CAD | USD

Coaxial Cable Connectors Datasheet

Murata Electronics North America

Download PDF Datasheet

Datasheet

Cat.No.O30E-8
Murata
Manufacturing Co., Ltd.
Microwave Coaxial
Connectors
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
for EU RoHS Compliant
All the products on this catalog are complied with EU RoHS.
EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment".
For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
1
2
3
4
5
Part Numbering 2
Microwave Coaxial Connectors with Switch SWF Type 3
Notice 5
Package 8
Microwave Coaxial Connectors with Switch SWD Type 9
Notice 11
Package 14
Ultra Miniature SMT HSC Type 15
Notice 18
Package 21
Miniature SMT GSC Type 22
Notice 25
Package 28
SMT FSC Type 29
Notice 32
Package 35
Miniaturized Microwave Coaxial Connector Cable List 36
1
2
3
4
5
CONTENTS
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
oPart Numbering
(Part Number)
qProduct ID
wSeries
Coaxial Connectors (Chip Type Receptacle)
MM Microwave Coaxial Connectors
(Chip Type Receptacle)
Product ID
FSC, SWD, GSC Type 1000pcs. /Reel (ø178mm)
HSC Type, 4000pcs. /Reel (ø178mm)
HSC Type, 10000pcs. /Reel (ø330mm)
SWD Type, 3000pcs. /Reel (ø330mm)
FSC Type, 4000pcs. /Reel (ø330mm)
GSC Type, 5000pcs. /Reel (ø330mm)
SWF Type, 8000pcs. /Reel (ø330mm)
yPackage Detail
A1
A4
B0
B3
B4
B5
B8
Code Package Detail
Bulk
Reel
tPackage Product ID
B
R
Code Package Product ID
HSC Type
FSC Type
SWF Type
SWD Type
GSC Type
4829
7329
8130
8430
9329
Code Series
eIndividual Specification Code (1)
Switch Connector SMD Type
Connector SMD Type
-26
-27
Code Individual Specification Code (1)
rIndividual Specification Code (2)
Serial
00
Code Individual Specification Code (2)
(Part Number)
qProduct ID
wConnector (1)
Coaxial Connectors (with Cable)
MX
Product ID
FSC Type for 76 Cable
FSC Type for 81 Cable
HSC Type
GSC Type
Coaxial Connectors (with Cable)
FG
FK
HP
TK
Code Connector (1)
eCable
0.4D, PFA, Single Shield Line, Spiral
0.8D, FEP, Single Shield Line
0.4D, FEP, Single Shield Line
0.4D, PFA, Single Shield Line, Single Line
0.4D, PFA, Single Shield Line, Spiral
32
76
81
88
92
Code Cable
rConnector (2)
FSC Type for 76 Cable
FSC Type for 81 Cable
HSC Type
GSC Type
None Connector
FG
FK
HP
TK
XX
Code Connector (2)
tLength
yIndividual Specification Code
Expressed by two sign.
y
A1
e
-27
w
7329
r
00
t
R
q
MM
e
76
w
FG
rtyq
MX
Expressed by four figures. The unit is mm. From first to third
figures are significant, and the fourth figure expresses the number
of zeros which follow the three figures.
5000
1001
Ex.)
500mm = 500 x 100
1000mm = 100 x 101
Code Length
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Microwave Coaxial Connectors
Microwave Coaxial Connectors with Switch SWF Type
Features
1. The coaxial connector with switch is very useful
for characteristic measurement Cellular phone
and microwave circuit.
2. It is possible to switch the line connection and
disconnection easily by special probe.
3. Small size, low profile, size 2.5x2.5x1.4mm (LxWxH)
4. Excellent characteristics, low IL 0.2dB max.
V.S.W.R. 1.3 max. Isolation 15dB min. (DC to
6GHz)
5. Surface mountable and reflow solderable
6. Tape package available
Applications
Cellular phone, W-LAN, Other wireless and measurement
equipment
C Terminal
Side R Terminal
Side
2.5±0.2
Dia. 2.1±0.2
1.4±0.1
0.8±0.2
2.5±0.2
IN
OUT
GROUND
(in mm)
MM8130-2600
Part Number Rated
Voltage
(Vrms)
Contact
Resistance
(max.) (ohm)
Withstand
Voltage
(Vrms)
Insulation
Resistance
(M ohm)
Durability
(cycles) Frequency
Rating
Temperature
Range
(degree C) VSWR Insertion
Loss (On)
(dB)
Isolation (Off)
(dB) Inner
Electrode (C)
Inner
Electrode (R)
(material)
Outer
Electrode
(material)
MM8130-2600
250 0.07 300 (AC) 500 100 to 6GHz -40 to +85 1.2 max.
(DC to 3GHz) 0.1 max.
(DC to 3GHz) 20 min.
(DC to 3GHz) Stainless Steel
Gold plated Stainless Steel
Gold plated Copper Alloy
Gold plated
Impedance: 50ohm
Measurement Probe Dimensions
MM126036
2-Dia. 2.6±0.15
Dia. 19.68±0.2
Dia. 10±0.2
16±0.15
9±0.2
11.85±0.2 21.65±0.3
(13.35)
(4.02)
Dia. 5.4±0.1
Dia. 7±0.1
Dia. 3.8±0.1
(33.5)
(in mm)
SMA-J
MXHS83QE3000
300±4
(32)
(7.1) (26)
3.1±0.1
9±0.2
15.2±0.2
Dia. 3.2±0.1
Dia. 4.3±0.1
Dia. 5.8±0.2
SMA-J
0.8D Cable
(in mm)
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
1
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Measurement Probe Dimensions
MXHS83QH3000
300±4
(32) (26)
3.1±0.1
13.9±0.2
12±0.2
20.1±0.2
Dia. 3.4±0.1
Dia. 3.2±0.1
Dia. 4.3±0.1
Dia. 5.8±0.2
0.8D Cable SMA-J
(in mm)
Structure
OUT
Without Probe
IN OUT
With Probe
Probe
IN
Standard Land Dimensions
1. Standard Pattern Dimensions
I/O pattern should be designed to match 50 ohm impedance
circuit.
Typical PCB material is glass epoxy (εr=4.8). Thickness is
1.0mm.
The solder resist should be printed except for the land
pattern on the PCB.
2. Standard Solder Stencil Mask Pattern
Follow standard solder stencil mask pattern to avoid the
possibility of solder being trapped under connector.
(in mm)
(in mm)
Standard Solder Stencil Mask Pattern
(Mask thickness 0.12mm)
Land
Electrode
1.740.5 0.5
0.5
1.3
2.8
4
1.74
2.9
4.14
1.1
2.7
3.44
1.1
2.7
0.28
2.14
2.7
1.3
2.48
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice 1
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice (Storage and Operating Condition)
1. Environment Conditions
(1) This product is designed for use in electrical
equipment in the environment (temperature,
humidity, atmospheric pressure, etc.)
specified in this approval drawing. It may not
be used in the following environments or under
the following conditions:
(a) Ambient air containing corrosive gas
(Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric
oxide gas, etc.)
(b) Ambient air containing volatile or
combustible gas
(c) In liquid (water, oil, chemical solution,
organic solvents, etc.)
(d) In environments with a high concentration of
airborne particles
(e) In direct sunlight
(f) Dusty conditions
(g) In freezing
(h) Other environments similar to the above
conditions
(2) Contact the manufacturer before using the
product in any of the above environments or
under any of the above conditions.
2. Storage
Store in manufacturer's package or tightly
re-closed box with the following conditions. Use
this product within 6 months after receipt. Check
the terminal solderability before use if the
product has been stored for more than 6 months.
Temperature: -10 to +40 degree C
Humidity: 15 to 85% RH
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
1
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice (Soldering and Mounting)
1. Reflow soldering
Soldering must be carried out without exceeding the
allowable soldering temperature and time shown within
the shaded area of Figure "Allowable Temperature and
Time of Reflow Soldering".
In case the soldering is repeated, the maximum time in
Figure "Allowable Temperature and Time of Reflow
Soldering" should be accumulated time. The standard
soldering conditions are shown in Figure "Reflow
Soldering Standard Conditions".
Follow standard solder stencil mask pattern to avoid the
possibility of solder being trapped under connector.
2. Soldering by soldering iron
Soldering by soldering iron should be carried out in
accordance to the following conditions.
Pre-heating Temperature 150D
Time 60 to 120 s.
Soldering Temperature (at the tip of the soldering
iron) less than 350D
Time less than 3 s.
3. We cannot warrant against mishaps caused by any use
of this product that deviates from allowable temperature
and time of reflow soldering.
4. In soldering, do not apply excessive mechanical force to
terminals or leads greater than specified in the drawing.
5. Please note the following in case of soldering terminals
or leads of the product.
(1) Use Rosin based flux, but not with strong acid flux
(Chlorine content should be less than 0.20wt%).
(2) Flux should be thoroughly cleaned from connector to
prevent possible deterioration of electrical
characteristics.
6. Please mount this product at the position so that stress
by wrap and/or bend of the PCB may not apply to it.
7. Please avoid the cleaning of this product.
Allowable Temperature and Time of Reflow Soldering
Reflow Soldering Standard Conditions
260
250
240
230
220
210
200
190
180
240
230
150
100
25
0
Pre-heating 150±20D
Time (sec.)
Time (sec.)
30 sec. max.
30-50 sec.60-120 sec.
Peak temperature 250±5D
Temperature (D)
Temperature (D)
Solder: Sn-3.0Ag-0.5Cu
Measuring point of temperature: In-Out Terminals of the Device
Reflow Soldering: Both Convection and Infrared Rays
: Hot Air
: Hot Plate
30 60 90 120 150 180 210 240
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice 1
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Notice(Handling)
2. L Type Probe with Locking Function
(MXHS83QE3000, MXHS83QH3000)
Do not try to pull the cable, when a connector with a
coaxial cable is handled.
Do not give a twisted torque to the cable and connector.
Mechanical stress:
The stress to the connector should be limited as figure
shown right.
(1) Stress to the housing.
Stress A and B: 0.5N max.
(2) Stress to the outer sleeve.
Stress C: 0.6N max.
Stress D: 0.6N max.
(3) Cable pull strength.
Stress E: 0.5N max.
3. Usage Condition
(1) Do not apply electrical voltage greater than specified
in the catalog. It might cause degradation or
destruction of the product. Even if it endures during a
short time, long time qualification is not guaranteed.
(2) Confirm that product perfomance is not influenced
with any other components or materials which
directly contact products.
4. Handling
Do not apply excessive shock or load to subassembly
products such as soldered printed circuit board in case
handling or transporting.
Mechanical Stress after Engagement
AB
C
D
E
MM8130-2600
PCB
1. Automatic Measurement Probe (MM126036)
Automatic measurement probe (MM126036) should be
used on the condition in Fig. 1 for good connection
without any damages.
The engagement strokes from the flange to the tip of
probe is 18.28mm to 19.78mm with vertical (0+/-2 degree)
direction.
Insertion the Automatic Measurement Probe
(MM126036) in Receptacle (MM8130-2600)
Fig. 1
0±2°
(in mm)
18.28(Minimum Point for Using)
19.78(Maximum Point for Using)
1.5 (Using Range)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Package
1
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dimensions of Reel
Part Number
MM8130-2600RB8
Tolerance
A
330
±2.0
B
13
±0.5
C
21
±0.8
D
2
±0.5
N (min.)
Dia. 100
±1.0
W1
9.4
±1.0
W2 (max.)
13.4
±1.0
D
W1
W2
A
N
(in mm)
B
C
Dimensions of Taping
A
2.8±0.1 B
2.8±0.1 W
8±0.2 E
1.75±0.1 F
3.5±0.1 K
1.6±0.1
D0
Dia.1.5+0.1
P0
4±0.1 P1
4±0.1 P2
2±0.1 T
0.25±0.05 (in mm)
P2 P0
P1
D0
A
T
K
B
EF
W
5°max. 5°max.
Minimum Quantity
MM8130-2600RB8: 330 mm dia.reel/8000 pcs.
MM8130-2600B: Bulk/free
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
2
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Microwave Coaxial Connectors
Microwave Coaxial Connectors with Switch SWD Type
Features
1. The coaxial connector with switch is very useful
for characteristic measurement of hand held phone
and microwave circuit.
2. It is possible to switch the line connection and
disconnection easily by special probe.
3. Small size, low profile, size 3x3x1.75mm (LxWxH)
4. Excellent characteristics, low IL 0.2dB max.
V.S.W.R. 1.3 max. Isolation 15dB min. (DC to
6GHz)
5. Surface mountable and reflow solderable
6. Tape package available
Applications
Cellular phone, W-LAN, Other wireless and measurement
equipment
C Terminal
Side R Terminal
Side
3±0.1
dia 2.1±0.2
1.75±0.15
0.8±0.2
3±0.1
B
B
A A
IN
OUT
GROUND
(in mm)
Part Number Rated
Voltage
(Vrms)
Contact
Resistance
(max.) (ohm)
Withstand
Voltage
(Vrms)
Insulation
Resistance
(M ohm)
Durability
(cycles) Frequency
Rating
Temperature
Range
(degree C) VSWR Insertion
Loss (On)
(dB)
Isolation (Off)
(dB) Inner
Electrode (C)
Inner
Electrode (R)
(material)
Outer
Electrode
(material)
MM8430-2610
250 0.05 300 (AC) 500 500 to 6GHz -40 to +85 1.2 max.
(DC to 3GHz) 0.1 max.
(DC to 3GHz) 20 min.
(DC to 3GHz) Stainless Steel
Gold plated Copper Alloy
Gold plated Copper Alloy
Silver plated
Impedance: 50ohm
Measurement Probe Dimensions
MM126036
2-Dia. 2.6±0.15
Dia.19.68
±0.2
Dia. 10±0.2
16±0.15
9±0.2
11.85±0.2 21.65±0.3
(13.35)
(4.02)
Dia. 5.4±0.1
Dia. 7±0.1
Dia. 3.8±0.1
(33.5)
(in mm)
SMA-J
MXHS83QE3000
300±4
(32)
(7.1) (26)
3.1±0.1
9±0.2
15.2±0.2
Dia. 3.2±0.1
Dia. 4.3±0.1
Dia. 5.8±0.2
SMA-J
0.8D Cable
(in mm)
Continued on the following page.
MM8430-2610
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
2
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Measurement Probe Dimensions
300±4
(32) (26)
3.1±0.1
13.9±0.2
12±0.2
20.1±0.2
Dia. 3.4±0.1
Dia. 3.2±0.1
Dia. 4.3±0.1
Dia. 5.8±0.2
0.8D Cable SMA-J
(in mm)
Structure
OUT
Without Probe
IN OUT
With Probe
Probe
IN
Standard Land Dimensions
1. Standard pattern dimensions
I/O pattern should be designed to match 50 ohm impedance
circuit.
Typical PCB material is glass epoxy (εr=4.8). Thickness is
1.0mm.
The solder resist should be printed except for the land
pattern on the PCB.
2. Standard solder stencil mask pattern
Follow Standard solder stencil mask pattern to avoid the
possibility of solder being trapped under connector.
4
2
1
0.5
(1.5)
Land
Electrode
(1.5)
1.74
1
1
3
2.1
3.1
4.1
Through hole
(in mm)
(in mm)
0.5
2
3.5
2.3
1
3
3.5
The Standard solder stencil mask pattern
(Mask thickness 0.15mm)
MXHS83QH3000
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
2
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice (Storage and Operating Condition)
1. Environment Conditions
(1) This product is designed for use in electrical
equipment in the environment (temperature,
humidity, atmospheric pressure, etc.)
specified in this approval drawing. It may not
be used in the following environments or under
the following conditions:
(a) Ambient air containing corrosive gas
(Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric
oxide gas, etc.)
(b) Ambient air containing volatile or
combustible gas
(c) In liquid (water, oil, chemical solution,
organic solvents, etc.)
(d) In environments with a high concentration of
airborne particles
(e) In direct sunlight
(f) Dusty conditions
(g) In freezing
(h) Other environments similar to the above
conditions
(2) Contact the manufacturer before using the
product in any of the above environments or
under any of the above conditions.
2. Storage
Store in manufacturer's package or tightly
re-closed box with the following conditions. Use
this product within 6 months after receipt. Check
the terminal solderability before use if the
product has been stored for more than 6 months.
Temperature: -10 to +40 degree C
Humidity: 15 to 85% RH
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
2
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice (Soldering and Mounting)
1. Reflow soldering
Soldering must be carried out without exceeding the
allowable soldering temperature and time shown within
the shaded area of Figure "Allowable Temperature and
Time of Reflow Soldering".
In case the soldering is repeated, the maximum time in
Figure "Allowable Temperature and Time of Reflow
Soldering" should be accumulated time. The standard
soldering conditions are shown in Figure "Reflow
Soldering Standard Conditions".
Follow standard solder stencil mask pattern to avoid the
possibility of solder being trapped under connector.
2. Soldering by soldering iron
Soldering by soldering iron should be carried out in
accordance to the following conditions.
Pre-heating Temperature 150D
Time 60 to 120 s.
Soldering Temperature (at the tip of the soldering
iron) less than 350D
Time less than 3 s.
3. We cannot warrant against mishaps caused by any use
of this product that deviates from allowable temperature
and time of reflow soldering.
4. In soldering, do not apply excessive mechanical force to
terminals or leads greater than specified in the drawing.
5. Please note the following in case of soldering terminals
or leads of the product.
(1) Use Rosin based flux, but not with strong acid flux
(Chlorine content should be less than 0.20wt%).
(2) Flux should be thoroughly cleaned from connector to
prevent possible deterioration of electrical
characteristics.
6. Please mount this product at the position so that stress
by wrap and/or bend of the PCB may not apply to it.
7. Please avoid the cleaning of this product.
Allowable Temperature and Time of Reflow Soldering
Reflow Soldering Standard Conditions
260
250
240
230
220
210
200
190
180
240
230
150
100
25
0
Pre-heating 150±20D
Time (sec.)
Time (sec.)
30 sec. max.
30-50 sec.60-120 sec.
Peak temperature 250±5D
Temperature (D)
Temperature (D)
Solder: Sn-3.0Ag-0.5Cu
Measuring point of temperature: In-Out Terminals of the Device
Reflow Soldering: Both Convection and Infrared Rays
: Hot Air
: Hot Plate
30 60 90 120 150 180 210 240
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
2
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
2. L Type Probe with Locking Function
(MXHS83QE3000, MXHS83QH3000)
Avoid pulling cable when probe is locked into connector.
Avoid twisting probe or cable when engaging or
disengaging from connector.
Mechanical stress:
The stress to the connector should be limited as figure
shown right.
(1) Stress to the housing.
Stress A and B: 0.5N max.
(2) Stress to the outer sleeve.
Stress C: 0.6N max.
Stress D: 0.6N max.
(3) Cable pull strength.
Stress E: 0.5N max.
3. Usage Condition
(1) Do not apply electrical voltage greater than specified
in the catalog. It might cause degradation or
destruction of the product. Even if it endures during a
short time, long time qualification is not guaranteed.
(2) Confirm that product performance is not influenced
with any other components or materials which
directly contact products.
4. Handling
Avoid excessive stress when handling and transporting
printed circuit board after connector and/or assembly
has been secured to PCB.
Mechanical stress after engagement
AB
C
D
E
MM8430-2610
PCB
Notice (Handling)
1. Automatic Measurement Probe (MM126036)
Automatic measurement probe (MM126036) should be
used under conditions in Fig. 1 for good connection
without any damages.
The engagement strokes from the flange to the tip of
probe is 18.28mm to 19.78mm with vertical (0±2°)
direction.
Insertion the Automatic Measurement Probe
(MM126036) in Receptacle (MM8430-2610)
Fig. 1
0±2°
18.28(Minimum Point for Using)
19.78(Maximum Point for Using)
1.5 (Using Range)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Package
2
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dimensions of Reel
Murata Part Number
MM8430-2610RA1
MM8430-2610RB3
TOLERANCE
A
178
330
±2.0
B
13
13
±0.5
C
21
21
±0.8
D
2
2
±0.5
N (min.)
Dia. 50
Dia. 50
W1
13.5
13.5
±1.5
W2 (max.)
18.5
18.5
DBW1
W2
C
A
N
(in mm)
Dimensions of Taping
A
3.4±0.1
B
3.4±0.1
W
12±0.2
E
1.75±0.1
F
5.5±0.1
K
2.0±0.15
D0
Dia.1.5+0.1
P0
4±0.1
P1
8±0.1
P2
2±0.1
T
0.3±0.05
P2 P0 D0 T
B
EF
W
P1 A K
(in mm)
3 degree Max.3 degree Max.
Minimum Quantity
MM8430-2610RA1: dia.180 mm reel/1000 pcs.
MM8430-2610RB3: dia.330 mm reel/3000 pcs.
MM8430-2610B: Bulk/free
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
3
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Microwave Coaxial Connectors
Ultra Miniature SMT HSC Type
Features
1. The mating height is only 1.2mm maximum by new
mechanical design. Suitable for low profile design.
2. New mating mechanical desigh makes stable feeling
connection.
3. Soft and ultra thin 0.81mm diameter flexible coaxial
cables is available.
4. High performance with wide frequency range(DC to
6GHz). VSWR at 3GHz to 6GHz is 1.45 maximum.
Applications
Portable telephone, cordless telephone(analog and
digital), GPS, and other microwave radio and
measurement equipment.
2.06
0.85
(2.1 dia.)
2.34±0.5
(in mm)
MXHP
2
2
0.6
1.5 Dia.
0.8 Dia.
0.7 0.4
1.4
0.5
1.52
Tolerances Unless
Otherwise Specified: ±0.2
(in mm)
Hot Terminal
Ground Terminal
MM4829-2702
Part Number Rated
Voltage
(V)
Contact
Resistance (max.)
(ohm)
Withstanding
Voltage
(rms)
Insulation
Resistance (min.)
(M ohm)
Durability
(cycles)
Frequency
Rating
(GHz)
Temperature
Range
(degree C) VSWR Center Contact Outer Contact Insulator
MM4829-2702
250 0.020 300 (AC) 500 30 to 6.0 -40 to +85 1.3 max.
(DC to 3GHz) Copper Alloy
Gold plated Copper Alloy
Silver plated Engineering plastic
Impedance: 50ohm
Measurement Adapter Dimensions (for Receptacle)
SMA-J
Dia. 5.33±0.2
13.3±0.15
(4.3)
2±0.1
HSC-Female
Dia. 2.5±0.1
Dia. 3.0±0.1
Dia. 5.33±0.1
MM121490 (Hand measurement)
17.96±0.2
2±0.2 7.91±0.1
5.65±0.1
SMA-J
HSC-CONTACT
(in mm)
Dia. 3±0.1
Dia. 5.33±0.1
Dia. 6.5±0.2
Dia. 5.33±0.2
MM121491 (Automatic measurement)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
3
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
MM121500 (Hand measurement)
12.95±0.2
8.55±0.4 0.4±0.05
Dia. 5.33±0.2
Dia. 1.5±0.02
SMA-J
HSC-Male
(in mm)
Cable Length Tolerance
20
100
Over
500
1000
100
Cable Length L (mm) Dimensional
Tolerance (mm)
500
Less than
1000
±3
±4
±10
+2% of L
–0% of L
L
Disengagement Tool (Part Number: M19100)
6.0 45
35 3
2.9
5
HSC
Dia. 2.7
(in mm)
Profile Dimensions
1.85 max.
1.2 max.
(in mm)
Continued on the following page.
Measurement Adapter Dimensions (for Cable Assembly)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
3
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Land Pattern Dimensions
1. Standard pattern dimensions
I/O pattern should be designed to match 50 ohm impedance
circuit.
Typical PCB material is glass epoxy (εr=4.8). Thickness is
1.0mm.
The solder resist should be printed except for the land
pattern on the PCB.
2. Standard solder stencil mask pattern
Follow Standard solder stencil mask pattern to avoid the
possibility of solder being trapped under connector.
(in mm)
(in mm)
The standard solder stencil mask drawing
(Mask thickness 0.12mm)
2.5
1.5
1.34 0.5
0.7 0.75
1.25 1.25
(1.81)
1.58 0.54
0.38
0.6
(1.5)
(1.74)
(1.5) Land
Electrode
2.5
1.5 0.38
2.4
0.9
0.84 0.82
0.36
Ground
Hot
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
3
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice (Storage and Operation Condition)
1. Environment Conditions
(1) This product is designed for use in electrical
equipment in the environment (temperature,
humidity, atmospheric pressure, etc.)
specified in this approval drawing. It may not
be used in the following environments or under
the following conditions:
(a) Ambient air containing corrosive gas
(Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric
oxide gas, etc.)
(b) Ambient air containing volatile or
combustible gas
(c) In liquid (water, oil, chemical solution,
organic solvents, etc.)
(d) In environments with a high concentration of
airborne particles
(e) In direct sunlight
(f) Dusty conditions
(g) In freezing
(h) Other environments similar to the above
conditions
(2) Contact the manufacturer before using the
product in any of the above environments or
under any of the above conditions.
2. Storage
Store in manufacturer's package or tightly
re-closed box with the following conditions. Use
this product within 6 months after receipt. Check
the terminal solderability before use if the
product has been stored for more than 6 months.
Temperature: -10 to +40 degree C
Humidity: 15 to 85% RH
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
3
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice (Soldering and Mounting)
1. Reflow soldering
Soldering must be carried out without exceeding the
allowable soldering temperature and time shown within
the shaded area of Figure "Allowable Temperature and
Time of Reflow Soldering".
In case the soldering is repeated, the maximum time in
Figure "Allowable Temperature and Time of Reflow
Soldering" should be accumulated time. The standard
soldering conditions are shown in Figure "Reflow
Soldering Standard Conditions".
Use the Pattern and Metal mask pattern is illustrated in
details.
Follow standard solder stencil mask pattern to avoid the
possibility of solder being trapped under connector.
2. Soldering by soldering iron
Soldering by soldering iron should be carried out in
accordance to the following conditions.
Pre-heating Temperature 150D
Time 60 to 120 s.
Soldering Temperature (at the tip of the soldering
iron) less than 350D
Time less than 3 s.
3. We cannot warrant against mishaps caused by any use
of this product that deviates from allowable temperature
and time of reflow soldering.
4. In soldering, do not apply excessive mechanical force to
terminals or leads greater than specified in the drawing.
5. Please note the following in case of soldering terminals
or leads of the product.
(1) Use Rosin based flux, but not with strong acid flux
(Chlorine content should be less than 0.20wt%).
(2) Flux should be thoroughly cleaned from connector
to prevent possible deterioration of electrical
characteristics.
6. Please mount this product at the position so that stress
by wrap and/or bend of the PCB may not apply to it.
7. Please dry out this product immediately after soldering
and cleaning.
Allowable Temperature and Time of Reflow Soldering
Reflow Soldering Standard Conditions
260
250
240
230
220
210
200
190
180
240
230
150
100
25
0
Pre-heating 150±20D
Time (sec.)
Time (sec.)
30 sec. max.
30-50 sec.60-120 sec.
Peak temperature 250±5D
Temperature (D)
Temperature (D)
Solder : Sn-3.0Ag-0.5Cu
Measuring point of temperature : In-Out Terminals of the Device
Reflow Soldering : Both Convection and Infrared Rays
: Hot Air
: Hot Plate
30 60 90 120 150 180 210 240
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
3
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Notice (Handling)
A
B
C
E
D
1. Usage Condition
(1) Do not apply electrical voltage greater than specified in
the drawing. It might cause degradation or destruction
of the product. Even if it endures during a short time,
long time qualification is not guaranteed.
(2) Confirm product's performance is not influenced by
contact of other components.
(3) Please contact the manufacturer beforehand, if the
product is to be used in frequently bent position.
2. Handling
(1) Avoid excessive stress when handling and transporting
printed circuit board after connector and/or assembly
has been secured to PCB.
(2) Do not try to pull the cable, when a connector with a
coaxial cable is handled.
(3) Disregarding the following notes could cause
mechanical damage and/or poor electrical performance.
3. Handling Instructions
(1) Cable is designed to fit only with MM4829-2702
receptacle. Any other receptacle cannot be used with
this cable.
(2) Disengagement:
Use tool P/N M19100 to insert or remove cable in a
vertical direction from receptacle. Avoid pulling only the
cable to prevent cable damage.
(3) Avoid twisting probe or cable when engaging or
disengaging from connector.
(4) Mechanical stress:
The stress to the connector should be limited as shown
in Figure 1.
(a) Stress to the housing.
Stress A and B: 5.0N max.
(b) Stress to the outer sleeve.
Stress C: 1.0N max.
Stress D: 1.0N max.
(c) Cable pull strength.
Stress E: 5.0N max.
Figure 1. Mechanical stress after engagement
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Package
3
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dimensions of Reel
Murata Part Number
MM4829-2702RA4
MM4829-2702RB0
TOLERANCE
A
180 +0/-3
330
±2.0
B
13
13
±0.2
C
21
21
±0.8
D
2
2
±0.5
N (min.)
Dia. 60 +1/0
Dia. 100
±1.0
W1
9±0.3
9.4
±1.0
W2 (max.)
11.4
13.4
±1.0
B
C
D
W1
W2
N
A
(in mm)
Dimensions of Taping
A
2.35±0.1
B
2.35±0.1
W
8±0.2
E
1.75±0.1
F
3.5±0.1
K
0.75±0.15
D0
Dia.1.5 +0.1
-0
P0
4±0.1
P1
4±0.1
P2
2±0.1
T
0.25±0.05
P2 P0 D0 T
B
EF
W
P1 A K
(in mm)
3°max.
3°max.
Minimum Quantity
MM4829-2702RA4: 180 mm dia. reel/4000 pcs.
MM4829-2702RB0: 330 mm dia. reel/10000 pcs.
MM4829-2702B: Bulk/free
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
4
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Microwave Coaxial Connectors
Miniature SMT GSC Type
Features
1. The mating height is only 2mm maximum by new
mechanical design. Suitable for low profile design.
2. New mating mechanical desigh makes stable feeling
connection.
3. Soft and ultra thin 0.8mm diameter flexible coaxial
cables is available.
4. High performance with wide frequency range(DC to
6GHz). VSWR at DC to 3GHz is 1.2 maximum. VSWR at
3GHz to 6GHz is 1.3 maximum.
Applications
Portable telephone, cordless telephone(analog and
digital), GPS, and other microwave radio and
measurement equipment.
ø2.55 1.5 2.8
3.5±0.5
(in mm)
Tolerances unless
otherwise specified : ±0.3
MXTK
0.15±0.03
(R0.15)
2.6
3
(R0.15)
2.6
30.12±0.03
Hot Terminal
Ground Terminal
0.5±0.1
ø1±0.1
2.1
2.3
0.5±0.1
0.15±0.03
ø2.1
1.15
Tolerances Unless
Otherwise Specified: ±0.2
(in mm)
MM9329-2700
Part Number Rated
Voltage
(V)
Contact
Resistance (max.)
(ohm)
Withstanding
Voltage
(rms)
Insulation
Resistance (min.)
(M ohm)
Durability
(cycles)
Frequency
Rating
(GHz)
Temperature
Range
(degree C) VSWR Center Contact Outer Contact Insulator
MM9329-2700
250 0.015 300 (AC) 500 100 to 6.0 -40 to +90 1.2 max.
(DC to 3GHz) Copper Alloy
Gold plated Copper Alloy
Silver plated Engineering plastic
Impedance: 50ohm
Measurement Adapter Dimensions (for Receptacle)
(in mm)
MM121470 (Hand measurement) MM121471 (Automatic measurement)
SMA-JACK
13.4
5.08 7.4
4.4
2.1
ø5.33
ø5.33
ø2.55
ø3
ø4.6
SMA-JACK
18.24
5.08 2 8.19
2.3
ø5.33
ø6.5
ø4.06
ø5.33
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
4
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
SMA-JACK
13.4
8.55
5.08
0.85
ø2.1
ø5.33
ø5.33
MM121480
(in mm)
Cable Length Tolerance
L
40
100
Over
500
1000
100
Cable Length L (mm) ()
L must be 20mm Min.
Dimensional
tolerance (mm)
500
Till
1000
±3
±4
±10
+2% of L
–0% of L
Disengagement Tool (Part Number: M22001)
3.9±0.6
2.3±0.6
0.5±0.6
45±2
35±27.95±2
(Dia. 8)
(C1)
(in mm)
Profile Dimensions
2.8 max.2max.
0.7 min.
(in mm)
Continued on the following page.
Measurement Adapter Dimensions (for Cable Assembly)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
4
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Land Pattern Dimensions
1. Standard pattern dimensions
I/O pattern should be designed to match 50 ohm impedance
circuit.
Typical PCB material is glass epoxy (εr=4.8). Thickness is
1.0mm
The solder resist should be printed except for the land
pattern on the PCB.
2. Standard solder stencil mask pattern
Follow Standard solder stencil mask pattern to avoid the
possibility of solder being trapped under connector.
(in mm)
(in mm)
The standard solder stencil mask drawing
(Mask thickness 0.15mm)
21.9
(2.37) 2.5
1.51.5
1.05 1.05
ø1 (3-ø0.6)
(Through Holes)
5.2
3.8
2.3
1
0.6
0.6
(1.5)(1.74)(1.5)
0.6
1.5
1.05 1.05 0.45
0.6
2.3
3.3
Land
Electrode
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
4
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice (Storage and Operation Condition)
1. Environment Conditions
(1) This product is designed for use in electrical
equipment in the environment (temperature,
humidity, atmospheric pressure, etc.)
specified in this approval drawing. It may not
be used in the following environments or under
the following conditions:
(a) Ambient air containing corrosive gas
(Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric
oxide gas, etc.)
(b) Ambient air containing volatile or
combustible gas
(c) In liquid (water, oil, chemical solution,
organic solvents, etc.)
(d) In environments with a high concentration of
airborne particles
(e) In direct sunlight
(f) Dusty conditions
(g) In freezing
(h) Other environments similar to the above
conditions
(2) Contact the manufacturer before using the
product in any of the above environments or
under any of the above conditions.
2. Storage
Store in manufacturer's package or tightly
re-closed box with the following conditions. Use
this product within 6 months after receipt. Check
the terminal solderability before use if the
product has been stored for more than 6 months.
Temperature: -10 to +40 degree C
Humidity: 15 to 85% RH
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
4
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice (Soldering and Mounting)
1. Reflow soldering
Soldering must be carried out without exceeding the
allowable soldering temperature and time shown within
the shaded area of Figure "Allowable Temperature and
Time of Reflow Soldering".
In case the soldering is repeated, the maximum time in
Figure "Allowable Temperature and Time of Reflow
Soldering" should be accumulated time. The standard
soldering conditions are shown in Figure "Reflow
Soldering Standard Conditions".
Follow recommended solder stencil mask pattern to
avoid the possibility of solder being trapped under
connector.
2. Soldering by soldering iron
Soldering by soldering iron should be carried out in
accordance to the following conditions.
Pre-heating Temperature 150D
Time 60 to 120 s.
Soldering Temperature (at the tip of the soldering
iron) less than 350D
Time less than 3 s.
3. We cannot warrant against mishaps caused by any use
of this product that deviates from allowable temperature
and time of reflow soldering.
4. In soldering, do not apply excessive mechanical force to
terminals or leads greater than specified in the drawing.
5. Please note the following in case of soldering terminals
or leads of the product.
(1) Use Rosin based flux, but not with strong acid flux
(Chlorine content should be less than 0.20wt%).
(2) Flux should be thoroughly cleaned from connector
to prevent possible deterioration of electrical
characteristics.
6. Please mount this product at the position so that stress
by wrap and/or bend of the PCB may not apply to it.
7. Please dry out this product immediately after soldering
and cleaning.
Allowable Temperature and Time of Reflow Soldering
Reflow Soldering Standard Conditions
260
250
240
230
220
210
200
190
180
240
230
150
100
25
0
Pre-heating 150±20D
Time (sec.)
Time (sec.)
30 sec. max.
30-50 sec.60-120 sec.
Peak temperature 250±5D
Temperature (D)
Temperature (D)
Solder : Sn-3.0Ag-0.5Cu
Measuring point of temperature : In-Out Terminals of the Device
Reflow Soldering : Both Convection and Infrared Rays
: Hot Air
: Hot Plate
30 60 90 120 150 180 210 240
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
4
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Notice (Handling)
1. Usage Condition
(1) Do not apply electrical voltage greater than specified in
the drawing. It might cause degradation or destruction
of the product. Even if it endures during a short time,
long time qualification is not guaranteed.
(2) Confirm product's performance is not influenced by
contact of other components.
(3) Please contact the manufacturer beforehand, if the
product is to be used in frequently bent position.
2. Handling
(1) Avoid excessive stress when handling and transporting
printed circuit board after connector and/or assembly
has been secured to PCB.
(2) Do not try to pull the cable, when a connector with a
coaxial cable is handled.
(3) Disregarding the following notes could cause
mechanical damage and/or poor electrical performance.
3. Handling Instructions
(1) Cable is designed to fit only with MM9329-2700
receptacle. Any other receptacle cannot be used with
this cable.
(2) Disengagement:
Use tool P/N M22001 to insert or remove cable in a
vertical direction from receptacle. Avoid pulling only the
cable to prevent cable damage.
(3) Avoid twisting probe or cable when engaging or
disengaging from connector.
(4) Mechanical stress:
The stress to the connector should be limited as shown
in Figure 1.
(a) Stress to the housing.
Stress A and B: 5.0N max.
(b) Stress to the outer sleeve.
Stress C: 3.0N max.
Stress D: 2.0N max.
(c) Cable pull strength.
Stress E: 5.0N max.
Figure 1. Mechanical Stress after Engagement
A
B
C
D
E
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Package
4
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dimensions of Reel
Murata Part Number
MM9329-2700RA1
MM9329-2700RB5
TOLERANCE
A
178
330
±2.0
B
13
13
±0.5
C
21
21
±0.8
D
2
2
±0.5
N (min.)
Dia. 50
Dia. 50
W1
13.5
13.5
±1.5
W2 (max.)
18.5
18.5
DBW1
W2
C
A
N
(in mm)
Dimensions of Taping
A
3.4±0.1
B
3.4±0.1
W
12±0.2
E
1.75±0.1
F
5.5±0.1
K
1.25±0.15
D0
Dia.1.5 +0.1
-0
P0
4±0.1
P1
8±0.1
P2
2±0.1
T
0.3±0.05
P2 P0 D0 T
B
EF
W
P1 A K
(in mm)
3°max.3°max.
Minimum Quantity
MM9329-2700RA1: dia.180 mm reel/1000 pcs.
MM9329-2700RB5: dia.330 mm reel/5000 pcs.
MM9329-2700B: Bulk/free
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
5
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Microwave Coaxial Connectors
SMT FSC Type
Features
1. High engagement
2. Miniature (LxWxH: 3.4x3.4x1.5mm) for High
density mounting
3. Low profile (3.0mm max.)
4. SMD and reflow soldering applicable
5. Taping package applicable
6. Mountable by automatic placer
7. High performance (V.S.W.R. 1.3 max. at 3GHz)
8. Matched with ultra-thin FEP coaxial cables
(0.8mm dia)
Applications
Portable telephone, mobile telephone, cordless
telephone, GPS, and other microwave radio and
measurement equipment.
2.42.4ø2.2
3.8
Tolerances Unless
Otherwise Specified:±0.3
(in mm)
MXFG76_/MXFK81_
2.4
1
2.4
3.4
3.4
0.5
1.5
0.5
Hot Terminal
Ground Terminal
Tolerances Unless
Otherwise Specified:±0.2
(in mm)
MM7329-2700
3.4 3.2
0.2max
0.1max
0.5 2.4
1.5
2.4 0.4
0.5
0.5
2.9
: Hot Terminal
: Ground Terminal TOLERANCES UNLESS
OTHERWISE SPECIFIED : ±0.2
(in mm)
(1)
(2)
(3)
MM7329-2702
Part Number Rated
Voltage
(V)
Contact
Resistance (max.)
(ohm)
Withstanding
Voltage
(rms)
Insulation
Resistance (min.)
(M ohm)
Durability
(cycles)
Frequency
Rating
(GHz)
Temperature
Range
(degree C) VSWR Center Contact Outer Contact Insulator
MM7329-2700
250 0.015 300 (AC) 500 50 to 3.0 -40 to +90 1.3 max. Copper Alloy
Gold plated Copper Alloy
Gold plated Engineering plastic
MM7329-2702
250 0.015 300 (AC) 500 50 to 3.0 -40 to +90 1.3 max. Copper Alloy
Gold plated Copper Alloy
Gold plated Engineering plastic
Impedance: 50ohm
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
5
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
for Receptacle
5.08 4.4
2.5
1.33
13.93
ø5.33
2.5
ø2.16
ø5.33
SMA-JACK
(in mm)
MM121454 (For FSC type receptacle)
for Cable Assembly
0.76
SMA-JACK
5.08 1.48
8.64
14.06
ø5.33
ø3.1
ø5.33
(in mm)
MM121460 (For FSC type cable assembly)
Land Pattern Dimensions
MM7329-2700B
· Pattern should be designed to match 50 ohm impedance circuit.
· Typical PCB material is glass epoxy (εr=4.8). Thickness is 1.0mm.
· The solder resist should be printed except for the land pattern on the PCB.
(Note)
5.2
4.2
3.4
2.4
2.52.57
1.7
2.2
3.4
0.9
1
(1.5) (1.74)
0.6 (1.5)
3-ø0.6
(Through hole)
ø1
Land
Electrode
(in mm)
MM7329-2702B
5.2
4.2
2.4
1
0.6
ø0.6
1.2
2.4
0.3
1.7
0.5
2.5
(1.74)
(1.5) (1.5)
Electrode
(in mm)
Land
· Pattern should be designed to match 50 ohm impedance circuit.
· Typical PCB material is glass epoxy (εr=4.8). Thickness is 1.0mm.
· The solder resist should be printed except for the land pattern on the PCB.
(Note)
Cable Length Tolerance
L
Cable Length L(mm)()Dimensional
tolerance(mm)
Over Till
40
100
500
1000
100
500
1000
±3
±4
+2% of L
0% of L
±10
L must be 40mm Min.
Profile Dimensions
Profile
Clearance for mating (in mm)
3max.
4.2 min.
Continued on the following page.
Measurement Adapter Dimensions
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
5
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Disengagement Tool
5±0.6
5±0.6
20±2
5±1
0.5±0.62±0.6
3.5±0.6
ø2.7T1
45±2
(10)
(3)
(105) M19004
M19000 (for MM7329-2700) How to use tool (for MM7329-2700)
M19004 (for MM7329-2702) How to use tool (for MM7329-2702)
(in mm)
(in mm)
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
5
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice (Storage and Operating Condition)
1. Environment Conditions
(1) This product is designed for use in electrical
equipment in the environment (temperature,
humidity, atmospheric pressure, etc.)
specified in this approval drawing. It may not
be used in the following environments or under
the following conditions:
(a) Ambient air containing corrosive gas
(Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric
oxide gas, etc.)
(b) Ambient air containing volatile or
combustible gas
(c) In liquid (water, oil, chemical solution,
organic solvents, etc.)
(d) In environments with a high concentration of
airborne particles
(e) In direct sunlight
(f) Dusty conditions
(g) In freezing
(h) Other environments similar to the above
conditions
(2) Contact the manufacturer before using the
product in any of the above environments or
under any of the above conditions.
2. Storage
Store in manufacturer's package or tightly
re-closed box with the following conditions. Use
this product within 6 months after receipt. Check
the terminal solderability before use if the
product has been stored for more than 6 months.
Temperature: -10 to +40 degree C
Humidity: 15 to 85% RH
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
5
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice (Soldering and Mounting)
1. Reflow soldering
Soldering must be carried out without exceeding the
allowable soldering temperature and time shown within
the shaded area of Figure "Allowable Temperature and
Time of Reflow Soldering".
In case the soldering is repeated, the maximum time in
Figure "Allowable Temperature and Time of Reflow
Soldering" should be accumulated time. The standard
soldering conditions are shown in Figure "Reflow
Soldering Standard Conditions".
Follow Standard pattern dimensions.
2. Soldering by soldering iron
Soldering by soldering iron should be carried out in
accordance to the following conditions.
Pre-heating Temperature 150D
Time 60 to 120 s.
Soldering Temperature (at the tip of the soldering
iron) less than 350D
Time less than 3 s.
3. We cannot warrant against mishaps caused by any use
of this product that deviates from allowable temperature
and time of reflow soldering.
4. In soldering, do not apply excessive mechanical force to
terminals or leads greater than specified in the drawing.
5. Please note the following in case of soldering terminals
or leads of the product.
(1) Use Rosin based flux, but not with strong acid flux
(Chlorine content should be less than 0.20wt%).
(2) Flux should be thoroughly cleaned from connector to
prevent possible deterioration of electrical
characteristics.
6. Please mount this product at the position so that stress
by wrap and/or bend of the PCB may not apply to it.
7. Please dry out this product immediately after soldering
and cleaning.
Allowable Temperature and Time of Reflow Soldering
Reflow Soldering Standard Conditions
260
250
240
230
220
210
200
190
180
240
230
150
100
25
0
Pre-heating 150±20D
Time (sec.)
Time (sec.)
30 sec. max.
30-50 sec.60-120 sec.
Peak temperature 250±5D
Temperature (D)
Temperature (D)
Solder: Sn-3.0Ag-0.5Cu
Measuring point of temperature: In-Out Terminals of the Device
Reflow Soldering: Both Convection and Infrared Rays
: Hot Air
: Hot Plate
30 60 90 120 150 180 210 240
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Notice
5
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Notice (Handling)
1. Usage Condition
(1) Do not apply electrical voltage greater than specified in
the drawing. It might cause degradation or destruction
of the product. Even if it endures during a short time,
long time qualification is not guaranteed.
(2) Confirm product's performance is not influenced by
contact of other components.
(3) Please contact the manufacturer beforehand, if the
product is to be used in frequently bent position.
2. Handling
(1) Avoid excessive stress when handling and transporting
printed circuit board after connector and/or assembly
has been secured to PCB.
(2) Do not try to pull the cable, when a connector with a
coaxial cable is handled.
(3) Disregarding the following notes could cause
mechanical damage and/or poor electrical performance.
3. Handling Instructions
(1) Cable is designed to fit only with MM7329-2700 and
MM7329-2702 receptacles. Any other receptacle can
not be used with this cable.
(2) Disengagement:
Use tool P/N M19000 (for MM7329-2700) or M19004
(for MM7329-2702) to insert or remove cable in a
vertical direction from receptacle. Avoid pulling only the
cable to prevent cable damage.
(3) Avoid twisting probe or cable when inserting or
removing from receptacle.
(4) Mechanical stress:
The stress to the connector should be limited as shown
in Figure 1.
(a) Stress to the housing.
Stress A and B: 4.9N max.
(b) Stress to the outer sleeve.
Stress C: 2.94N max.
Stress D: 1.96N max.
(c) Cable pull strength.
Stress E: 7.84N max. (for MM7329-2700)
4.9N max. (for MM7329-2702)
Figure 1. Mechanical Stress after Engagement
ABE
DC
B
E
DC
(MM7329-2700)
(MM7329-2702)
A
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Package
5
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dimensions of Reel
MM7329-2700RA1/RB4
Murata Part Number
MM7329-2700RA1
MM7329-2700RB4
TOLERANCE
A
178
330
±2.0
B
13
13
±0.5
C
21
21
±0.8
D
2
2
±0.5
N (min.)
Dia. 50
Dia. 50
W1
13.5
13.5
±1.5
W2 (max.)
18.5
18.5
DBW1
W2
C
A
N
(in mm)
MM7329-2702RAB/RB2
Murata Part Number
MM7329-2702RAB
MM7329-2702RB2
TOLERANCE
A
178
330
±2.0
B
13
13
±0.5
C
21
21
±0.8
D
2
2
±0.5
N (min.)
Dia. 50
Dia. 50
W1
13.5
13.5
±1.5
W2 (max.)
18.5
18.5
DBW1
W2
C
A
N
(in mm)
Dimensions of Taping
P2 P0 D
(in mm)
T
P1 A
W
FE
B
K
A
3.9±0.1 B
3.7±0.1 W
12±0.2 D
ø1.5 E
1.75±0.1 F
5.5±0.1 K
3±0.15 P0
4±0.1
+0.1
0
P1
8±0.1 P2
2±0.1 T
0.3±0.05
Minimum Quantity
MM7329-2700RA1: dia.180 mm reel/1000 pcs.
MM7329-2700RB4: dia.330 mm reel/4000 pcs.
MM7329-2700B: Bulk/free
MM7329-2702RAB: dia.180 mm reel/ 500 pcs.
MM7329-2702RB2: dia.330 mm reel/2000 pcs.
MM7329-2702B: Bulk/free
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Miniaturized Microwave Coaxial Connector Cable List
Material
No. and Dia.
Total Dia.
Material
Melting point
(Reference only)
Total Dia.
Material
Dia. of wire
Total Dia.
Material
Nominal
thickness
Color
dB/m at 1GHz
dB/m at 2GHz
dB/m at 3GHz
dB/m at 4GHz
dB/m at 6GHz
Murata cable code
Assembly to FSC
Assembly to GSC
Assembly to HSC
-
(No./mm)
(mm)
-
Degree C
(mm)
-
(mm)
(mm)
-
(mm)
-
(mm)
(mm)
(Ohm)
(pF/m)
Inner
conductor
Insulator
Outer
conductor
Sheath
Overall Dia.
Minimum bending radius
Nominal impedance
Continuous operating voltage
Nominal static capacitance
Nominal
Insertion
loss
0.8D single shield
FEP cable
76
Silver coated copper
covered steel wire
1/0.26
0.26
FEP
285
0.8
Tin plated copper wire
0.05
1.05
FEP
0.1
Gray
1.24
6
50
300 Vrms max.
100
1.56
2.3
2.9
3.5
Suitable
Not Suitable
Not Suitable
0.4D single shield
FEP cable
81
Silver coated
copper wire
7/0.05
0.15
FEP
250
0.4
Tin plated copper wire
0.05
0.65
FEP
0.05
White
0.8
4.8
50
300 Vrms max.
100
3.0
4.26
5.24
6.18
Suitable
Not Suitable
Not Suitable
0.4D single shield
PFA cable
88
Silver coated copper
covered steel wire
1/0.15
0.15
PFA
302-310
0.43
Tin plated copper wire
0.05
0.68
PFA
0.075
White
0.83
3.3
50
300 Vrms max.
100
2.89
4.28
5.39
6.44
8.4
Not Suitable
Suitable
Not Suitable
0.4D single shield
PFA cable
92
Silver coated
copper wire
7/0.05
0.15
PFA
302-310
0.4
Tin plated copper wire
0.05
0.65
PFA
0.075
White
0.8
3.3
50
300 Vrms max.
100
3.0
4.26
5.24
6.18
9.17
Not Suitable
Suitable
Not Suitable
0.4D single shield
PFA cable
32
Silver coated
copper wire
7/0.05
0.15
PFA
302-310
0.4
Silver plated copper wire
0.05
0.65
PFA
0.075
White
0.8
3.3
50
300 Vrms max.
100
3.0
4.26
5.24
6.18
9.17
Not Suitable
Not Suitable
Suitable
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3
Note:
1. Export Control
<
For customers outside Japan
>
No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or
otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2)
goods or systems specially designed or intended for military end-use or utilization by military end-users.
<
For customers in Japan
>
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in
applications other than those specified in this catalog.
qAircraft equipment wAerospace equipment
eUndersea equipment rPower plant equipment
tMedical equipment yTransportation equipment (vehicles, trains, ships, etc.)
uTraffic signal equipment iDisaster prevention / crime prevention equipment
oData-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed above
3. Product specifications in this catalog are as of July 2007. They are subject to change or our products in it may be discontinued without advance notice. Please
check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product
engineers.
4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
International DivisionHead Office
http://www.murata.com/
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note O30E.pdf
07.9.3

Products

CONN HSC RCPT STR 50 OHM SMD
Available Quantity52099
Unit Price0.43
CONN MEAS PROBE FOR SWD/SWF CONN
Available Quantity483
Unit Price47.09
CONN MEAS PROBE FOR SWG TYP RCPT
Available Quantity141
Unit Price99.7
CONN HSC RCPT STR 50 OHM SMD
Available Quantity8269
Unit Price0.43
CONN MEAS PROBE FOR SMA PLUG
Available Quantity33
Unit Price67.68
CONN MEAS PROBE FOR SWD/SWF CONN
Available Quantity0
Unit Price117.72
CBL ASSY JSC RCPT 7.874"
Available Quantity0
Unit Price5.53841
CBL ASSY JSC RCPT-RCPT 0.787"
Available Quantity0
Unit Price9.99345
CONN GSC RCPT STR 50 OHM SMD
Available Quantity0
Unit Price0
CONN GSC RCPT STR 50 OHM SMD
Available Quantity0
Unit Price0
CBL ASSY TEST PROBE 3.937"
Available Quantity0
Unit Price0
CBL ASSY TEST PROBE 5.906"
Available Quantity0
Unit Price0
CBL ASSY TEST PROBE 7.874"
Available Quantity0
Unit Price0
CBL ASSY TEST PROBE 11.811"
Available Quantity0
Unit Price0
CBL ASSY HSC RCPT 7.874"
Available Quantity0
Unit Price0