HMC524LC3B Datasheet by Analog Devices Inc.

View All Related Products | Download PDF Datasheet
ANALOG I: DEVICES anflgl E? 920 920 020 PACKAGE EASE GND E o\z E
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
1
HMC524LC3B
v03.0514
GaAs MMIC I/Q MIXER
22 - 32 GHz
General Description
FeaturesTypical Applications
The HMC524LC3B is a compact I/Q MMIC mixer
which can be used as either an Image Reject Mixer
or a Single Sideband Upconverter. The chip utilizes
standard Hittite mixer cells and a 90 degree hybrid
fabricated in a GaAs MESFET process. A low
frequency quadrature hybrid was used to produce
a 100 MHz USB IF output. This product is a much
smaller alternative to hybrid style Image Reject mixers
and single sideband upconverter assemblies. The
HMC524LC3B eliminates the need for wirebonding,
allowing the use of surface mount techniques.
Electrical Specifications, TA = +25 °C, IF= 100 MHz, LO = +17 dBm*
Parameter Min. Typ. Max. Units
Frequency Range, RF/LO 22 - 32 GHz
Frequency Range, IF DC - 4.5 GHz
Conversion Loss (As IRM) 10 13 dB
Image Rejection 18 20 dB
1 dB Compression (Input) +16 dBm
LO to RF Isolation 35 40 dB
LO to IF Isolation 20 30 dB
IP3 (Input) +20 dBm
Amplitude Balance ±0.5 dB
Phase Balance ±2.5 Deg
* Unless otherwise noted, all measurements performed as downconverter.
Functional Diagram
The HMC524LC3B is ideal for:
Point-to-Point Radios
Point-to-Multi-Point Radios & VSAT
Test Equipment & Sensors
Military End Use
Wide IF Bandwidth: DC - 4.5 GHz
Image Rejection: 20 dB
LO to RF Isolation: 45 dB
High Input IP3: +20 dBm
12 Lead 3x3mm SMT Package: 9mm²
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES [1935/ GE? RF FREQUENCY (6sz \/\ FREQUENCV (em.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
2
HMC524LC3B
v03.0514
GaAs MMIC I/Q MIXER
22 - 32 GHz
Conversion Gain vs. Temperature
Input P1dB vs. Temperature
Conversion Gain vs. LO Drive
Image Rejection vs. Temperature
Return Loss
Input IP3 vs. LO Drive
-20
-15
-10
-5
0
19 21 23 25 27 29 31 33 35
+25C
+85C
-40C
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
21 23 25 27 29 31 33
+13dBm
+15dBm
+17dBm
+19dBm
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
10
12
14
16
18
20
22
24
21 23 25 27 29 31 33
+25C
+85C
-40C
INPUT P1dB (dBm)
RF FREQUENCY (GHz)
0
5
10
15
20
25
30
35
40
21 23 25 27 29 31 33
+25C
+85C
-40C
IMAGE REJECTION (dB)
RF FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
21 23 25 27 29 31 33
RF
LO
RETURN LOSS (dB)
FREQUENCY (GHz)
0
5
10
15
20
25
30
21 23 25 27 29 31 33
LO = +13 dBm
LO = +15 dBm
LO = +17 dBm
LO = +19 dBm
INPUT IP3 (dBm)
RF FREQUENCY (GHz)
Data Taken As IRM With External IF Hybrid
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES [1935/ GE? RF FREQUENCY (6sz IF FREQUENCY ((3sz RF FREQUENCY (6sz
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
3
HMC524LC3B
v03.0514
GaAs MMIC I/Q MIXER
22 - 32 GHz
Isolations IF Bandwidth
Upconverter Performance
Conversion Gain vs. LO Drive
Amplitude Balance vs. LO Drive Phase Balance vs. LO Drive
Upconverter Performance
Sideband Rejection vs. LO Drive
-60
-50
-40
-30
-20
-10
21 22 23 24 25 26 27 28 29 30 31 32 33
ISOLATION (dB)
RF FREQUENCY (GHz)
LO/IF1
LO/RF RF/IF1
-30
-25
-20
-15
-10
-5
0
0.5 1 1.5 2 2.5 3 3.5 4 4.5
RETURN LOSS
CONVERSION GAIN
RESPONSE (dB)
IF FREQUENCY (GHz)
-3
-2
-1
0
1
2
3
21 23 25 27 29 31 33
LO = +13dBm
LO = +15dBm
LO = +17dBm
LO = +19dBm
AMPLITUDE BALANCE (dB)
RF FREQUENCY (GHz)
-20
-10
0
10
20
21 23 25 27 29 31 33
LO = +13dBm
LO = +15dBm
LO = +17dBm
LO = +19dBm
PHASE BALANCE (degrees)
RF FREQUENCY (GHz)
-20
-15
-10
-5
0
21 22 23 24 25 26 27 28 29 30 31 32 33
LO = +13dBm
LO = +15dBm
LO = +17dBm
LO = +19dBm
CONVERSION GAIN (dB)
RF FREQUENCY (GHz)
-50
-40
-30
-20
-10
0
21 23 25 27 29 31 33
LO = +13dBm
LO = +15dBm
LO = +17dBm
LO = +19dBm
SIDEBAND REJECTION (dBc)
RF FREQUENCY (GHz)
Data Taken As IRM With External IF Hybrid
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES RnflSv/ m ur BOTTOM VIEW 0.1IBL005 P'N '2 [ ] P|N1 *[Sflot‘lfla ‘0” 0,36 » .013 0.32 ‘1 w .009 [Hajj r r W \. ‘ U U U ‘ /PIN 1 ‘ — .022 [0,56] Bruno? H524 9 8;; [21% B ginw 0.44 3,001.13 - - 3 XXXX 7 f3 L C‘j / o D D ‘ s EXPOSED ‘05; [2,10] LOT NUMBER GROUND o‘osa [0‘92] PADDLE ,059 ["50] J MAX SQUARE m: ,9, W
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
4
HMC524LC3B
v03.0514
GaAs MMIC I/Q MIXER
22 - 32 GHz
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKLE
3. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND
MxN Spurious Outputs
nLO
mRF 01234
0xx -13 27 xx xx
118 035 52 xx
276 74 87 74 82
3xx 83 87 77 87
4xx xx 82 87 87
RF = 24.5 GHz @ -10 dBm
LO = 24.4 GHz @ 17 dBm
Data taken without IF hybrid
All values in dBc below IF power level
Absolute Maximum Ratings
RF / IF Input +20 dBm
LO Drive +27 dBm
Channel Temperature 150°C
Continuous Pdiss (T=85°C)
(derate 9.8 mW/°C above 85°C) 340 mW
Thermal Resistance (RTH)
(junction to die bottom) 191.5 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -55 to +85 °C
ESD Sensitivity (HBM) Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC524LC3B Alumina, White Gold over Nickel MSL3 [1] H524
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES magi ::: VT
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
5
HMC524LC3B
v03.0514
GaAs MMIC I/Q MIXER
22 - 32 GHz
Pin Number Function Description Interface Schematic
1, 3, 7, 8, 10,
11, 12 GND The backside of the die must be connected
to RF/DC ground.
2RF This pad is AC coupled and
matched to 50 Ohms.
4IF1
This pad is DC coupled. For applications not
requiring operation to DC, this port should be DC
blocked externally using a series capacitor whose
value has been chosen to pass the necessary IF
frequency range. For operation to DC, this pad must
not source/sink more than 3mA of current or die
non-function and possible die failure will result.
6IF2
5N/C
No connection required.
These pins may be connected to RF/DC ground
without affecting performance
9LO This pad is DC coupled and
matched to 50 Ohms.
Pin Descriptions
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES Rnfls/ HITTITE 113733—1 ooooooo oooooo J4 J3
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
6
HMC524LC3B
v03.0514
GaAs MMIC I/Q MIXER
22 - 32 GHz
Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
List of Materials for Evaluation PCB 109998 [1]
Item Description
J1, J2 PCB Mount K RF Connector, SRI
J3 - J4 PCB Mount SMA Connector, Johnson
U1 HMC524LC3B Mixer
PCB [2] 109996 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D

Products related to this Datasheet

IC MMIC IQ MIXER 12SMD
Available Quantity: 0
Unit Price: 0
IC MMIC IQ MIXER 12SMD
Available Quantity: 0
Unit Price: 0
IC MMIC IQ MIXER 12SMD
Available Quantity: 0
Unit Price: 0
EVAL BOARD HMC524LC3B
Available Quantity: 0
Unit Price: 0
IC MMIC IQ MIXER DIE
Available Quantity: 0
Unit Price: 0
IC MMIC IQ MIXER 12SMD
Available Quantity: 0
Unit Price: 0
IC MMIC IQ MIXER 12SMD
Available Quantity: 0
Unit Price: 0