Heat Shrink Products Catalog Datasheet by Qualtek

View All Related Products | Download PDF Datasheet
Qualtek CW1 Electronics Corporation Heat Shrink Products Cable Ties & Accessories Division 5‘ '//- \\ www.Qua|tekusa.com l
INDEX
www.Qualtekusa.com
General Information Page
HEAT SHRINK PRODUCTS SELECTION GUIDE 1-2
HEAT SHRINK PRODUCTS CROSS REFERENCE GUIDE 3
CABLE TIES CROSS REFERENCE GUIDE 4-8
HEAT SHRINK PRODUCTS INFORMATION 9
HEAT SHRINK APPLICATIONS / HEAT SHRINK TECHNOLOGY 10
TUBING FEATURES / SELECTION PARAMETERS / INSTALLATION INSTRUCTIONS 11
HEAT SHRINK PRODUCTS PART NUMBER GUIDE 12
Product Type
Heat Shrink Thin Wall Tubing Page
Q2-CB ULTRA THIN WALL, FLEXIBLE, ENVIRONMENT FRIENDLY, FLAME RETARDANT POLYOLEFIN TUBING, 2:1 SHRINK RATIO 13
Q2-F ENVIRONMENT FRIENDLY, FLEXIBLE, HIGHLY FLAME RETARDANT, HEAT SHRINKABLE TUBING, 2:1 SHRINK RATIO 14
Q2-F3X HIGHLY FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING, 3:1 SHRINK RATIO 15
Q2-F4X HIGH SHRINK RATIO, HIGHLY FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING, 4:1 SHRINK RATIO 16
Q2-F2XYG YELLOW & GREEN STRIPED, FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING, 2:1 SHRINK RATIO 17
Q2-F3XYG YELLOW & GREEN STRIPED, FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING, 3:1 SHRINK RATIO 17
Q2-HF LOW SMOKE, HALOGEN FREE, FLAME RETARDANT, HEAT SHRINKABLE TUBING, 2:1 SHRINK RATIO 18
Q2-LS VERY LOW SHRINK TEMPERATURE, FLEXIBLE, HALOGEN FREE, POLYOLEFIN TUBING, 2:1 SHRINK RATIO 19
Q2-R SEMI-RIGID, MULTI-PURPOSE, FLAME RETARDANT POLYOLEFIN TUBING, 2:1 SHRINK RATIO 20
Q2-Z ENVIRONMENT FRIENDLY, FLEXIBLE, FLAME RETARDANT, HEAT SHRINKABLE TUBING, 2:1 SHRINK RATIO 21
Q2-3X FLEXIBLE, THIN WALL, FLAME RETARDANT POLYOLEFIN TUBING, 3:1 SHRINK RATIO 22
Q-150K 150°C, BLACK, MODIFIED THIN WALL, FLEXIBLE PVDF TUBING, 2:1 SHRINK RATIO 23
Q-175K 175°C, CLEAR, SEMI-RIGID, HIGH TEMPERATURE, CHEMICAL RESISTANT PVDF TUBING, 2:1 SHRINK RATIO 24
Q-200E 200°C, VERY FLEXIBLE, MODIFIED FLUOROELASTOMER TUBING (Viton), 2:1 SHRINK RATIO 25
Q-PTFE PTFE HEAT SHRINKABLE TUBING 26
Heat Shrink Medium / Heavy Wall Tubing Page
Q5-2X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 2:1 SHRINK RATIO 27
Q5-3X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 3:1 SHRINK RATIO 28
Q5-4X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 4:1 SHRINK RATIO 29
Q5-F3X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 3:1 SHRINK RATIO 30
Q5-F4X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 4:1 SHRINK RATIO 31
Q5-4XR SEMI-RIGID, ADHESIVE LINED HEAT SHRINKABLE TUBING, 4:1 SHRINK RATIO 32
Q5-3XM HEAVY DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING, 3:1 SHRINK RATIO 33
QRA-6X VERY HIGH SHRINK RATIO, HEAVY DUAL WALL TUBING, HOT MELT ADHESIVE-LINED, 6:1 SHRINK RATIO 34
QBTM 24kV BUS BAR INSULATION TUBING, HALOGEN FREE 35
QBTH 36kV BUS BAR INSULATION TUBING, HALOGEN FREE 35
End Caps Page
QSEC HEAT SHRINKABLE CABLE END CAPS, 1000V WITH SPIRAL ADHESIVE COATING 36
Mini Spools, Q Boxes, Qkits & Refi ll Bags Page
MINI SPOOLS & Q BOXES 37
QKITS & REFILL BAGS 37-38
Cable Ties & Accessories Page
CABLE TIE INFORMATION 39
11 Series MARKER CABLE TIES , GENERAL PURPOSE 40
12 Series DOUBLE LOOP CABLE TIES, GENERAL PURPOSE 41
13 Series NYLON, BEADED CABLE TIES, GENERAL PURPOSE 42
14 Series NYLON, DOUBLE LOOP BEADED CABLE TIES , GENERAL PURPOSE, 43
15 Series CABLE TIES RUBBER ADHESIVE MOUNTING BASE, GENERAL PURPOSE 44
16 Series NYLON, CABLE TIES SCREW MOUNT BASE, GENERAL PURPOSE 45
17 Series STANDARD NYLON CABLE TIES, GENERAL PURPOSE 46-47
18 Series NYLON, MOUNTING HOLE CABLE TIES, GENERAL PURPOSE 48
19 Series NYLON, RELEASABLE PAWL TYPE CABLE TIES, GENERAL PURPOSE 49
20 Series NYLON, RELEASABLE TRIGGER TYPE CABLE TIES, GENERAL PURPOSE 50
21 Series NYLON, PUSH MOUNT CABLE TIES, GENERAL PURPOSE 51
22 Series STAINLESS STEEL CABLE TIES, SELF-LOCKING BALL LOCK HEAD DESIGN 52
INDEX
www.Qualtekusa.com
HEAT SHRINK THIN WALL TUBING HEAT SHRINK MEDIUM / HEAVY WALL TUBING - A IHESIVE LINED
www.Qualtekusa.com
HEAT SHRINK THIN WALL TUBING
HEAT SHRINK PRODUCTS SELECTION GUIDE
HEAT SHRINK MEDIUM / HEAVY WALL TUBING - ADHESIVE LINED
SHRINK TUBE KITS, REFILL BAGS, Q BOX & MINI SPOOLS
1
Part Number Material Product Type Shrink Ratio Operating Temp.
& Voltage Rating
Min.
Shrink
Temp.
Full
Recovery
Temp.
Q2-CB Polyolefi n Ultra Thin Wall 2:1 -55°C to +125°C, 300V 70°C 100°C
Q2-F Polyolefi n Thin Wall 2:1 -55°C to +135°C, 600V 70°C 100°C
Q2-F3X Polyolefi n Thin Wall 3:1 -55°C to +135°C, 600V 70°C 100°C
Q2-F4X Polyolefi n Thin Wall 4:1 -55°C to +135°C, 600V 70°C 100°C
Q2-F2XYG
Q2-F3XYG Polyolefi n Thin Wall 2:1, 3:1 -55°C to +135°C, 600V 70°C 100°C
Q2-HF Polyolefi n Thin Wall 2:1 -55°C to +105°C, 600V 70°C 100°C
Q2-LS Polyolefi n Thin Wall 2:1 -55°C to +125°C, 600V 65°C 95°C
Q2-R Polyolefi n Semi-Rigid Thin Wall 2:1 -55°C to +135°C, 600V 70°C 130°C
Q2-Z Polyolefi n Thin Wall 2:1 -55°C to +125°C, 600V 70°C 100°C
Q2-3X Polyolefi n Thin Wall 3:1 -55°C to +125°C, 600V 70°C 100°C
Q-150K Modifi ed PVDF Flexible Thin Wall 2:1 -55°C to +150°C, 600V 135°C 150°C
Q-175K PVDF Semi-Rigid Thin Wall 2:1 -55°C to +175°C, 600V -175°C
Q-200E
Modifi ed
Fluoroelastomer
Viton
Very Flexible Thin Wall 2:1 -55°C to +200°C, 600V 150°C 175°C
QPTFE Modifi ed PTFE Semi-Rigid Thin Wall 2:1 -65°C to +260°C, 600V -350°C
Part Number Material Product Type Shrink Ratio Operating Temp.
& Voltage Rating
Min.
Shrink
Temp.
Full
Recovery
Temp.
Q5-2X Polyolefi n Dual Wall 2:1 -45°C to +125°C, 600V 100°C 125°C
Q5-3X Polyolefi n Dual Wall 3:1 -55°C to +125°C, 600V 80°C 110°C
Q5-4X Polyolefi n Dual Wall 4:1 -55°C to +125°C, 600V 80°C 110°C
Q5-F3X Polyolefi n Dual Wall 3:1 -55°C to +125°C, 600V 70°C 110°C
Q5-F4X Polyolefi n Dual Wall 4:1 -55°C to +125°C, 600V 70°C 110°C
Q5-4XR Polyolefi n Semi-Rigid Dual Wall 4:1 -55°C to +125°C, 600V 110°C 135°C
Q5-3XM Polyolefi n Heavy Dual Wall 3:1 -55°C to +125°C, 600V 80°C 110°C
QRA-6X Polyolefi n Heavy Dual Wall 6:1 -55°C to +110°C, 600V 120°C 120°C
QBTM
QBTH
Non-Halogen
Polymer Bus Bar - -55°C to +105°C, 24-36kV 120°C -
Part Number Material Product Type Shrink Ratio Operating Temp.
& Voltage Rating
Min.
Shrink
Temp.
Full
Recovery
Temp.
QSEC Polyolefi n Cable End Caps - -55°C to +110°C, 1000V 120°C -
END CAPS
“”6 ma “”6 “Ha ma 6 a “”6 “Ha “Ha nu nu “Ha “Ha “Ha
www.Qualtekusa.com
2
General Description Agency
Certifi cation
Military
Standard Page
SAE-AMS-DTL
No PBB’s, PBBE’s, PBBO’s, Low Cadmium and Lead, VW-1
mm Sizes: 1.0 to 10mm, Inch Sizes: 3/64” to 1/2” E236137
242540 -13
No PBB’s, PBBE’s, PBBO’s, Very Flexible, Highly Flame-Retardant, VW-1
mm Sizes: 1.2 to 151mm, Inch Sizes: 3/64” to 6” E236137
242540
23053/5
Class 1 & 3 14
No PBB’s, PBBE’s, PBBO’s, Very Flexible, High Shrink Ratio, Highly Flame-Retardant, VW-1
mm Sizes: 1.5 to 39mm, Inch Sizes: 1/16” to 1 1/2” E236137
242540
23053/5
Class 1 & 3 15
No PBB’s, PBBE’s, PBBO’s, Very Flexible, High Shrink Ratio, Highly Flame-Retardant
mm Sizes: 19.1 to 115mm, Inch Sizes: 3/4” to 4 1/2” E236137
242540
23053/5
Class 1 & 3 16
Yellow-Green Striped, Flexible, Flame-Retardant Tubing, VW-1
2:1 - mm Sizes: 1.2 to 101.6mm, Inch Sizes: 3/64” to 4”, 3:1 - mm Sizes: 1.6 to 39mm, Inch Sizes: 1/16” to 1 1/2” E236137
242540
23053/5
Class 1 & 3 17
Halogen Free Polyolefi n Tubing, Low Smoke
mm Sizes: 1.0 to 150mm 242540 - 18
Very Flexible, Low Shrink Temperature, Halogen Free Polyolefi n Tubing
mm Sizes: 1.6 to 50.8mm, Inch Sizes: 1/16” to 2” 242540 - 19
Semi-Rigid, Flame-Retardant Tubing, Resistant to Common Chemicals and Solvents, Self-Extinguish in 30 Seconds
mm Sizes: 1.2 to 25.4mm, Inch Sizes: 3/64” to 1” E236137
242540
23053/6
Class 1 & 2 20
Environment Friendly, Flexible, Flame-Retardant, VW-1
mm Sizes: 1.0 to 150mm, Inch Sizes: 3/64” to 6” E236137
242540 -21
Flexible, High Shrink Ratio, Highly Flame-Retardant, VW-1
mm Sizes: 1.5 to 39mm, Inch Sizes: 1/16” to 1 1/2” E236137
242540 -22
Flexible, High Temperature, Chemical Resistant, Polyvinylidene Fluoride(PVDF) Kynar®, VW-1
mm Sizes: 1.2 to 38.1mm, Inch Sizes: 3/64” to 1 1/2” VW-1
E245010 23053/18 23
Clear, High Temperature, Chemical Resistant, Polyvinylidene Fluoride (PVDF) Kynar®, VW-1
mm Sizes: 1.2 to 38.1mm, Inch Sizes: 3/64” to 1 1/2” VW-1
E245010 23053/18 24
Flexible, Elastic, High Temperature, Solvent Resistant, Viton®, VW-1
mm Sizes: 3.2-50.8mm, Inch Sizes: 1/8” to 2” VW-1
E245010 23053/13 25
Polytetrafl uoroethylene Tubing, Self-Extinguish
Sizes: AWG 30 to AWG 0 - 23053/12 26
General Description Agency
Certifi cation
Military
Standard Page
SAE-AMS-DTL
Adhesive-Lined, Flexible, High Shrink Ratio, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds
mm Sizes: 3.2 to 38.1mm, Inch Sizes: 1/8” to 1 1/2”
E236137
242540 23053/4 27
Adhesive-Lined, Flexible, High Shrink Ratio, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds
mm Sizes: 3.0 to 50.0mm, Inch Sizes: 1/8” to 2”
E236137
242540 23053/4 28
Adhesive-Lined, Flexible, High Shrink Ratio, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds
mm Sizes: 4.0 to 52.0mm, Inch Sizes: 3/16” to 2”
E236137
242540 23053/4 29
Adhesive-Lined, Flexible, Polyolefi n Tubing, Self-Extinguish in 30 Seconds
mm Sizes: 3.0 to 40mm, Inch Sizes: 1/8” to 1 1/2”
E236137
242540 23053/4 30
High Shrink Ratio, Adhesive-Lined, Flexible, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds
mm Sizes: 4 to 52mm, Inch Sizes: 3/16” to 2”
E236137
242540 23053/4 31
High Shrink Ratio, Semi-Rigid, Adhesive-Lined, Flexible, Flame-Retardant Tubing, Self-Extinguish in 30 Seconds
mm Sizes: 6.0 to 18.0mm, Inch Sizes: 0.236” to 0.708” - 23053/4 32
Heavy Dual Wall, High Shrink Ratio, Adhesive-Lined, Flame-Retardant, Self-Extinguish in 30 Seconds
mm Sizes: 19.0 to 100.0mm, Inch Sizes: 3/4” to 4” --33
Very High Shrink Ratio, Heavy Dual Wall, Hot-Melt, Adhesive-Lined
mm Sizes: 19.0 to 235mm --34
Specially formulated radiation cross-linked halogen free compounds. High resistance to tracking and arcing. UV and weather resistant
mm Sizes: 15.0 to 235mm --35
General Description Page
Spiral Hot-Melt Adhesive Coated End Cap for Protecting Cable Ends from the Environmental Eff ects.
mm Sizes: 12 to 200mm 36
37-38
www.Qualtekusa.com
HEAT SHRINK PRODUCTS CROSS REFERENCE GUIDE
Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only.
Qualtek PN Page Raychem Sumitomo Canusa 3M Alpha Insul Tab LG
Q2-CB 13 VERSAFIT V4 F3(Z) Deray ITW GSHS-1625G
Q2-F 14 RNF-100, VERSAFIT B2, B2(Z), F, F2, F2(Z) CPX100, CPX-876 FP-301 FIT 221, FIT 221V HS-101 GSHS-1635F
Q2-F3X 15 RNF-3000 B2(3X), F2(3X),A2(3X) CPX300, Deray-I 3000 SFTW-203 FIT 321V HS101 SR GSHS-3635
Q2-F4X 16 RP-4800 W3B2(4X) FIT 421
Q2-F2XYG 17 DCPT 2:1 B2(Y/G) Deray IGY, CPX-201 SFTW-202GYS FIT 260 GSHS-1635Y/G
Q2-F3XYG 17 DCPT 3:1 Deray IGY, CPX-201 HS-101(3X)
Q2-HF 18 ZHTM SUMITUBE-NH CZT-200
Q2-LS 19 LSTT Deray LSB
Q2-R 20 CRN, RT-3 B8 CHM 140 SR350 FIT 295 HS-101-SR
Q2-Z 21 VERSAFIT V2 F2(Z) Deray H CP-221 GSHS-1625G
Q2-3X 22 VERSAFIT 3X F2(3X), B2(3X) HS101SR
Q-150K 23 RT 375, RNF-150 K2 THV-150 BLACK FIT 221VC GSHS-1650F
Q-175K 24 KYNAR, RW-175 K CKN-175, Deray KY 175 KYNAR FIT 350 HSK-600 GSHS-1675
Q-200E 25 VITON FE3 Deray VT220 VITON FIT 650 HSN-VTN
Q-PTFE 26 TFE Deray PTFE
QDR - DR-25 Deray V25
QDR-TW - DR-25-TW Deray V25TW
Q5-2X 27 TAT-125 02B2 EPS-200 FIT 750 HS-101-MV 2:1 GSHS-1625W
Q5-3X 28 DWP-125 W3B2 CPA 300 EPS-300 FIT 321 HS-101-MW 3:1 GSHS-3635W
Q5-4X 29 ATUM 4:1 W3B2 EPS-400 HS-101-MW 4:1 GSHS-4635W
Q5-F3X 30 ATUM 3:1 W3B2(4X) Deray IAKT 3:1 EPS-300 FIT 321 HS-101-MW 3:1 GSHS-3635W
Q5-F4X 31 ATUM 4:1 Deray IAKT 4:1 EPS-400 HS-101-MW4:1 GSHS-4635W
Q5-4XR 32 ES-2000 SA2 Deray Splicemelt EPS-400, SMS FIT 421 GSHS-4635WS
Q5-3XM 33 SST ITCSN, MDT FIT 700
Q5-2000 - AP-2000 O2 GSHS-2690NW
QRA2 - MWTM CFM IMCSN, MDT LG-PMWT
QRA3 - WCSM, SST CFW FIT 700 LG-PHWT
QFRA3 - BSTSFR, SSTFR FCFW HDT, ITCSF
QRA-6X 34 CFHR FIT 321
QBTM 35 BPTM CBTM BBI
QBTH 35 BBIT CBTH
QRS -PLA
QSTV - TCS2 CFTV CCT CTV LG-CATV
QAT - HVTM CNTT
QBM - BBIT CBTH BBI LG-BBVH
QBT - BPTM CBTM BBI
QSCT -HSCT
QSC-100 - SCR-100 CSCR
QSEC 36 SSC, ESC CCAP, CEC ICEC FIT CAP
3
4
CABLE TIES CROSS REFERENCE GUIDE
www.Qualtekusa.com
Qualtek PN Page Catamount
T&B
Thomas &
Betts Panduit Ideal Ind. Hellermann
Tyton
Avery
Dennison Richco 3M
11-M100B-C 40 TY551MX PLM1M-C0 IT18R0C2
11-M100N-C 40 L-4-18ID-9-C TY551M PL1M-C IT1MID-C IT18R9C2 08417 WIT-F1-18R-M
11-M110B-C 40 TY553MX PLF1M-C0 IT18FL0C2
11-M110N-C 40 TY153M,
TY553M PLF1M-C IT18FL9C2 10687 WIT-F2-18R-M
11-M200B-C 40 TY5512MX PLM2M-M0 10426
11-M200N-C 40 TY5512M PL2M-C 10427
11-S190B-C 40 TY546MX PLM2S-C0
11-S190N-C 40 L-7-50ID-9-C TY546M PLM2S-C IT2SID-C
12-S200B-C 41 T50RDH0C2
12-S200N-C 41 TB-50RLDH T50RDH9C2
12-S300B-C 41 T50IDH0C2 10432
12-S300N-C 41 TB-12-50RLDH T50IDH9C2 10430
13-100B-C 42 BT-4-01-NT
13-100N-C 42 BT-4-01-BK
13-150B-C 42 BT-6-01-NT
13-150N-C 42 BT-6-01-BK
13-200B-C 42 BT-8-01-NT
13-200N-C 42 BT-8-01-BK
15-1919B-C 44 MPNY-750-0-C IT750MP-C0 FTH-5A1-RT-UVB,
FTH-5A1-01-UVB CTB75X75BKA-C
15-1919N-C 44 MPNY-750-9-C TC5344A ABMM-A-C IT750MP-C 10029 FTH-5A1-RT,
FTH-5A1-01 CTB75X75NTA-C
15-2525B-C 44 MPNY-1000-0- C IT1000MP-C0 FTH-7A1-RT-UVB,
FTH-7A1-01-UVB CTB1X1BKA-C
15-2525N-C 44 MPNY-1000-9-C TC5345A ABM2S-A-C,
ABM112-A-C IT1000MP-C 10030,
08463
FTH-7A1-RT,
FTH-7A1-01 CTB1X1NTA-C
15-4040B-C 44 FTH-4040B-C
15-4040N-C 44 TC150X150A-L ABM3H-A-L FTH-8-01
16-1509B-C 45 IT1SMB-C0
16-1509N-C 45 SMNY-000-9-D IT1SMB-C 10044
16-1712N-C 45 10045
16-2216B-C 45 IT2SMB-C0
16-2216N-C 45 SMNY-002-9-D IT2SMB-C
16-2516N-C 45 10046
17-EHD1220B-L 47 L-48-175-0-L TY54513MX PLT13H-Q0 IT14H-L0 T150XL0X2 CT48BK175-L
17-EHD1220N-L 47 L-48-175-9-L TY54513M PLT13H-Q IT14H-L T150XL9X2 CT48NT175-L
17-EHD400B-L 47 T150R0X2
17-EHD400N-C 47 WIT-175S-C
17-EHD400N-L 47 T150R9X2
17-EHD450B-L 47 PLT5H-L0
17-EHD450N-L 47 PLT5H-L
17-EHD550B-L 47 PLT6H-L0 T150M0X2
17-EHD550N-L 47 PLT6H-L T150M9X2
17-EHD610B-L 47 L-24-175-0-L CT24BK175-L
17-EHD610N-C 47 WIT-175R-C
17-EHD610N-L 47 L-24-175-9-L CT24NT175-L
17-EHD750B-L 47 IT7H-L0
17-EHD750N-L 47 IT7H-L
17-EHD780B-L 47 PLT8H-L0
17-EHD780N-L 47 PLT8H-L
17-EHD810B-L 47 T150L0X2
17-EHD810N-C 47 WIT-175L-C
17-EHD810N-L 47 T150L9X2
17-EHD920B-L 47 L-36-175-0-L TY53510MX T150LL0X2 CT36BK175-L
17-EHD920N-L 47 L-36-175-9-L TY53510M T150LL9X2 CT36NT175-L
17-HD200B-C 46 L-8-120-0-C PLT2H-L0 CT8BK120-L
Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only.
www.Qualtekusa.com
5
Qualtek PN Page Catamount
T&B
Thomas &
Betts Panduit Ideal Ind. Hellermann
Tyton
Avery
Dennison Richco 3M
17-HD200N-C 46 L-8-120-9-C PLT2H-L CT8NT120-L
17-HD220B-C 46 TY5272MX T120S0K2
17-HD220N-C 46 TY5272M T120S9K2 WIT-120S-C
17-HD250B-C 46 PLT2.5H-L0
17-HD250N-C 46 PLT2.5H-L
17-HD300B-C 46 L-100-120-0-C PLT3H-L0 T120I0K2
17-HD300N-C 46 L-100-120-9-C PLT3H-L T120I9K2
17-HD350B-C 46 TY527MX
17-HD350N-C 46 TY527M
17-HD365B-C 46 L-14-120-0-C 10039
17-HD365N-C 46 L-14-120-9-C 10038
17-HD380B-C 46 PLT4H-L0 IT4LH-L0 T120R0K2 CT15BK120-C
17-HD380N-C 46 PLT4H-L IT4LH-L T120R9K2 WIT-120R-C CT15NT120-C
17-HD450B-C 46 TY5275MX IT5LH-L0
17-HD450B-L 46 L-18-120-9-L
17-HD450N-C 46 TY5275M IT5LH-L
17-HD450N-L 46 L-18-120-9-L
17-HD540B-L 46 10608
17-HD540N-C 46 WIT-120L-C
17-HD540N-L 46 10606
17-HD550B-L 46 PLT6LH-L0 10620
17-HD550N-L 46 PLT6LH-L 10618
17-HD750B-C 46 TY529MX,
TY5277MX
17-HD750B-L 46 L-28-120-0-L PLT9LH-L0 T120L0K2
17-HD750N-C 46 TY529M,
TY5277M
17-HD750N-L 46 L-28-120-9-L PLT9LH-L T120L9K2
17-HSD1000N-L 47 T250XL9X2,
T250XL0X2
17-HSD530B-L 47 T250R0X2
17-HSD530N-L 47 T250R9X2
17-HSD650B-L 47 IT6EH-C0 T250M0X2
17-HSD650N-L 47 T250M9X2
17-I140B-C 46 L-5-30-0-C TY524MX PLT1.5I-C0 CT6BK40-C
17-I140B-M 46 L-5-30-0-M TY24MX PLT1.5I-M0 CT6BK40-M
17-I140N-C 46 L-5-30-9-C TY524M PLT1.5I-C CT6NT40-C
17-I140N-M 46 L-5-30-9-M TY24M PLT1.5I-M CT6NT40-M
17-I150B-C 46 IT1_5I-C0
17-I150B-M 46 IT1_5I-M0
17-I150N-C 46 IT1_5I-C WIT-40R-C
17-I150N-M 46 IT1_5I-M WIT-40R-M
17-I200B-C 46 L-8-40-0-C TY5242MX PLT21-C0 T40R0C2 08386
17-I200B-M 46 L-8-40-0-M TY242MX PLT21-M0 T40R0M4 08380
17-I200N-C 46 L-8-40-9-C TY5242M PLT21-C T40R9C2 08385 WIT-40L-C,
WIT-40XL-C
17-I200N-M 46 L-8-40-9-M TY242M PLT21M T40R9M4 08377 WIT-40L-M,
WIT-40XL-M
17-I250B-C 46 PLT2.5I-C0 CT8BK40-C
17-I250B-M 46 PLT2.5I-M0 CT8BK40-M
17-I250N-C 46 PLT2.5I-C CT8NT40-C
17-I250N-M 46 PLT2.5I-M CT8NT40-M
17-I280B-C 46 TY526MX WIT-40VL-UVB-C
17-I280B-M 46 TY26MX WIT-40VL-UVB-M
17-I280N-C 46 TY526M WIT-40VL-C
17-I280N-M 46 TY26M WIT-40VL-M
17-I300B-C 46 L-11-40-0-C PLT31-C0 IT31-C0 T40I0C2
17-I300B-M 46 L-11-40-0-M PLT31-M0 T40I0M4
CABLE TIES CROSS REFERENCE GUIDE
Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only.
6
www.Qualtekusa.com
Qualtek PN Page Catamount
T&B
Thomas &
Betts Panduit Ideal Ind. Hellermann
Tyton
Avery
Dennison Richco 3M
17-I300N-C 46 L-11-40-9-C PLT31-C IT31-C T40I9C2
17-I300N-M 46 L-11-40-9-M PLT31-M T40I9M4
17-I370B-C 46 L-14-40-0-C TY5244MX PLT41-C0 T40L0C2
17-I370B-M 46 L-14-40-0-M TY244MX PLT41-M0 M40L0M4
17-I370N-C 46 L-14-40-9-C TY5244M PLT41-C T40L9C2
17-I370N-M 46 L-14-40-9-M TY244M PLT41-M T40L9M4
17-M100B-C 46 L-4-18-0-C TY523MX PLT1M-C0 IT1M-C0 T18R0C2 08435 CT4BK18-C
17-M100B-M 46 L-4-18-0-M TY23MX PLT1M-M0 IT1M-M0 T18R0M4 08433 CT4BK18-M
17-M100N-C 46 L-4-18-9-C TY523M PLT1M-C IT1M-C T18R9C2 08434 CT4NT18-C
17-M100N-M 46 L-4-18-9-M TY23M PLT1M-M IT1M-M T18R9M4 08432 CT4NT18-M
17-M120B-C 46 WIT-18R-UVB-C
17-M120B-M 46 WIT-18R-UVB-M
17-M120N-C 46 WIT-18R-C
17-M120N-M 46 WIT-18R-M
17-M150B-C 46 PLT1.5M-C0 T18I0C2 WIT-18L-UVB-C CT6BK18-C
17-M150B-M 46 PLT1.5M-M0 T18I0M4 WIT-18L-UVB-M
17-M150N-C 46 PLT1.5M-C T18I9C2 WIT-18L-C CT6NT18-C
17-M150N-M 46 PLT1.5M-M T18I9M4 WIT-18L-M
17-M160B-C 46 L-6-18-0-C CT6NT18-M
17-M160B-M 46 L-6-18-0-M
17-M160N-C 46 L-6-18-9-C
17-M160N-M 46 L-6-18-9-M
17-M200B-C 46 L-8-18-0-C TY5232MX,
TY52315MX PLT2M-C0 IT2M-C0 T18L0C2 WIT-18V-UVB-C CT8BK18-C
17-M200B-M 46 L-8-18-0-M TY232MX,
TYB2315MX PLT2M-M0 IT2M-M0 T18L0M4 WIT-18V-UVB-M CT8BK18-M
17-M200N-C 46 L-8-18-9-C TY5232M,
TY52315M PLT2M-C IT2M-C T18L9C2 WIT-18V-C CT8NT18-C
17-M200N-M 46 L-8-18-9-M TY5232M,
TYB2315M PLT2M-M IT2M-M T18L9M4 WIT-18V-M CT8NT18-M
17-M80B-C 46 PLT.7M-C0 T18S0C2 WIT-18SF-UVB-C
17-M80B-M 46 PLT.7M-M0 T18S0M4 WIT-18SF-UVB-M
17-M80N-C 46 PLT.7M-C T18S9C2 WIT-18SF-C
17-M80N-M 46 PLT.7M-M T18S9M4 WIT-18SF-M
17-S120B-C 46 PLT1S-C0
17-S120B-M 46 PLT1S-M0
17-S120N-C 46 PLT1S-C
17-S120N-M 46 PLT1S-M
17-S160B-C 46 L-5-50-0-C PLT1.5S-C0 T50S0C2
17-S160B-M 46 L-5-50-0-M PLT1.5S-M0 T50S0M4
17-S160N-C 46 L-5-50-9-C PLT1.5S-C T50S9C2 WIT-50S-C
17-S160N-M 46 L-5-50-9-M PLT1.5S-M T50S9M4 WIT-50S-M
17-S190B-C 46 L-7-50-0-C TY525MX PLT2S-C0 IT2S-C0 08437 CT8BK50-C
17-S190B-M 46 L-7-50-0-M TY25MX PLT2S-M0 IT2S-M0 08388 CT8BK50-M
17-S190N-C 46 L-7-50-9-C TY525M PLT2S-C IT2S-C 08436 CT8NT50-C
17-S190N-M 46 L-7-50-9-M TY25M PLT2S-M IT2S-M 08387 CT8NT50-M
17-S200B-C 46 T50R0C2
17-S200B-M 46 T50R0M4
17-S200N-C 46 T50R9C2 WIT-50R-C
17-S200N-M 46 T50R9M4 WIT-50R-M
17-S250B-C 46 PLT2.5S-C0
17-S250B-M 46 PLT2.5S-M0
17-S250N-C 46 PLT2.5S-C
17-S250N-M 46 PLT2.5S-M
17-S280B-C 46 L-11-50-0-C IT3S-C0 08930 CT11BK50-C
17-S280B-M 46 IT3S-D0 08286 CT11BK50-D,
CT11NT50-D
Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only.
CABLE TIES CROSS REFERENCE GUIDE
www.Qualtekusa.com
7
Qualtek PN Page Catamount
T&B
Thomas &
Betts Panduit Ideal Ind. Hellermann
Tyton
Avery
Dennison Richco 3M
17-S280N-C 46 L-11-50-9-C IT3S-C 08859 CT11NT50-C
17-S280N-M 46 IT3S-D 08600
17-S300B-C 46 TY5253MX PLT3S-C0 T50I0C2
17-S300B-M 46 TY253MX PLT3S-M0 T50I0M4
17-S300N-C 46 TY5253M PLT3S-C T50I9C2
17-S300N-M 46 TY253M PLT3S-M T510I9M4
17-S360B-C 46 L-14-50-0-C
17-S360N-C 46 L-14-50-9-C
17-S370B-C 46 TY528MX PLT4S-C0 IT4S-C0 CT15BK50-C
17-S370B-M 46 TY28MX PLT4S-M0 IT4S-D0 CT15BK50-D
17-S370N-C 46 TY528M PLT4S-C IT4S-C CT15NT50-C
17-S370N-M 46 TY28M PLT4S-M IT4S-D CT-15NT50-D
17-S380B-C 46 08428
17-S380B-M 46 10037
17-S380N-C 46 08427
17-S380N-M 46 10036
17-S390B-C 46 T50L0C2
17-S390B-M 46 T50L0M4
17-S390N-C 46 T50L9C2 WIT-50L-C
17-S390N-M 46 T50L9M4 WIT-50L-M
17-S400B-C 46 PLT4.5S-C0
17-S400B-M 46 PLT4.5S-M0
17-S400N-C 46 PLT4.5S-C
17-S400N-M 46 PLT4.5S-M
17-S430B-C 46 IT5S-C0
17-S430N-C 46 IT5S-C
17-S450B-C 46 PLT5S-C0
17-S450B-M 46 PLT5S-M0
17-S450N-C 46 PLT5S-C
17-S450N-M 46 PLT5S-M
18-HD305B-C 48 PLC2H-S25-L0
18-HD305N-C 48 PLC2H-S25-L
18-HD400B-C 48 L-14-120MH-0-C TY537MX PLC4H-S25-L0 T120MR0K2 10040
18-HD400N-C 48 L-14-120MH-9-C TY537M PLC4H-S25-L T120MR9K2 08426 CT15NT120S-L
18-I150B-C 48 L-5-30MH-0-C TY534MX PLC1.5I-S8-C0 T30MR0C2
18-I150N-C 48 L-5-30MH-9-C TY534M PLC1.5I-S8-C T30MR9C2
18-M110B-C 48 TY533MX PLC1M-S4-C0 T18MR0C2
18-M110N-C 48 TY533M PLC1M-S4-C T18MR9C2
18-S200B-C 48 L-7-50MH-0-C TY535MX PLC2S-S10-C0 IT2SMH-C0 08318 CT8BK50S-C
18-S200N-C 48 L-7-50MH-9-C TY535M PLC2S-S10-C IT2SMH-C 08484 CT8NT50S-C
18-S305B-C 48 L-11-50MH-0-C PLC3S-S10-C0 IT3SMH-C0 T50MI0C2 10354
18-S305N-C 48 L-11-50MH-9-C PLC3S-S10-C IT3SMH-C T50MI9C2 10350
18-S370B-C 48 L-14-50MH-0-C TY5354MX PLC4S-S10-C0 IT4SMH-C0
18-S370N-C 48 L-14-50MH-9-C TY5354M PLC4S-S10-C IT4SMH-C
19-S160B-C 49 PRT1.5S-C0 RT50S0C2
19-S160N-C 49 PRT1.5S-C RT50S9C2 WIT-50SR-C
19-S200B-C 49 PRT2S-C0 10366
19-S200N-C 49 PRT2S-C 10364
19-S305B-C 49 PRT3S-C0 10369
19-S305N-C 49 PRT3S-C 10370
19-S380B-C 49 PRT4S-C0 RT50LL0C2
19-S380N-C 49 PRT4S-C RT50LL9C2
20-S150B-C 50 L-5-50R-0-C REL50R0C2
20-S150N-C 50 L-5-50R-9-C REL50R9C2
20-S200B-C 50 L-8-50R-0-C
CABLE TIES CROSS REFERENCE GUIDE
Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only.
8
www.Qualtekusa.com
Qualtek PN Page Catamount
T&B
Thomas &
Betts Panduit Ideal Ind. Hellermann
Tyton
Avery
Dennison Richco 3M
20-S200N-C 50 L-8-50R-9-C
20-S250B-C 50 REL50L0C2
20-S250N-C 50 REL50L9C2
20-S300B-C 50 L-10-50R-0-C
20-S300N-C 50 L-10-50R-9-C
21A-M100B-C 51 WIT-18RA-UVB
21A-M100N-C 51 PLWP1M-C 126-00041 10690 WIT-18RA-01
21A-S130B-C 51 PLWP1S-C0 WIT-50SA-UVB
21A-S130N-C 51 PLWP1S-C WIT-50SA-01
21A-S200B-C 51 L-7-50PM-0-C TY538MX PLWP2S-C0 WIT-50RA-UVB
21A-S200N-C 51 L-7-50PM-9-C TY538M PLWP2S-C WIT-50RA-01
21A-S130N-C 51
21B-I155B-C 51 PLP1.5I-M0 126-00045
21B-I155N-C 51 TY554M PLP1.5I-C 126-00043
21B-S200B-C 51 PLP2S-M0 T50RSF0C2 08446 WIT-50RLA-3-UVB
21B-S200N-C 51 PLP2S-C T50RSF9C2 08439 WIT-50RLA-3
22-H200A-C 52 LS-7.9-200A MLT2LH-LP MBT8H-S
22-H200B-C 52 LS-7.9-200B MLT2LH-LP316 MBT8H
22-H200D-C 52 LS-7.9-200-C MLTFC2H-LP316
22-H360A-C 52 LS-7.9-360A MLT4LH-LP MBT14H-S
22-H360B-C 52 LS-7.9-360B MLT4LH-LP316 MBT14H
22-H360D-C 52 LS-7.9-360-C MLTFC4H-LP316
22-H520A-C 52 LS-7.9-520A MLT6LH-LP MBT20H-S
22-H520B-C 52 LS-7.9-520B MLT6LH-LP316 MBT20H
22-H520D-C 52 LS-7.9-520-C MLTFC6H-LP316
22-H680A-C 52 LS-7.9-680A MLT8LH-LP MBT27H-S
22-H680B-C 52 LS-7.9-680B MLT8LH-LP316 MBT27H
22-H680D-C 52 LS-7.9-680-C MLTFC8H-LP316
22-H840A-C 52 LS-7.9-840A MBT33H-S
22-H840B-C 52 LS-7.9-840B MBT33H
22-H840D-C 52 LS-7.9-840-C
22-S125A-C 52 MLT1S-CP MBT5S-S
22-S125B-C 52 MLT1S-CP316 MBT5S
22-S200A-C 52 LS-4.6-200A MLT2S-CP MBT8S-S
22-S200B-C 52 LS-4.6-200B MLT2S-CP316 MBT8S
22-S200D-C 52 LS-4.6-200-C
22-S260A-C 52 MLT2.7S-CP
22-S260B-C 52 MLT2.7S-CP316
22-S360A-C 52 LS-4.6-360A MBT14S-S
22-S360B-C 52 LS-4.6-360B MLT4S-CP MBT14S
22-S360D-C 52 LS-4.6-360-C MLT4S-CP316
22-S520A-C 52 LS-4.6-520A MLT6S-CP MBT20S-S
22-S520B-C 52 LS-4.6-520B MLT6S-CP316 MBT20S
22-S520D-C 52 LS-4.6-520-C
22-S680A-C 52 LS-4.6-680A MLT8S-CP MBT27S-S
22-S680B-C 52 LS-4.6-680B MLT8S-CP316 MBT27S
22-S680D-C 52 LS-4.6-680-C
22-S840A-C 52 LS-4.6-840A MLT10S-CP MBT33S-S
22-S840B-C 52 LS-4.6-840B MLT10S-CP316 MBT33S
22-S840D-C 52 LS-4.6-840-C
CABLE TIES CROSS REFERENCE GUIDE
Note: Qualtek products may not be a direct equivalent as listed; this cross reference is a guide only.
uaflek Electronics Corporation HEAT SHRINK PRODUCTS Qualtek Electronics offers a complete line of heat shrinkable products which include: , Thin, medium and heavy wall heat shrink tubing Adhesive lined Medium and high voltage insulation Molded parts and end caps Cold shrink Shrink tubing kits, cables and wire indentification tubing ‘ Specializing in custom cut lengths for all products
9
)——( )——[ )——( )——( ]——(
10
Compound
With a strong background in the research and development of modifi ed polymer materials, we have developed a
variety of chemical formulations for diff erent types of heat shrinkable products.
Extrusion
Equipped with 20 advanced extrusion lines, we are able to produce stable and homogeneous dimensions. Our
advanced co-extrusion technology makes it possible to manufacture polyolefi n / hot melt adhesive dual wall and
insulation / conductive multi-layer tubing.
Irradiation
There are three sets of specially designed electronic accelerators in-house to meet requirements of diff erent sizes
and shapes of shrinkable products that assures proper crosslinking of the product.
Expansion
This important process is required to obtain fi nal forms and dimensions of heat shrink products. With our modern
equipment and technology, we can accurately control the dimensions, longitudinal changes and eccentricity of
the fi nal product.
Packaging
After completion of the production cycle and quality control checks, the product is packaged to meet market
demands such as standard product or is processed to customer designs from cut-to-length pieces to special
packaging requirements.
Qualtek heat shrinkable products include Polyolefi n, Silicon, Te on, VitonKynarHalogen-Free, high temp,
single wall, double wall and adhesive lined tubing with varying shrink ratio, colors and sizes. We also off er Military
(MIL) specifi cation shrink tubing with varying ratios, colors and sizes. Qualtek's heat shrink tubing products are
produced by cross-linking extruded polymer compounds which produces a shape memory eff ect and when heated
can be recovered to its original shape.
Heat Shrink Technology
www.Qualtekusa.com
Heat Shrink Applications
White Goods
Aviation
Pipe Line
Wire Harness
Marine
Electronics
Automotive
Power Generation
Military
Telecom
HEAT SHRINK APPLICATIONS / HEAT SHRINK TECHNOLOGY
Wide range of sizes: micro up to very large
Large selection of colors
Low shrink temperatures: down to 65°C
High temperature rating: up to 260°C
Abrasion, moisture and chemical / solvent resistant
High shrink ratios: 2:1, 3:1, 4:1, & 6:1
Halogen & PBB free with low lead & cadmium
Flexible types: super fl exible, fl exible, semi rigid & rigid
Single wall: ultra thin, very thin, thin, medium & heavy
Dual wall adhesive lined: thin, medium & heavy
Packaging: large & small spools, cut-to-length, kits & bags
Special compound formulations available upon request
Size
Shrink Ratio
Operating Temperature
Recovery Temperature
Flammablilty Rating
Electrical Rating
Certifi cations & Specifi cations
Resistance to Solvents & Chemicals
Flexibility
Mechanical Properties
Selection Parameters
Place the heat shrink tubing over the product to be covered. Heat the tubing evenly
until the tube shrinks around the object or the tube is shrunk completely (according to
shrink ratio). Dual wall shrink tubing with adhesive may require additional heating to
melt the adhesive for accurate installation.
Constantly move the heat source or product during installation. Avoid concentrating the heat
source in one location on the heat shrink tubing. Maintain heat source temperature to achieve
appropriate shrink ratio and prevent charring or burning.
Recommended heat sources include: Hot air gun, oven, infrared heat source, or soft ame. Use
adequate ventilation during and following installation.
Stop heating immediately if charring or burning of tubing occurs to prevent injury to operator or
product. Charring or burning of ceratin tubing can create hazardous fumes that can potentially
cause eye, skin, nose and throat irritation.
For additional information, please contact your supplier or Qualtek.
Installation Instructions
Tubing Features
www.Qualtekusa.com
11
TUBING FEATURES / SELECTION PARAMETERS / INSTALLATION INSTRUCTIONS
12
www.Qualtekusa.com
HEAT SHRINK PRODUCTS PART NUMBER GUIDE
COLOR CODES:
01 BLACK
02 CLEAR
03 WHITE
04 RED
05 BLUE
06 GREEN
07 YELLOW
08 YELLOW / GREEN
09 BROWN
10 ORANGE
11 ASSORTED COLORS
12 GRAY
LENGTH:
FT = FEET
M = METERS
IN = INCH
MM = MILLIMETERS
SAMPLE TABLE: Q2-F
PART NUMBER EXAMPLE:
X - X - X - X X - X
(6) QUANTITY - QB (Q BAG) ONLY
(5) LENGTH - SEE LIST BELOW
(4) STANDARD PACKAGING CODES - SEE LIST BELOW
(3) COLOR - SEE LIST BELOW
(2) SIZE - SEE TABLE BELOW
(1) TYPE - SEE SPEC SHEET(Q1, Q2-F, Q-150K, etc....)
STANDARD PACKAGING CODES:
MS - MINI SPOOL + LENGTH (FT or M)
QB - Q BAG (Polybag contains quantity specifi ed)
QX - Q BOX + LENGTH (FT or M)
RK - REFILL BAG
SS - STANDARD SPOOL + LENGTH (FT or M)
PART NUMBER EXAMPLE: Q2-F-3/64-01-QB48IN-25
NOTE: Table below represents information on individual spec sheet
2
3
4
6
Product Dimensions
5
1
Size
(inch)
As Supplied
(mm) After Recovered (mm) Standard
Packaging
Inside
Diameter
(max.)
Inside Diameter
(max.)
Wall Thickness
(min.)
Mini
Spool
*(MS)
(Feet)
Standard
Spool
*(SS)
(Feet)
Box Length
*(QX)
(Feet)
Cut to
Length Pcs.
*(QB)
Qty per bag
6” 48”
3/64 1.2 0.6 0.40 100 1000 50 40 25
1/16 1.6 0.8 0.40 100 1000 50 36 25
3/32 2.4 1.2 0.48 100 500 50 32 25
1/8 3.2 1.6 0.48 100 500 50 28 25
3/16 4.8 2.4 0.48 100 500 30 24 25
1/4 6.4 3.2 0.56 100 500 30 20 25
5/16 8.0 4.0 0.62 100 250 30 18 25
3/8 9.5 4.8 0.62 100 250 30 16 25
1/2 12.7 6.4 0.62 100 200 15 14 5
5/8 15.9 8.0 0.68 50 200 15 14 5
3/4 19.1 9.5 0.68 50 200 15 12 5
1 25.4 12.7 0.87 50 200 15 8 5
1 1/4 31.8 15.9 1.00 50 100 - 8 5
1 1/2 38.1 19.1 1.00 50 100 - 5 5
2 50.8 25.4 1.10 50 100 - 3 5
3 76.2 38.1 1.20 - 100 - 2 2
4 102.0 50.8 1.35 - 100 - 1 2
5 125.0 63.5 1.40 - 50 - 1 2
6 151.0 75.0 1.40 - 50 - 1 2
Operating temperature: -55°C to +135°C
Minimum shrink temperature: 70°C
Full recovery temperature: 100°C
Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V
Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259
Material: No PBB’s, PBBO’s, PBBE’s, Free of Cadmium & Lead
Standard colors: Black, red, blue, yellow, green, white, clear (class 2)
RoHS Compliant
www.Qualtekusa.com
Q2-F
ENVIRONMENT FRIENDLY, FLEXIBLE,
HIGHLY FLAME RETARDANT, HEAT SHRINKABLE TUBING
SHRINK RATIO 2:1
Features/Applications
Provides both commercial and military applications electrical insulation and protects
in-line components, disconnect terminals and splices with its high strength and
H[FHOOHQWUHVLOLHQFH%XQGOHVZLUHVIRUYHU\ÀH[LEOHOLJKWGXW\KDUQHVVHV,GHQWL¿HV
or color-codes wires, cables, terminals and components.
HEAT SHRINK THIN WALL TUBING
Product Dimensions
Notes:
1. * See page 9 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request
&OHDUWXELQJLVQRWÀDPHUHWDUGDQW8/RU&6$DSSURYHG
11
Size As Supplied
(mm) After Recovered
(mm) Standard
Packaging
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Wall Thickness
(min.)
Mini
Spool
*(MS)
(Feet)
Standard
Spool
*(SS)
(Feet)
Box
Length
*(QX)
(Feet)
Cut to
Length Pcs.
*(QB)
Qty per bag
Inch mm
6” 48”
3/64 1.2 1.2 0.6 0.40 100 1000 50 40 25
1/16 1.6 1.6 0.8 0.40 100 1000 50 36 25
3/32 2.4 2.4 1.2 0.48 100 500 50 32 25
1/8 3.2 3.2 1.6 0.48 100 500 50 28 25
3/16 4.8 4.8 2.4 0.48 100 500 30 24 25
1/4 6.4 6.4 3.2 0.56 100 500 30 20 25
5/16 8.0 8.0 4.0 0.62 100 250 30 18 24
3/8 9.5 9.5 4.8 0.62 100 250 30 16 25
1/2 12.7 12.7 6.4 0.62 100 200 15 14 5
5/8 15.9 15.9 8.0 0.68 50 200 15 14 5
3/4 19.1 19.1 9.5 0.68 50 200 15 12 5
1 25.4 25.4 12.7 0.87 50 200 15 8 5
1 1/4 31.8 31.8 15.9 1.00 50 100 - 8 5
1 1/2 38.1 38.1 19.1 1.00 50 100 - 5 5
2 50.8 50.8 25.4 1.10 50 100 - 3 5
3 76.2 76.2 38.1 1.20 - 100 - 2 2
4 102.0 102.0 50.8 1.35 - 100 - 1 2
5 125.0 125.0 63.5 1.40 - 50 - 1 2
6 151.0 151.0 75.0 1.40 - 50 - 1 2
Technical Data
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +135°C
Tensile Strength ASTM D 2671 >14 MPa
Ultimate Elongation ASTM D 2671 > 600%
Longitudinal Shrinkage UL 224 0 + 5%
Eccentricity UL 224 < 30%
Heat Aging
Tensile Strength
Ultimate Elongation 175°C, 168 hrs. > 11 MPa
> 350 %
Flammability VW-1 Pass
Dielectric Strength ASTM D 150 >20kV / mm
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 876 >10 FP
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
Technical Data
4
mu. laHS Camnlllnl
13
Size
(Inch)
As
Supplied
(mm)
After Recovered
(mm)
Standard
Packaging
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
Mini
Spool
*(MS)
(Feet)
Standard
Spool
*SS
(Feet)
Cut to
Length
Pcs.
*(QB)
Qty per
bag
6” 48”
3/64 1.2 0.60 0.20 100 1000 40 25
1/16 1.6 0.80 0.20 100 1000 36 25
3/32 2.4 1.20 0.25 100 500 32 25
1/8 3.2 1.60 0.25 100 500 28 25
3/16 4.8 2.40 0.25 100 500 24 25
1/4 6.4 3.20 0.28 100 500 20 25
3/8 9.5 4.80 0.28 100 250 16 25
1/2 12.7 6.40 0.28 100 200 14 5
HEAT SHRINK THIN WALL TUBING
Q2-CB
ULTRA THIN WALL, FLEXIBLE, ENVIRONMENT FRIENDLY
FLAME RETARDANT POLYOLEFIN TUBING
SHRINK RATIO 2:1
Features/Applications
Typically used where rapid shrinking and space saving is important. Low
shrink temperature further reduces installation time and risk of dam-
age to temperature sensitive components. Low heavy metal content
and fl ame retardant formulation make this a product that meets global
environmental standards.
Technical Data
14
Operating temperature: -55°C to +125°C
Minimum shrink temperature: 70°C
Full recovery temperature: 100°C
Approvals4: File No. E236137, File No. 242540, 125°C, VW-1, 300V
Meets: Sony-SS-00259
Material: No PBB’s, PBBO’s, PBBE’s
Cadmium content: <5 ppm, Lead content: <30 ppm
Standard color: Black
Other colors are available upon request
RoHS Compliant
Product Dimensions Product Dimensions
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. UL and CSA Approvals only for black color.
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +125°C
Tensile Strength ASTM D 2671 > 14 MPa
Ultimate Elongation ASTM D 2671 > 400%
Longitudinal Shrinkage UL 224 0 + 5%
Eccentricity ASTM D 2671 < 30%
Heat Aging
Tensile Strength
Ultimate Elongation
158°C, 168 hrs. > 350%
Flammability VW-1 Pass
Dielectric Strength IEC 243 > 20 kV / mm
Voltage Withstand ASTM D 2671 / AC 2500V, 1 min. No Breakdown
Volume Resistance ASTM D 2671 > 10 .cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
Size
(mm)
As Supplied
(mm)
After Recovered
(mm) Standard
Spool
*(SS)
(Meter)
Inside Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
1.0 1.0 0.50 0.20 200
1.5 1.5 0.75 0.20 200
2.0 2.0 1.00 0.20 200
2.5 2.5 1.25 0.25 200
3.0 3.0 1.50 0.25 200
3.5 3.5 1.75 0.25 200
4.0 4.0 2.00 0.25 200
5.0 5.0 2.50 0.28 100
6.0 6.0 3.00 0.28 100
7.0 7.0 3.50 0.28 100
8.0 8.0 4.00 0.28 100
9.0 9.0 4.50 0.28 100
10.0 10.0 5.00 0.28 100
Technical Data
www.Qualtekusa.com
u-oo-uuo laHS camplI-n: {Hm
www.Qualtekusa.com 14
Operating temperature: -55°C to +135°C
Minimum shrink temperature: 70°C
Full recovery temperature: 100°C
Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V
Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259
Material: No PBB’s, PBBO’s, PBBE’s, Free of Cadmium & Lead
Standard colors: Black, red, blue, yellow, green, white, clear (class 2)
RoHS Compliant
Q2-F
ENVIRONMENT FRIENDLY, FLEXIBLE,
HIGHLY FLAME RETARDANT, HEAT SHRINKABLE TUBING
SHRINK RATIO 2:1
Features/Applications
Provides both commercial and military applications electrical insulation and protects
in-line components, disconnect terminals and splices with its high strength and
excellent resilience. Bundles wires for very exible light-duty harnesses. Identifi es
or color-codes wires, cables, terminals and components.
HEAT SHRINK THIN WALL TUBING
Product Dimensions
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request
4. Clear tubing is not fl ame retardant, UL or CSA approved.
Size
As Supplied
(mm)
After Recovered
(mm)
Standard
Packaging
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Wall Thickness
(min.)
Mini
Spool
*(MS)
(Feet)
Standard
Spool
*(SS)
(Feet)
Box
Length
*(QX)
(Feet)
Cut to
Length Pcs.
*(QB)
Qty per bag
Inch mm
6” 48”
3/64 1.2 1.2 0.6 0.40 100 1000 50 40 25
1/16 1.6 1.6 0.8 0.40 100 1000 50 36 25
3/32 2.4 2.4 1.2 0.48 100 500 50 32 25
1/8 3.2 3.2 1.6 0.48 100 500 50 28 25
3/16 4.8 4.8 2.4 0.48 100 500 30 24 25
1/4 6.4 6.4 3.2 0.56 100 500 30 20 25
5/16 8.0 8.0 4.0 0.62 100 250 30 18 24
3/8 9.5 9.5 4.8 0.62 100 250 30 16 25
1/2 12.7 12.7 6.4 0.62 100 200 15 14 5
5/8 15.9 15.9 8.0 0.68 50 200 15 14 5
3/4 19.1 19.1 9.5 0.68 50 200 15 12 5
1 25.4 25.4 12.7 0.87 50 200 15 8 5
1 1/4 31.8 31.8 15.9 1.00 50 100 - 8 5
1 1/2 38.1 38.1 19.1 1.00 50 100 - 5 5
2 50.8 50.8 25.4 1.10 50 100 - 3 5
3 76.2 76.2 38.1 1.20 - 100 - 2 2
4 102.0 102.0 50.8 1.35 - 100 - 1 2
5 125.0 125.0 63.5 1.40 - 50 - 1 2
6 151.0 151.0 75.0 1.40 - 50 - 1 2
Technical Data
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +135°C
Tensile Strength ASTM D 2671 >14 MPa
Ultimate Elongation ASTM D 2671 > 600%
Longitudinal Shrinkage UL 224 0 + 5%
Eccentricity UL 224 < 30%
Heat Aging
Tensile Strength
Ultimate Elongation
175°C, 168 hrs. > 11 MPa
> 350 %
Flammability VW-1 Pass
Dielectric Strength ASTM D 150 >20kV / mm
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 876 >10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
Technical Data
4
RnHS Complun:
Operating temperature: -55°C to +135°C
Minimum shrink temperature: 70°C
Full recovery temperature: 100°C
Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V
Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259,
Standard color: Black
Special Colors: Red, blue, yellow, green, clear (class 2)
RoHS Compliant
www.Qualtekusa.com
Q2-F3X
HIGHLY FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING
SHRINK RATIO 3:1
Features/Applications
Outstanding physical, chemical and electrical properties make it a good choice
for electrical insulation, bundling and marking. It also prevents corrosion plus
provides mechanical protection. It’s 3:1 shrink ratio makes it suitable for applying
to irregular and diffi cult shapes.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. Clear tubing is not fl ame retardant, UL or CSA approved.
15
HEAT SHRINK THIN WALL TUBING
Technical Data
Product Dimensions
Size As Supplied
(mm)
After
Recovered
(mm)
Standard
Packaging
Inside Diameter
(min.)
Inside Diameter
(max.)
Wall Thickness
(min.)
Standard
Spool
*(SS)
(Feet)
Cut to
Length Pcs.
*(QB)
Qty per bag
Inch mm
6” 48”
1/16 1.5/0.5 1.6 0.5 0.45 500 28 25
1/8 3.0/1.0 3.2 1.0 0.55 500 24 25
3/16 4.5/1.5 4.8 1.5 0.60 500 24 25
1/4 6.0/2.0 6.4 2.0 0.65 250 20 25
3/8 9.0/3.0 9.5 3.0 0.75 250 16 25
1/2 12.0/4.0 12.7 4.0 0.80 150 14 5
3/4 18.0/6.0 19.1 6.0 0.90 150 12 5
1 24.0/8.0 25.4 8.0 1.20 150 8 5
1 1/2 39.0/13.0 39.0 13.0 1.25 150 5 5
Technical Data
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +135°C
Tensile Strength ASTM D 2671 >14 MPa
Ultimate Elongation ASTM D 2671 > 600%
Longitudinal Shrinkage UL 224 0 + 5%
Eccentricity ASTM D 2671 < 35%
Heat Aging
Tensile Strength
Ultimate Elongation
175°C, 168 hrs. > 11 MPa
> 350 %
Flammability VW-1 Pass
Dielectric Strength ASTM D 150 > 20kV / mm
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 2671 10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
4
cocoooluo laHS Comnlllnl
www.Qualtekusa.com 16
Operating temperature: -55°C to +135°C
Minimum shrink temperature: 70°C
Full recovery temperature: 100°C
Approval: File No. E236137, File No. 242540, 125°C, VW-1, 600V
Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259
Standard color: Black
Special colors: Red, blue, yellow, green
UV Resistant
RoHS Compliant
Q2-F4X
HIGH SHRINK RATIO, HIGHLY FLEXIBLE
FLAME RETARDANT POLYOLEFIN TUBING
SHRINK RATIO 4:1
Features/Applications
Manufactured with specially developed formulation and technology, it can easily
t over a large diameter connector or transition and shrink down onto a smaller
diameter jacket. Because of its outstanding physical, chemical and electrical
properties it’s widely used in some important fi elds such as military, aerospace
and ne electronic instruments for insulating or repairing harnesses, cables
and connectors.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
HEAT SHRINK THIN WALL TUBING
Technical Data
Product Dimensions
Size As Supplied
(mm)
After Recovered
(mm)
Standard
Packaging
Inch mm
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Wall Thickness
(min.)
Cut to Length Pcs.
*(QB)
Qty per bag
6” 48”
3/4 19.1/4.6 19.1 4.6 1.7 12 25
1 25.4/7.0 25.4 7.0 1.7 8 25
1 1/2 38.1/9.5 38.1 9.5 1.7 5 25
2 50.8/14.0 50.8 14.0 1.7 3 25
3 76.2/20.6 76.2 20.6 1.7 2 25
4 102.0/26.7 102.0 26.7 1.7 1 5
4 1/2 115.0/36.8 115.0 36.8 1.7 1 5
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +135°C
Tensile Strength ASTM D 2671 >14 MPa
Ultimate Elongation ASTM D 2671 > 600%
Longitudinal Shrinkage UL 224 0 + 5%
Eccentricity ASTM D 2671 < 35%
Heat Aging
Tensile Strength
Ultimate Elongation
175°C, 168 hrs. > 11 MPa
> 350 %
Flammability VW-1 Pass
Dielectric Strength ASTM D 150 > 20kV / mm
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 2671 > 10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
Operating temperature: -55°C to +135°C
Minimum shrink temperature: 70°C
Full recovery temperature: 100°C
Approvals: File No. E236137, File No. 242540, 125°C, VW-1, 600V
Meets: SAE-AMS-DTL-23053/5 Class 1 & 3, Sony-SS-00259
Standard color: Yellow & green striped
RoHS Compliant
www.Qualtekusa.com
Q2-F2X(YG), Q2-F3X(YG)
YELLOW & GREEN STRIPED, FLEXIBLE,
FLAME RETARDANT, POLYOLEFIN TUBING
SHRINK RATIO 2:1 & 3:1
Features/Applications
Dual color yellow and green striped polyolefi n tubing primarily used to identify
“ground” wires. It is exible and ame retardant with permanent color properties,
making it easy to install and identify. Used for light duty harnessing and ground
wire identifi cation.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
17
HEAT SHRINK THIN WALL TUBING
Technical Data
Product Dimensions (2:1) Q2-F2X(YG)
Size
(Inch)
As Supplied
(mm)
After Recovered
(mm) Standard
Spool
*(SS)
(Meter)
Inside Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
3/64 1.2 0.6 .33 200
1/16 1.6 0.8 .36 200
3/32 2.4 1.2 .44 200
1/8 3.2 1.6 .44 200
3/16 4.8 2.4 .56 100
1/4 6.4 3.2 .56 100
5/16 8.0 4.0 .56 100
3/8 9.5 4.8 .56 100
1/2 12.7 6.4 .65 50
5/8 16.0 8.0 .69 50
3/4 19.1 9.5 .80 50
1 25.4 12.7 .90 50
1 1/4 31.8 15.9 .90 50
2 1/2 38.1 19.1 1.02 50
2 50.8 25.4 1.02 50
3 76.2 38.1 1.20 30
4 101.6 50.8 1.30 30
Product Dimensions (3:1) Q2-F3X(YG)
Size
(Inch)
As Supplied
(mm)
After Recovered
(mm) Standard
Spool
*(SS)
(Meter)
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
1/16 1.6/0.5 1.6 0.5 0.51 200
3/32 2.4/0.8 2.4 0.8 0.51 200
1/8 3.2/1.0 3.2 1.0 0.55 200
3/16 4.8/1.5 4.8 1.5 0.60 100
1/4 6.4/2.0 6.4 2.0 0.65 100
3/8 9.5/3.0 9.5 3.0 0.75 100
1/2 12.7/4.0 12.7 4.0 0.75 50
3/4 19.1/6.0 19.1 6.0 0.85 50
1 25.4/8.0 25.4 8.0 1.00 50
1 1/2 39/13.0 39.0 13.0 1.15 50
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +135°C
Tensile Strength ASTM D 2671 >14 MPa
Ultimate Elongation ASTM D 2671 > 600%
Longitudinal Shrinkage UL 224 0 + 5%
Eccentricity ASTM D 2671 < 35%
Heat Aging
Tensile Strength
Ultimate Elongation
175°C, 168 hrs. > 11 MPa
> 350 %
Flammability VW-1 Pass
Dielectric Strength ASTM D 150 > 20kV / mm
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 2671 >10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
IaNS camnIIInI
www.Qualtekusa.com 18
Q2-HF
LOW SMOKE, HALOGEN FREE,
FLAME RETARDANT, HEAT SHRINKABLE TUBING
SHRINK RATIO 2:1
Features/Applications
As a kind of totally environmental friendly heat-shrinkable tube, it is made with specially
designed halogen free polyolefi n. It produces neither toxic smoke or harmful substance
when burning, which meets the growing demand of environmental protection all over
the world. In addition to the common ne physical and chemical specifi cations the tube
also shows excellent ame-retardant, insulation, low temperature shrinking and exible
properties and thus is widely used in electronics, communication and the auto industry.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
Operating temperature: -55°C to +105°C
Minimum shrink temperature: 70°C
Full recovery temperature: 100°C
Approvals: File No. 242540
Standard colors: Black, white
Other colors are available upon request.
RoHS Compliant
HEAT SHRINK THIN WALL TUBING
Technical Data
Product Dimensions
Size
(mm)
As Supplied
(mm)
After Recovered
(mm) Standard
Spool
*(SS)
(Meter)
Inside Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
15.0 15.0 7.50 0.69 50
16.0 16.0 8.00 0.69 50
18.0 18.0 9.00 0.80 50
20.0 20.0 10.00 0.80 50
22.0 22.0 11.00 0.80 50
25.0 25.0 12.50 0.90 50
28.0 28.0 14.00 0.90 50
30.0 30.0 15.00 0.90 50
35.0 35.0 17.50 0.90 50
40.0 40.0 20.00 1.00 50
50.0 50.0 25.00 1.00 50
60.0 60.0 30.00 1.00 30
70.0 70.0 35.00 1.20 30
80.0 80.0 40.00 1.20 30
100.0 100.0 50.00 1.30 30
125.0 125.0 60.00 1.30 15
150.0 150.0 75.00 1.30 15
Product Dimensions
Size
(mm)
As Supplied
(mm)
After Recovered
(mm) Standard
Spool
*(SS)
(Meter)
Inside Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
1.0 1.0 0.50 .33 200
1.5 1.5 0.75 .36 200
2.0 2.0 1.00 .44 200
2.5 2.5 1.25 .44 200
3.0 3.0 1.50 .44 200
3.5 3.5 1.75 .44 200
4.0 4.0 2.00 .44 200
5.0 5.0 2.50 .56 100
6.0 6.0 3.00 .56 100
7.0 7.0 3.50 .56 100
8.0 8.0 4.00 .56 100
9.0 9.0 4.50 .56 100
10.0 10.0 5.00 .56 100
11.0 11.0 5.50 .56 100
12.0 12.0 6.00 .56 50
13.0 13.0 6.50 .65 50
14.0 14.0 7.00 .69 50
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +105°C
Tensile Strength ASTM D 2671 >12 MPa
Ultimate Elongation ASTM D 2671 > 400%
Longitudinal Shrinkage UL 224 0 + 5%
Eccentricity ASTM D 2671 < 30%
Heat Aging
Tensile Strength
Ultimate Elongation
158°C, 168 hrs. > 11 MPa
> 200 %
Flammability VW-1 Self extinguish in 30 sec.
Dielectric Strength ASTM D 150 > 20kV / mm
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 2671 10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
.o-o-oo laHS Camnlllnl
www.Qualtekusa.com
Q2-LS
VERY LOW SHRINK TEMPERATURE, FLEXIBLE,
HALOGEN FREE, POLYOLEFIN TUBING
SHRINK RATIO 2:1
Features/Applications
Manufactured with modifi ed radiation cross-linked polyolefi n. This specially designed
halogen free formulation makes the tubing very fl exible and shrinks at low temperature.
Suitable for applications where heat sensitive components are used and quick shrinkage is
required. The ammability of the tubing meets the automotive ame propagation standard
FMVSS 302. Although very fl exible, it has good mechanical and electrical performance.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. To ensure dimensional stability, Q2-LS should be stored at temperature below 40°C/104°F
Operating temperature: -55°C to +125°C
Minimum shrink temperature: 65°C
Full recovery temperature: 95°C
Approvals: File No. 242540
Meets: SONY-SS-00259
Standard color: Black
RoHS Compliant
19
HEAT SHRINK THIN WALL TUBING
Technical Data
Product Dimensions
Size
(Inch)
As Supplied (mm) After Recovered
(mm) Standard Packaging
Inside Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
Mini Spool
(MS)*
(Feet)
Standard
Spool
(SS)*
(Feet)
Cut to Length
Pcs.
(QB)*
Qty per bag
6” 48”
1/16 1.6 0.8 0.5 100 1000 36 25
3/32 2.4 1.2 0.5 100 500 32 25
1/8 3.2 1.6 0.5 100 500 28 25
3/16 4.8 2.4 0.5 100 500 24 25
1/4 6.4 3.2 0.6 100 500 20 25
5/16 8.0 4.0 0.6 100 250 18 25
3/8 9.5 4.8 0.6 100 250 16 25
1/2 12.7 6.4 0.6 100 200 14 5
5/8 16.0 8.0 0.6 50 200 14 5
3/4 19.1 9.5 0.8 50 200 12 5
1 25.4 12.7 0.9 50 200 8 5
1 1/4 31.8 15.9 0.9 50 100 8 5
1 1/2 38.1 19.1 1.0 50 100 5 5
2 50.8 25.4 1.1 50 100 3 5
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +125°C
Tensile Strength ASTM D 2671 >12 MPa
Ultimate Elongation ASTM D 2671 > 400%
Longitudinal Shrinkage UL 224 0 + 5%
Eccentricity ASTM D 2671 < 30%
Heat Aging
Tensile Strength
Ultimate Elongation
158°C, 168 hrs. > 11 MPa
> 200 %
Flammability FMVSS 302 Pass
Dielectric Strength ASTM D 150 > 20kV / mm
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 2671 10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
coco-co laHS Camnlllnl :“m
www.Qualtekusa.com 20
Q2-R
SEMI-RIGID, MULTI-PURPOSE,
FLAME RETARDANT, POLYOLEFIN TUBING
SHRINK RATIO 2:1
Features/Applications
Outstanding physical, chemical and electrical properties. Widely used for insulation
of harnesses and connectors in such elds as military, aerospace and ne electronic
instruments. Resistant to common fl uids and solvents.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. Clear tubing is not fl ame retardant, UL or CSA approved.
Operating temperature: -55°C to +135°C
Minimum shrink temperature: 70°C
Full recovery temperature: 130°C
Approvals : File No. E236137, File No. 242540,125°C, VW-1, 600V
Meets: SAE-AMS-DTL-23053/6 Class 1 & 2, Sony SS-00259
Standard colors: Black, clear (Non-fl ame retardant)
RoHS Compliant
HEAT SHRINK THIN WALL TUBING
Technical Data
Product Dimensions
Size
(Inch)
As Supplied (mm) After Recovered
(mm) Standard Packaging
Inside Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
Mini Spool
*(MS)
(Feet)
Standard
Spool
*(SS)
(Feet)
Cut to
Length Pcs.
*(QB)
Qty per bag
6” 48”
3/64 1.2 0.6 0.4 100 500 40 25
1/16 1.6 0.8 0.4 100 500 36 25
3/32 2.4 1.2 0.5 100 500 32 25
1/8 3.2 1.6 0.5 100 500 28 25
3/16 4.8 2.4 0.5 100 250 24 25
1/4 6.4 3.2 0.6 100 250 20 25
3/8 9.5 4.8 0.6 100 250 16 25
1/2 12.7 6.4 0.6 100 150 14 5
5/8 16.0 8.0 0.7 50 150 14 5
3/4 19.1 9.5 0.7 50 150 12 5
1 25.4 12.7 0.9 50 150 8 5
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +135°C
Tensile Strength ASTM D 2671 >16 MPa
Ultimate Elongation ASTM D 2671 > 500%
Longitudinal Shrinkage UL 224 0 + 5%
Eccentricity ASTM D 2671 < 30%
Heat Aging
Tensile Strength
Ultimate Elongation
175°C, 168 hrs. > 12 MPa
> 350 %
Flammability VW-1 Pass
Dielectric Strength ASTM D 150 > 20kV / mm
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 2671 10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
4
lnHS Compmm
www.Qualtekusa.com
Q2-Z
ENVIRONMENT FRIENDLY, FLEXIBLE
FLAME RETARDANT, HEAT SHRINKABLE TUBING
SHRINK RATIO 2:1
Features/Applications
An environment friendly, ame retardant shrink tubing. Specially designed formulation
to meet UL 224 and CSA 22.2 on the basis of no harmful substance such as PBB, PBBE,
PBBO and toxic metal compounds. Widely used for insulation, strain relief, harnessing,
bundling and color coding of wire with a low shrink temperature. Good exibility
and superior mechanical strength in such elds as electronics, communication
and automobile.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
Operating temperature: -55°C to +125°C
Minimum shrink temperature: 70°C
Full recovery temperature: 100°C
Approvals: File No. E236137, File No. 242540, 125°C,VW-1, 600V
Meets: Sony SS-00259,
Material: No PBB’s, PBBO’s, PBBE’s
Cadmium content <5 ppm, Lead content <10 ppm
Standard colors: Black, red, blue, yellow, green, white
Other colors are available upon request.
RoHS Compliant
21
HEAT SHRINK THIN WALL TUBING
Product Dimensions
Size
(mm)
As Supplied
(mm)
After Recovered
(mm) Standard
Spool
*(SS)
(Meter)
Inside Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
1.0 1.0 0.50 0.33 200
1.5 1.5 0.75 0.36 200
2.0 2.0 1.00 0.44 200
2.5 2.5 1.25 0.44 200
3.0 3.0 1.50 0.44 200
3.5 3.5 1.75 0.44 200
4.0 4.0 2.00 0.44 200
5.0 5.0 2.50 0.56 100
6.0 6.0 3.00 0.56 100
7.0 7.0 3.50 0.56 100
8.0 8.0 4.00 0.56 100
9.0 9.0 4.50 0.56 100
10.0 10.0 5.00 0.56 100
11.0 11.0 5.50 0.56 100
12.0 12.0 6.00 0.56 50
13.0 13.0 6.50 0.65 50
14.0 14.0 7.00 0.69 50
15.0 15.0 7.50 0.69 50
16.0 16.0 8.00 0.69 50
18.0 18.0 9.00 0.80 50
20.0 20.0 10.00 0.80 50
22.0 22.0 11.00 0.80 50
25.0 25.0 12.50 0.90 50
28.0 28.0 14.00 0.90 50
30.0 30.0 15.00 0.90 50
35.0 35.0 17.50 0.90 50
40.0 40.0 20.00 1.00 50
50.0 50.0 25.00 1.00 50
60.0 60.0 30.00 1.00 30
70.0 70.0 35.00 1.20 30
80.0 80.0 40.00 1.20 30
100.0 100.0 50.80 1.30 30
125.0 125.0 63.50 1.30 15
150.0 150.0 76.00 1.30 15
Product Dimensions
Size
(Inch)
As Supplied
(mm)
After Recovered
(mm) Standard Packaging
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thick-
ness
(min.)
Mini
Spool
*(MS)
(Feet)
Standard
Spool
*(SS)
(Feet)
Box
Length
*(QX)
(Feet)
Cut to
Length Pcs.
*(QB)
Qty per bag
6” 48”
3/64 1.2 0.60 0.33 100 1000 50 40 25
1/16 1.6 0.80 0.36 100 1000 50 36 25
3/32 2.4 1.20 0.44 100 500 50 32 25
1/8 3.2 1.60 0.44 100 500 50 28 25
3/16 4.8 2.40 0.56 100 500 30 24 25
1/4 6.4 3.20 0.56 100 500 30 20 25
5/16 8.0 4.00 0.56 100 250 30 18 25
3/8 9.5 4.80 0.56 100 250 30 16 25
1/2 12.7 6.40 0.65 100 200 15 14 5
5/8 16.0 8.00 0.69 50 200 15 14 5
3/4 19.1 9.50 0.80 50 200 15 12 5
1 25.4 12.70 0.90 50 200 15 8 5
1 1/4 31.8 15.90 0.90 50 100 - 8 5
1 1/2 38.1 19.10 1.02 50 100 - 5 5
2 50.8 25.40 1.02 50 100 - 3 5
3 76.2 38.10 1.20 - 100 - 2 2
4 101.6 50.80 1.30 - 100 - 1 2
5 126.0 63.50 1.30 - 50 - 1 2
6 150.0 76.00 1.30 - 50 - 1 2
14
Technical Data
Property Test Method Typical Data
Operating Temperature UL 224 -55°C to +125°C
Tensile Strength ASTM D 2671 > 14 MPa
Ultimate Elongation ASTM D 2671 > 400%
Longitudinal Shrinkage UL 224 0 + 5%
Eccentricity ASTM D 2671 < 30%
Heat Aging
Tensile Strength
Ultimate Elongation
158°C, 168 hrs. > 12 MPa
> 350%
Flammability VW-1 Pass
Voltage Withstand ASTM D 2671 / AC 2500, 1 min. No Breakdown
Volume Resistance IEC 93 > 10 .cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
RnHS Complun:
www.Qualtekusa.com 22
Operating temperature: -55°C to +125°C
Minimum shrink temperature: 70°C
Full recovery temperature: 100°C
Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V
Meets: Sony-SS-00259
Standard colors: Black, red, blue, yellow, green, white, clear
Other colors are available upon request.
RoHS Compliant
Q2-3X
FLEXIBLE, THIN WALL FLAME RETARDANT POLYOLEFIN TUBING
SHRINK RATIO 3:1
Features/Applications
Widely used for electrical insulation. Protects in-line components, disconnect
terminals and splices with its high strength and excellent resilience. Bundles
wires for very exible light-duty harnesses. Identifi es or color-codes wires, cables,
terminals and components. Free from environment harmful substances such as
PBB’s, PBBO’s, PBBE’s and toxic heavy metal compounds in its components.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. Clear tubing is not fl ame retardant, UL or CSA approved.
HEAT SHRINK THIN WALL TUBING
Technical Data
Product Dimensions
Size As Supplied
(mm)
After Recovered
(mm)
Standard
Packaging
Inch mm
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Wall Thickness
(min.)
Standard
Spool
*(SS)
(Feet)
Cut to Length Pcs.
*(QB)
Qty per bag
6” 48”
1/16 1.5/0.5 1.6 0.5 0.45 500 28 25
1/8 3.0/1.0 3.2 1.0 0.55 500 24 25
3/16 4.5/1.5 4.8 1.5 0.60 500 24 25
1/4 6.0/2.0 6.4 2.0 0.65 250 20 25
3/8 9.0/3.0 9.5 3.0 0.75 250 16 25
1/2 12.0/4.0 12.7 4.0 0.80 150 14 5
3/4 18.0/6.0 19.1 6.0 0.90 150 12 5
1 24.0/8.0 25.4 8.0 1.00 150 8 5
1 1/2 39.0/13.0 39.0 13.0 1.25 150 5 5
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +125°C
Tensile Strength ASTM D 2671 >14 MPa
Ultimate Elongation ASTM D 2671 > 400%
Longitudinal Shrinkage UL 224 0 + 5%
Eccentricity ASTM D 2671 < 30%
Heat Aging
Tensile Strength
Ultimate Elongation
158°C, 168 hrs. > 12 MPa
> 350 %
Flammability VW-1 Pass
Dielectric Strength ASTM D 150 > 20kV / mm
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 2671 10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
4
Property Test Method Typical Data
Tensile Strength ASTM D 2671 > 30 MPa
Ultimate Elongation ASTM D 2671 > 150%
Flammability VW-1 Pass
Volume Resistance IEC 93 >10 Ω.cm
Copper Stability 180°C, 168 hrs. Pass
Copper Corrosion 180°C, 168 hrs. No Corrosion
www.Qualtekusa.com
Q-150K
150°C , BLACK, MODIFIED THIN WALL FLEXIBLE PVDF TUBING
SHRINK RATIO 2:1
Features/Applications
Excellent ame-retardant, heat shrinkable polyvinylidence uoride tubing for
applications requiring high temperature performance, outstanding abrasion and
cut-through resistance or superior chemical and solvent resistant properties. It
reliably protects solder joints, terminals and connectors from most industrial uids,
solvents and chemicals.
HEAT SHRINK THIN WALL TUBING Qualtek Electronics
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
Operating temperature: -55°C to +150°C
Minimum shrink temperature: 135°C
Full recovery temperature: 150°C
Approval: UL VW-1, File No. E245010
Meets: SAE-AMS-DTL-23053/18
Standard colors: Black, Clear
RoHS Compliant
23
HEAT SHRINK THIN WALL TUBING
Technical Data
Product Dimensions
Size As Supplied
(mm)
After Recovered
(mm)
Tubing
Shape
Standard
Packaging
Inch mm
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
Standard
Spool
*(SS)
(Meter)
Cut to Length Pcs.
*(QB)
Qty per bag
6” 48”
3/64 1.2 1.2 0.6 0.26 Round 200 32 25
1/16 1.6 1.6 0.8 0.26 Round 200 28 25
3/32 2.4 2.4 1.2 0.26 Round 200 24 25
1/8 3.2 3.2 1.6 0.26 Round 100 20 25
3/16 4.8 4.8 2.4 0.26 Round 100 16 25
1/4 6.4 6.4 3.2 0.26 Round 100 12 25
3/8 9.5 9.5 4.8 0.30 Flat 50 8 25
1/2 12.7 12.7 6.4 0.30 Flat 50 4 5
3/4 19.1 19.1 9.5 0.41 Flat 50 2 5
1 25.4 25.4 12.7 0.41 Flat 50 1 5
1 1/2 38.1 38.1 19.0 0.51 Flat 50 1 5
14
Product Dimensions
RaHS complain:
www.Qualtekusa.com 24
Q-175K
175°C , CLEAR, SEMI-RIGID, HIGH TEMPERATURE,
CHEMICAL RESISTANT PVDF TUBING
SHRINK RATIO 2:1
Features/Applications
Semi-rigid ame retardant heat shrinkable polyvinylidene uoride tubing for
applications requiring high temperature performance, outstanding abrasion and
cut-through resistance or superior chemical and solvent resistant properties. It
reliably protects wires, solder joints, terminals, connectors and components from
most industrial fl uids, solvents and chemicals.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
Operating temperature: -55°C to +175°C
Full recovery temperature: 175°C
Approval: UL VW-1, File No. E245010
Meets: SAE-AMS-DTL-23053/18
Standard color: Clear
RoHS Compliant
HEAT SHRINK THIN WALL TUBING
13
Technical Data
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +175°C
Tensile Strength ASTM D 2671 > 34.5 MPa
Ultimate Elongation ASTM D 2671 > 150%
Ultimate Elongation After Aging 250°C, 168 hrs. > 100%
Heat Shock 300°C,1 hr. No cracking
Cold Bend -55°C, 1 hr. No cracking
Dielectric Strength ASTM D 2671 > 30 kV / mm
Volume Resistance IEC 93 > 10 .cm
Flammability VW-1 Pass
Product Dimensions
Size As Supplied
(mm)
After Recovered
(mm)
Standard
Packaging
Inch mm
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Wall Thickness
(min.)
Standard
Spool
*(SS)
(Meter)
Cut to Length Pcs.
*(QB)
Qty per bag
6” 48”
3/64 1.2 1.2 0.6 0.20 200 32 25
1/16 1.6 1.6 0.8 0.20 200 28 25
3/32 2.4 2.4 1.2 0.23 200 24 25
1/8 3.2 3.2 1.6 0.23 200 20 25
3/16 4.8 4.8 2.4 0.23 100 16 25
1/4 6.4 6.4 3.2 0.28 100 12 25
3/8 9.5 9.5 4.8 0.28 - 8 25
1/2 12.7 12.7 6.4 0.28 - 4 5
3/4 19.1 19.1 9.5 0.36 - 2 5
1 25.4 25.4 12.7 0.41 - 1 5
1 1/2 38.1 38.1 19.0 0.51 - 1 5
laHS camplI-n:
www.Qualtekusa.com
Q-200E
200°C, VERY FLEXIBLE
MODIFIED FLUOROELASTOMER TUBING (Viton® )
SHRINK RATIO 2:1
Features/Applications
Q-200E is made from modifi ed uoroelastomer with superior impact, abrasion and
cut-through resistance. Used for applications requiring high resistance to corrosive
uids, fuels, lubricants, acids and solvents at elevated temperatures. Very exible
at high and low temperatures without cracking.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. Viton® is a registered trademark of E.I. Du Pont de Nemours and Co. Inc.
Operating temperature: -55°C to +200°C
Minimum shrink temperature: 150°C
Full recovery temperature: 175°C
Approval: UL VW-1, File No. E245010
Meets: SAE-AMS-DTL-23053/13
Standard Color: Black
RoHS Compliant
25
HEAT SHRINK THIN WALL TUBING
14
Technical Data
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +200°C
Tensile Strength ASTM D 2671 > 8.5 MPa
Elongation at Break ASTM D 2671 > 250%
Elongation at Break After Aging 250°C, 168 hrs. > 8MPa
> 200%
Heat Shock 300°C, 4 hrs. No cracking or dropping
Flexibility ASTM D 412 < 13.8 MPa
Dielectric Strength ASTM D 2671 > 7.9kV / mm
Volume Resistance ASTM D 876 > 10 .cm
Copper Corrosion UL 224 No corrosion
Flammability ASTM D 2671 Self-extinguish in 15 sec.
Product Dimensions
Size As Supplied
(mm)
After Recovered
(mm)
Tubing
Shape
Standard
Packaging
Inch mm
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
Standard
Spool
*(SS)
(Meter)
Cut to Length Pcs.
*(QB)
Qty per bag
6” 48”
1/8 3.2 3.2 1.6 0.76 Round 50 20 25
3/16 4.8 4.8 2.4 0.90 Round 50 16 25
1/4 6.4 6.4 3.2 0.90 Round 50 12 25
3/8 9.5 9.5 4.8 0.90 Round 50 8 25
1/2 12.7 12.7 6.4 1.10 Round 30 4 5
3/4 19.1 19.1 9.5 1.30 Round 30 2 5
1 25.4 25.4 12.7 1.65 Flat 30 1 5
1 1/2 38.1 38.1 19.1 1.90 Flat 15 1 5
2 50.8 50.8 25.4 2.80 Flat 15 1 5
KnHS Comnlllnl
www.Qualtekusa.com 26
Q-PTFE
PTFE HEAT SHRINKABLE TUBING
Features/Applications
Q-PTFE heat shrinkable tubing is manufactured with polytetrafl uoroethylene (PTFE).
It is specially designed for applications where high temperature and chemical
resistance is required. This tubing works great as an electrical insulator and where
highly fl ame retardant properties are required, such as in the automotive, military
and aerospace fi elds.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
Operating temperature: -65°C to +260°C
Full recovery temperature: 350°C
Meets: SAE-AMS-DTL-23053/12
Standard color: Clear
RoHS Compliant
HEAT SHRINK THIN WALL TUBING
Product Dimensions
Size
(AWG)
As Supplied (mm) After Recovered
(mm)
Standard
Packaging
Inside Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
Cut to
Length Pcs.
*(QB)
Qty per bag
(48” pcs.)
20 1.52 0.97 0.30 25
18 1.93 1.17 0.30 25
16 2.36 1.45 0.30 25
14 3.05 1.82 0.30 25
12 3.81 2.26 0.30 25
10 4.85 2.80 0.30 25
8 6.10 3.55 0.38 5
6 7.67 4.40 0.38 5
4 9.40 5.45 0.38 5
2 10.92 6.90 0.38 5
0 11.94 8.56 0.38 5
18
Technical Data
Property Test Method Typical Data
Tensile Strength ASTM D 2671 > 17.3 MPa
Ultimate Elongation ASTM D 2671 > 200%
Specifi c Gravity ASTM D 792 2.30
Heat Shock (400°C, 4hrs.) ASTM D 2671 No cracking or dropping
Cold Bend Test (-65°C, 4hrs.) ASTM D 2671 No cracking
Volume Resistance ASTM D 2671 > 10 .cm
Dielectric Strength ASTM D 2671 > 34kV/mm
Copper Corrosion UL 224 Pass
Flammability ASTM D 2671 Self-extinguish
Fluid Resistance SAE-AMS-DTL-23053/12 Excellent
Water Absorption ASTM D 570 < 0.1
£1an Compmm
27
Operating temperature: -45°C to +125°C
Minimum shrink temperature: 100°C
Full recovery temperature: 125°C
Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V
Meets: Sony-SS-00259, SAE-AMS-DTL-23053/4
Standard color: Black
Special colors: Red, blue, white, yellow, clear(non-fl ame retardant jacket)
RoHS Compliant
www.Qualtekusa.com
Q5-2X
DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING
SHRINK RATIO 2:1
Features/Applications
Heat shrinkable dual wall adhesive lined tubing is manufactured by co-extrusion of
polyolefi n and hot-melt adhesive. Designed to provide both insulation and sealing
for protection against water and moisture of auto wires, shipping cables, metal tubes
and bundled wires.
Technical Data
Product Dimensions
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. Clear and color tubing other than black are not fl ame retardant, UL or CSA approved.
HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED
14
Property Test Method Typical Data
Tensile Strength ASTM D 2671 10.4 MPa (min.)
Tensile Strength After Aging ASTM D 2671 158°C, 168 hrs., remains 70%
Elongation at Break ASTM D 2671 200% (min.)
Elongation at Break After Aging (158°C, 168 hrs.) ASTM D 2671 100% (min.)
Longitudinal Shrinkage UL 224 0 ± 10%
Heat Shock 250°C, 4 hrs. No cracking, no dropping
Cold Bend ( -30°C, 1 hr.) ASTM D 2671 No cracking
Voltage Withstand (AC 2500V, 60 seconds) ASTM D 2671 No breakdown
Break Down Voltage ASTM D 2671 AC 2500V (min.)
Volume Resistance ASTM D 876 Min. 10 .cm (min.)
Flammability SAE-AMS-DTL-23053/4 Self extinguish in 30 seconds
Copper Corrosion (158°C, 168 hrs.) UL 224 Pass
Water Absorption ASTM D 570 < 0.5%
Size As Supplied
(mm)
After Recovered
(mm)
Standard
Packaging
Inch mm
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Total Wall
Thickness
(min.)
Adhesive
Thickness
(nom.)
Standard
Spool
*(SS)
(Meter)
Cut to Length
Pcs.
*(QB)
Qty per bag
6” 48”
1/8 3.2/1.6 3.20 1.6 0.70 0.20 200 28 25
3/16 4.8/2.4 4.80 2.4 0.70 0.20 100 24 25
1/4 6.4/3.2 6.40 3.2 0.75 0.20 100 20 25
3/8 9.5/4.8 9.50 4.8 0.75 0.20 50 16 25
1/2 12.7/6.4 12.70 6.4 0.75 0.20 25 14 5
3/4 19.1/9.6 19.10 9.5 0.90 0.20 25 12 5
1 25.4/12.7 25.40 12.7 1.10 0.20 25 8 5
1 1/2 38.1/19.0 38.10 19.0 1.10 0.20 25 5 5
4
:flm IaNS camnlllnl
www.Qualtekusa.com 28
Operating temperature: -55°C to +125°C
Minimum shrink temperature: 80°C
Full recovery temperature: 110°C
Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V
Meets: Sony-SS-00259, SAE-AMS-DTL-23053/4
Standard color: Black
Special colors: Red, blue, white, yellow, clear(non-fl ame retardant jacket)
RoHS Compliant
Q5-3X
DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING
SHRINK RATIO 3:1
Features/Applications
Heat shrinkable dual wall adhesive lined tubing is manufactured by co-extrusion
of polyolefi n and hot-melt adhesive. It is designed to provide both insulation and
sealing for protection against water and moisture of auto wires, shipping cables,
metal tubes and bundled wires.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. Clear tubing and color tubing other than black are not fl ame retardant, UL or CSA approved.
HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED
Technical Data
Product Dimensions
Size As Supplied
(mm)
After Recovered
(mm)
Standard
Packaging
Inch mm
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Total Wall
Thickness
(min.)
Adhesive
Thickness
(nom.)
Standard
Spool
*(SS)
(Meter)
Cut to Length
Pcs.
*(QB)
Qty per bag
6” 48”
1/8 3.0/1.0 3.0 1.0 1.00 0.5 200 28 25
3/16 4.8/1.5 4.8 1.5 1.00 0.5 100 24 25
1/4 6.0/2.0 6.0 2.0 1.00 0.5 100 20 25
3/8 9.0/3.0 9.0 3.0 1.40 0.6 50 16 25
1/2 12.0/4.0 12.0 4.0 1.60 0.8 25 14 5
3/4 19.0/6.0 19.0 6.0 2.15 0.8 25 12 5
1 24.0/8.0 24.0 8.0 2.40 1.0 25 8 5
1 1/4 30.0/10.0 30.0 10.0 2.40 1.0 25 5 5
1 1/2 40.0/13.0 40.0 13.0 2.40 1.0 25 5 5
2 50.0/19.0 50.0 19.0 2.40 1.0 25 3 5
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +125°C
Tensile Strength ASTM D 2671 >12 MPa
Ultimate Elongation ASTM D 2671 > 400%
Longitudinal Shrinkage UL 224 0 ± 10%
Eccentricity ASTM D 2671 < 40%
Heat Aging
Tensile Strength
Ultimate Elongation
158°C, 168 hrs. > 11 MPa
> 350 %
Flammability VW-1 Pass
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 2671 >10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
Property of adhesive
Ring-Ball Soft Point ASTM E28 95°C + 5°C
4
laHS camplI-n: mm @- out-Iot-
www.Qualtekusa.com
Q5-4X
DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING
SHRINK RATIO 4:1
Features/Applications
Heat shrinkable dual wall adhesive lined tubing is manufactured by co-extrusion
of polyolefi n and hot-melt adhesive. Designed to provide both insulation and
sealing for protection against water and moisture of auto wires, shipping cables,
metal tubes and bundled wires.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. Clear tubing and color tubing other than black are not fl ame retardant, UL or CSA approved.
Operating temperature: -55°C to +125°C
Minimum shrink temperature: 80°C
Full recovery temperature: 110°C
Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V
Meets: Sony-SS-00259, SAE-AMS-DTL-23053/4
Standard color: Black
Special colors: Red, blue, white, yellow, clear
RoHS Compliant
29
HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED
Product Dimensions
Size As Supplied
(mm)
After Recovered
(mm)
Standard
Packaging
Inch mm
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Total Wall
Thickness
(min.)
Adhesive
Thickness
(nom.)
Standard
Spool
*(SS)
(Meter)
Cut to Length
Pcs.
*(QB)
Qty per bag
6” 48”
3/16 4/1 4.0 1.0 1.00 0.5 100 24 25
1/4 6/1.5 6.0 1.5 1.00 0.5 100 20 25
5/16 8/2 8.0 2.0 1.00 0.5 50 18 25
1/2 12/3 12.0 3.0 1.40 0.6 25 14 5
5/8 16/4 16.0 4.0 1.60 0.8 25 14 5
1 24/6 24.0 6.0 2.15 0.8 25 12 5
1 1/4 32/8 32.0 8.0 2.40 1.0 25 8 5
2 52/13 52.0 13.0 2.40 1.0 - 5 5
Technical Data
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +125°C
Tensile Strength ASTM D 2671 >12 MPa
Ultimate Elongation ASTM D 2671 > 400%
Longitudinal Shrinkage UL 224 0 ± 10%
Eccentricity ASTM D 2671 < 40%
Heat Aging
Tensile Strength
Ultimate Elongation
158°C, 168 hrs. > 11 MPa
> 350 %
Flammability VW-1 Pass
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 2671 >10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
Property of adhesive
Ring-Ball Soft Point ASTM E28 95°C + 5°C
4
ocooo-o :flm IaNS ColellM
www.Qualtekusa.com 30
Operating temperature: -55°C to +125°C
Minimum shrink temperature: 70°C
Full recovery temperature: 110°C
Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V
Meets: SAE-AMS-DTL-23053/4, Sony-SS-00259
Standard color: Black
RoHS Compliant
Q5-F3X
DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING
SHRINK RATIO 3:1
Features/Applications
Q5-F3X is manufactured by co-extrusion of polyolefi n and meltable adhesive. It is
designed to provide insulation and create a tight seal for protected articles. Typical
applications are environmental sealing of electrical components such as wire splices
and harnesses in the automotive and communication industry.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. Clear tubing and color tubing other than black are not fl ame retardant, UL or CSA approved.
HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED
Technical Data
Product Dimensions
Size As Supplied
(mm)
After Recovered
(mm)
Standard
Packaging
Inch mm
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Total Wall
Thickness
(min.)
Adhesive
Thickness
(nom.)
Standard
Spool
*(SS)
(Meter)
Cut to Length
Pcs.
*(QB)
Qty per bag
6” 48”
1/8 3/1 3.0 1.0 1.00 0.5 200 28 25
3/16 4.8/1.5 4.8 1.5 1.00 0.5 100 24 25
1/4 6/2 6.0 2.0 1.00 0.5 100 20 25
3/8 9/3 9.0 3.0 1.40 0.6 50 16 25
1/2 12/4 12.0 4.0 1.60 0.8 25 14 5
3/4 19/6 19.0 6.0 2.15 0.8 25 12 5
1 24/8 24.0 8.0 2.40 1.0 25 8 5
1 1/2 40/13 40.0 13.0 2.40 1.0 25 5 5
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +125°C
Tensile Strength ASTM D 2671 >13 MPa
Ultimate Elongation ASTM D 2671 > 400%
Longitudinal Shrinkage UL 224 0 ± 10%
Eccentricity ASTM D 2671 < 40%
Heat Aging
Tensile Strength
Ultimate Elongation
158°C, 168 hrs. > 11 MPa
> 300 %
Flammability VW-1 Pass
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 2671 > 10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
Property of adhesive
Ring-Ball Soft Point ASTM E28 95°C + 5°C
4
zflm RaHS camplI-M
www.Qualtekusa.com
Q5-F4X
DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING
SHRINK RATIO 4:1
Features/Applications
Q5-F4X is manufactured by co-extrusion of polyolefi n and meltable adhesive. It
is designed to provide insulation and a tight seal for protected articles. Typical
applications are environmental sealing of electrical components such as wire
splices and harnesses in the automotive and communication industry.
Operating temperature: -55°C to +125°C
Minimum shrink temperature: 70°C
Full recovery temperature: 110°C
Approvals : File No. E236137, File No. 242540, 125°C, VW-1, 600V
Meets: SAE-AMS-DTL-23053/4, Sony-SS-00259
Standard color: Black
RoHS Compliant
31
HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. Clear tubing and color tubing other than black are not fl ame retardant, UL or CSA approved.
Product Dimensions
Size As Supplied
(mm)
After Recovered
(mm)
Standard
Packaging
Inch mm
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Total Wall
Thickness
(min.)
Adhesive
Thickness
(nom.)
Standard
Spool
*(SS)
(Meter)
Cut to Length
Pcs.
*(QB)
Qty per bag
6” 48”
3/16 4/1 4.0 1.0 1.00 0.5 100 24 25
5/16 8/2 8.0 2.0 1.00 0.5 50 18 25
1/2 12/3 12.0 3.0 1.40 0.6 25 14 5
5/8 16/4 16.0 4.0 1.60 0.8 25 14 5
1 24/6 24.0 6.0 2.15 0.8 25 8 5
1 1/4 32/8 32.0 8.0 2.40 1.0 25 5 5
1 1/2 38.1/9.5 38.1 9.5 2.40 1.0 25 5 5
2 52/13 52.0 13.0 2.40 1.0 - 3 5
Technical Data
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +125°C
Tensile Strength ASTM D 2671 >13 MPa
Ultimate Elongation ASTM D 2671 > 400%
Longitudinal Shrinkage UL 224 0 ± 10%
Eccentricity ASTM D 2671 < 40%
Heat Aging
Tensile Strength
Ultimate Elongation
158°C, 168 hrs. > 11 MPa
> 300 %
Flammability VW-1 Pass
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 2671 > 10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
Property of adhesive
Ring-Ball Soft Point ASTM E28 95°C + 5°C
4
laHS camplnn:
www.Qualtekusa.com 32
Q5-4XR
SEMI-RIGID, ADHESIVE LINED HEAT SHRINKABLE TUBING
SHRINK RATIO 4:1 QBK/HBK SERIES
Features/Applications
Specially designed for the protection of wires, terminals and other components
against environmental damage. The semi-rigid composition makes it more abrasion
resistant compared with most common tubing and the 4:1 shrink ratio ts a wide
range of component diameters. With its thicker liner, it forms an eff ective barrier
against fl uids and moisture.
Product Dimensions
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. Halogen free heat-shrinkable adhesive-lined tubing is available upon request.
Operating temperature: -55°C to +125°C
Minimum shrink temperature: 110°C
Full recovery temperature: 135°C
Meets: SAE-AMS-DTL-23053/4, Ford ESB-M99D56-A2, 600V
Standard colors: Black and Clear
RoHS Compliant
HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED
Size
(mm)
As Supplied (mm) After Recovered
(mm)
Standard
Packaging
Inside Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
Adhesive
Thickness
(nom.)
Cut to Length
Pcs.
(QB)*
Qty per bag
6” 48”
6/1.27 6 1.27 1.30 0.56 20 5
8/1.65 8 1.65 1.52 0.76 16 5
12/2.41 12 2.41 1.91 1.02 14 5
18/4.45 18 4.45 2.41 1.37 12 5
Technical Data
14
Property Test Method Test Requirements
Tensile Strength ASTM D 2671 >10 MPa
Elongation at Break ASTM D 2671 >200%
Elongation at Break After Aging (158°C, 168 hrs.) ASTM D 2671 >100%
Longitudinal Shrinkage UL 224 -10~0%
Heat Shock 250°C, 4 hrs. No cracking, no dropping
Cold Bend ( -30°C, 4 hr.) ASTM D 2671 No cracking
Dielectric Strength ASTM D 2671 15kV (min.)
Minimum Volume Resistance ASTM D 2671 >10 .cm
Flammability -Self extinguish in 30 seconds
Copper Corrosion (158°C, 168 hrs.)U L 224 Pass
Property of adhesive
Ring-Ball Soft Point ASTM E 28 135°C ± 5°C
laHS camplnn:
www.Qualtekusa.com
Size As Supplied
(mm)
After Recovered
(mm)
Standard
Packaging
Inch mm
Inside
Diameter
(min.)
Inside
Diameter
(max.)
Total Wall
Thickness
(min.)
Adhesive
Thickness
(nom.)
Cut to Length
Pcs.
*(QB)
Qty per bag
6” 48”
3/4 19/6 19 6 3.0 1.35 14 5
1 25/8 25 8 3.0 1.35 12 5
1 1/4 33/8 33 8 3.0 1.35 5 5
1 1/2 40/12 40 12 3.0 1.35 5 5
2 55/16 55 16 3.0 1.35 3 5
2 1/2 65/19 65 19 3.0 1.35 2 5
3 75/22 75 22 3.0 1.35 2 5
3 3/8 85/25 85 25 3.0 1.35 1 5
4 100/30 100 30 3.0 1.35 1 5
Q5-3XM
HEAVY DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING
SHRINK RATIO 3:1
Features/Applications
Manufactured using a specially designed coating technology. Designed to provide
both insulation and create a tight seal for protected articles. Suitable for joints and
terminations, it can also be used to protect auto wires, shipping cables, bundled wires
and metal tubes against water and moisture especially in ship building.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
4. Halogen free heat-shrinkable adhesive-lined tubing is available upon request.
Operating temperature: -55°C to +125°C
Minimum shrink temperature: 80°C
Full recovery Temperature: 110°C
Standard color: Black
RoHS Compliant
33
HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED
Product Dimensions
Technical Data
14
Property Test Method Typical Data
Tensile Strength ASTM D 2671 >14 MPa
Ultimate Elongation ASTM D 2671 > 400%
Longitudinal Shrinkage UL 224 -10%
Eccentricity ASTM D 2671 < 30%
Heat Aging
Tensile Strength
Ultimate Elongation
250°C, 168 hrs. > 12 MPa
> 350 %
Heat Shock 300°C, 4 hrs. No Cracking
Flammability VW-1 Pass
Dielectric Strength IEC 93 > 20 kV / mm
Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown
Volume Resistance ASTM D 2671 >10 Ω.cm
Copper Stability UL 224 Pass
Copper Corrosion UL 224 No Corrosion
Property of adhesive
Ring-Ball Soft Point ASTM E28 85°C + 5°C
loNS camnlllnr u...
www.Qualtekusa.com 34
Size
(mm)
As Supplied (mm) After Recovered
(mm)
Tubing Shape
Standard
Packaging
Inside Diameter
(min.)
Inside
Diameter
(max.)
Wall
Thickness
(min.)
Cut to
Length Pcs.
*(QB)
Qty per bag
(48” pcs.)
19/3.2 19.0 3.2 3.2 Round 20
33/5.5 33.0 5.5 3.4 Round 20
44.4/7.4 44.4 7.4 3.6 Round 15
50.8/8.3 50.8 8.3 4.3 Round 15
69.8/11.7 69.8 11.7 4.8 Round 15
88.9/17.1 88.9 17.1 4.8 Round 15
119.4/22.9 119.4 22.9 4.8 Round 10
235/40 235.0 40.0 4.8 Round 10
HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED
QRA-6X
VERY HIGH SHRINK RATIO, HEAVY DUAL WALL TUBING ,
HOT MELT ADHESIVE-LINED
SHRINK RATIO 6:1
Features/Applications
Ideal for applications of extremely diff erent diameter between cables, connectors and
components. The high shrink ratio provides close fi t to a wide variety of irregular shapes,
connectors and fi gurations. Provides excellent mechanical protection to cable joints and
terminations, complete environmental protection and is resistant to impact and abrasion.
Product Dimensions
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Cross Reference Guide located on page 3.
3. Special sizes, packaging, colors and cut pieces are available upon request.
Operating temperature: -55°C to +110°C
Minimum shrink temperature: 120°C
Full recovery temperature: 120°C
Standard color: Black
RoHS Compliant
Very high shrink ratio
Resistant to UV radiation
High electrical insulation
Superior mechanical property
Technical Data
14
Property Test Method Typical Data
Tensile Strength ASTM D 2671 >14 MPa
Tensile Strength After Aging (158°C, 168 hrs.) ASTM D 2671 > 12 MPa
Longitudinal Shrinkage UL 224 0 ± 10%
Elongation at Break ASTM D 2671 > 400%
Elongation at Break After Aging (50°C, 168 hrs.) ASTM D 2671 > 300%
Dielectric Strength IEC 243 > 18kV / mm
Volume Resistance IEC 93 >13 .cm
Copper Stability ASTM D 2671 Non-corrosive
Heat Shock (225°C, 4hrs.) ASTM D 2671 No cracking or fl owing
Property Test Method Typical Data
Water Absorption ISO 62 < 0.2%
Softening Point ASTM D E28 85°C ± 5°C
Peel Strength (PE) DIN 30672 4N / cm
Resistance to Fungus and Decay ISO 846 Pass
IaNS camplI-M
www.Qualtekusa.com
35
QBTM, QBTH
HALOGEN FREE, HEAT SHRINKABLE, 24-36kV
BUS BAR INSULATION PROTECTION TUBING
Features/Applications
Made from specially formulated radiation cross-linked halogen-free compounds.
The carefully produced product can provide high resistance to tracking and
arcing. Used to enhance the insulation properties of bus bar in switchgear and
substations. The continuous length of supplied products makes it more convenient
and economical.
Notes:
1. * See page 12 - Part Number Guide for standard packaging codes.
2. Special sizes, packaging, and cut pieces are available upon request.
Operating temperature: -55°C to +105°C
Minimum shrink temperature: 120°C
RoHS Compliant
Halogen free
UV and weather resistant
HEAT SHRINK MEDIUM/HEAVY WALL BUS BAR TUBING
Technical Data
Property Test Method Typical Data
Tensile Strength ASTM D 2671 > 14 MPa
Ultimate Elongation ASTM D 2671 > 800%
Longitudinal Shrinkage ASTM D 2671 0 to -10%
Heat Aging Tensile Strength (120 °C, 168 hrs.)
Ultimate Elongation
ASTM D 2671 > 10MPa
> 200%
Dielectric Strength IEC 243 > 19kV/mm
Dielectric Constant IEC 250 < 3.5
Volume Resistance IEC 93 > 10 14 Ω .cm
Flammability (Oxygen Index) ISO 4589 > 25
Copper Corrosion UL 224 No corrosion
Cold Bend ASTM D 2671 (-40°C, 4 hrs.) No cracking
Water Absorption ISO 62 (23°C, 14 days) < 0.5%
Size
(mm)
As Supplied (mm) After Recovered (mm) Tubing
Shape
Standard Spool
*(SS)
(Meter)
Inside Diameter
(min)
Inside Diameter
(max)
Wall Thickness
(min)
15/6 15 6 2.0 Flat 30
30/12 30 12 2.3 Flat 30
40/16 40 16 2.5 Flat 30
50/20 50 20 2.5 Flat 15
65/25 65 25 2.5 Flat 15
75/30 75 30 2.6 Flat 15
100/40 100 40 2.8 Flat 15
120/50 120 50 2.8 Flat 15
Standard Packaging
*(QB) (mm)
150/60 150 60 3.3 Round 1000
180/60 180 60 3.3 Round 1000
205/75 205 75 3.8 Round 1000
235/75 235 75 3.8 Round 1000
Product Dimensions QBTM-Medium Wall Bus Bar Tubing 24kV
Continuous Length Tubing
Product Dimensions QBTH-Heavy Wall Bus Bar Tubing 36kV
Size
(mm)
As Supplied (mm) After Recovered (mm) Tubing
Shape
Standard Spool
*(SS)
(Meter)
Inside Diameter
(min)
Inside Diameter
(max)
Wall Thickness
(min)
25/10 25 10 4.0 Flat 15
40/16 40 16 4.0 Flat 15
Standard Packaging
*(QB) (mm)
65/25 65 25 4.0 Round 1000
75/25 75 25 4.0 Round 1000
95/30 95 30 4.0 Round 1000
120/40 120 140 4.2 Round 1000
180/58 180 58 4.2 Round 1000
Cut Length Tubing
Cut Length Tubing
RUNS comnllanl Arspiral hot man adhesive
www.Qualtekusa.com
QSEC
HEAT SHRINKABLE CABLE END CAPS, 1000V
WITH SPIRAL ADHESIVE COATING
Features/Applications
QSEC off ers an economical means of sealing the ends of power and control cables
to ensure a watertight seal. The internal surface of the end caps has a layer of
spiral coated hot melt adhesive, which retains its exible properties after recovery.
Recommended for use both in open air and on underground power distribution
cables with PVC, lead or XLPE sheaths. Protects against oxidation, ozone, UV
radiation, etc.
Notes:
1. End cap with valve stem is available upon request.
2. * See page 12 - Part Number Guide for standard packaging codes.
3. Cross Reference Guide located on page 3.
Operating temperature: -55°C to +110°C, 1000V
Minimum shrink temperature: 120°C
RoHS Compliant
Protection against oxidation,
ozone & UV radiation
Easy to fi t on cable end
Ensures seal
A-spiral hot melt adhesive
D
Dw A
L
END CAPS
36
Technical Data
14
Property Test Method Typical Data
Operating Temperature IEC 216 -55°C to +110°C
Tensile Strength ASTM D 638 > 14 MPa
Elongation at Break ASTM D 638 > 400%
Density ASTM D 792 1.05
Elongation at Break After Aging 150°C, 168 hrs. > 300%
Dielectric Strength IEC 243 > 15kV/ mm
Volume Resistance IEC 93 > 10 .cm
Part Number
As Supplied
(mm) Recovered (mm) For Cable
Diameter
(mm)
Standard
Packaging
*(QB)
(Qty)
D (min) D (max) A (+ 10%) L (+ 10%) Dw (+ 5%)
QSEC105-12/4-QB200 12 4 15 40 2.6 4-10 200
QSEC110-14/5-QB200 14 5 18 45 2.2 5-12 200
QSEC115-20/6-QB150 20 6 25 55 2.8 6-16 150
QSEC120-25/8.5-QB150 25 8.5 30 68 2.8 10-20 150
QSEC130-35/16-QB100 35 16 35 83 3.3 17-30 100
QSEC135-40/15-QB100 40 15 40 83 3.3 18-32 100
QSEC140-55/26-QB50 55 26 50 103 3.5 28-48 50
QSEC150-75/36-QB40 75 36 55 120 4.0 45-68 40
QSEC160-100/52-QB30 100 52 70 140 4.0 55-90 30
QSEC170-120/60-QB15 120 60 70 150 4.0 65-110 15
QSEC180-145/60-QB15 145 60 70 150 4.0 70-130 15
QSEC190-160/82-QB10 160 82 70 150 4.0 90-150 10
QSEC200-200/90-QB10 200 90 70 160 4.2 100-180 10
Product Dimensions
Standard Length End Cap
Extended Length End Cap
QSEC110L-14/5-QB200 14 5 30 55 2.2 5-12 200
QSEC130L-42/15-QB100 42 15 40 110 3.3 18-34 100
QSEC140L-55/23-QB50 55 23 70 140 3.8 25-48 50
QSEC145L-62/23-QB50 62 23 70 140 3.8 25-55 50
QSEC150L-75/32-QB40 75 32 70 150 4.0 40-68 40
QSEC150XL-75/36-QB40 75 36 70 170 4.2 45-68 40
QSEC160L-105/45-QB30 105 45 65 150 4.0 50-90 30
)i m I. ,.
www.Qualtekusa.com
P/N Q2-F-QK1-01-6IN-180
Q2-F Kit 1 consists of 180 pcs.
P/N Q2-F-QK4-11-6IN-141
Q2-F Kit 4 consists of 141 pcs.
QKITS, REFILL BAGS, Q BOX & MINI SPOOLS
P/N Q2-F-QK2-01-6IN-82
Q2-F Kit 2 consists of 82 pcs.
SMALL SIZES
Q2-F KIT 1
180 PCS.
LARGE SIZES
Q2-F KIT 2
82 PCS.
ASSORTED COLORS
Q2-F KIT 4
141 PCS.
REFILL BAGS
REFILL BAGS
REFILL BAGS
P/N Q2-F3X-QK1-01-6IN-106
Q2-F3X Kit 1 consists of 106 pcs.
ASSORTED SIZES
Q2-F3X KIT 1
106 PCS.
REFILL BAGS
Q BOX
Q BOX
Q2-F TYPE TUBING KIT, 6” LENGTH PCS.
ASSORTED SIZES / KITS 1 & 2 BLACK, KIT 4 ASSORTED COLORS
THIN WALL, ENVIRONMENT FRIENDLY, HIGHLY FLAME RETARDANT, POLYOLEFIN TUBING
SHRINK RATIO 2:1, OPERATING TEMPERATURE: -55°C to +135°C, MILITARY STANDARD: 23053/5
Q2-F3X TYPE TUBING KIT, 6” LENGTH PCS.
ASSORTED SIZES / BLACK
THIN WALL, HIGHLY FLEXIBLE, FLAME RETARDANT POLYOLEFIN TUBING
SHRINK RATIO 3:1, OPERATING TEMPERATURE: -55°C to +135°C, MILITARY STANDARD: 23053/5
MINI SPOOLS
VARIOUS LENGTHS
PER SIZE
Q2-F, Kit 1 Refi ll Bags
Consist of 6” length pcs.
Q2-F, Kit 2 Refi ll Bags
Consist of 6” length pcs.
Q2-F, Kit 4 Refi ll Bags
Consist of 6” length pcs.
Q2-F3X, Kit 1 Refi ll Bags
Consist of 6” length pcs.
6” LENGTH
6” LENGTH
6” LENGTH
SHRINK TUBE KITS, REFILL BAGS, Q BOX & MINI SPOOLS
37
Part Number QTY Color
Q2-F-RK1-3/64-01-6IN-40 40 pcs. Black
Q2-F-RK1-1/16-01-6IN-36 36 pcs. Black
Q2-F-RK1-3/32-01-6IN-32 32 pcs. Black
Q2-F-RK1-1/8-01-6IN-28 28 pcs. Black
Q2-F-RK1-3/16-01-6IN-24 24 pcs. Black
Q2-F-RK1-1/4-01-6IN-20 20 pcs. Black
Size QTY Color
Inch mm
3/64 1.6 40 pcs. Black
1/16 2.0 36 pcs. Black
3/32 3.1 32 pcs. Black
1/8 3.7 28 pcs. Black
3/16 5.2 24 pcs. Black
1/4 6.8 20 pcs. Black
Part Number Size
(Inch)
Box
Length
(Feet)
Q2-F-3/64-01-QX50FT 3/64 50
Q2-F-1/16-01-QX50FT 1/16 50
Q2-F-3/32-01-QX50FT 3/32 50
Q2-F-1/8-01-QX50FT 1/8 50
Q2-F-3/16-01-QX30FT 3/16 30
Q2-F-1/4-01-QX30FT 1/4 30
Q2-F-5/16-01-QX30FT 5/16 30
Q2-F-3/8-01-QX30FT 3/8 30
Q2-F-1/2-01-QX15FT 1/2 15
Q2-F-5/8-01-QX15FT 5/8 15
Q2-F-3/4-01-QX15FT 3/4 15
Part Number Size
(Inch)
Spool
Length
(Feet)
Q2-F-3/64-01-MS100FT 3/64 100
Q2-F-1/16-01-MS100FT 1/16 100
Q2-F-3/32-01-MS100FT 3/32 100
Q2-F-1/8-01-MS100FT 1/8 100
Q2-F-3/16-01-MS100FT 3/16 100
Q2-F-1/4-01-MS100FT 1/4 100
Q2-F-5/16-01-MS100FT 5/16 100
Q2-F-3/8-01-MS100FT 3/8 100
Q2-F-1/2-01-MS100FT 1/2 100
Q2-F-5/8-01-MS50FT 5/8 50
Q2-F-3/4-01-MS50FT 3/4 50
Q2-F-1-01-MS50FT 1 50
Q2-F-1 1/2-01-MS50FT 1 1/2 50
Q2-F-2-01-MS50FT 2 50
Size QTY Color
Inch mm
5/16 8.8 18 pcs. Black
3/8 10.7 16 pcs. Black
1/2 13.7 14 pcs. Black
5/8 16.7 14 pcs. Black
3/4 20.5 12 pcs. Black
1 25.4 8 pcs. Black
Size QTY Color
Inch mm
1/16 2.0 39 pcs. Assorted
1/8 3.7 31 pcs. Assorted
1/4 6.8 23 pcs. Assorted
3/8 10.7 19 pcs. Assorted
1/2 13.7 19 pcs. Assorted
1 25.4 10 pcs. Assorted
Size QTY Color
Inch mm
1/16 2.0 28 pcs. Black
1/8 3.7 24 pcs. Black
1/4 6.8 20 pcs. Black
1/2 10.7 14 pcs. Black
3/4 13.7 12 pcs. Black
1 25.4 8 pcs. Black
Part Number QTY Color
Q2-F-RK2-5/16-01-6IN-18 18 pcs. Black
Q2-F-RK2-3/8-01-6IN-16 16 pcs. Black
Q2-F-RK2-1/2-01-6IN-14 14 pcs. Black
Q2-F-RK2-5/8-01-6IN-14 14 pcs. Black
Q2-F-RK2-3/4-01-6IN-12 12 pcs. Black
Q2-F-RK2-1-01-6IN-8 8 pcs. Black
Part Number QTY Color
Q2-F-RK4-1/16-11-6IN-39 39 pcs. Assorted
Q2-F-RK4-1/8-11-6IN-31 31 pcs. Assorted
Q2-F-RK4-1/4-11-6IN-23 23 pcs. Assorted
Q2-F-RK4-3/8-11-6IN-19 19 pcs. Assorted
Q2-F-RK4-1/2-11-6IN-19 19 pcs. Assorted
Q2-F-RK4-1-11-6IN-10 10 pcs. Assorted
Part Number QTY Color
Q2-F3X-RK1-1/16-01-6IN-28 28 pcs. Black
Q2-F3X-RK1-1/8-01-6IN-24 24 pcs. Black
Q2-F3X-RK1-1/4-01-6IN-20 20 pcs. Black
Q2-F3X-RK1-1/2-01-6IN-14 14 pcs. Black
Q2-F3X-RK1-3/4-01-6IN-12 12 pcs. Black
Q2-F3X-RK1-1-01-6IN-8 8 pcs. Black
6” LENGTH
www.Qualtekusa.com
P/N Q5-2X-QK1-01-6IN-114
Q5-2X Kit 1 consists of 114 pcs.
QKITS & REFILL BAGS
P/N Q5-3X-QK1-01-6IN-114
Q5-3X Kit 1 consists of 114 pcs.
ASSORTED SIZES
Q5-2X KIT 1
114 PCS.
ASSORTED SIZES
Q5-3X KIT 1
114 PCS.
P/N Q5-F3X-QK1-01-6IN-114
Q5-F3X Kit 1 consists of 114 pcs.
ASSORTED SIZES
Q5-F3X KIT 1
114 PCS.
P/N Q2-Z-QK1-01-6IN-180
Q2-Z Kit 1 consists of 180 pcs.
P/N Q2-Z-QK2-01-6IN-82
Q2-Z Kit 2 consists of 82 pcs.
SMALL SIZES
Q2-Z KIT 1
180 PCS.
LARGE SIZES
Q2-Z KIT 2
82 PCS.
Q2-Z TYPE TUBING KIT, 6” LENGTH PCS.
ASSORTED SIZES / BLACK
THIN WALL, GENERAL PURPOSE, FLAME RETARDANT, POLYOLEFIN TUBING
SHRINK RATIO 2:1, OPERATING TEMPERATURE: -55°C to +125°C
Q5-2X TYPE TUBING KIT, 6” LENGTH PCS.
ASSORTED SIZES / BLACK
DUAL WALL, ADHESIVE-LINED, FLEXIBLE POLYOLEFIN TUBING
SHRINK RATIO 2:1, OPERATING TEMPERATURE: -55°C to +125°C, MILITARY STANDARD: 23053/4
Q5-3X TYPE TUBING KIT, 6” LENGTH PCS.
ASSORTED SIZES / BLACK
DUAL WALL, ADHESIVE-LINED, FLEXIBLE POLYOLEFIN TUBING
SHRINK RATIO 3:1, OPERATING TEMPERATURE: -55°C to +125°C, MILITARY STANDARD: 23053/4
Q5-F3X TYPE TUBING KIT, 6” LENGTH PCS.
ASSORTED SIZES / BLACK
DUAL WALL, ADHESIVE-LINED, FLEXIBLE POLYOLEFIN TUBING
SHRINK RATIO 3:1, OPERATING TEMPERATURE: -55°C to +125°C, MILITARY STANDARD: 23053/4
REFILL BAGS
6” LENGTH
REFILL BAGS
6” LENGTH
REFILL BAGS
6” LENGTH
REFILL BAGS
6” LENGTH
REFILL BAGS
6” LENGTH
Q2-Z, Kit 1 Refi ll Bags
Consist of 6” length pcs.
Q2-Z, Kit 2 Refi ll Bags
Consist of 6” length pcs.
Q5-2X, Kit 1 Refi ll Bags
Consist of 6” length pcs.
Q5-3X, Kit 1 Refi ll Bags
Consist of 6” length pcs.
Q5-F3X, Kit 1 Refi ll Bags
Consist of 6” length pcs.
38
SHRINK TUBE KITS, REFILL BAGS, Q BOX & MINI SPOOLS
Size QTY Color
Inch mm
3/64 1.6 40 pcs. Black
1/16 2.0 36 pcs. Black
3/32 3.1 32 pcs. Black
1/8 3.7 28 pcs. Black
3/16 5.2 24 pcs. Black
1/4 6.8 20 pcs. Black
Size QTY Color
Inch mm
5/16 8.8 18 pcs. Black
3/8 10.7 16 pcs. Black
1/2 13.7 14 pcs. Black
5/8 16.7 14 pcs. Black
3/4 20.5 12 pcs. Black
1 25.4 8 pcs. Black
Size QTY Color
Inch mm
1/8 3.7 28 pcs. Black
3/16 5.2 24 pcs. Black
1/4 6.8 20 pcs. Black
3/8 10.7 16 pcs. Black
1/2 13.7 14 pcs. Black
3/4 20.5 12 pcs. Black
Size QTY Color
Inch mm
1/8 3.7 28 pcs. Black
3/16 5.2 24 pcs. Black
1/4 6.8 20 pcs. Black
3/8 10.7 16 pcs. Black
1/2 13.7 14 pcs. Black
3/4 20.5 12 pcs. Black
Size QTY Color
Inch mm
1/8 3.7 28 pcs. Black
3/16 5.2 24 pcs. Black
1/4 6.8 20 pcs. Black
3/8 10.7 16 pcs. Black
1/2 13.7 14 pcs. Black
3/4 20.5 12 pcs. Black
Part Number QTY Color
Q2-Z-RK1-3/64-01-6IN-40 40 pcs. Black
Q2-Z-RK1-1/16-01-6IN-36 36 pcs. Black
Q2-Z-RK1-3/32-01-6IN-32 32 pcs. Black
Q2-Z-RK1-1/8-01-6IN-28 28 pcs. Black
Q2-Z-RK1-3/16-01-6IN-24 24 pcs. Black
Q2-Z-RK1-1/4-01-6IN-20 20 pcs. Black
Part Number QTY Color
Q2-Z-RK2-5/16-01-6IN-18 18 pcs. Black
Q2-Z-RK2-3/8-01-6IN-16 16 pcs. Black
Q2-Z-RK2-1/2-01-6IN-14 14 pcs. Black
Q2-Z-RK2-5/8-01-6IN-14 14 pcs. Black
Q2-Z-RK2-3/4-01-6IN-12 12 pcs. Black
Q2-Z-RK2-1-01-6IN-8 8 pcs. Black
Part Number QTY Color
Q5-2X-RK1-1/8-01-6IN-28 28 pcs. Black
Q5-2X-RK1-3/16-01-6IN-24 24 pcs. Black
Q5-2X-RK1-1/4-01-6IN-20 20 pcs. Black
Q5-2X-RK1-3/8-01-6IN-16 16 pcs. Black
Q5-2X-RK1-1/2-01-6IN-14 14 pcs. Black
Q5-2X-RK1-3/4-01-6IN-12 12 pcs. Black
Part Number QTY Color
Q5-3X-RK1-1/8-01-6IN-28 28 pcs. Black
Q5-3X-RK1-3/16-01-6IN-24 24 pcs. Black
Q5-3X-RK1-1/4-01-6IN-20 20 pcs. Black
Q5-3X-RK1-3/8-01-6IN-16 16 pcs. Black
Q5-3X-RK1-1/2-01-6IN-14 14 pcs. Black
Q5-3X-RK1-3/4-01-6IN-12 12 pcs. Black
Part Number QTY Color
Q5-F3X-RK1-1/8-01-6IN-28 28 pcs. Black
Q5-F3X-RK1-3/16-01-6IN-24 24 pcs. Black
Q5-F3X-RK1-1/4-01-6IN-20 20 pcs. Black
Q5-F3X-RK1-3/8-01-6IN-16 16 pcs. Black
Q5-F3X-RK1-1/2-01-6IN-14 14 pcs. Black
Q5-F3X-RK1-3/4-01-6IN-12 12 pcs. Black
l I CABLE TIES Qualtek offers a complete line of cable ties and accessories which include: Miniature, intermediate] standard, and heavy duty cable ties Releasable Stainless Steel Screw and push mount Marker ties Double loop Beaded Cable tie mounts
39
MARKER CABLE TIES
Part Number Width
mm [Inch]
Length
mm [Inch]
Max Bundle
Diameter
mm [Inch]
Min Loop Tensile
Kg [lb]
Write Area
mm [Inch]
M - 18lb TYPE A
11-M100 2.5 [.098] 100 [4.0] 22.0 [0.86] 8 [18] 7.75x24.5 [0.30x0.95]
11-M200 2.5 [.098] 200 [8.0] 53.9 [2.12] 8 [18] 7.75x24.5 [0.30x0.95]
M - 18lb TYPE C
11-M110 2.5 [.098] 110 [4.3] 22.6 [0.89] 8 [18] 9.0x20 [0.35x0.78]
S - 50lb TYPE B
11-S190 4.8 [.189] 190 [7.0] 50.9 [2.00] 22 [50] 12.9x27 [0.50x1.05]
11 Series
NYLON 6.6
GENERAL PURPOSE
APPLICATION OPERATING TEMPERATURE: -40ºC to +85ºC
APPROVALS1 :
11 M 200 B C
SERIES
CROSS SECTION
LENGTH
MATERIAL/COLOR
PACKAGE SIZE
N: Natural
B: Normal UV Black
C: 100PCS
Number: Other Quantity
LENGTH
WIDTH
LENGTH
WIDTH WIDTH
LENGTH
PART NUMBER SYSTEM
TYPE A TYPE B TYPE C
www.Qualtekusa.com 40
Note:
1. 11-M110 and 11-M200 are not UL approved
Cross Reference Guide located on pages 4-8.
RnHS Complun: PACKAGE SI MIN
www.Qualtekusa.com
41
12 Series
NYLON 6.6
GENERAL PURPOSE
MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC
APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC
Part Number Width
mm [Inch]
Length
mm [Inch]
Max Bundle
Diameter
mm [Inch]
Min Loop Tensile
Kg [lb]
S - 50lb
12-S200 4.8 [.189] 200 [7.9] 57.1 [2.15] 22 [50]
12-S300 4.8 [.189] 300 [11.8] 85.3 [3.36] 22 [50]
12 S 200 B C
PART NUMBER SYSTEM
SERIES
CROSS SECTION
LENGTH
MATERIAL/COLOR
PACKAGE SIZE
N: Natural
B: Normal UV Black
C: 100PCS
Number: Other Quantity
LENGTH
WIDTH
DOUBLE LOOP CABLE TIES
Note: Cross Reference Guide located on pages 4-8.
KnHS Compum 1.5ng PACKAGE SI
BEADED CABLE TIES
13 Series
13 200 B C
SERIES
LENGTH
MATERIAL/COLOR
PACKAGE SIZE
N: Natural
B: Normal UV Black
C: 100PCS
Number: Other Quantity
PART NUMBER SYSTEM
www.Qualtekusa.com 42
NYLON 6.6
GENERAL PURPOSE
MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC
APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC
Part Number Ball Diameter
mm [Inch]
Length
mm [Inch]
Max Bundle
Diameter
mm [Inch]
HEAD TYPE A
13-100 2.5 [.095] 100 [4.0] 25.0 [0.98]
HEAD TYPE B
13-150 2.5 [.095] 150 [6.0] 36.0 [1.41]
13-200 2.5 [.095] 200 [8.0] 51.9 [2.04]
HEAD TYPE A HEAD TYPE B
BALL
DIAMETER
LENGTH
BALL
DIAMETER
LENGTH
Note: Cross Reference Guide located on pages 4-8.
PACKAGE SI
www.Qualtekusa.com
43
DOUBLE LOOP BEADED CABLE TIES
14 Series
NYLON 6.6
GENERAL PURPOSE
MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC
APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC
Part Number Ball Diameter
mm [Inch]
Length
mm [Inch]
Max Bundle
Diameter
mm [Inch]
Min Loop Tensile
Kg [lb]
S - 50lb
14-S210 4.5 [.177] 210 [8.0] 53.5 [2.10] 22 [50]
14-S310 4.5 [.177] 310 [12.0] 83.8 [3.30] 22 [50]
HD - 120lb
14-HD460 6.5 [.255] 460 [18.0] 129.5 [5.10] 55 [120]
14-HD610 6.5 [.255] 610 [24.0] 175.2 [6.90] 55 [120]
14 S 210 B C
PART NUMBER SYSTEM
SERIES
CROSS SECTION
LENGTH
MATERIAL/COLOR
PACKAGE SIZE
N: Natural
B: Normal UV Black
C: 100PCS
Number: Other Quantity
BALL DIAMETER
LENGTH
Note: Cross Reference Guide located on pages 4-8.
PACKAGE SI
CABLE TIES RUBBER ADHESIVE MOUNTING BASE
15 Series
15 1919 B C
SERIES
SIZE
MATERIAL/COLOR
PACKAGE SIZE
N: Natural
B: Normal UV Black
C: 100PCS
Number: Other Quantity
PART NUMBER SYSTEM
www.Qualtekusa.com 44
NYLON 6.6
GENERAL PURPOSE
APPLICATION OPERATING TEMPERATURE: -40ºC to +85ºC
APPROVALS1 :
LENGTH
WIDTH
SCREW SIZE
Part Number Length
mm [Inch]
Width
mm [Inch] Screw Size
Cable Ties
Width up to
mm [Inch]
15-1919 19.0 [.750] 19.0 [.750] M5 [#10] 3.6 [.140]
15-2525 28.0 [1.10] 28.0 [1.10] M5 [#10] 4.8 [.189]
15-4040 40.0 [1.50] 40.0 [1.50] M5 [#10] 9.0 [.354]
Note:
1. 15-4040 is not UL approved
Cross Reference Guide located on pages 4-8.
nuns Comnlllnl LENGTH PACKAGE SIZ
www.Qualtekusa.com
45
CABLE TIES SCREW MOUNT BASE
16 Series
NYLON 6.6
GENERAL PURPOSE
APPLICATION OPERATING TEMPERATURE: -40ºC to +85ºC
Part Number Length
mm [Inch]
Width
mm [Inch]
Height
mm [Inch]
Diameter
mm [Inch]
Cable Ties
Width up to
mm [Inch]
16-1509 15.2 [.600] 9.4 [.370] 6.80 [.267] 3.30 [.130] 4.8 [.189]
16-1712 17.8 [.700] 12.7 [.500] 8.20 [.320] 4.31 [.170] 4.8 [.189]
16-2216 22.0 [.870] 16.2 [.640] 9.60 [.385] 5.20 [.205] 7.6 [.300]
16-2516 25.4 [1.00] 16.2 [.640] 10.80 [.425] 5.20 [.205] 9.0 [.354]
16 1509 B C
SERIES
SIZE
MATERIAL/COLOR
PACKAGE SIZE
N: Natural
B: Normal UV Black
C: 100PCS
Number: Other Quantity
PART NUMBER SYSTEM LENGTH
DIAMETER
WIDTH
HEIGHT
Note: Cross Reference Guide located on pages 4-8.
RnHS Complunx URPOSE PERATING OPERA
STANDARD NYLON CABLE TIES
17 Series
www.Qualtekusa.com 46
NYLON 6.6
GENERAL PURPOSE
MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC
APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC
APPROVALS1 :
Part Number Width
mm [Inch]
Length
mm [Inch]
Max Bundle
Diameter
mm [Inch]
Min Loop Tensile
Kg [lb]
M - 18lb
17-M80 2.5 [.098] 80 [3.2] 14.0 [0.55] 8 [18]
17-M100 2.5 [.098] 100 [4.0] 20.5 [0.80] 8 [18]
17-M120 2.5 [.098] 120 [4.7] 27.0 [1.06] 8 [18]
17-M130 2.5 [.098] 130 [5.0] 30.0 [1.18] 8 [18]
17-M150 2.5 [.098] 150 [6.0] 36.5 [1.43] 8 [18]
17-M160 2.5 [.098] 160 [6.3] 39.8 [1.56] 8 [18]
17-M200 2.5 [.098] 200 [8.0] 52.5 [2.06] 8 [18]
17-M260 2.5 [.098] 260 [10.2] 71.6 [2.81] 8 [18]
I - 40lb
17-I140 3.6 [.14] 140 [5.5] 33.0 [1.30] 18 [40]
17-I150 3.6 [.14] 150 [6.0] 36.0 [1.41] 18 [40]
17-I180 3.6 [.14] 180 [7.0] 46.0 [1.81] 18 [40]
17-I200 3.6 [.14] 200 [8.0] 52.5 [2.06] 18 [40]
17-I250 3.6 [.14] 250 [10.0] 68.0 [2.67] 18 [40]
17-I280 3.6 [.14] 280 [11.0] 78.0 [3.07] 18 [40]
17-I300 3.6 [.14] 300 [11.8] 84.0 [3.30] 18 [40]
17-I370 3.6 [.14] 370 [14.5] 106.0 [4.17] 18 [40]
S - 50lb
17-S120 4.6 [.181] 120 [4.7] 23.8 [0.93] 22 [50]
17-S160 4.6 [.181] 160 [6.3] 36.6 [1.32] 22 [50]
17-S180 4.8 [.189] 180 [7.0] 43.0 [1.68] 22 [50]
17-S190 4.8 [.189] 190 [7.5] 46.0 [1.81] 22 [50]
17-S200 4.8 [.189] 200 [8.0] 49.5 [1.94] 22 [50]
17-S250 4.8 [.189] 250 [10.0] 65.0 [2.55] 22 [50]
17-S280 4.8 [.189] 280 [11.0] 74.8 [2.94] 22 [50]
17-S300 4.8 [.189] 300 [11.8] 81.0 [3.18] 22 [50]
17-S350 4.8 [.189] 350 [13.7] 97.0 [3.81] 22 [50]
17-S360 4.8 [.189] 360 [14.0] 100.0 [3.93] 22 [50]
17-S370 4.8 [.189] 370 [14.5] 103.5 [4.07] 22 [50]
17-S380 4.8 [.189] 380 [15.0] 106.7 [4.20] 22 [50]
17-S390 4.8 [.189] 390 [15.3] 110.0 [4.33] 22 [50]
17-S400 4.8 [.189] 400 [15.7] 113.1 [4.45] 22 [50]
17-S430 4.8 [.189] 430 [17.0] 122.5 [4.82] 22 [50]
17-S450 4.8 [.189] 450 [17.7] 129.0 [5.07] 22 [50]
17-S500 4.8 [.189] 500 [19.7] 145.0 [5.70] 22 [50]
17-S550 4.8 [.189] 550 [21.6] 160.9 [6.33] 22 [50]
HD - 120lb
17-HD150 7.6 [.300] 150 [6.0] 35.0 [1.37] 55 [120]
17-HD200 7.6 [.300] 200 [8.0] 50.9 [2.00] 55 [120]
17-HD220 7.6 [.300] 220 [8.6] 57.2 [2.25] 55 [120]
17-HD250 7.6 [.300] 250 [10.0] 66.8 [2.62] 55 [120]
17-HD300 7.6 [.300] 300 [11.8] 82.8 [3.25] 55 [120]
17-HD350 7.6 [.300] 350 [13.7] 98.5 [3.87] 55 [120]
17-HD365 7.6 [.300] 365 [14.0] 103.5 [4.07] 55 [120]
17-HD380 7.6 [.300] 380 [15.0] 108.0 [4.25] 55 [120]
17-HD400 7.6 [.300] 400 [15.7] 114.5 [4.50] 55 [120]
17-HD450 7.6 [.300] 450 [17.0] 130.5 [5.13] 55 [120]
17-HD540 7.6 [.300] 540 [21.0] 159.0 [6.25] 55 [120]
17-HD550 7.6 [.300] 550 [21.6] 162.5 [6.39] 55 [120]
17-HD750 7.6 [.300] 750 [29.5] 226.1 [8.90] 55 [120]
LENGTH
WIDTH
Continued on next page
Note:
1. 17-EHD750, 17-M260HSN, 17-M260HSB, 17-S550HSN, 17-S550HSB, 17-HD750HSN, 17-HD750HSB,
17-M260HT, 17-S550HT, 17-HD750HT, 17-EHD400HT, 17-EHD450HT, 17-EHD500HT, 17-EHD550HT,
17-EHD610HT, 17-EHD760HT, 17-EHD780HT, 17-EHD810HT, 17-EHD920HT, 17-EHD1220HT, 17-EHD750UVB,
are not UL approved
Material/Color LT and V0 are not UL approved
Cross Reference Guide located on pages 4-8.
KnHS Complunx 6 PU RPOSE OPERATING NOPRA :: u PACKAGE SIZ 4 Number. other Quamy
www.Qualtekusa.com
47
STANDARD NYLON CABLE TIES
17 Series
NYLON 6.6
GENERAL PURPOSE
MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC
APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC
APPROVALS1 :
17 EHD 610 B M
PART NUMBER SYSTEM
SERIES
CROSS SECTION
LENGTH
MATERIAL/COLOR
PACKAGE SIZE
N: Natural
WH: White
L: 50PCS
C: 100PCS
Part Number Width
mm [Inch]
Length
mm [Inch]
Max Bundle
Diameter
mm [Inch]
Min Loop Tensile
Kg [lb]
EHD - 175lb
17-EHD400 8.8 [.345] 400 [15.7] 115.0 [4.52] 80 [175]
17-EHD450 8.8 [.345] 450 [18.0] 130.5 [5.13] 80 [175]
17-EHD500 8.8 [.345] 500 [19.7] 146.5 [5.76] 80 [175]
17-EHD550 8.8 [.345] 550 [21.6] 163.5 [6.43] 80 [175]
17-EHD610 8.8 [.345] 610 [24.0] 181.5 [7.14] 80 [175]
17-EHD750 8.8 [.345] 750 [29.5] 226.5 [8.91] 80 [175]
17-EHD760 8.8 [.345] 760 [30.0] 229.5 [9.03] 80 [175]
17-EHD780 8.8 [.345] 780 [30.5] 235.5 [9.27] 80 [175]
17-EHD810 9.0 [.350] 810 [32.0] 245.0 [9.64] 80 [175]
17-EHD920 9.0 [.350] 920 [36.0] 280.0 [11.0] 80 [175]
17-EHD1220 9.0 [.350] 1220 [48.0] 375.5 [14.7] 80 [175]
HSD - 250lb
17-HSD530 12.4 [.490] 530 [21.0] 156.0 [5.90] 110 [250]
17-HSD650 12.4 [.490] 650 [25.5] 195.0 [7.60] 110 [250]
17-HSD1000 12.4 [.490] 1000 [40.0] 305.0 [12.0] 110 [250]
17-HSD1030 12.4 [.490] 1030 [40.5] 315.0 [12.4] 110 [250]
LENGTH
WIDTH
B: Normal UV Black
UVB: Weather Resistant Black
HSB: Heat Stabilized Black
HSN: Heat Stabilized Natural
HT: High Heat Resistant Natural
LT: Low Temperature Resistant Natural
V0: Flame Retardant Natural
G: Green
BL: Blue
Y: Yellow
R: Red
P: Purple
BR: Brown
GR: Gray
O: Orange
FG: Fluorescent Green
FY: Fluorescent Yellow
FB: Fluorescent Blue
FO: Fluorescent Orange
S: Silver
D: 500PCS
Number: Other Quantity
M: 1000PCS
Note: Cross Reference Guide located on pages 4-8.
1. 17-EHD750, 17-M260HSN, 17-M260HSB, 17-S550HSN, 17-S550HSB, 17-HD750HSN, 17-HD750HSB,
17-M260HT, 17-S550HT, 17-HD750HT, 17-EHD400HT, 17-EHD450HT, 17-EHD500HT, 17-EHD550HT,
17-EHD610HT, 17-EHD760HT, 17-EHD780HT, 17-EHD810HT, 17-EHD920HT, 17-EHD1220HT, 17-EHD750UVB,
are not UL approved
Material/Color LT and V0 are not UL approved
Cross Reference Guide located on pages 4-8.
U RPOSE PERATING OP RA .69.. KnHS Complllnx PACKAGE SI LENGTH
MOUNTING HOLE CABLE TIES
www.Qualtekusa.com 48
18 Series
NYLON 6.6
GENERAL PURPOSE
MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC
APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC
APPROVALS1 :
Part Number Width
mm [Inch]
Length
mm [Inch]
Max Bundle
Diameter
mm [Inch]
Min Loop Tensile
Kg [lb] Fastener
M - 18lb
18-M110 2.5 [.098] 110 [4.3] 19.0 [0.75] 8 [18] M2.5 [#4]
I - 40lb
18-I150 3.6 [.14] 150 [6.0] 35.5 [1.40] 18 [40] M4 [#8]
S - 50lb
18-S160 4.8 [.189] 160 [6.3] 36.8 [1.45] 22 [50] M5 [#10]
18-S200 4.8 [.189] 200 [8.0] 49.8 [1.96] 22 [50] M5 [#10]
18-S305 4.8 [.189] 305 [12.0] 82.8 [3.26] 22 [50] M5 [#10]
18-S370 4.8 [.189] 370 [14.5] 103.8 [4.09] 22 [50] M5 [#10]
HD - 120lb
18-HD305 7.6 [.300] 305 [12.0] 78.7 [3.10] 55 [120] M6 [#1/4]
18-HD400 7.6 [.300] 400 [15.7] 109.2 [4.30] 55 [120] M6 [#1/4]
LENGTH
WIDTH
FASTENER
18 HD 400 B C
PART NUMBER SYSTEM
SERIES
CROSS SECTION
LENGTH
MATERIAL/COLOR
PACKAGE SIZE
N: Natural
B: Normal UV Black
C: 100PCS
Number: Other Quantity
Note:
1. 18-M110, is not UL approved
Cross Reference Guide located on pages 4-8.
PACKAGE SIZ
www.Qualtekusa.com
49
RELEASABLE PAWL TYPE CABLE TIES
19 Series
NYLON 6.6
GENERAL PURPOSE
MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC
APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC
19 S 200 B C
PART NUMBER SYSTEM
SERIES
CROSS SECTION
LENGTH
MATERIAL/COLOR
PACKAGE SIZE
N: Natural
B: Normal UV Black
C: 100PCS
Number: Other Quantity
Part Number Width
mm [Inch]
Length
mm [Inch]
Max Bundle
Diameter
mm [Inch]
Min Loop Tensile
Kg [lb]
I - 40lb
19-I100 3.6 [.14] 100 [4.0] 22.6 [0.89] 18 [40]
S - 50lb
19-S160 4.8 [.189] 160 [6.3] 41.9 [1.65] 22 [50]
19-S200 4.8 [.189] 200 [8.0] 54.8 [2.16] 22 [50]
19-S305 4.8 [.189] 305 [12.0] 88.1 [3.47] 22 [50]
19-S380 4.8 [.189] 380 [15.0] 111.0 [4.39] 22 [50]
LENGTH
WIDTH
Note: Cross Reference Guide located on pages 4-8.
KnHS Complunx 6 PURPOSE OPERATIN N OPER .®. PACKAGE SI (
RELEASABLE TRIGGER TYPE CABLE TIES
www.Qualtekusa.com 50
20 Series
NYLON 6.6
GENERAL PURPOSE
MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC
APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC
APPROVALS:
20 S 200 B C
PART NUMBER SYSTEM
SERIES
CROSS SECTION
LENGTH
MATERIAL/COLOR
PACKAGE SIZE
N: Natural
B: Normal UV Black
C: 100PCS
Number: Other Quantity
Part Number Width
mm [Inch]
Length
mm [Inch]
Max Bundle
Diameter
mm [Inch]
Min Loop Tensile
Kg [lb]
S - 50lb
20-S150 7.6 [.300] 150 [6.0] 40.3 [1.59] 22 [50]
20-S200 7.6 [.300] 200 [8.0] 55.6 [2.19] 22 [50]
20-S250 7.6 [.300] 250 [10.0] 71.8 [2.83] 22 [50]
20-S300 7.6 [.300] 300 [11.8] 88.1 [3.47] 22 [50]
20-S370 7.6 [.300] 370 [14.5] 109.9 [4.33] 22 [50]
LENGTH
WIDTH
Note: Cross Reference Guide located on pages 4-8.
RnHS nnnnnnnnn URPOSE PERATING OPERA - .®. PACKAGE SIZ
www.Qualtekusa.com
51
PUSH MOUNT CABLE TIES
21 Series
NYLON 6.6
GENERAL PURPOSE
MATERIAL OPERATING TEMPERATURE: -40ºC to +85ºC
APPLICATION OPERATING TEMPERATURE: -10ºC to +85ºC
APPROVALS1 :
S 200 B C
PART NUMBER SYSTEM
SERIES
CROSS SECTION
LENGTH
MATERIAL/COLOR
PACKAGE SIZE
N: Natural
B: Normal UV Black
C: 100PCS
Number: Other Quantity
Part Number Width
mm [Inch]
Length
mm [Inch]
Max Bundle
Diameter
mm [Inch]
Min Loop Tensile
Kg [lb]
M - 18lb
21A-M100 2.5 [.098] 100 [4.0] 21.6 [0.85] 8 [18]
I - 40lb
21B-I155 3.6 [.140] 155 [6.0] 37.9 [1.49] 18 [40]
S - 50lb
21A-S100 4.8 [.189] 100 [4.0] 21.6 [0.85] 22 [50]
21A-S130 4.8 [.189] 130 [5.1] 30.7 [1.21] 22 [50]
21A-S200 4.8 [.189] 200 [8.0] 50.0 [1.97] 22 [50]
21B-S200 4.8 [.189] 200 [8.0] 50.8 [2.00] 22 [50]
LENGTH
WIDTH
D1
W1
W2
LENGTH
D1
W1
WIDTH
21A SERIES
21B SERIES
Part Number
W1
mm [Inch]
W2
mm [Inch]
D1
mm [Inch]
21A-M100 5.58 [.220] 18.4 [.725] 3.55 [.140]
21A-S100 8.38 [.330] 18.9 [.745] 4.60 [.181]
21A-S130 8.38 [.330] 18.9 [.745] 4.60 [.181]
21A-S200 7.62 [.300] 17.1 [.675] 4.60 [.181]
Part Number
W1
mm [Inch]
D1
mm [Inch]
21B-I155 5.97 [.235] 3.55 [.140]
21B-S200 7.60 [.300] 4.44 [.175]
21A
Note:
1. 21B-I155 is not UL approved
Cross Reference Guide located on pages 4-8.
ESS STEE ESS STEE TEMPER nuns Comnlllnl SERIES 7 j CROSS S LENGTH MATERIAL/COLOR PACKAGE SI 3)
STAINLESS STEEL CABLE TIES
www.Qualtekusa.com 52
22 Series
SELF-LOCKING BALL LOCK HEAD DESIGN
PROVIDES A STRONG, DURABLE METHOD OF CABLE BUNDLING
CAN BE USED IN A WIDE RANGE OF INDOOR, OUTDOOR
AND UNDERGROUND APPLICATIONS
304 STAINLESS STEEL FOR GENERAL PURPOSE APPLICATIONS
316 STAINLESS STEEL FOR CORROSIVE ENVIRONMENTS
OPERATING TEMPERATURE: -80ºC to +538ºC
APPROVALS1 :
22 EH 680 A C
PART NUMBER SYSTEM
SERIES
CROSS SECTION
LENGTH
MATERIAL/COLOR
PACKAGE SIZE
A: 304 Stainless Steel
B: 316 Stainless Steel
C: 100PCS
Number: Other Quantity
Part Number Width
mm [Inch]
Length
mm [Inch]
Max Bundle
Diameter
mm [Inch]
Min Loop Tensile
Kg [lb]
S - 200lb
22-S125 4.6 [.180] 125 [5.0] 38.0 [1.49] 90 [200]
22-S150 4.6 [.180] 150 [6.0] 46.0 [1.81] 90 [200]
22-S200 4.6 [.180] 200 [8.0] 61.9 [2.43] 90 [200]
22-S260 4.6 [.180] 260 [10.0] 81.0 [3.19] 90 [200]
22-S290 4.6 [.180] 290 [11.5] 90.6 [3.56] 90 [200]
22-S360 4.6 [.180] 360 [14.0] 112.8 [4.44] 90 [200]
22-S520 4.6 [.180] 520 [20.5] 163.8 [6.45] 90 [200]
22-S680 4.6 [.180] 680 [27.0] 214.8 [8.45] 90 [200]
22-S840 4.6 [.180] 840 [33.0] 265.7 [10.46] 90 [200]
H - 350lb
22-H200 7.9 [.310] 200 [8.0] 61.9 [2.43] 160 [350]
22-H260 7.9 [.310] 260 [10.0] 81.0 [3.19] 160 [350]
22-H290 7.9 [.310] 290 [11.5] 90.6 [3.56] 160 [350]
22-H360 7.9 [.310] 360 [14.0] 112.8 [4.44] 160 [350]
22-H520 7.9 [.310] 520 [20.5] 163.8 [6.45] 160 [350]
22-H680 7.9 [.310] 680 [27.0] 214.8 [8.45] 160 [350]
22-H840 7.9 [.310] 840 [33.0] 265.7 [10.46] 160 [350]
EH - 500lb
22-EH290 12 [.485] 290 [11.5] 90.6 [3.56] 235 [500]
22-EH360 12 [.485] 360 [14.0] 112.8 [4.44] 235 [500]
22-EH520 12 [.485] 520 [20.5] 163.8 [6.45] 235 [500]
22-EH680 12 [.485] 680 [27.0] 214.8 [8.45] 235 [500]
22-EH840 12 [.485] 840 [33.0] 265.7 [10.46] 235 [500]
C: 304 Epoxy Coated Stainless Steel
D: 316 Epoxy Coated Stainless Steel
WIDTH
LENGTH
Note:
1. 22-H260, 22-EH290C, 22-EH360C, 22-EH520C, 22-EH680C, 22-EH840C, 22-EH290D, 22-EH360D,
22-EH520D, 22-EH680D, 22-EH840D are not UL approved
Cross Reference Guide located on pages 4-8.
PRODUCT PROFILE FAN S DIVISION @ A a 53 d esso es ' ‘ palented noise reduction whranon sleeves P PC AC Receptacles W W N C I Cable Assemblies I P S uualtekElectronics Corporation
HST-0600
7610 Jenther Dr. * Mentor, Ohio 44060 * USA
Telephone: 1.440.951.3300 * Fax: 1.440.951.7252
E-mail: mailbox@qualtekusa.com
Web: www.Qualtekusa.com
P P
PP C D
AC Receptacles
A complete line of inlets, outlets, mul func on modules with major interna onal approval marks thus assuring high safety standards and help customers comply with
interna onal regula ons. Modern produc on methods enable us to manufacture cost-eff ec ve and reliable components. A full range of products are maintained in
inventory for quick on- me deliveries. Custom designs are available upon request.
Circuit Breakers
QLB and QMB series are compact and cost eff ec ve thermal circuit breakers with a wide range of amp ra ngs from 3A - 40A and off ered in single pole and push-to-reset
with safety agency cer ca ons. We off er a large variety of bushing types, terminals, name plates, bu on colors and prin ng with custom confi gura ons available.
EMI Filters
EMI/RFI power line lters are designed to meet most interna onal safety agency requirements. These fi lters help customers meet FCC and VDE emission standards.
Our line consists of many standard confi gura ons such as block type, lter with power line connector, and various lters with mul func onal modules. Custom designs
are available upon request.
Power Cords
A large selection of North American and International Power Cords that have been designed to comply with North American and international safety agency
regulations to insure safe and reliable products. Offered in a wide selection of plugs and connectors available in various cable insulations, voltage ratings,
colors, lengths, shielding and a full range of hospital grade certified power cords. Custom configurations and strain reliefs are available upon request.
Power Supplies
A full range of low cost, high reliability and energy saving switch mode AC/DC power supplies consis ng of enclosed, open frame, din rail, wall mount, desktop,
medical approved, and waterproof LED drivers; our enclosed versions are rated from 15W - 800W, open frame from 20W - 200W, desktop and wall mount from
5W - 200W, and LED drivers with constant current 25W - 200W and constant voltage 25W - 300W. All models have universal voltage input and a variety of output
voltages ranging from 3.3V - 48V and some models include power factor correc on to increase effi ciency and reduce power losses. All of our power supplies meet
or exceed the RoHS EU and the Chinese direc ves and are cer ed with worldwide safety agencies to ensure a safe and reliable product.
F-S D
AC & DC Fans and Accessories
Low cost, high tech AC & DC axial fans with sizes ranging from 25mm - 280 mm, DC voltages from 3.3VDC - 60VDC and AC voltages from 115VAC - 230VAC and many
special features such as IP55, IP56M, and IP67 rated, GR487 salt fog rated, speed sensors, alarm func ons and much more upon request. Each fan is off ered with a
variety of bearing types : 2-ball, 1-ball 1-sleeve, sleeve only, and our newly developed hydro dynamic bearing with be er performance than sleeve and lower cost
than 2 ball bearings. Every fan is available with a wide range of speeds from ultra low to super high speed.
Our fan accessories are famous worldwide and consist of wire form and plas c guards, plas c air fi lters, aluminum and stainless steel air fi lters, fan cords, and our
patented noise reduc on vibra on sleeves.
I P S D
Procurement Services
With over 30 years of global business experience, Qualtek’s IPS division provides a complete range of services from component sourcing to complete turnkey projects.
With our extensive knowledge of the major global manufacturing regions, this enables us to have access to the newest technology, highest quality, and the most cost
eff ec ve produc on methods.
W M, C AI D
Cable Assemblies
We o er a wide selec on of standard and custom cable assemblies, specializing in DVI, HDMI, USB and Fiber Op c and also producing fl at ribbon cables, monitor cables,
networking cables and an extensive off ering of custom cable assemblies and wire harnesses.
Cable Ties & Accessories
Our low cost, high reliability cable nylon es are available in a variety of styles including miniature, intermediate, standard and heavy duty. Specialty cable es include
releasable pawl type, stainless steel ball lock, head mount, push mount, marker  es, double loop, beaded and 4-way cable  e mounts. Cable es are available in various
material types including ultraviolet, heat stabilized, fi re retardant and also are available in a range of colors. Custom designs and colors available upon request.
Heat Shrink Products
Heat shrinkable products include thin wall, medium and heavy wall, adhesive lined, medium and high voltage insula on, molded parts and end caps, cold shrink, wide
range of shrink tubing kits and heat shrinkable cable and wire iden ca on tubing.
F
-
S
D
A
C & DC F
a
n
s
a
n
d
Acc
esso
ri
e
s
P
 P C D
AC Receptacle
s
patented
noise
reduc
on
vibra
on
sleeves
.
W
 M, C A  I D
Cable Assemblie
s

Products related to this Datasheet

CBL TIE LOCKING BLK 50LBS 7.48"
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 7.48"
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 7.48"
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 7.48"
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 9.84"
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 9.84"
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 9.84"
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 9.84"
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 11.81"
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 11.81"
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 11.81"
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 11.81"
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 1.148'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 1.148'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 1.148'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 1.148'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 1.214'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 1.214'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 1.214'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 1.214'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 1.25'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 1.25'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 1.25'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 1.25'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 1.28'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 1.28'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 1.28'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING NAT 50LBS 1.28'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 1.312'
Available Quantity: 0
Unit Price: 0
CBL TIE LOCKING BLK 50LBS 1.312'
Available Quantity: 0
Unit Price: 0