HMC836LP6CE Datasheet by Analog Devices Inc.

View All Related Products | Download PDF Datasheet
u ANALOG DEVICES Rnfls/ T E s u 1 z N a: m m N m w m w N ma w R V N V N V N N ”B G a Wu; H 7x. WV We} a. a j Whiz M m mic ‘ L H m\ @385 N e w w R m lbw; U T u m M m N R W02 M E @ Rm We; «W W W mm me Wu; H mp No; if P C AVDD :] N/C 3 VPPCP Z] N/C E N/C 3] VDDCP E N/C I] N/C E RVDD E
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 1
HMC836LP6CE
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 3365 - 3705 MHz
v07.1211
Functional Diagram
Features
RF Bandwidth: 3365 to 3705 MHz
Ultra Low Phase Noise
-98 dBc/Hz in Band Typ
Figure of Merit (FOM) -227 dBc
< 180 fs rms Jitter
(Integrated 100 Hz to 100 MHz SSB)
24-bit Frequency Step Size,
Resolution 3 Hz typ
Exact Frequency Mode
Built-in Digital Self Test
40 Lead 6x6 mm SMT Package: 36 mm2
Typical Applications
Cellular/4G Infrastructure
Repeaters and Femtocells
Communications Test Equipment
CATV Equipment
Phased Array Applications
DDS Replacement
Very High Data Rate Radios
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES Rnfls/
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 2
General Description
The HMC836LP6CE is a fully functioned Fractional-N Phase-Locked-Loop (PLL) with an Integrated Voltage Controlled
Oscillator (VCO). The PLL consists of an integrated low noise VCO with x2 output, an autocalibration subsystem for
low voltage VCO tuning, a very low noise digital Phase Detector (PD), a precision controlled charge pump, a low noise
reference path divider and a fractional divider.
The fractional PLL features an advanced delta-sigma modulator design that allows both fine step sizes and low
spurious products. The phase detector (PD) features cycle slip prevention (CSP) technology to allow faster frequency
hopping times. Ultra low in-close phase noise and low spurious also allows wider loop bandwidths for faster frequency
hopping and low micro-phonics.
For theory of operation and register map refer to the “PLLs with Integrated VCOs - RF VCOs Operating Guide. To
view the Operating Guide, please visit www.hittite.com and choose HMC836LP6CE from the “Search by Part
Number” pull down menu.
HMC836LP6CE
v07.1211
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 3365 - 3705 MHz
Parameter Condition Min. Ty p. Max. Units
RF Output Characteristics
VCO Frequency 1682.5 1852.5 MHz
RF Output Frequency at fVCO x2 3365 3705 MHz
RF Output Power at fVCO x2 -1 6 9 dBm
VCO Tuning Sensitivity Measured at 2 GHz, 2V 15 MHz/V
VCO Supply Pushing Measured at 2 GHz, 2V -2 1.5 MHz/V
RF Output 2nd Harmonic -25 dBc
RF Output 3rd Harmonic -23 dBc
RF Output 4th Harmonic -31 dBc
RF Divider Characteristics
19-Bit N-Divider Range (Integer) Max = 219 - 1 16 524,287
19-Bit N-Divider Range (Fractional) Fractional nominal divide ratio
varies (-3 / +4) dynamically max 20 524,283
REF Input Characteristics
Ref Input Frequency
Synthesizer phase noise can
degrade by about 5dB when oper-
ating with a reference frequency
near the low end of this range.
10 50 200 MHz
Ref Input Range AC Coupled 1.5 23.3 Vpp
Ref Input Capacitance 5pF
14-Bit R-Divider Range 116,383
Phase Detector (PD)
PD Frequency Fractional Feedback Mode [1] 0.1 100 MHz
PD Frequency Fractional Feedforward
Mode (and Register 6 [17:16] = 10)
[1] 0.1 80 MHz
PD Frequency Integer Mode [1] 0.1 125 MHz
Electrical Specifications, TA = +25° C
VPPCP, VDDCP, VCC1, VCC2 = 5V ±4%; RVDD, AVDD, DVDD3V, VCCPD, VCCHF, VCCPS =
3.3V ±6% GNDCP = GNDLS = Ground Paddle = 0V
Note 1: This maximum phase detector frequency can only be achieved if the minimum N value is respected. eg. In the case of fractional feedback
mode, the maximum PFD rate = fvco/20 or 100MHz, whichever is less.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES Rnfls/
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 3
Parameter Condition Min. Ty p. Max. Units
Charge Pump
Output Current 0.02 2.54 mA
Charge Pump Gain Step Size (5-Bits) 20 µA
PD/Charge Pump SSB Phase Noise 50 MHz Ref, Input Referred,
1 kHz -141 dBc/Hz
10 kHz add 1 dB for fractional -149 dBc/Hz
100 kHz add 3 dB for fractional -153 dBc/Hz
Logic Inputs
VIH Input High Voltage DVDD3V-0.4 DVDD3V V
VIL Input Low Voltage 0 0.4 V
Logic Outputs
VOH Output High Voltage DVDD3V-0.4 DVDD3V V
VOL Output Low Voltage 00.4 V
Power Supply Voltages
Analog 3.3V Supplies AVDD, VCCHF, VCCPS,
VCCPD, RVDD 3.0 3.3 3.5 V
Digital Supply DVDD3V 3.0 3.3 3.5 V
Analog 5V Supplies VPPCP, VDDCP, VCC1, VCC2 4.8 55.2 V
Power Supply Currents
+5V Analog Charge Pump VPPCP, VDDCP 5.3 mA
+5V VCO Core and PLL Buffer VCC2 56 mA
+5V VCO RF Buffer VCC1 36 mA
+3.3V Analog AVDD, VCCHF, VCCPS, VCCPD,
RVDD 45 mA
+3.3V Digital DVDD3V 6.5 mA
Power Down - Crystal Off Reg 01h=0,
Crystal Not Clocked 10 µA
Power Down - Crystal On, 100 MHz Reg 01h=0,
Crystal Clocked 100 MHz 10 200 µA
Power on Reset
Typical Reset Voltage on DVDD 700 mV
DVDD Voltage for No Reset 1.5 V
Power on Reset Delay 250 µs
VCO Open Loop SSB Phase Noise at fo = 1.75 GHz
10 kHz Offset -91 dBc/Hz
100 kHz Offset -111 dBc/Hz
1 MHz Offset -136 dBc/Hz
10 MHz Offset -157 dBc/Hz
100 MHz Offset -169 dBc/Hz
Closed Loop Phase Noise PLL + VCO at fo = 3.5 GHz
Integer, 50 MHz PFD 1 kHz Offset -102 dBc/Hz
Integer, 50 MHz PFD 10 kHz Offset -107 dBc/Hz
Integer, 50 MHz PFD 100 kHz Offset -107 dBc/Hz
HMC836LP6CE
v07.1211
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 3365 - 3705 MHz
Electrical Specifications (Continued)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES Rnfls/
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 4
Electrical Specifications (Continued)
HMC836LP6CE
v07.1211
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 3365 - 3705 MHz
Typical Closed Loop
Fractional Mode, SSB Phase Noise [1]
Closed Loop
Integer Mode, SSB Phase Noise
VCO Free Running SSB Phase Noise
Parameter Condition Min. Ty p. Max. Units
Fractional, 50 MHz PFD 1 kHz Offset -197 dBc/Hz
Fractional, 50 MHz PFD 10 kHz Offset -102 dBc/Hz
Fractional, 50 MHz PFD 100 kHz Offset -102 dBc/Hz
Figure of Merit Normalized 1 Hz
Integer Mode Measured w/ 50 MHz PD
at 30 kHz Offset -229 dBc/Hz
Fractional Mode Measured w/ 50 MHz PD
at 30 kHz Offset -227 dBc/Hz
[1] Fractional Mode, 50 MHz Crystal, R=1, ~80 kHz Loop BW, (Loop filter values: Contact factory for component values) 2mA Charge Pump, -385µA
Offset.
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
-70
100 1000 104105106107108
3300 MHz
3500 MHz
3700 MHz
FREQUENCY OFFSET (Hz)
PHASE NOISE (dBc/Hz)
-180
-160
-140
-120
-100
-80
-60
-40
-20
0
102103104105106107108
3300 MHz
3500 MHz
3700 MHz
FREQUENCY OFFSET (Hz)
PHASE NOISE (dBc/Hz)
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
-70
100 1000 104105106107108
3365 MHz
3535 MHz
3705 MHz
FREQUENCY OFFSET (Hz)
PHASE NOISE (dBc/Hz)
Typical Tuning Curves vs. Switch Position
012345
TUNING VOLTAGE (V)
kvco (MHz/V)
n0 n2
n4
n6
n8
n10
n12
n14
n16
n18
n20
n22
n24
n26 n30
fmax
fmin n30 n31
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 5
HMC836LP6CE
v07.1211
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 3365 - 3705 MHz
Figure of MeritTypical Output Power
Typical VCO Tuning Voltage After Calibration
vs. VCO Frequency & CAP Setting [2]
Typical VCO Sensitivity vs. VCO Tune
Voltage & CAP Setting @ fo [2]
[1] Fractional Mode, 50 MHz Crystal, R=1, ~80 kHz Loop BW, (Loop filter values: Contact factory for component values) 2mA Charge Pump, -385µA
Offset.
[2] The CAP setting is the digitally selectable VCO tank capacitor setting. This feature allows the nominal center frequency of the VCO to be
adjusted by switching in/out VCO tank capacitors.
0
2
4
6
8
10
3300 3400 3500 3600 3700 3800
+27C
+85C
-40C
OUTPUT FREQUENCY (MHz)
OUTPUT POWER (dBm)
-240
-230
-220
-210
-200
102103104105106
NORMALIZED PHASE NOISE (dBc/Hz)
FREQUENCY OFFSET (Hz)
FOM Floor
FOM 1/f Noise
Typ FOM vs Offset
0
1
2
3
4
5
VCO FREQUENCY
TUNE VOLTAGE AFTER CALIBRATION (V)
0
15
31
fmin fmax
0
10
20
30
40
50
60
012345
TUNING CAP 31
TUNING CAP 15
TUNING CAP 0
TUNING VOLTAGE (V)
kvco (MHz/V)
Typical Operating Range
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES Rnfls/
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 6
HMC836LP6CE
v07.1211
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 3365 - 3705 MHz
Pin Descriptions
Pin Number Function Description
1AVDD DC Power Supply for analog circuitry.
2, 5, 6, 8, 9,
11 - 14, 18 - 22,
24, 26, 29, 34, 37, 38
N/C The pins are not connected internally; however, all data shown herein was measured
with these pins connected to RF/DC ground externally.
3VPPCP Power Supply for charge pump analog section
4CP Charge Pump Output
7VDDCP Power Supply for the charge pump digital section
10 RVDD Reference Supply
15 XREFP Reference Oscillator Input
16 DVDD3V DC Power Supply for Digital (CMOS) Circuitry
17 CEN Chip Enable. Connect to logic high for normal operation.
23 VTUNE VCO Varactor. Tuning Port Input.
25 VCC2 VCO Analog Supply 2
27 VCC1 VCO Analog Supply 1
28 RFOUT RF Doubler Output
30 SEN PLL Serial Port Enable (CMOS) Logic Input
31 SDI PLL Serial Port Data (CMOS) Logic Input
32 SCK PLL Serial Port Clock (CMOS) Logic Input
33 LD_SDO Lock Detect, or Serial Data, or General Purpose (CMOS) Logic Output (GPO)
35 VCCHF DC Power Supply for Analog Circuitry
36 VCCPS DC Power Supply for Analog Prescaler
39 VCCPD DC Power Supply for Phase Detector
40 BIAS
External bypass decoupling for precision bias circuits.
Note: 1.920V ±20mV reference voltage (BIAS) is generated internally and cannot
drive an external load. Must be measured with 10GΩ meter such as Agilent 34410A,
normal 10MΩ DVM will read erroneously.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES may m u IEW TOP V .249 5.10 fan 5.90 no :IT‘ 2303 w so °3 «M .240 .212 21 .055 0.90 E31 up 10 LOT NUMBER .001 0.05 7 D D 7 sums o—a um Stresses above those \Isted underAbsolute Maxwmum e. e 9 BOTTOM VIEW [s;::]fi r m U U U U U U U U U U 3 E\P\N I :' C 022 D 55 3 CIIon [024A] 3 C 3 C 3 \ CT 3 1: 3 C\Exposzp GROUND mm: 2 : :2;;::.::::m 1° 7 n n n n n n n n r \ a - .005 [0.20] w V437 4.75 SQU‘REa ‘ "u ["55] ~ ——.015 [0.40] REF
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 7
HMC836LP6CE
v07.1211
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 3365 - 3705 MHz
Outline Drawing
Part Number Package Body Material Lead Finish MSL Rating Package Marking [1]
HMC836LP6CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H836
XXXX
[1] 4-Digit lot number XXXX
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR
SUGGESTED PCB LAND PATTERN.
Absolute Maximum Ratings
AVDD, RVDD, DVDD3V, VCCPD,
VCCHF, VCCPS -0.3V to +3.6V
VPPCP, VD D C P, VC C1 -0.3V to +5.8V
VCC2 -0.3V to +5.5V
Operating Temperature -40°C to +85°C
Storage Temperature -65°C to 125°C
Maximum Junction Temperature 125 °C
Thermal Resistance (RTH)
(junction to ground paddle) 20 °C/W
Reflow Soldering
Peak Temperature 260°C
Time at Peak Temperature 40 sec
ESD Sensitivity (HBM) Class 1B
Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device.
This is a stress rating only; functional operation of the
device at these or any other conditions above those
indicated in the operational section of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES Rnfls/ 13 L “WNW WW WW HITrITE S3 127729-1 a Jo 35 m «
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 8
Evaluation PCB
HMC836LP6CE
v07.1211
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 3365 - 3705 MHz
The circuit board used in the final application should use RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the
ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
Evaluation PCB Schematic
To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC836LP6CE from the
“Search by Part Number” pull down menu to view the product splash page.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES Rnfls/
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 9
HMC836LP6CE
v07.1211
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 3365 - 3705 MHz
Item Description
J1, J2 PCB Mount SMA RF Connector
J3 Dual Row Terminal Strip
J4 - J6 Connector Header
C1, C15 - C17, C25 10 µF Capacitor, 0805 Pkg.
C2, C3, C6, C7, C11, C12,
C14, C18, C27, C43, C45 0.47 µF Capacitor, 0402 Pkg.
C4, C13 22 pF Capacitor, 0402 Pkg.
C5, C33 1000 pF Capacitor, 0402 Pkg.
C8 8.2 pF Capacitor, 0402 Pkg.
C19 - C24, C28, C30, C32, C34 0.1 µF Capacitor, 0402 Pkg.
C26 1.0 µF Capacitor, 0603 Pkg.
C35 3300 pF Capacitor, 0402 Pkg.
C36 270 pF Capacitor, 0402 Pkg.
C37, C38 68 pF Capacitor, 0402 Pkg.
C39 - C42, C44 4.7 µF Tantalum Capacitor, 0805 Pkg
C46 27 pF Capacitor, 0402 Pkg.
C47 47 pF Capacitor, 0402 Pkg.
R1, R2, R11, R15, R18, R19, R21, R24 Zero Ohm Resistor, 0402 Pkg.
R3, R4 1 Ohm Resistor, 0402 Pkg.
R6 1 MOhm Resistor, 0402 Pkg.
R8 22 Ohm Resistor, 0402 Pkg.
R12, R20, R29 51 Ohm Resistor, 0402 Pkg.
R13, R14, R30 220 kOhm Resistor, 0402 Pkg.
R22, R25 20 kOhm Resistor, 0402 Pkg.
R26 - R28 1k Ohm Resistor, 0402 Pkg.
R32, R33 0 Ohm Resistor, 0805 Pkg.
L1 10 nH Inductor, 0402 Pkg.
L2 68 Ohm Resistor, 0402 Pkg.
L3 4.7 nH Inductor, 0402 Pkg.
L4 1.5 nH Inductor, 0402 Pkg.
TP3, TP4 Test Point PC Compact SMT
U1 HMC836LP6CE PLL with Integrated VCO
U2 HMC860LP3E
Low Noise Quad Linear Regulator
Y1 3.3V, 50 MHz VCXO Crystal Oscillator
PCB [2] 127729 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR and FR4
List of Materials for Evaluation PCB 127832 [1]
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES Rnfls/
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
PLLS w/ Integrated VCO - SMt
7
7 - 10
HMC836LP6CE
v07.1211
FRACTIONAL-N PLL WITH
INTEGRATED VCO, 3365 - 3705 MHz
Notes:
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D

Products related to this Datasheet

IC PLL W/VCO FRACTIONAL-N 40-QFN
Available Quantity: 57
Unit Price: 18.16
KIT EVAL HMC836LP6CE
Available Quantity: 0
Unit Price: 308.41
IC PLL W/VCO FRACTIONAL-N 40-QFN
Available Quantity: 0
Unit Price: 13.464
EVAL BOARD HMC836LP6CE
Available Quantity: 0
Unit Price: 263.44