AF, AH Series, Chip Antennas Catalog

Taiyo Yuden

Download PDF Datasheet

Datasheet

Notice for TAIYO YUDEN Products
[ For General Electronic Equipment
(General Environment) ]
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
Product information in this catalog is as of October 2017. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment including,
without limitation, mobile phone, and PC) and medical equipment classified as Class I or II by IMDRF. Please be
sure to contact TAIYO YUDEN for further information before using the products for any equipment which may
directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
disaster prevention equipment, medical equipment classified as Class III by IMDRF, highly public information
network equipment including, without limitation, telephone exchange, and base station).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter TAIYO YUDENs official sales channel ). Please note that the contents of this
catalog are not applicable to our products purchased from any seller other than TAIYO YUDENs official sales
channel.
Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to U.S. Export
Administration Regulations , Foreign Exchange and Foreign Trade Control Law of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
chipantenna_e-E05R01
CHIP ANTENNAS
REFLOW
PARTS NUMBER
A F 2 1 6 M 2 4 5 0 0 1 - T △=Blank space
①Series name
Code Series name
AH Multilayer antenna
AF Helical antenna
②Electrode code
Code Electrode code
With plating
③Dimensions(case size)
Code Dimensions(case size)[mm]
212 2.0×1.25
216 2.5×1.6
316 3.2×1.6
083 8.0×3.0
104 10.0×4.0
086 8.0×6.0
④Special code
Code Special code
F Inverted F
M Mono pole
N Mono pole(Dual)
⑤Frequency
Code
(example) Frequency[MHz]
1575 1574.397~1576.443
2450 2400~2500
5550 3100~8000
1.Describe Center Frequency
2.Lower Frequency for Dual band
⑥Spec code
Code Spec code
01~
S1~ Applicable to AH 104F
⑦Packaging
Code Packaging
-T Taping
EXTERNAL DIMENSIONS / STANDARD QUANTITY
AH 212M type, AF 216M type AH 316M type AH 083F type
W
L
E
T
W
L
E
T
b
Direction mark
W
L
T
b
Direction mark
b
bb
cca
a
Feed mark
AH 104F type AH 104N type AH 086M type
W
L
T
b
Direction mark
b
bb
cca
a
Feed mark
W
L
T
b
Direction mark
b
bb
cca
a
Feed mark
b
W
L
T
a
a
Direction mark Feed mark
Type L W T E a b c Standard quantity[pcs]
Embossed tape
AF 216M 2.5±0.2 1.6±0.2 1.6±0.2 0.5±0.3 - - - 2000
AH 212M 2+0.3/-0.1 1.25±0.2 0.85±0.2 0.5±0.3 - - - 4000
AH 316M 3.2±0.15 1.6±0.15 0.5±0.1 0.5±0.2 - 1.0min. - 3000
AH 083F 8±0.3 3±0.3 1±0.3 - 3.1±0.3 1±0.3 1.15±0.3 1000
AH 104F 10±0.3 4±0.3 1±0.3 - 2.5±0.3 1±0.3 1±0.3 2000
AH 104N 10±0.3 4±0.3 1±0.3 - 3±0.3 0.8±0.3 1.5±0.3 2000
AH 086M 8±0.3 6±0.3 1±0.3 - 1.8±0.2 1±0.3 - 1000
Unit:mm
PARTS NUMBER
Applications Part number External dimensions(L×W×T)[mm] Center frequency[MHz]
GPS AH 316M157501 3.2×1.6×0.5 1575
AF 216M245001 2.5×1.6×1.6 2450
W-LAN(2.4GHz) AH 212M245001 2.0×1.25×0.85 2450
Bluetooth
® AH 316M245001 3.2×1.6×0.5 2450
WiMAX(2.5GHz) AH 083F245001 8.0×3.0×1.0 2450
ZigBee AH 104F2450S1 10.0×4.0×1.0 2450
AH 104F2650S1 10.0×4.0×1.0 2650
W-LAN(2.4GHz/5GHz) AH 104N2450D1 10.0×4.0×1.0 2450/5400
UWB & WiMAX(3.5GHz) AH 086M555003 8.0×6.0×1.0 5550
HIGH FREQUENCY PRODUCTS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
 Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
CHIP ANTENNAS
REFLOW
165
ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS
Typical characteristics on TAIYO YUDEN evaluation board
AH 316M157501
Typical characteristics of VSWR Typical characteristics of radiation pattern (@1.575GHz)
AF 216M245001
Typical characteristics of VSWR Typical characteristics of radiation pattern (@2.45GHz)
AH 212M245001
Typical characteristics of VSWR Typical characteristics of radiation pattern (@2.45GHz)
AH 316M245001
Typical characteristics of VSWR Typical characteristics of radiation pattern (@2.45GHz)
AH 083F245001
Typical characteristics of VSWR Typical characteristics of radiation pattern (@2.45GHz)
chipantenna_e-E05R01
HIGH FREQUENCY PRODUCTS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
 Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
166
ELECTRICAL CHARACTERISTICS / TYPICAL CHARACTERISTICS
Typical characteristics on TAIYO YUDEN evaluation board
AH 104F2450S1
Typical characteristics of VSWR Typical characteristics of radiation pattern (@2.45GHz)
AH 104N2450D1
Typical characteristics of VSWR(2GHz band) Typical characteristics of radiation pattern (@2.45GHz
Typical characteristics of VSWR(5GHz band) Typical characteristics of radiation pattern (@5.25GHz
AH 086M555003
Typical characteristics of VSWR Typical characteristics of radiation pattern (@3.96GHz)
chipantenna_e-E05R01
HIGH FREQUENCY PRODUCTS
Thiscatalogcontainsthetypicalspecificationonlyduetothelimitationofspace.Whenyouconsiderthepurchaseofourproducts,pleasecheckourproductspecificationsheets.
 Fordetailsofeachproduct(characteristicsgraph,reliabilityinformation,precautionsforuse,andsoon),seeourwebsite(http://www.ty-top.com/).
167
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipantenna_pack_e-E05R01
CHIP ANTENNAS
PACKAGING
①Minimum Quantity
Type Standard Quantity (pcs)
Embossed Tape
AF216M, AH104F, AH104N 2000
AH316M 3000
AH083F, AH086M 1000
AH212M 4000
②Tape Material
Embossed Tape
Top tape
Base tape
Sprocket hole
Chip cavity
Chip
Chip Filled
③Taping Dimensions
Embossed Tape
F
2.0±0.1
(0.079±0.004)
4.0±0.1
(0.157±0.004)
1.75±0.1
(0.069±0.004)
φ1.5+0.1/-0
(φ0.059+0.004/-0)
Sprocket hole
A
B
DC
Type Chip Cavity Tape Widthness Insertion Pitch Tape Thickness max.
A B C D F K T
AF216M 1.85±0.2
(0.073±0.008)
2.75±0.2
(0.108±0.008)
8±0.2
(0.315±0.008)
3.5±0.1
(0.138±0.004)
4±0.1
(0.157±0.004)
1.95
(0.077)
0.3
(0.012)
AH316M 1.9±0.2
(0.075±0.008)
3.5±0.2
(0.138±0.008)
8±0.2
(0.315±0.008)
3.5±0.1
(0.138±0.004)
4±0.1
(0.157±0.004)
0.85
(0.033)
0.3
(0.012)
AH083F 3.35±0.2
(0.132±0.008)
8.35±0.2
(0.329±0.008)
16±0.3
(0.630±0.012)
7.5±0.1
(0.295±0.004)
8±0.1
(0.315±0.004)
1.55
(0.061)
0.3
(0.012)
AH104F,
AH104N
4.35±0.2
(0.171±0.008)
10.35±0.2
(0.407±0.008)
24±0.3
(0.945±0.012)
11.5±0.1
(0.435±0.004)
8±0.1
(0.315±0.004)
1.55
(0.061)
0.3
(0.012)
AH086M 6.25±0.2
(0.246±0.008)
8.26±0.2
(0.325±0.008)
16±0.3
(0.630±0.012)
7.5±0.1
(0.296±0.004)
12±0.1
(0.473±0.004)
1.3
(0.051)
0.3
(0.012)
AH212M 1.5±0.2
(0.059±0.008)
2.3±0.2
(0.091±0.008)
8±0.3
(0.315±0.012)
3.5±0.1
(0.138±0.004)
4±0.1
(0.157±0.004)
1.5
(0.059)
0.3
(0.012)
Unit:mm (inch)
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipantenna_pack_e-E05R01
④Leader and Blank Portion
⑤Reel size
Type A B W T
AF216M, AH212M
AH316M
178±2.0
(7.0±0.08)
50 min.
(2.0 min.)
10.0±1.5
(0.394±0.06)
3.0 max.
(0.12 max.)
AH083F 178±2.0
(7.0±0.08)
50 min.
(2.0 min.)
17.0±1.0
(0.67±0.04)
2.5 max.
(0.1 max.)
AH104F
AH104N
330±2.0
(13.0±0.08)
100±1.0
(3.94±0.04)
25.5±1.0
(1.0±0.04)
3.0 max.
(0.12 max.)
AH086M 330±2.0
(13.0±0.08)
100±1.0
(3.94±0.04)
17.0±1.0
(0.67±0.04)
2.5 max.
(0.1 max.)
Unit:mm(inch)
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1~0.7N in the direction of the arrow as illustrated below.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipantenna_reli_e-E04R01
CHIP ANTENNAS
RELIABILITY DATA
1. Operating Temperature Range
Specified Value -40~+85℃
2. Storage Temperature Range
Specified Value -40~+85℃
Test Methods and
Remarks ※with being taped, -20~+40℃
3. Solderability
Specified Value At least 90% of immersed terminal surface is covered by new solder.
Test Methods and
Remarks
Solder temperature : 230±5℃
Duration : 3±1 sec.
Preconditioning : Preheating at 150℃ after immersion into flux.
4. Thermal Shock
Specified Value Shall satisfy required VSWR value of individual specifications for each item.
Test Methods and
Remarks
1 hour of recovery after 10 times of 30min.immersion alternately at -40℃ and 85℃ of temperature, followed by evaluating electrical
characteristics.
5. High Temperature Storage Test
Specified Value Shall satisfy required VSWR value of individual specifications for each item.
Test Methods and
Remarks
1 hour of recovery under standard condition after 96 hours recovery with 85℃ of temperature, followed by evaluating electrical
characteristics.
6. Low Temperature Storage Test
Specified Value Shall satisfy required VSWR value of individual specifications for each item.
Test Methods and
Remarks
1 hour of recovery under standard condition after 96 hours recovery with -40℃ of temperature, followed by evaluating electrical
characteristics.
7. Humidity Storage Test
Specified Value Shall satisfy required VSWR value of individual specifications for each item.
Test Methods and
Remarks
1 hour of recovery under standard condition after 96 hours recovery with 60℃ of temperature, 90~95% relative humidity followed by
evaluating electrical characteristics.
8. Resistance to Reflow
Specified Value Shall satisfy required VSWR value of individual specifications for each item.
Test Methods and
Remarks Two times of reflow soldering by recommended profile attached, followed by evaluating electrical characteristics.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipantenna_prec_e-E05R01
CHIP ANTENNAS
PRECAUTIONS
1. PCB Design
Precautions ◆Land pattern design
Please do not arrange the surface and inside layer pattern near the antenna mounting area.
Technical
Considerations
◆Land pattern design
Land pattern dimension examples and recommended antenna land pattern
AF216M AH316M
Type Dimensions
L P A
AF216M 2.5 1.5 3
AH212M 2 1 3
Unit:mm
AH083F AH104F
AH104N AH086M
2. Soldering
Technical
Considerations
◆Conditions of Reflow soldering (for reference)
Pb Free Reflow Profile Reflow profile
Peak
260℃ Max.
Within 10sec.
Slow
cooling
Heating above
230℃
40sec. Max.
300
200
100
0
Temperature(℃)
Preheating150℃
60sec. Min.
Components should be preheated to within 100
to 130℃ from soldering temperature.
Assured to be reflow soldering for 2 times.
Note : The above profiles are the maximum allowable
soldering condition, therefore these
profiles are not always recommended.
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipantenna_prec_e-E05R01
3. Storage Conditions
Precautions
◆Storage conditions
1. The Products should not be used in the following environments :
exposure to special gases such as (C12, NH3, SOx, NOx)
exposure to volatile gas or inflammable gas
exposure to a lot of dust
exposure to water or condensation
exposure to direct sunlight or freezing
2. The Products should be kept in the following conditions :
Temperature : -10~+40℃
Humidity : 70%RH max.
3. The products should be used within 6 months after delivery. In case of storage over 6 months, solderability shall be checked before
actual usage.
Please contact our offices for further details of specifications.
All of the standard values listed here are subject to change without notice due to technical improvements.
Therefore, please check the specifications carefully before use.

Products

RF ANT 2.4GHZ CHIP SOLDER SMD
Available Quantity10150
Unit Price1.95
RF ANT 3.5GHZ/5.6GHZ CHIP SLD
Available Quantity3486
Unit Price3.11
RF ANT 2.4GHZ/5.4GHZ CHIP SLD
Available Quantity6127
Unit Price3.31
RF ANT 2.4GHZ CHIP SOLDER SMD
Available Quantity3701
Unit Price3.31
RF ANT 2.4GHZ CHIP SOLDER SMD
Available Quantity4122
Unit Price1.95
RF ANT 2.4GHZ CHIP SOLDER SMD
Available Quantity2603
Unit Price2.18
RF ANT 1.575GHZ CHIP SOLDER SMD
Available Quantity2634
Unit Price2.34
RF ANT 2.4GHZ CHIP SOLDER SMD
Available Quantity1660
Unit Price3.11
RF ANT 2.6GHZ CHIP SOLDER SMD
Available Quantity1953
Unit Price3.31
RF ANT 2.6GHZ CHIP SOLDER SMD
Available Quantity0
Unit Price0
RF ANT 1.575GHZ CHIP SOLDER SMD
Available Quantity0
Unit Price0