MIL-C-83723 Series, 1, 3 Datasheet by TE Connectivity Deutsch Connectors

View All Related Products | Download PDF Datasheet
Mil-Spec Connectors & Accessories EEU‘TgGH EGE Defense / Aerospace Operations... is the world’s premier manufacturer of electrical interconnection devices for use in defense, aerospace, and commercial applications. Whether you need an interconnection device for a commercial or military aircraft, missile, tank, truck transmission or a host of other applications, Deutsch has the solution you’re looking for.
Deutsch ECD Defense Aerospace Operations
5733 W. Whittier Ave., Hemet CA (USA) 92545
Phone 909/765-2200 • FAX 909/922-1544
MIL-C-83723 Series 1 & 3
Deutsch Miniature Connectors with Bayonet or Threaded
Coupling Mechanisms for MIL-C-26482-26500-38300
mil83723_ser1_3 ©Copyright 2001 Deutsch ECD
MILO-83723 Series 1 & 3 Introduction Reflecting developments in connector technology MlLr 083723 is a comprehenswe Air Force spemlication covering Circular, electrical connectors Intermateable and intermountable with earlier connector types. these devtces make it teaSIbIe to upgrade many existing electrical connecting systems Deutsch produces three basic lines ol connectors which are qualified to MIL7083723. They teature a high degree ot standardization in that contacts, tools, accessories materials finishes. assembly procedures, and basic design and per‘lormance characteristics are common for all three Deutscn lines, Contributing to a lower total installed cost and increased operational efficiency, this systems" approach prowdes the connector user With such benetits as ° Faster and simpler assembly and rework - Greater standardization oi tooling and procedures ~ Reduced training and maintenance First to quality to M|L~0783723i Doutsch connectors have been developed to Withstand the extreme envtronr mental conditions encountered by today‘s high»pertormance aircraft. They are particularly suited for applications such as: military and commercial aircratt. missiles and space vehicles and related ground support equipment. Compatible with the military’s lntegrated Wire Termination System (lWTS) and Common Termination System (CTS), these Deutsch connectors enable the user to implement a commonality program on an evolutionary basis. Specifically designed to eliminate failure modes charac~ teristic of many previous designs, almost any connecting system can be upgraded. M|L70783723 series 1 and series 3 connectors wtll mate with many of the connector types that are presently in field use, The series l connectors are interniateable and intermountable With existing MlLvC~26482 connector types Series 1: Miniature connector wttn bayonet coupling mechanism tntermateable and intermountabte wttn MicheeAaz type connectors Series 3: Miniature connector With bayonet coupling mechanism. Intermateable and intermountable wltn MlLrC-26500 and MlLvC-SBSOO bayonet coupling type connectors Series 3: Miniature connector wttn thread coupling mechanism. lntermateable and intermountable with MlL70726500 and MlLrCrGBEOO thread coupling typo connectors
This information is for reference only. Consult factory for envelope
drawings, updated specifications, and additions to the product line.
mil83723_ser1_3 ©Copyright 2001 Deutsch ECD
MILO-83723 Series 1 & 3 The bayonet coupling version ol series 3 Will intermate and intermount With MIL-026500 and MILr 038300 bayonet type connectors Thread coupling connectors of series 3 are intermate- able and intermountable With thread coupling versions ol MILO-26500 and M|L~C738300. Change over With a minimum at cost and difficulty is assured by this intermateable and intermountable ieature. Deutsch uses only high»grade materials and finishes in the fabrication ol these connectors. Aluminum components are available in either nickel or black anodize plating. Resilient components are made of fluid resistant silicone which reSists a permanent set and Will not revert upon exposure to temperature extremes. The plastic components of the connector are made ol high-strength. electrical grade material. All components are processed, manulacr tured. and quality-controlled inrhouse from raw material to finished product to assure exacting penormance and high reliability. Deutsch MlL70783723 connectors utilize crimprtype contacts that are inserted, released and removed from the rear of the connector. All that is needed is one. simple. failrsate insertion/removal tool to install or remove Wired contacts. Because the entire assembly process is pertormed at the connector rear, the possibility of damaging the critical interiace oi the connector is greatly reduced. This rear release feature also permits the removal or installation of any number of contacts Without uncoupling the connector. POSITIVE LOCKING CONTACTS When the contact has been fully inserted into the insert caVity, the contact retention tines Within the insert snap behind the shoulder ot the contact. Once seated, contacts remain locked in place, resistant to shock and Vibration. Retained between the dielectric insert and contact retention tines. contacts are safeguarded against failures due to contact pushout or pullout. Posrnvz CONTACT ENGAGEMENT The shell design, the relation of the inserts Within the shell, the location at the contact retention device Within the inserts, and the contacts themselves. are all made to precise. controlled tolerances to assure proper pin and socket engagement under worst case conditions. MULTIPLE SEALS PROVIDE PROTECTION AGAINST CONTAMINATION At the pin interface, contacts are surrounded by conicalrshaped risers on the silicone blanket of the insert which tit into chamtered lead-ins of the socket insert upon connector mating. This "cork-in~bottle" sealing effect assures indivtdual contact sealing at the connector interiace. In addition to individual contact sealing, these connectors incorporate additional protective seals to assure sealing against envrronmental extremes: interIaCIai compression seal, peripheral static/dynamic shell-to-shell seal, insert to shell seal. and redundant rear wire seals. mine WIRE so“. CONICAL RISER S'I'A'I’IC/DVNAMIC CHAHFEIED SE“ SOCKET LEAMN ornament. sun. INSERT 1o SHELL SEAL PROTECTION AGAINST BENT CONTACTS IS BUILT INTO THE DESIGN Contacts are of one basic configuration with improved geometry for greater bend resrstance. The closely- toleranced contact caVity oi the plastic insert will not accept a contact that is bent beyond prerestablished limits. The closededown de5ign also prevents unacceptable splaying ol contacts when side-loads are applied to the Wire bundle. In addition. if a pin contact should become slightly bent. the lead-in chamfer of the hard plastic socket insert acts as a tunnel, straightening the pin and guiding it into the socket lor proper engagement. Conner RETAINER
This information is for reference only. Consult factory for envelope
drawings, updated specifications, and additions to the product line.
mil83723_ser1_3 ©Copyright 2001 Deutsch ECD
6-83723 Series 1 & 3 General Specifications MIL-083723 Series 1 & 3 Dielectric withstanding voltage (test voltage): Usable wire size: At sea level: 1500 volts AC tFlMSi 20 contacts — receive conductor AWG 20 inougn 245 . Rear mseit will seat on smooth insulation loim 0A0" to Contact spacing (min. nominal). 083" CD. 20 . V 130 center to center is contacts e receive conductor AWG ‘6 through 20 15 , tea center to center Rear insert will seat on smooth tnsutation torm 053" to te . . 230 center to center 103" o D i2 contacts 7 lecelve conductor AWG i2 through t4 0“"9’“ rating: Rear insert will seat on smooth insulation term 097" to 20 . 7 5 amps 158" o D is . . , , . ts amps l2 . . 23 ainps Insulation resistance, Silicone lnsert' 5000 megohms minimum at 25%: Front and tear silicone insert are devotd oi all organic mane, Dielectric wtthstandtng voltage (test voltage) altitude: Corroston: wireo, assembled. unmated connectors wlli Withstand Meets MtL~STD 202E. Metnoa tot , Condition “B“ 33% mg {mg a: igggg ii a . Contact mlllivolt drop. 200 VAC (HMS) at H0000 it 20 is millivolis at 75 amps Durability 12 ' ' ‘ 3; mm“: 2f :2 :2”: No electrical or mecnanicai detects attei 500 cycles at " engagement and drsengagernent per MILVCVBS723 Vibration- Altitude immersion: M Ins Conilflull and e h b’t no mechanical UV 5"“ y X ‘ ‘5 Meetsrequlremerlts omit-053723 physical damage alter a total ot i2 hours Vibration (A hours in eacn at three mutually perpendicular axes) when . _ subiected to 06" DA or 20 8‘5 irorn to to 2000 to i2 Hz A" leakage, , 500A of vibration “me a‘ ambient temperatulei 25% 0' Less than 00‘ micron CU/iI/hv at 14.7 95: CM? Dal MlL-C vlbralion time at -55*c anrt 25% oi Vlbralion time at “‘7“ #200“: Physical shock: No unlocking. unmating or other unsatisiactory result alter too G‘s in each or three mutually perpendicular planes. Dielectric strength: 500 volts per mil, minimum on a .030" thick test specimen Crimp retention: Meets requirements at MlLeceaa723 Moisture resistance: insulation resistance in excess or me megonms after procedure in MlL-STDQDZE, method 106 Temperature: Operative at temperatures irom essvc to +2000 Contact retention: Contacts withstand a minimum load 0!: 20 lbs, lor size 20 25 lbs. tor size 15 30 lbs, lor size 12 in either direction: contact dlsplacemenl less than 012“
This information is for reference only. Consult factory for envelope
drawings, updated specifications, and additions to the product line.
mil83723_ser1_3 ©Copyright 2001 Deutsch ECD
MILO-83723 Series 1 & 3 Series 1 Insert Alternate Clocking Position gum, Atnqumfl'nmA: “mum u w x v z vindicate: E of Shell 1) A)” to" 2|fl° s . . . Insert Vertical ' “0 3“ The symbol mo mdlcates Q en a” NI" - - ll’lSel’l rotation In "' on no de reet Musler Keyway m o“ m“ g “ otshell a. HA 0" )Ifl” AM a" 90° In" 2a)“ m“ ma 5" «7° us“ me 295° n. o m “a o o a Pm Insert M o" 40 u m 273 Face View "” ”u 0.. ”a (Socket Insert ms 0" m nu“ m° m' Face opposite.) tun 0‘ XS" Itfl‘ ”0° 27!)“ II-I‘l U“ m“ to" ”3° I»! a“ SI" |32° m“ lit“ Ib—Z) n“ ”I“ In“ ‘ [A 1. a" so“ 275” )3!“ NOTES wt 0" III)" I . . . t I“) a, n. W, w» my I, For alternate polanzrng posmons, the connector tnsert ts o , u S a rotated in respect to the shell. rum 0 no m m m. 2 " ° "22°29 A, . ,, , .4 ,, . . m : 3.1:" 11;); 2. ln Normal Positron (posmon N ) the Insert vertical ”“ n centerhne comcideswith the eenterline of the masler key- 203! 0“ (1" HI" 157” )1! way Or the Shell. 104A I)“ A)“ m" 115" 2"” “P 3. In "Alternate Positions" (positions “W", “X", “Y”, and 11'“ "‘ N ”3° ”3" ”V“ “2") the pin mserl is rotated at degrees clockwise rela- mz v“ u“ m" In" 2"" tive to Q or the master Keyway ofshell. Zldl o“ )1” Us“ to." m; a“ 10" m“ m“ m" 4. In “Alternate Positions" (posltions “W”, “X", “Y”, and m, a” 10° m" us" “2") the socket insert is rotated at degrees counterclock- mt a° co" 225° 151° wrse relatwe to the Q of the master keyway of shell. I“. a“ ’0" no“ m° rm
This information is for reference only. Consult factory for envelope
drawings, updated specifications, and additions to the product line.
mil83723_ser1_3 ©Copyright 2001 Deutsch ECD
MILO-83723 Series 1 & 3 Series 3 Shell Alternate Keying Position Master Key C0 Plug Face shown (Keyways in Receptacle Shell are onnositc) NOTES. I. In me “Almnm Keying Position“ (positions a, 7, 8. 9, 4 10). the keys are posxuoned as Indicated in the chart below wuh reference 10 master key. 2 When 1h: 311mm men keying posiuon: are used, :11: Ippll- cable Insen |s Ilwuys in (he nDlmnl pmmon. KEY/KEYWAY LOCATIONS “WING snzas SIZE 10 SIZE 12 THRU 24 posmou A 3° c" 0° A° B“ c“ 0° A“ a” c" 0° NORMAL 105 140 215 165 105 no 215 265 105 140 215 265 6 102 132 248 320 102 132 248 320 18 149 192 259 7 80118 230 312 80 H8 230 312 92 152 222 342 8 35 140 205 275 35 140 205 275 84 IS? 204 334 9 64 155 234 304 64 155 234 304 24 135 I99 240 IO 25 HS 220 170 93 152 268 338
This information is for reference only. Consult factory for envelope
drawings, updated specifications, and additions to the product line.
mil83723_ser1_3 ©Copyright 2001 Deutsch ECD
MILO-83723 Series 1 & 3 MIL-083723 Series 1 Bayonet Coupling Connectors SHELL STYLES SQUARE FLA\ L HUUNI RbCLI’TACLLS RbSILILNT swam: HOLE MOUNI RECH’TACLE HERME'HC PANFL CUTOUT RFSILIENT SOLDER MOUNT RECEPTACLI 9 _ ‘ /T\ o “L- ‘ MM ~ 4/ PANEL anETIC (‘UI‘OUT PLUG ll) RESILIFNT m mm [mm w m: L Nous All Dlnu-nuom m mm.- N : Nmowv mug» w wum~ Nu m 33.35; mm m | I mg». Sec hgc II to: Immcn Ruummmwm m mm or km Mmmlnm owuw— C um Hm S‘mc )mmnqmml (1mm n Show“ Dnucwun 5mm m. "00! Navuw ml \vm smum “.1qu mum m: E me Cum ""H
This information is for reference only. Consult factory for envelope
drawings, updated specifications, and additions to the product line.
mil83723_ser1_3 ©Copyright 2001 Deutsch ECD
MIL-c 83723 Series 1 8x 3 Insert Arrangements 58330143) us9a (8—951 100611“) 1203(1)!) 120802-81 lilo“ 210) "(Mud-4) ”05( “-5) 3 N0 20 3 N0, 20 6 No.10 3 No.15 8 N0. 20 ID NO. 20 A No.12 5 N01”) CONTACTS CONTACTS CONTACTS CONTACTS CONTACTS CONTACTS CONTACTS CONTACTS 1 /1\ \ / / / \ / . : © © 6- 1.} 1 f1“. { 5' o I l ‘ ‘ ‘ 0‘ . ' \L w w \3/ “INN-121 l4|5(|4~l5) Ml 14718) ”Nut-l9) IWSU&B) ISZJHSVZJ) I626(lé-26) [80803-81 ”HUB-ll) 8N0 20 14 No.10 18 0.20 )9 No.20 BNO. 16 21N0.20 26 N0120 END. 12 11 No.16 ”10,“, 1N0T16 CONTACTS CONTACTS CONTACTS , CONTACTS CONTACTS CONTACTS CONTACTS CONTACTS ‘ 153003-30) 153108-32) 20160016) 20mm“) 211202312) 211102-111 29 140:20 32 No.20 16N0,16 41 No.20 12 No. 12 21110.16 1 No.11: CONTACTS CONTACTS CONTACTS CONTACTS mNTArTs CONTACTS 221102-32) Hum-41) 225502-55) 241904491 mun-31) usmtél) 32 No. 20 27 NO. 20 55 No.20 19 No.12 31 No: 16 51110 20 CONTACTS 14 No. 16 CDNTM'I'S CONTACTS CONTACTS CONTACTS CONTACTS K L M Nm 1am: Rm, Sm T Um; v~m Wynn-mu x “:“fh‘yfz “3"":3’; :33 ffl; $31 m M m m 1551! m "1 W" W :23 :ff} 3‘3: :q'n’i 2f}? if? f3“! If? m N" W N f fl 41“ W u m. 125: El if; 127‘: 2‘2! 1% {32% 131 w m m W HZ: M W! we "m 2% fl: 3:: :33? :m 11:1; 13;: 1:1 m w mm W 1:312 .011 Km m mm, :11: 111 11; 1;; 13;; 1:1; ‘13; m um Lu: 1.1M 13: mm m. x-muNEP W 31: 3:: 11,1: 32: m1 113'; 1111 11:0 1w 1:”) f 131 1‘2}? 1m. 1 m mm m m 1:3,; 11; 1;; 1,1: 1.: 131;; 13; g: ,1“ 1.»: 1.13 m) 13:; 1.». 1.511 ”Imam 131.; 5:: 3: £5; 1:: 1131 1 31:11 313 um 1m mu M 13; Tim M. 1'th 1mm” 13g 5;: 1:; 111:. 111: {-331 ] mg 5;: m 1.11: 1131 1,1413 1:3; 13» 1.711 ”mm. 1g: 1: g: g}; :1:
This information is for reference only. Consult factory for envelope
drawings, updated specifications, and additions to the product line.
mil83723_ser1_3 ©Copyright 2001 Deutsch ECD
Contact & Tooling Information PL'VCONTACT _ ‘ v _ ‘ > SOCKETL'UNIACT ”’ m i 4 4 l ”mm mm. (“VIAHS ”V SL‘LINGI‘Ll/h mm (M M k} \- m musw' mum 1 mm ;\IAX.M\x}w,\xw\ w. ”my" mum nnmm muukv “W“ mm mm, um mm W A n A}. I. , mm. mm. mm mm ‘4: wlbliflll moms/Mm rm up n .110 ms m ‘m m MSZHNVZRZ Msmmu nus-man Mama—3m» mr‘mmr mam MNYIZ‘JISMS soc RBI) in .656 .I03 .MO .0" .073 mu-Jmn‘ 1 m um u, m m Hm £th ms ’ i i ,, WWW; WWW «munmgm‘num www HJnsuA moor/mm «1r gum u. m ruj‘m mm m wumx W113 rm mm 12 .m .m .151 m: ms named“ mums—um mum]: layman-u uvms/m Ions/as mans soc W n m .1": Vin MI .151 \um UH‘(rmm|uu>M2£>IU14HI‘nulh)v-ivl‘)ll\«,\42 2mm: (1‘ w: w Mu ( 0mm (um z mmuuml \m a: sun-mm < mvluhuc="" awmhlc="" v:="" mun“="" \="" mm)="" m="" \="" lunllmkmmulm="" x="" immdinnhuhlx="" mmmmmm”="" m.="" \usm="" n‘uuup="" lhmi="" “(film="" 4="" “am!="" w="" muhlmn="" (amull="" i="" «um="" my="" mm="" ‘="" mm.="" m.“="" m="" mm="" mm="" “a="" m.="" u".="" dmmwmhvunn="" w="" ,u.»mm:mmmwnnp1m="" am="" rear="" accessories="" (4)="" 1‘="" c="" .7="" ,="" i,="" w="" ,="" [fl="" .4="" a="" -,="" 2="" x="" 7="" w"="" 7="" v="" w="" i="" ‘="" um!="" m:="" ,,="" c...="" m.="" j="" _="" 7,1="" g="" a="" .="" l="" ‘="" ‘1="" (z)="" (2)="" l2)="" ‘="" \="" 94002}!="" 94003!»="" ,="" 9400411="" .="" m="" ‘="" m83723-15nj‘2m5’="" m837zlissv*“)*‘s'="" mbs713.isa!(2‘*‘5’="" ’*="" t="" ‘="" 4="" x="" mm“="" straight="" rackshell="" cable="" clamp="" 9:)"="" end="" bell="" m.="" mammy“:="" '1)..,.~...m.~u......="" «mum;="" '="" ’="" r="" ‘="" r="" 1="" f="" ‘="" a="" mum“="" mkuwsu="" harm)="" ann="" bnmunzn="" unumumx="" bum-m;="" u="" u)="" hhs)="" 8="" 9w’-3="" 9400'-u-jon="" is'r‘="" ,6”="" il‘»’d="" unf="" .859="" 1.069="" ,138="" l”?="" j="" 10="" mm»="" m="" hum“="" m="" mu="">w m' ‘24 ,r m \‘\xl m y m “a m- l2 0400-42 «man-mm M837! [5‘-|:‘ S E )ILZOUNEF .859 12% .400 [.379 l [H umo- H 0mm ,5 :un ,, uww w w m x mm \YIM «a nu: ; l6 Wit: 46.30“ MINE-5'41? 1.] [2 L093 L523 .610 |616 u (Hm'lx Nun-Ix mu m: : h‘ls’ >3” , Hm“ “w “.1: , mo, PM 20 Uncommon Mummy-2m IJ‘S I I J/IG-IBU‘NEF 1.093 L755 A” LOB! :: wmv :nxw uww w :~- Hm - u H. mm sum [H «nu Hm u 9400-42430“ mamas-nu 1,554: l Imus UNEF um 2.000 1.055 2.111 ] m mmmmnuImmIrmHnH‘uupmu\ulm‘mmu‘ mm lll'hrm Bammm (n (mu lu VIwL MuMun m: \‘i‘u‘Jqu \31’Ux‘uvlmIIJAWHISHR m kmhcnn mmmommn um I» «mum-menu mv I)c:vul\\f|¢»\.
This information is for reference only. Consult factory for envelope
drawings, updated specifications, and additions to the product line.
mil83723_ser1_3 ©Copyright 2001 Deutsch ECD
MILO-83723 Series 1 & 3 Pa.‘Srltls-ries 1 Bayonet Coupling SERIES 1 BAYDNET COUPLING Mllltlly Dzmscrl Mmury Comet Pm Number Part Number m Number nesmvtlm Style class (A) rlmsn Class (A) 5mm class (R) Fwsh Sware Flange Receplide Socket "18372343! A"N AFDSO'A'SWGV l a M83723-01R"N Pm M83723-02A"N AFDSO-‘-'PN-61 la M83723-02R"N me Sq. rlange Recepud: Socket M63723703A'W Nasal-Sum l s M53723703R"N pm M83723704A“N Amsaeuwel l a MBSVZEVOAR'W slngle Hole Receptacle Socket «4337230sz AFDS4-'~‘SN-6l ls mans-05PM WI M83723A06A"N AFDSm'w'FNvGV l a M83723-OSR“N cable Cmnectmg Receptacle socket M83 7230va mm r'r'sufil la Mawzzrolk-‘N Pm M83723708A'W Amsl evpnem l s MeanzroskhN Square Flange, Hermetlc Pm N/A N/A M53723»09M"N Wlde Square Flange Nermetlc Pm N/A N/A M8372340H‘W Soloel Flange Nelmctlc Pm N/A N/A M33784 l H"N Slngle Hale . Hmllc Pm N/A N/A M33723-l2H“N PM: Socket M83723A13A"N AFDSG-'-’SN-6H$ M837ZZ-UH"N Rn «337234 4A“N Amsevwm l6 mean; MH’W pvewl'rea Plug Socket M83 723737M'N Bauewvsal l5 M83723737R”N hn M83723A36AHN ~P~sl l a M53723 3(5an PreVWlled Narrow Sonar: Socket M83723-39A"N 'S—Sl la M83723-39R”N Hang: Receplade Pin Neavzsesea-‘N 'P»6V l a M33723»38R"'N Pre-wlretl wlde Squate Socket ”153723741 A'w -ssl l5 M83723741R“N Flange Receptacle l>ln ulsa 723»4DA“N wMl ls M83723~40R“N SERIES 3 BAYONET COUPLING matary DEUTSCN antary Part Number Part Number Part Numbq Descvlpum Cmucl style cuss (A) Fm» ' Class (A) lesh class (R) Flrush Square Flange Receptacle Socket M83723—7l N‘N DLGOR'r'SN-GV l s Means-fl R'W om veavzarva-‘N OLSDR‘ ‘Wél ls M83723‘72R“N Slngle Hole Receptacle Socket M33723~73A“N DLGW'-'SN~G! l s M63723773R’W cm M33723776A'W atenlt'r'lwelle N8372344WN Plug Score! M83723v7SA"N alssnvsnal l6 M337234Sw'll Pm M53723»76A«N meant-mm l6 M53723»75R~N plug, R r L moundlng Sum: N/A «m: Menu-7mm 9m N/A N/A M33723778R”N Square Flange, Hermelvc l>m N/a N/A M3372349R~N Solder Flange. Helmellc Pm N/A N/A M83723'80R"N Single Hale Hermeuc Pm N/A N/A M53723-al R'W 50ml Mount Recemacle mm Extended Plns, Herman: Fm N/A N/A M83723793R"N Smge Hole Mnunl Receptacle mth Exunded Plns, Herman: Pm N/A N/A M83723-94R'W SERIES 3 THREAD COUPLING Mlllury DEUYSCH Mlataly Pm Numbzr Pzrt Number Van. Number Descnptloo Cmucl Style dag: (A) firm class (A) Flnlsh class (R) Flmsh Square Fling: Receptacle Sockel M83723752A‘W Danso'r'steel l6 M83723782R’W vln M83723VS3A"N DBASO‘JWEV l S M83723763R"N Slnge Hole Recaplacle Socket M83723~84A”N DBA34'-'SN~EI l 6 M83723-54R"N Pm M83723435A~N umsv ‘PN-EHG N53723»asll"rl Plug Socket M537zaraSA'w DBA36 5N6] l6 M53723reek'w pln M83723787A'W naAaevwrel l e M63723»B7R"N Squaw Flange Herman Pm N/A N/A M83723»88H”’N we Nola Hamutlc 9m N/A N/A ”$372379sz Solder Flange Hermeuc Pln N/A N/A MBS7Z3790H“N NOTE: "N" lN VAR! NUMBER DENOYES NORMAL PoLARlelloN
This information is for reference only. Consult factory for envelope
drawings, updated specifications, and additions to the product line.
mil83723_ser1_3 ©Copyright 2001 Deutsch ECD
Part
Part Numbers & Ordering Information
MILO-83723 Series 1 & 3 Ordering information DEUTSCH mum PM! Number Pan Numhel Class (A) mush aass (w) mesh DEmscH Pan Number Class (W) flmsh M8372370VW‘W AFosor' ~surs1 \ 7 Mason-*PMA M83723~02W"N AFDsor‘rwanx 7 7 AFD58-' “SN VA M83733703W”N Aruss ' 'SN 5! ‘ 7 AFDSEV'V‘PNJ A M83723704w'w Atnssr'r’wm 7 7 M83723wosw~w A5054" 'SN 5217 M33723 oewm AFDS4-“ 'PN a! v 7 M83723707W"N AFDSL 3mm \ ‘ AFUSL'L‘PNAA M83773708W“N AFDS‘Ir‘r'PNvSH 7 DBCSUHAAW N/A N/A DacssH-~--PN N/A N/A DBCSSHV‘V'PN N/A N/A Dacsanrvau N/A N/A "SN-IA M83723-‘3W'W AFDSE ' “wreu' 'PN-lA M5372 MW"N AFDSB * «we! ‘ 7 860097671714 M83123737w-w 'sm 1 7 asouarerwrw M83723736W"N may 7 7 88008~5-’SAA M83723~39W"N 'sm 1 / 88008781? 1A Meanidsw'w 'P 6 >7 BBD!9»BA'S>7A M83723A41W"N .379 17 eamsrawv M M83723 Aow'w asuws ‘P 6H7 DEUTSCH "(Mary Pan Number Pan Number Class (R) runs» Class (wt Fmvsh DEUYSCH Van Number class (W) Finish DLSORr'r'sNéme M837asrnw-w DLSUR»'-'sN-év ‘ 7 DLGORr'r'PNrGI 06 M83723 72w~~ DLGORV'V'PN 6V 7 7 DLsnR-'-*SN»6)06 M83723r73W"N DLBGRJV'SMS‘ v 7 DLSARV' wweme M83723774w'w mew ' *PN 5‘ t 7 DLeswr'r'sNreme M63723775W"N nLééwt'SN-m \ 7 DLSeR-‘-'PN-sws M83723~76W"N DLGSRw'PNrm 17 mum mm mwmmx \ mu )wmu DLEBGv'v‘SN-GIDE M83723-77W'W mesa-15MB! ‘ 7 DLGSR»UPN»5105 M8372343w‘w DLesG-Umre‘ ‘ 7 \sn| DLBOHr 'PN N/A N/A mew w N/A N/A DL64K~'-"PN N/A N/A nmmmum DLGIHJJPNVSSO N/A N/A msmmsmusm,J DLBISHJ-‘PNvSZB N/A N/A MIIIHry DEUTSCM Pan Number Pm Number (1255 (W) mush class (w) Flmsh DBAaor'r'SNrel 06 M837aarezwfin DEMO-"9+5! x 7 Dana-”W‘s! 06 M83723763W“N DBA30~*~‘PN-61 1 7 DBA34V'V‘SN76106 M83723—84W"N DBA34-'~‘SN-61 17 DBA34V'V'FN-6106 M83723-BSW”N DBA34-*-'PN»GI \ 7 DBA36-‘~'SN~6106 Mewzyasw'w DBAB ' 'SN-GI I7 DBASB-‘-‘PN-$V06 M83723~B7W"N DEAES‘V'PN»61 V7 DBCBOH-‘r'i’N N/A N/A DECZAHJ—‘PN N/A N/A DEC33H-‘-‘PN N/A N/A Military Part "2 R “ . m...” W...“ j Numbering W.MUMGUWWMA~ ....... 7 System (in mm. immun. Mme“: Mn unumw « mm H Ienmxir L’onduum’ I inni- R z Rnlhnuhrumllkmr r.. x. T," WWW. M...“ Sn me 5 lnwn Mummm s« mav q a n Shell m mo II‘NJmIR. :0 z
This information is for reference only. Consult factory for envelope
drawings, updated specifications, and additions to the product line.
mil83723_ser1_3 ©Copyright 2001 Deutsch ECD

Products related to this Datasheet

CONN RCPT FMALE 55POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSG FMALE 55POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT FMALE 55POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSG FMALE 55POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT FMALE 55POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSG FMALE 55POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT FMALE 55POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSG FMALE 55POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT MALE 19POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSNG MALE 19POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT MALE 19POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSNG MALE 19POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT MALE 19POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSNG MALE 19POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT MALE 19POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSNG MALE 19POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT MALE 19POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSNG MALE 19POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT MALE 19POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSNG MALE 19POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT MALE 19POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSNG MALE 19POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT MALE 19POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSNG MALE 19POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT MALE 19POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSNG MALE 19POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT MALE 19POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSNG MALE 19POS PNL MT
Available Quantity: 0
Unit Price: 0
CONN RCPT MALE 19POS GOLD CRIMP
Available Quantity: 0
Unit Price: 0
CONN RCPT HSNG MALE 19POS PNL MT
Available Quantity: 0
Unit Price: 0