SDP-B Getting Started Datasheet by Analog Devices Inc.

View All Related Products | Download PDF Datasheet
Your co 1 2 a a 5 Emmett suns» Eval M" lush” Mug M Applv “uwel Applma n Baardnnm mEval Software Applicauan Sahware 50% Board “7 PC “55
ANALOG DEVICES WORLD WIDE HEADQUARTERS
One Technology Way, P.O. Box 9106 Norwood, MA 02062-9106, U.S.A.
www.analog.com
www.analog.com/sdp processor.tools.support@analog.com processor.support@analog.com
Revision 2.1, May 2011
C
a
Getting Started with SDP-B Controller
Board and Evaluation Boards
Do not connect the SDP-B board to the PC prior to the completion of the steps outlined below.
Your component evaluation system requires the following:
For successful SDP-B and Evaluation board installation, follow these steps:
System Demonstration Platform
Controller Board (SDP-B) Package: Evaluation Package:
One EVAL-SDP-CB1Z board
One A to mini B USB cable
One EVAL-ADXXXXSDZ board
One CD-ROM with application software
Step 1: Install the application software provided as part of the component
evaluation package.
Step 2: Plug the evaluation board onto the SDP-B board.
Step 3: Power the evaluation board.
Step 4: Connect the evaluation and SDP-B boards to the PC using the USB
cable provided in the SDP-B board package.
Step 5: Start the application software.
NOTE

Products related to this Datasheet

BOARD EVALUATION FOR SDP-CB1
Available Quantity: 348
Unit Price: 148.16
BOARD EVAL FOR AD7988-5
Available Quantity: 1
Unit Price: 127.72