Crystal Units/Oscillators Catalog

Murata Electronics North America

View All Related Products | Download PDF Datasheet

Datasheet

Crystal Units/Crystal Oscillators
P79E.pdf
Oct.1,2018
EU RoHS Compliant
• All the products in this catalog comply
with EU RoHS.
• EU RoHS is "the European Directive
2011/65/EU on the Restriction of the
Use of Certain Hazardous Substances in
Electrical and Electronic Equipment."
• For more details, please refer to our web
page, "Murata's Approach for EU RoHS"
(https://www.murata.com/en-eu/support/
compliance/rohs).
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
• All the products in this catalog comply
with EU RoHS.
• EU RoHS is "the European Directive
2011/65/EU on the Restriction of the
Use of Certain Hazardous Substances in
Electrical and Electronic Equipment."
• For more details, please refer to our web
page, "Murata's Approach for EU RoHS"
(https://www.murata.com/en-eu/support/
compliance/rohs).
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Bluetoothr is a registered trademark or trademark
of Bluetooth SIG, Inc. in the United States and
other countries.
Contents
Please check the MURATA website (https://www.murata.com/)
if you cannot find a part number in this catalog.
Product specifications are as of October 2018.
Selection Guide p2
Part Numbering p3
Measuring Circuit of Crystal Units p28
Crystal Units for Consumer and Industrial
Features, Applications p5
Appearance, Dimension p5
Series p6
Part Number List p6
Standard Land Pattern Dimensions p9
Notice p10
Packaging p14
Crystal Units for Automotive
Features, Applications p22
Appearance, Dimension p22
Series p22
Part Number List p23
Standard Land Pattern Dimensions p24
Notice p25
Packaging p27
Crystal Oscillators for Consumer and Industrial
Features, Applications p17
Appearance, Dimension p17
Series p17
Part Number List p17
Standard Land Pattern Dimensions p18
Notice p19
Packaging p21
1
3
2
1
2
3
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2
Selection Guide
±30/45ppm
HCR2016
Crystal Units
±100ppm
HCR2016
HCR2520
16.0000-20.0000MHz
2.5×2.0×0.8mm
XRCHA_F_L
24.0000-50.0000MHz
2.0×1.6×0.5mm
XRCPB_F_L
16.0000-50.0000MHz
2.0×1.6×0.7mm
XRCGB_F_L
±30/±50/±100ppm
HCR2016
HCR2520MCR1612
2.5×2.0×0.8mm
16.0000-24.0000MHz
XRCHA_F_A
24.0000-48.0000MHz
2.0×1.6×0.7mm
XRCGB_F_A
Crystal Units
±10ppm
MCR1210
TSS-5032A
10.0000-52.0000MHz
5.0×3.2×1.05mm
XRCLK
30.0000-48.0000MHz
1.6×1.2×0.33mm
XRCMD
24.0000-29.9999MHz
1.6×1.2×0.35mm
XRCFD
32.0000-52.0000MHz
1.2×1.0×0.3mm
XRCTD
Crystal Units Crystal Oscillators
24.0000-50.0000MHz
2.0×1.6×0.5mm
XRCPB_F_M
16.0000-50.0000MHz
2.0×1.6×0.7mm
XRCGB_F_M
±10ppm
HCR2016
24.0000-32.0000MHz
2.0×1.6×0.7mm
XRCGB_F_H
±20ppm
HCR2016
24.0000-32.0000MHz
2.0×1.6×0.5mm
XRCPB_F_P
16.0000-38.4000MHz
2.0×1.6×0.7mm
XRCGB_F_P
Consumer/Industrial Automotive
±30/±50/±100ppm
HCR2016
24.0000-48.0000MHz
2.0×1.6×0.7mm
XRCGB_F_G
Crystal Units
Car Multimedia
(Limited Applications)
Applications
±0.28ppm max.
TTS14VSH/TTS14VCH
10.0000-50.0000MHz
5.0×3.2×1.5mm
XTCLH_J
TAS-5032F
10.0000-52.0000MHz
5.0×3.2×1.0mm
XRCLH
o Part Numbering
1Product ID
2Lead Style
4Nominal Center Frequency
8Individual Specification
Crystal Unit
XR Crystal Unit
CSMD
Product ID
Code Lead Style
(Part Number)
6Frequency Tolerance
Expressed by six-digit alphanumeric. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M".
*1
Including Initial Torelance+Temperature Characteristics
00: Standard specification type.
0
1
2
3
4
5
A
X
Frequency Tolerance
Code
±100ppm
±10ppm
±20ppm
±30ppm
±45ppm
±50ppm
±25ppm
Total Frequency Tolerance*1
7Frequency Shift by Temperature
A
G
L
M
N
P
H/Q
Frequency Shift by Temperature
Code
±100ppm max. (Automotive Grade)
±50ppm (Car Multimedia Grade)
±50ppm min.
±40ppm
±25ppm or 30ppm
±20ppm
±10ppm to ±15ppm
**
Code
Two-digit alphanumerics express
Individual Specification.
5Overtone Order
F
K
Overtone Order
Code
Fundamental
Customized Fundamental
8
00
3
GB
2
C
4
24M000
9
R0
XR
1 7
L
6
0
5
F
9Packaging (Quantity and Plastic taping reel diameter are
expressed by one-digit number in "*")
3Size · Structure
TD
FD
MD
GB
PB
LH
LK
1210 (STD) Metal Sealing
1612 (STD) Metal Sealing
1612 (Low Profile) Metal Sealing
2016 (STD) Resin Sealing
2016 (Low Profile) Resin Sealing
5032 Metal Sealing
5032 Seam Sealing
Code Size · Structure
R*/E*/J*/P*
Packaging
Code
Plastic Taping
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
3
1Product ID
2Lead Style
4Nominal Center Frequency
8Individual Specification
Crystal Oscillator
XT
XN
VC-TCXO
TCXO
CSMD
Product ID
Code Lead Style
(Part Number)
6Frequency Tolerance
Expressed by six-digit alphanumeric. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M".
3Size · Structure
HH
JH
LH
2520 Metal Sealing
3225 Metal Sealing
5032 Metal Sealing
Code Size · Structure
J
Frequency Tolerance
Code
±1.0 to ±1.4ppm
7Frequency Shift by Temperature
E
J
Frequency Shift by Temperature
Code
±0.5ppm max.
Less than ±0.3ppm
**
Code
Two-digit alphanumerics express
Individual Specification.
5Output Wave
T
C
Output Wave
Code
Clipped Sign Wave
CMOS
8
A5
3
HH
2
C
4
19M200
9
P0
XN
17
E
6
J
5
T
9Packaging (Quantity and Plastic taping reel diameter are
expressed by one-digit number in "*")
E*/G*/P*
Packaging
Code
Plastic Taping
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
4
These crystal units feature a small package and highly
accurate frequency, based on Murata's excellent package
technology and high grade quartz crystal elements.
Features
1. This series is ideal for applications requiring high accuracy
crystal units, especially communication clocks such
as GPS, Wi-Fi, B.T. (Bluetoothr), BLE (Bluetoothr Low
Energy), SATA and USB3.0.
2. The crystal units are extremely small, contributing to a
reduction in the mounting area.
3. The series complies to RoHS directive, being lead-free
(phase 3).
Applications
1. Clock for GPS controller ICs:
smartphone, wearable equipment, module, etc.
2. Clock for Wi-Fi, B.T. and ACPU controller ICs:
smartphone, wearable device, module, etc.
3. Clock for BLE controller ICs:
wearable, fitness and healthcare devices, module, etc.
4. Storage devices with SATA interface:
HDD, SSD, Optical storage device, etc.
5. Clock for USB (Ultra-Speed and High-Speed) controller
ICs: Mobile phone, DVC, DSC, Portable audio,
PC peripheral, etc.
6. Clock for PC, visual equipment controller ICs
7. Audio equipment and musical instrument, etc.
8. Clock for PLC, Inverter, Servo Amp, Servo Motor, etc.
controller ICs
9. Clock for LCD, Programmable display and Visual
equipment controller ICs
10. Other applications for replacement of other crystal
units or oscillators.
(0.15)
(1)
(3)
(2)
Marking
Monthly Code
(in mm)
2.0±0.1
1.6±0.1
(0.1)
(0.1)(0.1)
(1.4)
(0.2)
0.5±0.1
0.45±0.05
0.9±0.1
1.3±0.1
0.25±0.1
0.25±0.1
0.5±0.1
(1.8)
(0.1)
(1) Crystal Terminal
(2) No Connect
(3) Crystal Terminal
1.6±0.1
1.08
1.2±0.1
0.68 0.35 max.
0.45±0.08
0.45±0.08
(1)
(4)
(2)
(3)
(1) Crystal Terminal
(2) No Connect
(3) Crystal Terminal
(4) GND
(in mm)
Marking
Monthly Code
(0.15)
(1)
(3)
(2)
Marking
Monthly Code
(in mm)
2.0±0.1
1.6±0.1
(0.1)
(0.1)(0.1)
(1.4)
(0.3)
0.5±0.1
0.65±0.05
0.9±0.1
1.3±0.1
0.25±0.1
0.25±0.1
0.5±0.1
(1.8)
(0.1)
(1) Crystal Terminal
(2) No Connect
(3) Crystal Terminal
Continued on the following page.
1.6±0.1
1.08
1.2±0.1
0.68 0.33 max.
0.45±0.08
0.45±0.08
(1)
(4)
(2)
(3)
(1) Crystal Terminal
(2) No Connect
(3) Crystal Terminal
(4) GND
(in mm)
Marking
Monthly Code
Crystal Units
for Consumer and Industrial
Lead
free
RoHS
1.2±0.1
0.63
1.0±0.1
0.60 0.30 max.
0.42
0.35
(1)
(4)
(2)
(3)
(1) Crystal Terminal
(2) GND
(3) Crystal Terminal
(4) No Connect
(in mm)
Marking
Monthly Code
XRCPB
(HCR2016)
24.0000–50.0000MHz
XRCTD
(MCR1210)
32.0000–52.0000MHz
XRCGB
(HCR2016)
16.0000–50.0000MHz
XRCFD
(MCR1612)
24.0000–29.9999MHz
XRCMD
(MCR1612)
30.0000–48.0000MHz
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
5
1
Marking
Monthly Code
(in mm)
2.5±0.1
2.0±0.1
(0.2)
(0.2)(0.2)
(1.9)
(0.3)
0.85±0.1
0.7±0.1
1.45±0.1
0.4±0.1
0.4±0.1
(2.4)
(0.2)
(in mm)
5.0±0.2
3.2±0.2
2.6±0.2
1.4±0.2
0.4±0.1
1.2±0.2
1.2±0.2
0.9±0.1
0.9±0.2
0.9±0.2
Marking
C0.5
(1)
(4)
(2)
(3)
Pin Connection
(1) (3): Crystal Terminal
(2) (4): Case GND
XRCLK
(TSS-5032A)
10.0000–52.0000MHz
Continued from the preceding page.
XRCHA_F_L
(HCR2520)
16.0000–20.0000MHz
Series Type Package Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
Drive
Level
(μW max.)
Operating
Temperature
Range (°C)
XRCTD MCR1210
Metal
32.0000 to 52.0000 ±20ppm (Total)
100
-30 to +85
XRCFD MCR1612 24.0000 to 29.9999
±10 ±10
±1 -20 to +70
XRCMD 30.0000 to 48.0000
XRCGB_F_H
HCR2016 Resin
24.0000 to 25.0000 ±2 300 -20 to +70
26.0000 to 32.0000 -30 to +85
XRCGB_F_P 16.0000 ±40 (Total)
±5 300*1
-30 to +85
24.0000 to 38.4000 ±20 ±20
XRCPB_F_P
XRCGB_F_M 16.0000 to 50.0000 ±30/±45 ±40
XRCPB_F_M 24.0000 to 50.0000
XRCGB_F_L 16.0000 to 50.0000 ±100 ±50
XRCPB_F_L 24.0000 to 50.0000
XRCHA_F_L HCR2520 16.0000 to 20.0000 ±100 ±100
XRCLK TSS-5032A Seam 10.0000 to 52.0000 ±10 ±15 ±3 60
XRCLH TAS-5032F Metal ±1 (±3/5Years)
XRCPB series is a low profile type of XRCGB series. *1 16MHz: 100µW max.
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
ESR*
(Ωmax.)
Load
Capacitance
(pF)
Drive
Level
(μW max.)
XRCTD37M400FXQ50R0 MCR1210 37.4000 ±20ppm (Total)(-30 to +85°C) 60 6 100
XRCFD26M000FYQ01R0 MCR1612 26.0000 ±20ppm (Total)(-30 to +85°C) 150 8 100
XRCMD32M000FXP50R0 MCR1612 32.0000 ±30ppm (Total)(-30 to +85°C) 100 6 100
XRCMD37M400F1Q01R0 MCR1612 37.4000 ±10 ±10(-20 to +70°C) ±1 60 8 100
XRCMD38M400FXQ56R0 MCR1612 38.4000 ±20ppm (Total)(-30 to +85°C) ±1 60 10 100
XRCMD40M000FXQ57R0 MCR1612 40.0000 ±20ppm (Total)(-30 to +85°C) ±1 60 10 100
XRCMD48M000FXQ58R0 MCR1612 48.0000 ±20ppm (Total)(-30 to +85°C) ±1 40 7 100
<XRCTD/XRCFD/XRCMD>
Part Number List
Series
* Equivalent Series Resistance
(in mm)
5.0+0.05
–0.2
3.2+0.05
–0.2
2-1.4
0.95±0.1
(1.025)
10-0.8
4-(R0.2)
C0.3
(1)
(4)
(2)
(3)
(4)
(1)
(3)
(2)
(5)
(7)
(6)
Index
Marking
3-2.6 4-(1.2)±0.2
10-(0.1)
3-0.15
9-1.1
Pin Connection
(1) (3): Crystal Terminal
(2) (4) (5) (6) (7): Case GND
XRCLH
(TAS-5032F)
10.0000–52.0000MHz
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
6
1
* Equivalent Series Resistance
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
ESR*
(Ωmax.)
Load
Capacitance
(pF)
Drive
Level
(μW max.)
XRCGB16M000FXN01R0 HCR2016 16.0000 ±40ppm (Total)(-30 to +85°C) ±5 200 8 100
XRCGB24M000F2P00R0 HCR2016 24.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300
XRCGB25M000F2P00R0 HCR2016 25.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300
XRCGB26M000F2P00R0 HCR2016 26.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300
XRCGB27M000F2P00R0 HCR2016 27.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300
XRCGB27M120F2P00R0 HCR2016 27.1200 ±20 ±20 (-30 to +85°C) ±5 150 6 300
XRCGB30M000F2P00R0 HCR2016 30.0000 ±20 ±20 (-30 to +85°C) ±5 100 6 300
XRCGB31M250F2P00R0 HCR2016 31.2500 ±20 ±20 (-30 to +85°C) ±5 100 6 300
XRCGB32M000F2P00R0 HCR2016 32.0000 ±20 ±20 (-30 to +85°C) ±5 100 6 300
XRCGB38M400F2P00R0 HCR2016 38.4000 ±20 ±20 (-30 to +85°C) ±5 100 6 300
XRCPB24M000F2P00R0 HCR2016 24.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300
XRCPB25M000F2P00R0 HCR2016 25.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300
XRCPB26M000F2P00R0 HCR2016 26.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300
XRCPB27M000F2P00R0 HCR2016 27.0000 ±20 ±20 (-30 to +85°C) ±5 150 6 300
XRCPB27M120F2P00R0 HCR2016 27.1200 ±20 ±20 (-30 to +85°C) ±5 150 6 300
XRCPB30M000F2P00R0 HCR2016 30.0000 ±20 ±20 (-30 to +85°C) ±5 100 6 300
XRCPB31M250F2P00R0 HCR2016 31.2500 ±20 ±20 (-30 to +85°C) ±5 100 6 300
XRCPB32M000F2P00R0 HCR2016 32.0000 ±20 ±20 (-30 to +85°C) ±5 100 6 300
<XRCGB_F_P/XRCPB_F_P>
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
ESR*
(Ωmax.)
Load
Capacitance
(pF)
Drive
Level
(μW max.)
XRCGB24M000F3M00R0 HCR2016 24.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300
XRCGB24M576F3M00R0 HCR2016 24.5760 ±30 ±40 (-30 to +85°C) ±5 150 6 300
XRCGB25M000F3M00R0 HCR2016 25.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300
XRCGB26M000F3M00R0 HCR2016 26.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300
XRCGB27M000F3M00R0 HCR2016 27.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300
XRCGB27M120F3M00R0 HCR2016 27.1200 ±30 ±40 (-30 to +85°C) ±5 150 6 300
XRCGB30M000F3M00R0 HCR2016 30.0000 ±30 ±40 (-30 to +85°C) ±5 100 6 300
XRCGB31M250F3M00R0 HCR2016 31.2500 ±30 ±40 (-30 to +85°C) ±5 100 6 300
XRCGB32M000F3M00R0 HCR2016 32.0000 ±30 ±40 (-30 to +85°C) ±5 100 6 300
XRCGB33M868F4M00R0 HCR2016 33.8688 ±45 ±40 (-30 to +85°C) ±5 100 6 300
XRCGB38M400F4M00R0 HCR2016 38.4000 ±45 ±40 (-30 to +85°C) ±5 100 6 300
XRCGB40M000F4M00R0 HCR2016 40.0000 ±45 ±40 (-30 to +85°C) ±5 100 6 300
XRCGB48M000F4M00R0 HCR2016 48.0000 ±45 ±40 (-30 to +85°C) ±5 100 6 300
XRCGB50M000F4M00R0 HCR2016 50.0000 ±45 ±40 (-30 to +85°C) ±5 65 6 300
XRCPB24M000F3M00R0 HCR2016 24.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300
XRCPB24M576F3M00R0 HCR2016 24.5760 ±30 ±40 (-30 to +85°C) ±5 150 6 300
XRCPB25M000F3M00R0 HCR2016 25.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300
XRCPB26M000F3M00R0 HCR2016 26.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300
XRCPB27M000F3M00R0 HCR2016 27.0000 ±30 ±40 (-30 to +85°C) ±5 150 6 300
XRCPB27M120F3M00R0 HCR2016 27.1200 ±30 ±40 (-30 to +85°C) ±5 150 6 300
XRCPB30M000F3M00R0 HCR2016 30.0000 ±30 ±40 (-30 to +85°C) ±5 100 6 300
XRCPB31M250F3M00R0 HCR2016 31.2500 ±30 ±40 (-30 to +85°C) ±5 100 6 300
<XRCGB_F_M/XRCPB_F_M>
* Equivalent Series Resistance
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
ESR*
(Ωmax.)
Load
Capacitance
(pF)
Drive
Level
(μW max.)
XRCGB24M000F1H00R0 HCR2016 24.0000 ±10 ±10 (-20 to +70°C) ±2 80 6 300
XRCGB25M000F1H00R0 HCR2016 25.0000 ±10 ±10 (-20 to +70°C) ±2 80 6 300
XRCGB26M000F1H00R0 HCR2016 26.0000 ±10 ±10 (-30 to +85°C) ±2 60 6 300
XRCGB32M000F1H00R0 HCR2016 32.0000 ±10 ±10 (-30 to +85°C) ±2 60 6 300
<XRCGB_F_H>
* Equivalent Series Resistance
Continued on the following page.
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
7
1
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
ESR*
(Ωmax.)
Load
Capacitance
(pF)
Drive
Level
(μW max.)
XRCGB24M000F0L00R0 HCR2016 24.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300
XRCGB24M576F0L00R0 HCR2016 24.5760 ±100 ±50 (-30 to +85°C) ±5 150 6 300
XRCGB25M000F0L00R0 HCR2016 25.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300
XRCGB26M000F0L00R0 HCR2016 26.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300
XRCGB27M000F0L00R0 HCR2016 27.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300
XRCGB27M120F0L00R0 HCR2016 27.1200 ±100 ±50 (-30 to +85°C) ±5 150 6 300
XRCGB30M000F0L00R0 HCR2016 30.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCGB31M250F0L00R0 HCR2016 31.2500 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCGB32M000F0L00R0 HCR2016 32.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCGB33M868F0L00R0 HCR2016 33.8688 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCGB38M400F0L00R0 HCR2016 38.4000 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCGB40M000F0L00R0 HCR2016 40.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCGB48M000F0L00R0 HCR2016 48.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCGB50M000F0L00R0 HCR2016 50.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCPB24M000F0L00R0 HCR2016 24.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300
XRCPB24M576F0L00R0 HCR2016 24.5760 ±100 ±50 (-30 to +85°C) ±5 150 6 300
XRCPB25M000F0L00R0 HCR2016 25.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300
XRCPB26M000F0L00R0 HCR2016 26.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300
XRCPB27M000F0L00R0 HCR2016 27.0000 ±100 ±50 (-30 to +85°C) ±5 150 6 300
XRCPB27M120F0L00R0 HCR2016 27.1200 ±100 ±50 (-30 to +85°C) ±5 150 6 300
XRCPB30M000F0L00R0 HCR2016 30.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCPB31M250F0L00R0 HCR2016 31.2500 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCPB32M000F0L00R0 HCR2016 32.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCPB33M868F0L00R0 HCR2016 33.8688 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCPB40M000F0L00R0 HCR2016 40.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCPB48M000F0L00R0 HCR2016 48.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300
XRCPB50M000F0L00R0 HCR2016 50.0000 ±100 ±50 (-30 to +85°C) ±5 100 6 300
* Equivalent Series Resistance
<XRCGB_F_L/XRCPB_F_L>
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
ESR*
(Ωmax.)
Load
Capacitance
(pF)
Drive
Level
(μW max.)
XRCHA16M000F0L01R0 HCR2520 16.0000 ±100 ±100 (-30 to +85°C) ±5 100 8 300
XRCHA20M000F0L01R0 HCR2520 20.0000 ±100 ±100 (-30 to +85°C) ±5 80 8 300
* Equivalent Series Resistance
<XRCHA_F_L>
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
ESR*
(Ωmax.)
Load
Capacitance
(pF)
Drive
Level
(μW max.)
XRCLK10M000F1QA8P0
TSS-5032A
10.0000 ±10 ±15 (-30 to +85°C) ±3 80 8 60
XRCLK12M000F1QA6P0
TSS-5032A
12.0000 ±10 ±15 (-30 to +85°C) ±3 60 8 60
XRCLK14M745F1QB6P0
TSS-5032A
14.7456 ±10 ±15 (-30 to +85°C) ±3 60 8 60
XRCLK16M000F1QA7P0
TSS-5032A
16.0000 ±10 ±15 (-30 to +85°C) ±3 60 8 60
XRCLK21M250F1QA8P0
TSS-5032A
21.2500 ±10 ±15 (-30 to +85°C) ±3 60 8 60
XRCLK52M000F1QA0P0
TSS-5032A
52.0000 ±10 ±15 (-30 to +85°C) ±3 60 8 60
* Equivalent Series Resistance
<XRCLK>
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
ESR*
(Ωmax.)
Load
Capacitance
(pF)
Drive
Level
(μW max.)
XRCPB32M000F3M00R0 HCR2016 32.0000 ±30 ±40 (-30 to +85°C) ±5 100 6 300
XRCPB33M868F4M00R0 HCR2016 33.8688 ±45 ±40 (-30 to +85°C) ±5 100 6 300
XRCPB40M000F4M00R0 HCR2016 40.0000 ±45 ±40 (-30 to +85°C) ±5 100 6 300
XRCPB48M000F4M00R0 HCR2016 48.0000 ±45 ±40 (-30 to +85°C) ±5 100 6 300
XRCPB50M000F4M00R0 HCR2016 50.0000 ±45 ±40 (-30 to +85°C) ±5 65 6 300
* Equivalent Series Resistance
Continued from the preceding page.
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
8
1
Standard Land Pattern Dimensions
(Recommended Land Pattern)
(in mm)
0.70
0.30
0.70
0.20
0.600.60
(Recommended Land Pattern)
(in mm)
0.75
0.60
0.75
0.30
0.700.70
(Recommended Land Pattern)
(in mm)
0.4
1.35
2.2
XRCTD
(MCR1210)
(Recommended Land Pattern)
(in mm)
0.495
0.21
0.495
0.25
0.400.40
XRCFD, XRCMD
(MCR1612)
XRCGB_F_H/P/M/L, XRCPB_F_P/M/L
(HCR2016)
XRCHA_F_L
(HCR2520)
XRCLK
(TSS-5032A)
(in mm)
2.4
3.9
1.5
1.2
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
ESR*
(Ωmax.)
Load
Capacitance
(pF)
Drive
Level
(μW max.)
XRCLH10M000F1QA4P0 TAS-5032F 10.0000 ±10 ±15 (-30 to +85°C) ±1 (±3/5Years) 60 8 60
XRCLH12M000F1QA0P0 TAS-5032F 12.0000 ±10 ±15 (-30 to +85°C) ±1 (±3/5Years) 60 8 60
XRCLH14M745F1QA0P0 TAS-5032F 14.7456 ±10 ±15 (-30 to +85°C) ±1 (±3/5Years) 40 8 60
XRCLH16M000F1QA2P0 TAS-5032F 16.0000 ±10 ±15 (-30 to +85°C) ±1 (±3/5Years) 40 8 60
XRCLH21M250F1QA0P0 TAS-5032F 21.2500 ±10 ±15 (-30 to +85°C) ±1 (±3/5Years) 40 8 60
XRCLH52M000F1QA1P0 TAS-5032F 52.0000 ±10 ±15 (-30 to +85°C) ±1 (±3/5Years) 40 8 60
<XRCLH>
* Equivalent Series Resistance
XRCLH
(TAS-5032F)
(in mm)
2.4
3.9
Avoid putting signal lines under the product except referenced land pattern.
1.5
1.2
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
9
1
Notice -Crystal Units for Consumer and Industrial-
Please mount components on a circuit board by the
reflow soldering.
Flux: Please use rosin based flux; but do not use water
soluble flux.
Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the
following condition.
Standard thickness of soldering paste: 0.10 to 0.15mm
1.1. Soldering Condition
Please keep the solder volume below the height of the
substrate. When exceeding the substrate, the damage of
sealing part between the metal cap and the substrate
may occur.
1.2. Optimum Solder Amount for Soldering
The component is recommended with placement
machines employing optical placement capabilities.
The component might be damaged by mechanical force
depending on placement machine and condition.
Make sure that you have evaluated by using placement
machines before going into mass production.
Do not use placement machines employing mechanical
positioning.
Please contact Murata for details beforehand.
2. Notice for Mounting
Reflow
Pre-heating
Condition
150 to 180°C
Heating 220°C min.
Peak Temperature 245°C min. 260°C max.
60 to 120 sec.
30 to 60 sec.
5 sec. max.
150
180
220
245
260
Gradual
Cooling
Peak
Pre-heating
(150 to 180°C)
Heating
(220°C min.)
60 to 120 sec. 30 to 60 sec.
Temperature (°C)
Notice (Soldering and Mounting)
<XRCTD, XRCFD, XRCMD Series>
Continued on the following page.
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
10
1
Notice -Crystal Units for Consumer and Industrial-
Notice (Storage and Operating Condition)
1. Product Storage Condition
Please store the products in room where the
temperature/humidity is stable. And avoid
such places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to + 40 degrees C
Humidity: 15 to 85% R.H.
2. Expire Date on Storage
Expiration date (shelf life) of the products is 6 months
after delivery under the conditions of an unopened
package. Please use the products within 6 months after
delivery. If you store the products for a long time (more
than 6 months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to the storage in a
chemical atmosphere.
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
places and/or dusty places.
(3) Please do not store the products in the places under
direct sunlight, heat and vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to storage under poor conditions.
(5) Please do not drop the products to avoid cracking
the crystal element.
Notice (Rating)
The component may be damaged if excess mechanical
stress is applied.
Notice (Handling)
1. Please confirm circuit the conditions on your set,
because irregular or stop oscillation may occur under
unmatched circuit conditions.
2. Be sure to provide an appropriate fail-safe
function on your product to prevent a second
damage that may be caused by the abnormal
function or the failure of our product.
3. Please do not use these products in the following
applications in transportation equipment:
vehicles, trains, ships, etc.
(example: engine control, brake control,
steering control, body control.)
Continued from the preceding page.
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
11
1
Notice -Crystal Units for Consumer and Industrial-
Please mount components on a circuit board by the
reflow soldering.
Flux: Please use rosin based flux; but do not use water
soluble flux.
Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the
following condition.
Standard thickness of soldering paste: 0.10 to 0.15mm
1.1. Soldering Condition
Please keep the solder volume below the height of the
substrate. When exceeding the substrate, the damage of
sealing part between the metal cap and the substrate
may occur.
1.2. Optimum Solder Amount for Soldering
The component cannot withstand washing.
2. Wash
The component is recommended with placement
machines employing optical placement capabilities.
The component might be damaged by mechanical force
depending on placement machine and condition.
Make sure that you have evaluated by using placement
machines before going into mass production.
Do not use placement machines employing mechanical
positioning.
Please contact Murata for details beforehand.
3. Notice for Mounting
(1) Reflow
Pre-heating
Condition
150 to 180°C
Heating 220°C min.
Peak Temperature 245°C min. 260°C max.
60 to 120 sec.
30 to 60 sec.
5 sec. max.
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or electrical characteristics may be damaged if
excessive thermal stress is applied. Please keep solder
away from the metal cap (Lid) portion.
(2) Soldering Iron
Pre-heating
Condition
150°C 60 sec.
Heating of the Soldering Iron 350°C max.
Watt
Shape of the Soldering Iron
Soldering Time
Solder
30W max.
ø3mm max.
5 sec. max.
Sn-3.0Ag-0.5Cu
150
180
220
245
260
Gradual
Cooling
Peak
Pre-heating
(150 to 180°C)
Heating
(220°C min.)
60 to 120 sec. 30 to 60 sec.
Temperature (°C)
Notice (Soldering and Mounting)
Continued on the following page.
<XRCGB_F_H/P/M/L, XRCPB_F_P/M/L, XRCHA_F_L, XRCLK, XRCLH Series>
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
12
1
Notice -Crystal Units for Consumer and Industrial-
Notice (Storage and Operating Condition)
1. Product Storage Condition
Please store the products in room where the
temperature/humidity is stable. And avoid
such places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to + 40 degrees C
Humidity: 15 to 85% R.H.
2. Expire Date on Storage
Expiration date (shelf life) of the products is 6 months
after delivery under the conditions of an unopened
package. Please use the products within 6 months after
delivery. If you store the products for a long time (more
than 6 months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to the storage in a
chemical atmosphere.
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
places and/or dusty places.
(3) Please do not store the products in the places under
direct sunlight, heat and vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to storage under poor conditions.
(5) Please do not drop the products to avoid cracking
the crystal element.
4. Other
Conformal coating or washing of the component is not
acceptable.
Please be sure to consult with our sales representative
or engineer prior to using the products.
Notice (Rating)
The component may be damaged if excess mechanical
stress is applied.
Notice (Handling)
1. Please confirm circuit the conditions on your set,
because irregular or stop oscillation may occur under
unmatched circuit conditions.
2. Be sure to provide an appropriate fail-safe
function on your product to prevent a second
damage that may be caused by the abnormal
function or the failure of our product.
3. Please do not use these products in the following
applications in transportation equipment:
vehicles, trains, ships, etc.
(example: engine control, brake control,
steering control, body control.)
Continued from the preceding page.
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
13
1
Packaging -Crystal Units for Consumer and Industrial-
Minimum Quantity/Dimensions of Reel
Plastic Tape ø180mm
3,000
(in mm)
0
–1.5
(ø180 )
Trailer
160 to 190
Empty
160 min.
450 to 560
Cover Film
Leader
Empty Components
ø13.0±0.2 2.0±0.5
13.0±1.0
+1.0
0
9.0
(pcs.)
Dimensions of Taping
4.0±0.1
2.0±0.1 ø1.5
+0.1
-
0.0
+0.3
-
0.1
1.75±0.1
3.5±0.1
8.0
1.5±0.1
ø0.5±0.1
4.0±0.1
1.3±0.1
(5.3)
1
4
2
3
10°
(in mm)
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(1.1 max.)
0.45±0.1
0.25±0.1
Cover Film
Direction of Feed
(5°)
XRCTD
(MCR1210)
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
14
1
Packaging -Crystal Units for Consumer and Industrial-
Minimum Quantity/Dimensions of Reel
Plastic Tape ø180mm Plastic Tape ø330mm
3,000 9,000
(in mm)
0
–1.5
(ø180 )
Trailer
160 to 190
Empty
160 min.
400 to 560
Cover Film
Leader
Empty Components
ø13.0±0.2 2.0±0.5
13.0±1.0
+1.0
0
9.0
(pcs.)
4.0±0.1
2.0±0.1 ø1.5
+0.1
–0.0
1.75±0.13.5±0.1
8.0±0.2
2.75±0.1
ø1.0±0.1
4.0±0.1
2.25±0.1
(5°)
(5.5)
10°
(in mm)
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(1.5 max.)
0.85±0.1
0.25±0.05
Cover Film
Direction of Feed
4.0±0.1
2.0±0.1 ø1.5
+0.1
–0.0
1.75±0.13.5±0.1
8.0±0.2
2.25±0.1
ø1.0±0.1
4.0±0.1
1.85±0.1
5° max.
0.25±0.1
(5.5)
10°
(in mm)
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(1.2 max.)
Cover Film
Direction of Feed
0.60±0.1
4.0±0.1
2.0±0.1 ø1.5
+0.1
–0.0
1.75±0.13.5±0.1
8.0±0.2
2.25±0.1
ø1.0±0.1
4.0±0.1
1.85±0.1
5° max.
0.25±0.1
(5.5)
10°
(in mm)
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(1.6 max.)
Cover Film
Direction of Feed
1.00±0.1
Dimensions of Taping
XRCHA_F_L
(HCR2520)
XRCPB_F_P/M/L
(HCR2016)
XRCGB_F_H/P/M/L
(HCR2016)
4.0±0.1
2.0±0.1 ø1.5
+0.1
–0.0
1.75±0.1
3.5±0.1
8.0±0.2
1.85±0.1
ø0.8±0.1
4.0±0.1
1.45±0.1
(3°)
(5.5)
1
4
2
3
10°
(in mm)
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(1.15 max.)
0.55±0.1
0.25±0.1
Cover Film
Direction of Feed
XRCFD, XRCMD
(MCR1612)
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
15
1
Packaging -Crystal Units for Consumer and Industrial-
Minimum Quantity/Dimensions of Reel
(in mm)
Trailer
500 min.
Empty
150 min. 250 min.
Cover Film
Leader
Empty Components
13±0.3
6±0.5
80±0.5
255±1
60
18.4 max.
13.5±1.0
2.0 R1.5
2.0
2.0±0.5
20
3-120°
2.0
R12.5 3-R1
R4.5
Plastic Tape ø255mm
3,000
(pcs.)
Drawing Out Direction
(in mm)
Note
1) Radius “R” not mentioned is 0.3 max.
2) The tolerance not mentioned is ±0.1.
ø1.5
+0.1
–0.0
1.4
ø1.5
+0.1
–0.0
2.0±0.05
4.0
10 pitches cumulative 40.0±0.1
8.0
1
2
4
3
3.7
1.75
5.5±0.05
5.5
12.0±0.3
0.3±0.05
5° max.
5° max.
Dimensions of Taping
XRCLK
(TSS-5032A)
Drawing Out Direction
(in mm)
Note
1) Radius “R” not mentioned is 0.3 max.
2) The tolerance not mentioned is ±0.1.
ø1.5
+0.1
–0.0
1.4
ø1.5
+0.1
–0.0
2.0±0.05
4.0
10 pitches cumulative 40.0±0.1
8.0
1
2
4
3
3.7
1.75
5.5±0.05
5.5
12.0±0.3
0.3±0.05
5° max.
5° max.
XRCLH
(TAS-5032F)
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
16
1
We offer a varied lineup of TCXO (Temperature compensated
crystal oscillator)/VC-TCXO (Voltage-controlled
temperature compensated crystal oscillator) based on
highly reliable crystal units, superior temperature
compensation and adjusting method fostered by
our long experience and expertise.
Features
1. Excellent frequency stability over temperature
2. Low profile
3. Low supply voltage
4. SMD type (Reflow soldering available)
5. The series complies to RoHS directive,
being lead-free (phase 3).
Applications
1. Business radios
2. GPS (GNSS) systems
3. Small cells
4. Wireless devices
(1)
(8) (7) (6)
(2) (3) (4)
(5)
1.5 max.
5.0±0.2
3.2±0.2
(1)
(8)
(4)(2) (3)
(7) (6) (5)
1.4 0.8
2.6 1.1
C0.5 1.2
0.4
(in mm)
Pin Connection
(1): Vc
(2): NC
(3): NC
(4): GND
(5): Clipped Sine Output
(6): NC
(7): NC
(8): Vcc
Marking
XTCLH_J
(TTS14VSH/TTS14VCH)
10.0000–50.0000MHz
Series Type Size Package Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
Operating
Temperature
Range (°C)
VC
Function
XTCLH_J TTS14VSH 5032 Metal 10.0000 to 50.0000 ±0.5 ±0.2 ±0.5 -40 to +85°C
TTS14VCH ±0.28
Crystal Oscillators
for Consumer and Industrial
Lead
free
RoHS
Series
Part Number List
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
Frequency
Controlled Range
(ppm)
Output
XTCLH19M200TJJC3P0 TTS14VSH
19.2000 ±0.5ppm max. (25±3°C) ±0.2(-40 to +85°C) ±0.5 ±3min. to ±6max. Clipped Sine Wave
XTCLH25M000TJJA5P0 TTS14VSH
25.0000 ±0.5ppm max. (25±3°C) ±0.2(-40 to +85°C) ±0.5 ±3min. to ±6max. Clipped Sine Wave
XTCLH26M000TJJA6P0 TTS14VSH
26.0000 ±0.5ppm max. (25±3°C) ±0.2(-40 to +85°C) ±0.5 ±3min. to ±6max. Clipped Sine Wave
XTCLH20M000CYJB6P0 TTS14VCH
20.0000 ±1.12ppm max. (25±2°C) ±0.28(-40 to +85°C) ±0.8 ±4.12min. to ±9max. CMOS
XTCLH40M000CYJC4P0 TTS14VCH
40.0000 ±1.12ppm max. (25±2°C) ±0.28(-40 to +85°C) ±0.8 ±4.12min. to ±9max. CMOS
XTCLH10M000CHJA1P0 TTS14VCH
10.0000 ±0.5ppm max. (25±3°C) ±0.28(-40 to +85°C) ±0.5 ±3min. to ±6max. CMOS
XTCLH20M000CHJA0P0 TTS14VCH
20.0000 ±0.5ppm max. (25±3°C) ±0.28(-40 to +85°C) ±0.5 ±3min. to ±6max. CMOS
XTCLH40M000CHJA0P0 TTS14VCH
40.0000 ±0.5ppm max. (25±3°C) ±0.28(-40 to +85°C) ±0.5 ±3min. to ±6max. CMOS
XTCLH50M000CHJA3P0 TTS14VCH
50.0000 ±0.5ppm max. (25±3°C) ±0.28(-40 to +85°C) ±0.5 ±3min. to ±6max. CMOS
<XTCLH_J>
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
17
2
Standard Land Pattern Dimensions
XTCLH_J (TTS14VSH/TTS14VCH)
(in mm)
C0.5
1.2
2.4
5.6
3.8
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
18
2
Notice -Crystal Oscillators for Consumer and Industrial-
Please mount components on a circuit board by the
reflow soldering.
Flux: Please use rosin based flux; but do not use water
soluble flux.
Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the
following condition.
Standard thickness of soldering paste: 0.10 to 0.15mm
1.1. Soldering Condition
Please keep the solder volume below the height of the
substrate. When exceeding the substrate, damage of
sealing part between the metal cap and the substrate
may occur.
1.2. Optimum Solder Amount for Soldering
The component cannot withstand washing.
2. Wash
The component is recommended with placement
machines employing optical placement capabilities.
The component might be damaged by mechanical force
depending on placement machine and condition.
Make sure that you have evaluated by using placement
machines before going into mass production.
Do not use placement machines employing mechanical
positioning.
Please contact Murata for details beforehand.
3. Notice for Mounting
(1) Reflow
Pre-heating
Condition
150 to 200°C
Heating 220°C min.
Peak Temperature 255°C min. 260°C max.
120 sec. max.
55 sec. max.
10 sec. max.
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or metal lid may be damaged if excessive
thermal stress is applied.
(2) Soldering Iron
Pre-heating
Condition
150°C 60 sec.
Heating of the Soldering Iron 350°C max.
Watt
Shape of the Soldering Iron
Soldering Time
Solder
30W max.
ø3mm max.
5 sec. max.
Sn-3.0Ag-0.5Cu
175
220
255
260
175°C±25°C
120sec. max.
Time (sec.)
10sec. max.
55sec. max.
Temperature (°C)
Notice (Soldering and Mounting)
Continued on the following page.
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
19
2
Notice -Crystal Oscillators for Consumer and Industrial-
Notice (Storage and Operating Condition)
1. Product Storage Condition
Please store the products in a room where the
temperature/humidity is stable. And avoid
such places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to + 40 degrees C
Humidity: 15 to 85% R.H.
2. Expire Date on Storage
Expiration date (shelf life) of the products is 6 months
after delivery under the conditions of an unopened
package. Please use the products within 6 months after
delivery. If you store the products for a long time (more
than 6 months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage in a chemical
atmosphere.
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
places and/or dusty places.
(3) Please do not store the products in the places under
direct sunlight, heat and vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to storage under poor conditions.
(5) Please do not drop the products to avoid cracking
the crystal element.
4. Other
Conformal coating or washing of the component is not
acceptable.
Please be sure to consult with our sales representative
or engineer whenever and prior to using the products.
Notice (Rating)
The component may be damaged if excess mechanical
stress is applied.
Notice (Handling)
1. Be sure to provide an appropriate fail-safe
function on your product to prevent a second
damage that may be caused by the abnormal
function or the failure of our product.
2. Please do not use these products in the following
applications in transportation equipment
(vehicles, trains, ships, etc.).
(example: engine control, brake control,
steering control, body control.)
Continued from the preceding page.
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
20
2
Packaging -Crystal Oscillators for Consumer and Industrial-
Minimum Quantity/Dimensions of Reel
(in mm)
Plastic Tape ø255mm
2,000
(pcs.)
Trailer
500 min.
Empty
150 min. 250 min.
Cover Film
Leader
Empty Components
ø254±2.0
Reel Label
ø100±1.0
17.5±1.0
13.5±1.0
2.0±0.5 ø21±0.8
ø13±0.2
Drawing Out Direction
(in mm)
ø1.5
+0.1
–0.0
1.7±0.1
ø1.5
+0.1
–0.0
2.0±0.05
8.0±0.1
1.75±0.1
5.5±0.05
5.5±0.1
12.0±0.3
0.3±0.05
4.0±0.1
5° max.
5° max. Material: Black Conductive PS
Note
1) Cumulative tolerance of 10 pitches
of the sprocket hole is 40.0±0.2mm.
3.7±0.1
R0.3 max.
R0.3 max.
Dimensions of Taping
XTCLH_J (TTS14VSH/TTS14VCH)
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
21
2
These crystal units for automotive feature a small package
and highly accurate frequency, based on Murata's excellent
package technology and high grade quartz crystal elements.
Features
1. The series has high reliability and is available for a wide
temperature range.
2. The crystal units are extremely small, contributing to a
reduction in the mounting area.
3. The series complies to RoHS and ELV directives,
being lead-free (phase 3).
4. The series complies to AEC-Q200.
Applications
1. Power Train (ex. Engine/Transmission management ECU)
2. ADAS (ex. Camera for driver assist, Image processing,
Emergency Brake Assist ECU)
3. Chassis, Safety applications, etc.
4. Car multimedia equipment.
Marking
Monthly Code
(in mm)
2.5±0.1
2.0±0.1
(0.2)
(0.2)(0.2)
(1.9)
(0.3)
0.85±0.1
0.7±0.1
1.45±0.1
0.4±0.1
0.4±0.1
(2.4)
(0.2)
Marking
Monthly Code
(in mm)
2.0±0.1
(1.8)
0.9±0.1 0.65±0.05
(0.2)(0.2)
(0.2)
(1)
(4)
(2)
(3)
(0.2)
(1.4)
1.6±0.1
0.5±0.1
0.5±0.1
1.3±0.1
(0.3)
(0.15)
(1) (3): Crystal Terminal
(2) (4): No Connect
XRCHA_F_A
(HCR2520)
16.0000–24.0000MHz
XRCGB_F_A
(HCR2016)
24.0000–48.0000MHz
Series Type Package Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
Operating
Temperature
Range (°C)
Applications
XRCHA_F_A HCR2520
Resin
16.0000 to 24.0000 ±100 ±100 ±5 -40 to +125*
ADAS,
Power Train,
Chassis, Safety
XRCGB_F_A
HCR2016 24.0000 to 48.0000
±30/±50 ±35/±65 ±2 -40 to +125
ADAS,
Power Train,
Chassis, Safety
XRCGB_F_G ±30/±45/±100 ±50 ±5 -40 to +85 Car Multimedia
* +150°C is available.
(0.15)
(1)
(3)
(2)
Marking
Monthly Code
(in mm)
2.0±0.1
1.6±0.1
(0.1)
(0.1)(0.1)
(1.4)
(0.3)
0.5±0.1
0.65±0.05
0.9±0.1
1.3±0.1
0.25±0.1
0.25±0.1
0.5±0.1
(1.8)
(0.1)
(1) Crystal Terminal
(2) No Connect
(3) Crystal Terminal
XRCGB_F_G
(HCR2016)
24.0000–48.0000MHz
Crystal Units
for Automotive
Lead
free
RoHS
AEC-
Q200
Series
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
22
3
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
ESR*
(Ωmax.)
Load
Capacitance
(pF)
Drive
Level
(μW max.)
XRCHA16M000F0A01R0 HCR2520 16.0000 ±100 ±100 (-40 to +125°C) ±5 100 8 300
XRCHA16M000F0A11R0 HCR2520 16.0000 ±100 ±100 (-40 to +125°C) ±5 100 8 600
XRCHA16M000F0A12R0 HCR2520 16.0000 ±100 ±100 (-40 to +150°C) ±5 100 8 300
XRCHA16M000F0A13R0 HCR2520 16.0000 ±100 ±100 (-40 to +150°C) ±5 100 8 600
XRCHA20M000F0A01R0 HCR2520 20.0000 ±100 ±100 (-40 to +125°C) ±5 80 8 300
XRCHA20M000F0A11R0 HCR2520 20.0000 ±100 ±100 (-40 to +125°C) ±5 80 8 600
XRCHA20M000F0A12R0 HCR2520 20.0000 ±100 ±100 (-40 to +150°C) ±5 80 8 300
XRCHA20M000F0A13R0 HCR2520 20.0000 ±100 ±100 (-40 to +150°C) ±5 80 8 600
XRCHA24M000F0A01R0 HCR2520 24.0000 ±100 ±100 (-40 to +125°C) ±5 80 8 300
XRCHA24M000F0A11R0 HCR2520 24.0000 ±100 ±100 (-40 to +125°C) ±5 80 8 600
XRCHA24M000F0A12R0 HCR2520 24.0000 ±100 ±100 (-40 to +150°C) ±5 80 8 300
XRCHA24M000F0A13R0 HCR2520 24.0000 ±100 ±100 (-40 to +150°C) ±5 80 8 600
* Equivalent Series Resistance
* Equivalent Series Resistance
* Equivalent Series Resistance
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
ESR*
(Ωmax.)
Load
Capacitance
(pF)
Drive
Level
(μW max.)
XRCGB24M000F0G00R0 HCR2016 24.0000 ±100 ±50 (-40 to +85°C) ±5 150 6 300
XRCGB24M000F3G00R0 HCR2016 24.0000 ±30 ±50 (-40 to +85°C) ±5 150 6 300
XRCGB24M576F0G00R0 HCR2016 24.5760 ±100 ±50 (-40 to +85°C) ±5 150 6 300
XRCGB24M576F3G00R0 HCR2016 24.5760 ±30 ±50 (-40 to +85°C) ±5 150 6 300
XRCGB25M000F0G00R0 HCR2016 25.0000 ±100 ±50 (-40 to +85°C) ±5 150 6 300
XRCGB25M000F3G00R0 HCR2016 25.0000 ±30 ±50 (-40 to +85°C) ±5 150 6 300
XRCGB26M000F0G00R0 HCR2016 26.0000 ±100 ±50 (-40 to +85°C) ±5 150 6 300
XRCGB26M000F3G00R0 HCR2016 26.0000 ±30 ±50 (-40 to +85°C) ±5 150 6 300
XRCGB27M000F0G00R0 HCR2016 27.0000 ±100 ±50 (-40 to +85°C) ±5 150 6 300
XRCGB27M000F3G00R0 HCR2016 27.0000 ±30 ±50 (-40 to +85°C) ±5 150 6 300
XRCGB27M120F3G00R0 HCR2016 27.1200 ±30 ±50 (-40 to +85°C) ±5 150 6 300
XRCGB30M000F0G00R0 HCR2016 30.0000 ±100 ±50 (-40 to +85°C) ±5 100 6 300
XRCGB30M000F3G00R0 HCR2016 30.0000 ±30 ±50 (-40 to +85°C) ±5 100 6 300
XRCGB33M868F0G00R0 HCR2016 33.8688 ±100 ±50 (-40 to +85°C) ±5 100 6 300
XRCGB33M868F4G00R0 HCR2016 33.8688 ±45 ±50 (-40 to +85°C) ±5 100 6 300
XRCGB40M000F0G00R0 HCR2016 40.0000 ±100 ±50 (-40 to +85°C) ±5 100 6 300
XRCGB40M000F4G00R0 HCR2016 40.0000 ±45 ±50 (-40 to +85°C) ±5 100 6 300
XRCGB48M000F0G00R0 HCR2016 48.0000 ±100 ±50 (-40 to +85°C) ±5 100 6 300
XRCGB48M000F4G00R0 HCR2016 48.0000 ±45 ±50 (-40 to +85°C) ±5 100 6 300
<XRCGB_F_G (For Car Multimedia)>
<XRCHA_F_A (For Automotive)>
Part Number List
Part Number Type Frequency
(MHz)
Frequency Tolerance
(ppm max.)
[at 25°C±3°C]
Frequency Shift
by Temperature (ppm max.)
[Standard Condition: +25°C]
Frequency
Aging
(ppm max./Year)
ESR*
(Ωmax.)
Load
Capacitance
(pF)
Drive
Level
(μW max.)
XRCGB24M000F3A00R0 HCR2016 24.0000 ±30 ±35 (-40 to +125°C) ±2 120 6 300
XRCGB25M000F3A00R0 HCR2016 25.0000 ±30 ±35 (-40 to +125°C) ±2 100 6 300
XRCGB26M000F3A00R0 HCR2016 26.0000 ±30 ±35 (-40 to +125°C) ±2 80 6 300
XRCGB27M000F3A00R0 HCR2016 27.0000 ±30 ±35 (-40 to +125°C) ±2 80 6 300
XRCGB27M120F3A00R0 HCR2016 27.1200 ±30 ±35 (-40 to +125°C) ±2 80 6 300
XRCGB30M000F5A00R0 HCR2016 30.0000 ±50 ±65 (-40 to +125°C) ±2 70 6 300
XRCGB40M000F5A00R0 HCR2016 40.0000 ±50 ±65 (-40 to +125°C) ±2 70 6 300
XRCGB48M000F5A00R0 HCR2016 48.0000 ±50 ±65 (-40 to +125°C) ±2 60 6 300
<XRCGB_F_A (For Automotive)>
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
23
3
Standard Land Pattern Dimensions
XRCHA_F_A
(HCR2520)
XRCGB_F_A/G
(HCR2016)
(Recommended Land Pattern)
(in mm)
0.4
1.35
2.2
(Recommended Land Pattern)
(in mm)
0.75
0.60
0.75
0.30
0.700.70
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
24
3
Notice -Crystal Units for Automotive-
Please mount components on a circuit board by the
reflow soldering.
Flux: Please use rosin based flux; but do not use water
soluble flux.
Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the
following condition.
Standard thickness of soldering paste: 0.10 to 0.15mm
1.1. Soldering Condition
Please keep the solder volume below the height of the
substrate. When exceeding the substrate, damage of
sealing part between the metal cap and the substrate
may occur.
1.2. Optimum Solder Amount for Soldering
The component cannot withstand washing.
2. Wash
The component is recommended with placement
machines employing optical placement capabilities.
The component might be damaged by mechanical force
depending on placement machine and condition.
Make sure that you have evaluated by using placement
machines before going into mass production.
Do not use placement machines employing mechanical
positioning.
Please contact Murata for details beforehand.
3. Notice for Mounting
(1) Reflow
Pre-heating
Condition
150 to 180°C
Heating 220°C min.
Peak Temperature 245°C min. 260°C max.
60 to 120 sec.
30 to 60 sec.
5 sec. max.
(2) Soldering Iron
Pre-heating
Condition
150°C 60 sec.
Heating of the Soldering Iron 350°C max.
Watt
Shape of the Soldering Iron
Soldering Time
Solder
30W max.
ø3mm max.
5 sec. max.
Sn-3.0Ag-0.5Cu
150
180
220
245
260
Gradual
Cooling
Peak
Pre-heating
(150 to 180°C)
Heating
(220°C min.)
60 to 120 sec. 30 to 60 sec.
Temperature (°C)
Notice (Soldering and Mounting)
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or electrical characteristics may be damaged if
excessive thermal stress is applied.
Continued on the following page.
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
25
3
Notice -Crystal Units for Automotive-
Notice (Storage and Operating Condition)
1. Product Storage Condition
Please store the products in room where the
temperature/humidity is stable. And avoid
such places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to + 40 degrees C
Humidity: 15 to 85% R.H.
2. Expire Date on Storage
Expiration date (shelf life) of the products is 6 months
after delivery under the conditions of an unopened
package. Please use the products within 6 months after
delivery. If you store the products for a long time (more
than 6 months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to the storage in a
chemical atmosphere.
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
places and/or dusty places.
(3) Please do not store the products in the places under
direct sunlight, heat and vibration.
(4) Please use the products immediately after the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
the crystal element.
4. Other
Conformal coating or washing of the component is not
acceptable because it is not hermetically sealed.
Please be sure to consult with our sales representative
or engineer whenever and prior to using the products.
Notice (Rating)
The component may be damaged if excess mechanical
stress is applied.
Notice (Handling)
1. Irregular or stopped oscillation may occur under
unmatched circuit conditions.
Please design your oscillation circuit to get 5
times or more of a negative resistance against
the maximum value of the Equivalent Series
Resistance, that is specified in order.
2. Be sure to provide an appropriate fail-safe
function on your product to prevent a second
damage that may be caused by the abnormal
function or the failure of our product.
Continued from the preceding page.
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
26
3
Packaging -Crystal Units for Automotive-
Minimum Quantity/Dimensions of Reel
Plastic Tape ø180mm Plastic Tape ø330mm
3,000 9,000
(in mm)
0
–1.5
(ø180 )
Trailer
160 to 190
Empty
160 min.
400 to 560
Cover Film
Leader
Empty Components
ø13.0±0.2 2.0±0.5
13.0±1.0
+1.0
0
9.0
(pcs.)
4.0±0.1
2.0±0.1 ø1.5
+0.1
–0.0
1.75±0.13.5±0.1
8.0±0.2
2.75±0.1
ø1.0±0.1
4.0±0.1
2.25±0.1
(5°)
(5.5)
10°
(in mm)
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(1.5 max.)
0.85±0.1
0.25±0.05
Cover Film
Direction of Feed
4.0±0.1
2.0±0.1 ø1.5
+0.1
–0.0
1.75±0.13.5±0.1
8.0±0.2
2.25±0.1
ø1.0±0.1
4.0±0.1
1.85±0.1
5° max.
0.25±0.1
(5.5)
10°
(in mm)
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
(1.6 max.)
Cover Film
Direction of Feed
1.00±0.1
Dimensions of Taping
XRCHA_F_A
(HCR2520)
XRCGB_F_A/G
(HCR2016)
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
27
2
Measuring Circuit of Crystal Units
The load resonance frequency (Lower frequency of the
two given when the electrical impedance of the
component becomes resistant near its resonance point)
is measured by network analyzer (KEYSIGHT E5100A or
the equivalent) and the circuit in Figure 1. DUT is shown
in Figure 2, and the value of Cs refers to the load
capacitance value in specifications.
1. Frequency Measuring Method
The equivalent series resistance (ESR) is measured by
network analyzer (KEYSIGHT E5100A or equivalent) and
the circuit in Figure 1. DUT is shown in Figure 3.
2. Equivalent Series Resistance
Standard conditions for measurement shall be +25±3°C
temperature and humidity of 45 to 85%R.H.
3. Measuring Condition
Measuring Circuit
Cs
L1 ESRC1
Co
Network Analyzer
DUT
OUT1 OUT2
66.2Ω 66.2Ω
159Ω 159Ω14.2Ω 14.2Ω
RA
Figure 1 Frequency Measuring Circuit
Figure 2 DUT (Device Under Test)
Figure 3 DUT (Device Under Test)
P79E.pdf
Oct.1,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
28
Murata Manufacturing Co., Ltd.
www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specifi ed by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1 Aircraft equipment
2 Aerospace equipment
3 Undersea equipment
4 Power plant equipment
5 Medical equipment
6 Transportation equipment (vehicles, trains,
ships, etc.)
7 Traffi c signal equipment
8 Disaster prevention / crime prevention
equipment
9 Data-processing equipment
10 Application of similar complexity and/or
reliability requirements to the applications
listed above
3 Product specifi cations in this catalog are as of
October 2018. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifi cations.
Therefore, please approve our product
specifi cations or transact the approval sheet
for product specifi cations before ordering.
6 Please note that unless otherwise specifi ed, we
shall assume no responsibility whatsoever for any
confl ict or dispute that may occur in connection
with the eff ect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the eff ect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Global Locations
For details please visit www.murata.com
Cat. No. P79E-11
P79E.pdf
Oct.1,2018

Products

CRYSTAL 24.0000MHZ 6PF SMD
Available Quantity0
Unit Price0.23779
CRYSTAL 40.0000MHZ 6PF SMD
Available Quantity0
Unit Price0.24413
CRYSTAL 24.0000MHZ 6PF SMD
Available Quantity1413
Unit Price0.63
CRYSTAL 24.0000MHZ 6PF SMD
Available Quantity13
Unit Price0.63
CRYSTAL 38.4000MHZ 10PF SMD
Available Quantity0
Unit Price0.59175
CRYSTAL 24.5760MHZ 6PF SMD
Available Quantity0
Unit Price0.23652
CRYSTAL 30.0000MHZ 6PF SMD
Available Quantity34
Unit Price0.86
CRYSTAL 26.0000MHZ 6PF SMD
Available Quantity3898
Unit Price0.48
XTAL OSC TCXO 40.0000MHZ CMOS
Available Quantity0
Unit Price0
CRYSTAL 32.0000MHZ 6PF SMD
Available Quantity12539
Unit Price0.96
CRYSTAL 25.0000MHZ 6PF SMD
Available Quantity0
Unit Price0.22681
CRYSTAL 31.2500MHZ 6PF SMD
Available Quantity1141
Unit Price0.56
CRYSTAL 24.0000MHZ 6PF SMD
Available Quantity0
Unit Price0.55
CRYSTAL
Available Quantity3000
Unit Price0.94
CRYSTAL
Available Quantity0
Unit Price0.6408
CRYSTAL 24.0000MHZ 6PF SMD
Available Quantity0
Unit Price0.24413
CRYSTAL 32.0000MHZ 6PF SMD
Available Quantity0
Unit Price0.22702
CRYSTAL 48.0000MHZ 7PF SMD
Available Quantity8407
Unit Price1.07
CRYSTAL 26.0000MHZ 6PF SMD
Available Quantity0
Unit Price0.22681
CRYSTAL 27.0000MHZ 12PF SMD
Available Quantity0
Unit Price0.46