VDC A3UL-TB@-1A2C-5M
12 VDC A3UL-TB@-2A2C-5M
24 VDC A3UL-TB@-3A2C-5M
SPDT
5 VDC A3UL-TBG-1A1C-5M
G12 VDC A3UL-TBG-2A1C-5M
24 VDC A3UL-TBG-3A1C-5M
5 VDC A3UL-TBU-1A1C-5M-S
U12 VDC A3UL-TBU-2A1C-5M-S
24 VDC A3UL-TBU-3A1C-5M-S
DPDT
5 VDC A3UL-TBG-1A2C-5M
G12 VDC A3UL-TBG-2A2C-5M
24 VDC A3UL-TBG-3A2C-5M
5 VDC A3UL-TBU-1A2C-5M-S
U12 VDC A3UL-TBU-2A2C-5M-S
24 VDC A3UL-TBU-3A2C-5M-S
SPDT
5 VDC A3UL-TB@-1A1C-5M
R, Y
12 VDC A3UL-TB@-2A1C-5M
24 VDC A3UL-TB@-3A1C-5M
DPDT
5 VDC A3UL-TB@-1A2C-5M
12 VDC A3UL-TB@-2A2C-5M
24 VDC A3UL-TB@-3A2C-5M
Non-
lighted
SPDT A3U-TB@-A1C-5M
W, S, R, Y,
G, A, B, K
DPDT A3U-TB@-A2C-5M
Lighting Output LED
Voltage Model @Pushbutton
color symbol
LED
SPDT
5 VDC A3UL-TM@-1A1C-5M
W, A
12 VDC A3UL-TM@-2A1C-5M
24 VDC A3UL-TM@-3A1C-5M
DPDT
5 VDC A3UL-TM@-1A2C-5M
12 VDC A3UL-TM@-2A2C-5M
24 VDC A3UL-TM@-3A2C-5M
SPDT
5 VDC A3UL-TMG-1A1C-5M
G12 VDC A3UL-TMG-2A1C-5M
24 VDC A3UL-TMG-3A1C-5M
5 VDC
A3UL-TMU-1A1C-5M-S
U12 VDC
A3UL-TMU-2A1C-5M-S
24 VDC
A3UL-TMU-3A1C-5M-S
DPDT
5 VDC A3UL-TMG-1A2C-5M
G12 VDC A3UL-TMG-2A2C-5M
24 VDC A3UL-TMG-3A2C-5M
5 VDC
A3UL-TMU-1A2C-5M-S
U12 VDC
A3UL-TMU-2A2C-5M-S
24 VDC
A3UL-TMU-3A2C-5M-S
SPDT
5 VDC A3UL-TM@-1A1C-5M
R, Y
12 VDC A3UL-TM@-2A1C-5M
24 VDC A3UL-TM@-3A1C-5M
DPDT
5 VDC A3UL-TM@-1A2C-5M
12 VDC A3UL-TM@-2A2C-5M
24 VDC A3UL-TM@-3A2C-5M
Non-
lighted
SPDT A3U-TM@-A1C-5M
W, S, R, Y,
G, A, B, K
DPDT A3U-TM@-A2C-5M
Accessory Appearance Type Model number Remarks
Panel Plug
Round
A22Z-3530
Used to plug a panel cutout hole for fu-
ture expansion.
Do not use it on a panel cutout hole that
will be used to position a Switch and en-
sure that the Switch will not rotate. Use
this Plug for a 25-dia. panel cutout hole.
Refer to page 6 for information on panel
cutout holes.
The color is black.
25-dia. Ring A22Z-R25 Used together with a Panel Plug.
Cap Removal Suction
Cup A3UZ-3010 Used to remove a cap.
Harness A3UZ-5010-10 Used to connect to a connector.
Lead length: 1 m
Tool Appearance Type Model number Remarks
Tightening Tool A22Z-3905
Used to tighten nuts from the back of
the panel and to replace caps on Light-
ed Emergency Stop Switches.
I
A3U
3
Specifications
Approved Standard Ratings
Note: 1. Only Switch Blocks are recognized by UL/CSA. (Surrounding air Temperature: 55 °C)
Note: 2. Please use the power supply specified in UL/CSA class 2.
Note: 3. Use 4A 250V as short-circuit protective device when using under EN-compliant rating standard (IEC60127-2 SS1).
Ratings
Characteristics Operating Characteristics
Circuit Diagram
Certification Authority UL (See Note: 1 and Note: 2) CSA (See Note: 1 and Note: 2) TÜV (See Note: 3)
Certification no. UL508
CSA C22.2 No.14 CSA C22.2 No. 14 EN60947-5-1
Rating 30 VDC 0.1 A 30 VDC 0.1 A 12 30 VDC 0.1 A
File no. E41515 2650068 J50236157
Contacts
30 VDC, 0.1 A (Resistive load)
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20 ± 2 °C
4. Operating frequency: 20 operations/min
Super-bright LED
Rated voltage Rated current Operating voltage
5 VDC
15 mA
5 VDC ± 5 %
12 VDC 12 VDC ± 5 %
24 VDC 24 VDC ± 5 %
Item Pushbutton Switch
Allowable
operating
frequency
Mechanical 60 operations/minute max.
Electrical 30 operations/minute max.
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance 250 mΩ max. (initial value)
Dielectric
strength
Between terminals of
same polarity
500 VAC, 50/60 Hz for 1 minute
Between terminals of
different polarity
500 VAC, 50/60 Hz for 1 minute
Between each
terminal and ground
1,500 VAC, 50/60 Hz for 1 minute
Between all LED terminals
and all the other terminals
500 VAC, 50/60 Hz for 1 minute
Vibration
resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude
(malfunction within 1 ms)
Shock
resistance Malfunction 300 m/s2 max. (malfunction within 1 ms)
Durability Mechanical 1,000,000 operations min.
Electrical 200,000 operations min.
Connector holding force 40 N max.
Rated insulation voltage (Ui) 30 V (EN60947-5-1)
Electric shock protection class Class II
Degree of contamination 3 (EN60947-5-1)
Impulse
withstand
voltage
Between terminals of
same polarity
Between terminals of
different polarity
Between each
terminal and ground
800 V (EN60947-5-1)
Conditional short-circuit current 100A (EN60947-5-1)
Conventional enclosed thermal
current (Ithe) 0.1A (EN60947-5-1)
Weight Approx. 30 g
Degree of protection IP40, IP65 (Oil-proof type)
Ambient operating temperature
-20 °C to 70 °C (Non-lighted type)
-20 °C to 55 °C (lighted type)
(with no icing or condensation)
Ambient operating humidity 35 % to 85 % RH
Ambient storage temperature -40 °C to 70 °C
(with no icing or condensation)
Ambient storage humidity 35 % to 85 % RH
Features A3U
Operating force (OF) max. 4.5 N
Pretravel (PT) max. 3.3 mm
Total travel (TT) max. 3.7 mm
TOP VIEW
CN
1
3
2
5
9
10
7
6
4
8
LED
R
SW1
SW2
Note3
1. This circuits shows the lighted/bipolar type.
2. SW2 isn't mounted on 1 pole type.
3. An LED and R aren't mounted on the non-lighted type.
I
A3U
4
Dimensions (unit: mm)
Safety Precautions
Refer to Safety Precautions for All Pushbutton Switches/Indicators.
Do not disassemble or modify the Switch under any
circumstances. Doing so may cause malfunction.
Do not drop or subject the Switch to extreme shock or force.
This may prevent the Switch from functioning to its full capability.
The durability of the Switch varies considerably depending on the
switching conditions. Always test the switch under actual working
conditions before application and use the Switch only for the
number of switching operations allowed.
Do not allow the load current to exceed the rated value. This may
damage or burn out the Switch.
Refer to the Circuit Diagram and make sure to wire correctly. Only
the terminal (1) is printed and the right end of the terminal is read
as (10).
Do not use the Switch in locations where explosive or flammable
gases or liquid may be present or scattered. The electric ark or the
heat caused by switching contacts may trigger off a fire or
explosion.
Do not use the Switch in locations where toxic gases, such as H2S,
SO2, NH3, HNO3, and Cl2, may be present, or in locations subject
to high temperature or humidity. Doing so may damage the Switch
due to contact failure or corrosion.
Do not let the Switch submerged in oil or water, or use in locations
continuously subject to splashes of oil/water. Doing so may result
in oil or water entering the Switch.
Do not use the Switch in the following locations;
- subject to severe temperature changes.
- subject to high humidity or condensation.
- subject to severe vibration or shock.
- where direct rays of the sun strike.
- where sea breeze may be present.
When the Switch is exposed to the environment that are not
required, or stored in locations where condensation presents, or
damaged by fall out, or stored for more than an year, please test it
under the usage conditions before application.
Mounting and Removing the Switch
1. Insert the Operation Unit from the front of the panel, insert the
Lock Ring and Mounting Nut from the back of the panel, and
tighten the Mounting Nut. Then, attach the Switch Unit to the
Operation Unit.
2. For a Switch with IP65 protection, make sure that the rubber
washer is in place between the Operation Unit and the panel.
3. Align the Lock Ring with the slot on the case and insert it so that
the edge is flush with the panel.
4. Tighten the Mounting Nut to between 0.98 and 1.96 .
5. To mount the Switch Unit to the Operation Unit, align the the
triangle marks on the Operation Unit and Switch Unit and insert
the Switch Unit until it locks securely in place.
6. The push marks on both sides are only for removal. Do not push
them when you insert the Switch Unit into the Pushbutton Unit.
Otherwise, the Pushbutton Unit will be hooked incorrectly.
7. To remove the Switch, press the levers on both sides in the
direction indicated by PUSH marks. Applying too much force
may damage the Switch.
8. Remove the Switch Unit before you remove the Pushbutton Unit.
If you loosen the mounting nut while the Switch Unit is still
attached, you will damage the Pushbutton Unit.
22 dia.
29
2
46.8
49.8
17
1.8
30
Directionality display
( mark)
Marking
Switch unit
Pushbutton Unit Mouthing
nut
Lock ring
Lot. No.
Connector B10B-PASK (JST)
Terminal No.
28.2 dia.
A3U
Precautions for Safe Use
The switch back
Terminal (1) Triangle Mark
Lock Ring
Panel
Operation Unit
Rubber washer
Mounting Nut
Tab
Switch Unit
Lever
Precaulions for Correct Use OITIROFI
A3U
5
Wiring
1. Do not wire the Switch while power is being supplied. Doing so
may result in electric shock.
2. Make sure to insert the connector to the end. This may prevent
the Switch from functioning to its full capability.
3. Do not subject the Switch to an excessive force when wiring. Fix
the cables first to avoid the connector and cables from being
pulled with. Otherwise, the connector may be disassembled or
damaged, resulting in the contact damages.
4. Refer to specification of each connector or catalogue for details
of installing or wiring the terminal side of the connector.
Recommended connector;
Choose the applicable contact to the wire.
Attaching and Removing Caps and Legend Plungers
Removal
1) Use the A3UZ-3010 Cap Removal Suction Cup (sold
separately) to remove the cap.
2) After you remove the cap, you can remove the legend plunger
and engrave it.
You cannot remove the legend plungers from Switches with
IP65 protection.
Attachment
1) The legend plunger fits in only one direction. Align the tabs on
the legend plunger with the slots on the operation plunger and
press the cap onto the operation plunger.
2) Attach the cap, aligning the slots on the slot on the cap with the
tab on the operation plunger.
Character Films
1) In addition to engraving characters on legend plungers, you can
insert a character film to display characters.
Applicable Character Film Size
Thickness: 0.2 mm max.
Recommended material: Polyethylene
Note: A Character Film is not included with the product.
2)The following figure shows the tabs on the legend plunger that
are used to position the character film.
Manufacture Name Model Applicable lead wire
J.S.T. Mfg Co. Contact SPHD-002T-P0.5 AWG#28 to 24
SPHD-001T-P0.5 AWG#26 to 22
Housing PAP-10V-S AWG#28 to 22
Precautions for Correct Use
Too much tension
to the cables.
Appropriate force
to the cables.
Legend Plunger
Cap
Operation Plunger
Insert the legend plunger so that
the groove widths are lined up.
Operation Plunger
Cap
Protruding Portions
Cutout Portions
(Unit: mm)
Character film
Tabs for character
film positioning
I
A3U
6
Operating Environment
1. This Switch is intended for indoor use only. Do not use the
Switch outdoors.
2. Do not set the Switch in locations where powders, mud, or any
other substances may be piled, or subject to any splashes of oil
or water. Always test the switch under actual working conditions
before application.
3. The Switches with oil-resistant IP65 protection use NBR rubber
and are resistant to general cutting oils and cooling oils. Some
special oils, however, cannot be used with these Switches.
Contact your OMRON representative for details.
Mounting panels
1. Set mounting panel thickness to be 0.8 to 3.2 mm.
2. The panel dimension is set as below;
- The value in ( ) indicated below is the minimum value
suggested for easy detaching of the Switch.
- Minimum panel pitch is 30/32 mm. Consider the flexibility and
allowance of detaching and wiring, set the pitch to the
appropriate value.
- Leave some spaces for a finger between panels, so as to pinch
the levers.
- Place the panels in the same direction. Do not set the
connectors face to face for easy removal.
25.2±0.1 dia.
4-R0.5 max.
Cutout Hole for Positioning
and to Prevent Switch Rotation
2.4 0
-0.1
23.5 +0.1
0
25.2 dia.
+0.4
-0.1
(Unit: mm)
30 min.
(preferably 45 min.)
32 min.
(preferably 40 min.)
(Unit: mm)
Wrong setup : Right setup :
Connectors are too closely placed.
Same direction
Levers are too close and
cannot be pushed.
Some rooms for fingers to push.
Read and understand this catalog. Warranties. Limitation on Liability- Etc. Suitability of Use. Programmable Products. Performance Data. Change in Specifications. Errors and Omissions.
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have
any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing
by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE
PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL
SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products
or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election,
to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the
non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price
of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other
claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored,
installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or
unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system
assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in
writing, are not to be construed as an amendment or addition to the above warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is
not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system,
or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with
respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it
to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice
to change part numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be
assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to
confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
Authorized Distributor:
In the interest of product improvement,
specifications are subject to change without notice.
Cat. No. A224-E1-02
Printed in Japan
0115 (0413)
© OMRON Corporation 2013-2015 All Rights Reserved.
OMRON Corporation Industrial Automation Company
OMRON ELECTRONICS LLC
2895 Greenspoint Parkway, Suite 200
Hoffman Estates, IL 60169 U.S.A
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
Regional Headquarters
OMRON EUROPE B.V.
Wegalaan 67-69, 2132 JD Hoofddorp
The Netherlands
Tel: (31)2356-81-300/Fax: (31)2356-81-388
Contact: www.ia.omron.com
Tokyo, JAPAN
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China CSM_5_1_0217
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200

Products related to this Datasheet

SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 47.7
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 45.94
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 47.7
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 45.94
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 47.7
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 45.94
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 47.7
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 45.94
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 47.7
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 45.94
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 47.7
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 43.38
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 45.94
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 43.38
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 47.7
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 43.38
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 45.94
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 43.38
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 47.7
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 43.38
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 45.94
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 43.38
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 47.7
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 45.94
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 47.7
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 45.94
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 47.7
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 45.94
SWITCH PUSHBUTTON DPDT 0.1A 30V
Available Quantity: 0
Unit Price: 47.7
SWITCH PUSHBUTTON SPDT 0.1A 30V
Available Quantity: 0
Unit Price: 45.94