MPCH Series Datasheet by KEMET

View All Related Products | Download PDF Datasheet
E‘ectromc Components KEIl/IEI' CHARGED.‘
1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9003_MPCH • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
Benefits
Metal composite powder
Operating temperature up to +125°C
High current
High permeability
Low DCR
Low acoustic noise
SMD Inductors
Large-Current Power Inductors MPCH
Part Number System
MPCH 0730 LR12
Series Size Code Inductor Inductance Code µH
MPCH 0730
0740
1040
1055
1060
1250
R = Decimal point
Examples:
R12 = 0.12 µH
1R3 = 1.30 µH
Overview
The KEMET MPCH metal composite inductors are designed
for use in power supplies with ripple currents up to 32 A.
These inductors offer superior permeability when compared
to technologies based on ferrite cores.
The flat wire design allows for high efficiency under high
current loads.
Applications
Switching DC-DC power supplies
• Notebook computers
• Tablets
Embedded computer systems
Servers and storage
HDTVs
ammmc compmm KEIVIEI' EHARGED! MPCH0730LR12 MPCH0730LR24
2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9003_MPCH • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SMD Inductors
Large-Current Power Inductors MPCH
Performance Characteristics
Item Performance Characteristics
Operating Temperature
–40°C to +125°C (including self-temperature rise)
Rated Inductance Range
0.12 – 1.50 µH at 100 kHz, 1 mA
Inductance Tolerance
±20%
Rated DC Resistance Range
0.65 – 2.30 mΩ
DC Resistance Tolerance
±10%
Rated Current Range
17 – 32 A
Table 1 – Ratings & Part Number Reference
Part Number Inductance (µH)
at 100 kHz, 1 mA
Inductance
Tolerance
DC Resistance
(mΩ) ±10%
Rated Current (A)
Irms1 (Ref.) Isat2 (Ref.)
MPCH0730LR12 0.12 ±20% 0.65 31.00 32.00
MPCH0730LR24 0.24 ±20% 1.20 23.00 18.50
MPCH0740LR15 0.15 ±20% 0.93 29.00 31.00
MPCH0740LR24 0.24 ±20% 0.96 27.00 20.00
MPCH0740LR36E* 0.36 ±20% 1.42 23.00 22.00
MPCH1040LR36 0.36 ±20% 0.88 28.00 24.00
MPCH1040LR68 0.68 ±20% 1.35 22.00 24.00
MPCH1040L1R0 1.00 ±20% 2.30 17.00 17.00
MPCH1055L1R3 1.30 ±20% 2.30 18.50 17.00
MPCH1060LR45 0.45 ±20% 0.76 32.00 32.00
MPCH1250L1R5 1.50 ±20% 2.20 21.00 21.00
1 T = 40 K rise at rated current
2 Inductance drop 20% at rated current
All electrical characteristics data is referenced to 20°C.
* This part is not for new design.
DC-Superposed Characteristics
Power Inductors VOL.11
12
SMD Type
IDC (A) IDC (A)
IDC (A)IDC (A)
IDC (A)IDC (A)
IDC (A) IDC (A)
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0 5 10 15 20 25 30 35 40 0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.00
0.20
0.40
0.60
0.80
1.00
1.20
035202510150035202510150
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
DC-Superposed Characteristics
Inductance (µH)
Inductance (µH)
MPCH0730LR12 MPCH0730LR24
Inductance (µH)
MPCH0740LR15
Inductance (µH)
MPCH0740LR24
Inductance (µH)
MPCH0740LR36E*
Inductance (µH)
MPCH1040LR36
Inductance (µH)
MPCH1040L1R0
Inductance (µH)
MPCH1055L1R3
ammm Compancnls KEIl/IEI' CHARGED! MPCH0740LR15 MPCH0740LR24 MPCH0740LR36E* MPCH1040LR36 me (A)
3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9003_MPCH • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SMD Inductors
Large-Current Power Inductors MPCH
DC-Superposed Characteristics cont’d
Power Inductors VOL.11
12
SMD Type
IDC (A) IDC (A)
IDC (A)IDC (A)
IDC (A)IDC (A)
IDC (A) IDC (A)
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0 5 10 15 20 25 30 35 40 0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.00
0.20
0.40
0.60
0.80
1.00
1.20
035202510150035202510150
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
DC-Superposed Characteristics
Inductance (µH)
Inductance (µH)
MPCH0730LR12 MPCH0730LR24
Inductance (µH)
MPCH0740LR15
Inductance (µH)
MPCH0740LR24
Inductance (µH)
MPCH0740LR36E*
Inductance (µH)
MPCH1040LR36
Inductance (µH)
MPCH1040L1R0
Inductance (µH)
MPCH1055L1R3
Power Inductors VOL.11
12
SMD Type
IDC (A) IDC (A)
IDC (A)IDC (A)
IDC (A)IDC (A)
IDC (A) IDC (A)
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0 5 10 15 20 25 30 35 40 0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.00
0.20
0.40
0.60
0.80
1.00
1.20
035202510150035202510150
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
DC-Superposed Characteristics
Inductance (µH)
Inductance (µH)
MPCH0730LR12 MPCH0730LR24
Inductance (µH)
MPCH0740LR15
Inductance (µH)
MPCH0740LR24
Inductance (µH)
MPCH0740LR36E*
Inductance (µH)
MPCH1040LR36
Inductance (µH)
MPCH1040L1R0
Inductance (µH)
MPCH1055L1R3
* This part is not for new design.
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 5 10 15 20 25 30
Inductance [μH]
lDC (A)
MPCH1040LR68
ammm Compancnls KEIl/IEI' CHARGED! MPCH1040L1R0 MPCH1055L‘I R3
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9003_MPCH • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SMD Inductors
Large-Current Power Inductors MPCH
DC-Superposed Characteristics cont’d
Power Inductors VOL.11
12
SMD Type
IDC (A) IDC (A)
IDC (A)IDC (A)
IDC (A)IDC (A)
IDC (A) IDC (A)
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0 5 10 15 20 25 30 35 40 0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
0 5 10 15 20 25 30 35 40
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.00
0.20
0.40
0.60
0.80
1.00
1.20
035202510150035202510150
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
DC-Superposed Characteristics
Inductance (µH)
Inductance (µH)
MPCH0730LR12 MPCH0730LR24
Inductance (µH)
MPCH0740LR15
Inductance (µH)
MPCH0740LR24
Inductance (µH)
MPCH0740LR36E*
Inductance (µH)
MPCH1040LR36
Inductance (µH)
MPCH1040L1R0
Inductance (µH)
MPCH1055L1R3
DC Current (A)
Inductance (µH)
MPCH1060LR45
0510 15 20 25 30 35 40 45 50
0.00
0.10
0.20
0.30
0.40
0.50
0.60
DC Current (A)
MPCH1250L1R5
0510 15 20 25
0.0
0.5
1.0
1.5
0.2
Inductance (µH)
ammm Compancnls Emma): $1: 5%?
5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9003_MPCH • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SMD Inductors
Large-Current Power Inductors MPCH
Dimensions
Case Size Dimensions (mm) Land Pattern (mm)
MPCH0730
MPCH0740
MPCH0730
MPCH1040
MPCH1055
MPCH1060
MPCH1250
8.0 maximum
3.0 maximum (MPCH0730)
4.0 maximum (MPCH0740)
6.7 ±0.3
2.0 ±0.3
2.6
1.5
11.5 maximum 4.0 maximum 3.0 ±0.5 (Others)
3.5 ±0.5 (R68)
10.0 ±0.3
2.1
11.7 maximum 5.5 maximum
10.0 ±0.3
3.0 ±0.5
2.1
5.0 maximum
14.3 maximum
12.50
3.0 ±0.5
2.2
3.6
3.3 8.7 3.3
12.0 maximum
10.0 ±0.3
3.5 ±0.5
4.1
3.75.23.7
3.6
5.93.3 3.3
3.6 (Others)
4.1 (R68)
5.93.3 3.3
3.52.7 2.7
2.1
6.0 maximum
MPCH0730
MPCH1040
MPCH1055
MPCH1060
MPCH1250
8.0 maximum
3.0 maximum (MPCH0730)
4.0 maximum (MPCH0740)
6.7 ±0.3
2.0 ±0.3
2.6
1.5
11.5 maximum 4.0 maximum 3.0 ±0.5 (Others)
3.5 ±0.5 (R68)
10.0 ±0.3
2.1
11.7 maximum 5.5 maximum
10.0 ±0.3
3.0 ±0.5
2.1
5.0 maximum
14.3 maximum
12.50
3.0 ±0.5
2.2
3.6
3.3 8.7 3.3
12.0 maximum
10.0 ±0.3
3.5 ±0.5
4.1
3.75.23.7
3.6
5.93.3 3.3
3.6 (Others)
4.1 (R68)
5.93.3 3.3
3.52.7 2.7
2.1
6.0 maximum
MPCH1040
MPCH0730
MPCH1040
MPCH1055
MPCH1060
MPCH1250
8.0 maximum
3.0 maximum (MPCH0730)
4.0 maximum (MPCH0740)
6.7 ±0.3
2.0 ±0.3
2.6
1.5
11.5 maximum 4.0 maximum 3.0 ±0.5 (Others)
3.5 ±0.5 (R68)
10.0 ±0.3
2.1
11.7 maximum 5.5 maximum
10.0 ±0.3
3.0 ±0.5
2.1
5.0 maximum
14.3 maximum
12.50
3.0 ±0.5
2.2
3.6
3.3 8.7 3.3
12.0 maximum
10.0 ±0.3
3.5 ±0.5
4.1
3.75.23.7
3.6
5.93.3 3.3
3.6 (Others)
4.1 (R68)
5.93.3 3.3
3.52.7 2.7
2.1
6.0 maximum
MPCH0730
MPCH1040
MPCH1055
MPCH1060
MPCH1250
8.0 maximum
3.0 maximum (MPCH0730)
4.0 maximum (MPCH0740)
6.7 ±0.3
2.0 ±0.3
2.6
1.5
11.5 maximum 4.0 maximum 3.0 ±0.5 (Others)
3.5 ±0.5 (R68)
10.0 ±0.3
2.1
11.7 maximum 5.5 maximum
10.0 ±0.3
3.0 ±0.5
2.1
5.0 maximum
14.3 maximum
12.50
3.0 ±0.5
2.2
3.6
3.3 8.7 3.3
12.0 maximum
10.0 ±0.3
3.5 ±0.5
4.1
3.75.23.7
3.6
5.93.3 3.3
3.6 (Others)
4.1 (R68)
5.93.3 3.3
3.52.7 2.7
2.1
6.0 maximum
MPCH1055
MPCH0730
MPCH1040
MPCH1055
MPCH1060
MPCH1250
8.0 maximum
3.0 maximum (MPCH0730)
4.0 maximum (MPCH0740)
6.7 ±0.3
2.0 ±0.3
2.6
1.5
11.5 maximum 4.0 maximum 3.0 ±0.5 (Others)
3.5 ±0.5 (R68)
10.0 ±0.3
2.1
11.7 maximum 5.5 maximum
10.0 ±0.3
3.0 ±0.5
2.1
5.0 maximum
14.3 maximum
12.50
3.0 ±0.5
2.2
3.6
3.3 8.7 3.3
12.0 maximum
10.0 ±0.3
3.5 ±0.5
4.1
3.75.23.7
3.6
5.93.3 3.3
3.6 (Others)
4.1 (R68)
5.93.3 3.3
3.52.7 2.7
2.1
6.0 maximum
MPCH0730
MPCH1040
MPCH1055
MPCH1060
MPCH1250
8.0 maximum
3.0 maximum (MPCH0730)
4.0 maximum (MPCH0740)
6.7 ±0.3
2.0 ±0.3
2.6
1.5
11.5 maximum 4.0 maximum 3.0 ±0.5 (Others)
3.5 ±0.5 (R68)
10.0 ±0.3
2.1
11.7 maximum 5.5 maximum
10.0 ±0.3
3.0 ±0.5
2.1
5.0 maximum
14.3 maximum
12.50
3.0 ±0.5
2.2
3.6
3.3 8.7 3.3
12.0 maximum
10.0 ±0.3
3.5 ±0.5
4.1
3.75.23.7
3.6
5.93.3 3.3
3.6 (Others)
4.1 (R68)
5.93.3 3.3
3.52.7 2.7
2.1
6.0 maximum
MPCH1060
MPCH0730
MPCH1040
MPCH1055
MPCH1060
MPCH1250
8.0 maximum
3.0 maximum (MPCH0730)
4.0 maximum (MPCH0740)
6.7 ±0.3
2.0 ±0.3
2.6
1.5
11.5 maximum 4.0 maximum 3.0 ±0.5 (Others)
3.5 ±0.5 (R68)
10.0 ±0.3
2.1
11.7 maximum 5.5 maximum
10.0 ±0.3
3.0 ±0.5
2.1
5.0 maximum
14.3 maximum
12.50
3.0 ±0.5
2.2
3.6
3.3 8.7 3.3
12.0 maximum
10.0 ±0.3
3.5 ±0.5
4.1
3.75.23.7
3.6
5.93.3 3.3
3.6 (Others)
4.1 (R68)
5.93.3 3.3
3.52.7 2.7
2.1
6.0 maximum
MPCH0730
MPCH1040
MPCH1055
MPCH1060
MPCH1250
8.0 maximum
3.0 maximum (MPCH0730)
4.0 maximum (MPCH0740)
6.7 ±0.3
2.0 ±0.3
2.6
1.5
11.5 maximum 4.0 maximum 3.0 ±0.5 (Others)
3.5 ±0.5 (R68)
10.0 ±0.3
2.1
11.7 maximum 5.5 maximum
10.0 ±0.3
3.0 ±0.5
2.1
5.0 maximum
14.3 maximum
12.50
3.0 ±0.5
2.2
3.6
3.3 8.7 3.3
12.0 maximum
10.0 ±0.3
3.5 ±0.5
4.1
3.75.23.7
3.6
5.93.3 3.3
3.6 (Others)
4.1 (R68)
5.93.3 3.3
3.52.7 2.7
2.1
6.0 maximum
MPCH1250
MPCH0730
MPCH1040
MPCH1055
MPCH1060
MPCH1250
8.0 maximum
3.0 maximum (MPCH0730)
4.0 maximum (MPCH0740)
6.7 ±0.3
2.0 ±0.3
2.6
1.5
11.5 maximum 4.0 maximum 3.0 ±0.5 (Others)
3.5 ±0.5 (R68)
10.0 ±0.3
2.1
11.7 maximum 5.5 maximum
10.0 ±0.3
3.0 ±0.5
2.1
5.0 maximum
14.3 maximum
12.50
3.0 ±0.5
2.2
3.6
3.3 8.7 3.3
12.0 maximum
10.0 ±0.3
3.5 ±0.5
4.1
3.75.23.7
3.6
5.93.3 3.3
3.6 (Others)
4.1 (R68)
5.93.3 3.3
3.52.7 2.7
2.1
6.0 maximum
MPCH0730
MPCH1040
MPCH1055
MPCH1060
MPCH1250
8.0 maximum
3.0 maximum (MPCH0730)
4.0 maximum (MPCH0740)
6.7 ±0.3
2.0 ±0.3
2.6
1.5
11.5 maximum 4.0 maximum 3.0 ±0.5 (Others)
3.5 ±0.5 (R68)
10.0 ±0.3
2.1
11.7 maximum 5.5 maximum
10.0 ±0.3
3.0 ±0.5
2.1
5.0 maximum
14.3 maximum
12.50
3.0 ±0.5
2.2
3.6
3.3 8.7 3.3
12.0 maximum
10.0 ±0.3
3.5 ±0.5
4.1
3.75.23.7
3.6
5.93.3 3.3
3.6 (Others)
4.1 (R68)
5.93.3 3.3
3.52.7 2.7
2.1
6.0 maximum
ammmc compmm KEIVIEI' crummy: ,,,,.,¢o,¢,.¢,.,¢ , ‘
6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9003_MPCH • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SMD Inductors
Large-Current Power Inductors MPCH
Taping Specification
Dimensions of Indented Square Hole Plastic Tape
Reel Dimensions
F
W
E
P1
P0P2øD0
T
W2
W1
B
A
C
E
E
C
D
Enlarged
View
D
Case
Size
Reel
Quantity
W F E P
1
P
2
P
0
øD
0
T
MPCH0730
MPCH0740 1,000
Tolerance
±0.2
±0.1
±0.1
±0.1
±0.1
±0.1
±0.05
±0.05
Nominal
16.0
7.5
1.75
12.0
2.0
4.0
1.55
0.4
MPCH1040 1,000
Tolerance
±0.3
±0.1
±0.1
±0.1
±0.1
±0.1
±0.05
±0.05
Nominal
24.0
11.5
1.75
16.0
2.0
4.0
1.55
0.4
MPCH1055
500
Tolerance
±0.2
±0.1
±0.1
±0.1
±0.1
±0.1
±0.05
±0.05
Nominal
24.0
11.5
1.75
24.0
2.0
4.0
1.55
0.4
MPCH1060
Tolerance
±0.2
±0.1
±0.1
±0.1
±0.1
±0.1
±0.05
±0.05
Nominal
24.0
11.5
1.75
24.0
2.0
4.0
1.55
0.4
MPCH1250
Tolerance
±0.2
±0.1
±0.1
±0.1
±0.1
±0.1
±0.05
±0.05
Nominal
24.0
11.5
1.75
24.0
2.0
4.0
1.55
0.4
Reel Specifications
Dimensions of Indented Square Hole Plastic Tape
Reel Dimensions
F
W
E
P1
P0P2øD0
T
W2
W1
B
A
C
E
E
C
D
Enlarged
View
D
Case
Size
Dimensions (mm)
A B C D EW
1
W
2
MPCH0730,
MPCH0740
Tolerance
±2.0
±1.0
±0.5
±0.8
±0.5
±1.0
±1.0
Nominal
ø330
ø80
ø13.0
ø21.0
2.0
17.5
21.5
MPCH1040
Tolerance
±2.0
±1.0
±0.5
±0.8
±0.5
±2.0
±3.0
Nominal
ø380
ø80
ø13.0
ø21.0
2.0
24.4
30.4
MPCH1055
MPCH1060
MPCH1250
Tolerance ±2.0 ±1.0 ±0.5 ±0.8 ±0.5 ±2.0 ±3.0
Nominal ø380 ø100 ø13.0 ø21.0 2.0 24.4 30.4
cccccccccccccccccccc EHARGED!
7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9003_MPCH • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SMD Inductors
Large-Current Power Inductors MPCH
Soldering Process
Recommended Reflow Soldering Profile
Reference ICP/JEDEC J-STD-020E
Profile Feature Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)
150°C
Temperature Maximum (T
Smax
)200°C
Time (ts) from Tsmin to Tsmax
60 – 120 seconds
Ramp-up Rate (TL to TP)3°C/second maximum
Liquidous Temperature (TL)217°C
Time Above Liquidous (tL) 60 – 150 seconds
Peak Temperature (TP)250°C for MPCH07xx
245°C for MPCH1xxx
Time within 5°C of Maximum Peak
Temperature (t
P
)30 seconds maximum
Ramp-down Rate (TP to TL)6°C/second maximum
Time 25°C to Peak Temperature 8 minutes maximum
Time
Temperature
Tsmin
25
Tsmax
TL
TPMaximum Ramp-up Rate = 3°C/second
Maximum Ramp-down Rate = 6°C/second
tP
tL
ts
25°C to Peak
Handling Precautions
Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and
long term storage.
KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70%
relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should
be minimized to avoid condensation on the parts. For optimized solderability, inductors’ stock should be used promptly,
preferably within six months of receipt.
Export Control
For customers in Japan
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export
license specified by the law is required for export.
For customers outside Japan
Inductors should not be used or sold for use in the development, production, stockpiling or utilization of any conventional
weapons or mass-destruction weapons (nuclear, chemical, biological weapons or missiles), or any other weapons.
ammmc compmm KEIVIEI' cumin:
8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L9003_MPCH • 3/26/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
SMD Inductors
Large-Current Power Inductors MPCH
KEMET Electronics Corporation Sales Offi ces
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.

Products related to this Datasheet

FIXED IND 240NH 27A 1 MOHM SMD
Available Quantity: 44
Unit Price: 2.97