Texas Instruments Supplier Page

TS3USB31E High-Speed USB Switch

Texas Instruments’ high bandwidth switch specially designed for switching high-speed USB signals

Texas Instruments' TS3USB31E is a high bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (1100MHz) of this switch allows signals to pass with minimum edge and phase distortion. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation and is compatible with various standards such as high-speed USB 2.0 (480Mbps). TS3USB31E

Features
  • Vcc operation 2.25V to 4.3V
  • 1.8V compatible control-pin inputs
  • IOFF supports partial power-down mode operation
  • ron = 10Ω maximum
  • Δron <0.35Ω typical
  • Cio(ON) = 6pF typical
  • Low power consumption (1μA maximum)
  • Wide –3-dB bandwidth = 1100MHz typical
Manufacturer P/N Digi-Key P/N Packaging Description  
TS3USB31ERSER 296-25362-2-ND Tape & Reel (TR) IC USB SWITCH 480MBPS 8QFN High-Capacitance MLCC Datasheet
296-25362-1-ND Cut Tape (CT)
296-25362-6-ND Digi-Reel®